scsi: firmware: xilinx: Add APIs for UFS PHY initialization

 - Add APIs for UFS PHY initialization.

 - Verify M-PHY TX-RX configuration readiness.

 - Confirm SRAM initialization and Set SRAM bypass.

 - Retrieve UFS calibration values.

Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-4-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

4 files changed, 158 insertions, 1 deletions

diff --git a/drivers/firmware/xilinx/Makefile b/drivers/firmware/xilinx/Makefile
index 875a53703c82..70f8f02f14a3 100644
--- a/drivers/firmware/xilinx/Makefile
+++ b/drivers/firmware/xilinx/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for Xilinx firmwares
 
-obj-$(CONFIG_ZYNQMP_FIRMWARE) += zynqmp.o
+obj-$(CONFIG_ZYNQMP_FIRMWARE) += zynqmp.o zynqmp-ufs.o
 obj-$(CONFIG_ZYNQMP_FIRMWARE_DEBUG) += zynqmp-debug.o
diff --git a/drivers/firmware/xilinx/zynqmp-ufs.c b/drivers/firmware/xilinx/zynqmp-ufs.c
new file mode 100644
index 000000000000..85da8a822f3a
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp-ufs.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Firmware Layer for UFS APIs
+ *
+ * Copyright (C) 2025 Advanced Micro Devices, Inc.
+ */
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/module.h>
+
+/* Register Node IDs */
+#define PM_REGNODE_PMC_IOU_SLCR		0x30000002 /* PMC IOU SLCR */
+#define PM_REGNODE_EFUSE_CACHE		0x30000003 /* EFUSE Cache */
+
+/* Register Offsets for PMC IOU SLCR */
+#define SRAM_CSR_OFFSET			0x104C /* SRAM Control and Status */
+#define TXRX_CFGRDY_OFFSET		0x1054 /* M-PHY TX-RX Config ready */
+
+/* Masks for SRAM Control and Status Register */
+#define SRAM_CSR_INIT_DONE_MASK		BIT(0) /* SRAM initialization done */
+#define SRAM_CSR_EXT_LD_DONE_MASK	BIT(1) /* SRAM External load done */
+#define SRAM_CSR_BYPASS_MASK		BIT(2) /* Bypass SRAM interface */
+
+/* Mask to check M-PHY TX-RX configuration readiness */
+#define TX_RX_CFG_RDY_MASK		GENMASK(3, 0)
+
+/* Register Offsets for EFUSE Cache */
+#define UFS_CAL_1_OFFSET		0xBE8 /* UFS Calibration Value */
+
+/**
+ * zynqmp_pm_is_mphy_tx_rx_config_ready - check M-PHY TX-RX config readiness
+ * @is_ready:	Store output status (true/false)
+ *
+ * Return:	Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_is_mphy_tx_rx_config_ready(bool *is_ready)
+{
+	u32 regval;
+	int ret;
+
+	if (!is_ready)
+		return -EINVAL;
+
+	ret = zynqmp_pm_sec_read_reg(PM_REGNODE_PMC_IOU_SLCR, TXRX_CFGRDY_OFFSET, &regval);
+	if (ret)
+		return ret;
+
+	regval &= TX_RX_CFG_RDY_MASK;
+	if (regval)
+		*is_ready = true;
+	else
+		*is_ready = false;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_is_mphy_tx_rx_config_ready);
+
+/**
+ * zynqmp_pm_is_sram_init_done - check SRAM initialization
+ * @is_done:	Store output status (true/false)
+ *
+ * Return:	Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_is_sram_init_done(bool *is_done)
+{
+	u32 regval;
+	int ret;
+
+	if (!is_done)
+		return -EINVAL;
+
+	ret = zynqmp_pm_sec_read_reg(PM_REGNODE_PMC_IOU_SLCR, SRAM_CSR_OFFSET, &regval);
+	if (ret)
+		return ret;
+
+	regval &= SRAM_CSR_INIT_DONE_MASK;
+	if (regval)
+		*is_done = true;
+	else
+		*is_done = false;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_is_sram_init_done);
+
+/**
+ * zynqmp_pm_set_sram_bypass - Set SRAM bypass Control
+ *
+ * Return:	Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_set_sram_bypass(void)
+{
+	u32 sram_csr;
+	int ret;
+
+	ret = zynqmp_pm_sec_read_reg(PM_REGNODE_PMC_IOU_SLCR, SRAM_CSR_OFFSET, &sram_csr);
+	if (ret)
+		return ret;
+
+	sram_csr &= ~SRAM_CSR_EXT_LD_DONE_MASK;
+	sram_csr |= SRAM_CSR_BYPASS_MASK;
+
+	return zynqmp_pm_sec_mask_write_reg(PM_REGNODE_PMC_IOU_SLCR, SRAM_CSR_OFFSET,
+					    GENMASK(2, 1), sram_csr);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_sram_bypass);
+
+/**
+ * zynqmp_pm_get_ufs_calibration_values - Read UFS calibration values
+ * @val:	Store the calibration value
+ *
+ * Return:	Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_get_ufs_calibration_values(u32 *val)
+{
+	return zynqmp_pm_sec_read_reg(PM_REGNODE_EFUSE_CACHE, UFS_CAL_1_OFFSET, val);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_ufs_calibration_values);
diff --git a/include/linux/firmware/xlnx-zynqmp-ufs.h b/include/linux/firmware/xlnx-zynqmp-ufs.h
new file mode 100644
index 000000000000..d3538dd5822a
--- /dev/null
+++ b/include/linux/firmware/xlnx-zynqmp-ufs.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Firmware layer for UFS APIs.
+ *
+ * Copyright (c) 2025 Advanced Micro Devices, Inc.
+ */
+
+#ifndef __FIRMWARE_XLNX_ZYNQMP_UFS_H__
+#define __FIRMWARE_XLNX_ZYNQMP_UFS_H__
+
+#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
+int zynqmp_pm_is_mphy_tx_rx_config_ready(bool *is_ready);
+int zynqmp_pm_is_sram_init_done(bool *is_done);
+int zynqmp_pm_set_sram_bypass(void);
+int zynqmp_pm_get_ufs_calibration_values(u32 *val);
+#else
+static inline int zynqmp_pm_is_mphy_tx_rx_config_ready(bool *is_ready)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_is_sram_init_done(bool *is_done)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_set_sram_bypass(void)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_get_ufs_calibration_values(u32 *val)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __FIRMWARE_XLNX_ZYNQMP_UFS_H__ */
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index b161f37de5cc..784d5920b4cd 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -16,6 +16,7 @@
 #include <linux/types.h>
 
 #include <linux/err.h>
+#include <linux/firmware/xlnx-zynqmp-ufs.h>
 
 #define ZYNQMP_PM_VERSION_MAJOR	1
 #define ZYNQMP_PM_VERSION_MINOR	0