diff options
| author | Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> | 2025-08-12 16:02:41 +0530 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2025-08-12 10:35:40 -0500 |
| commit | d56ddcee0101a4b948be0d388e91f5f38f14d448 (patch) | |
| tree | b1c4614a628fb37bd8f41d9ef52f6afc1536447d | |
| parent | 393d69df0fda903dc41e071fef76baf485510672 (diff) | |
arm64: dts: qcom: ipq5424: Describe the 4-wire UART SE
QUPv3 in IPQ5424 consists of six Serial Engines (SEs). Describe the
first SE, which supports a 4-wire UART configuration suitable for
applications such as HS-UART.
Note that the required initialization for this SE is not handled by the
bootloader. Therefore, add the SE node in the device tree but keep it
reserved. Enable it once Linux gains support for configuring the SE,
allowing to use in relevant RDPs.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250812-ipq5424_hsuart-v4-1-f1faa7704ea9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 18 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq5424.dtsi | 9 |
2 files changed, 27 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts index 117f1785e8b8..738618551203 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts @@ -224,6 +224,13 @@ }; }; + uart0_pins: uart0-default-state { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "uart0"; + drive-strength = <8>; + bias-pull-down; + }; + pcie2_default_state: pcie2-default-state { pins = "gpio31"; function = "gpio"; @@ -239,6 +246,17 @@ }; }; +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + /* + * The required initialization for this SE is not handled by the + * bootloader. Therefore, keep the device in "reserved" state until + * linux gains support for configuring the SE. + */ + status = "reserved"; +}; + &uart1 { pinctrl-0 = <&uart1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index 2eea8a078595..bd891e39f33e 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -442,6 +442,15 @@ #address-cells = <2>; #size-cells = <2>; + uart0: serial@1a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x01a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_UART0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart1: serial@1a84000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x01a84000 0 0x4000>; |