Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
 "Three new SoCs got added in existing arm64 chip families:

   - Renesas R-Car X5H (R8A78000) is a new generation of automotive
     SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
     currently highest-perforance embedded SoC.

   - TI AM62L is a new variant of the AM62 family of industrial SoCs,
     this one comes without a GPU.

   - Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
     based on Cortex-A53, and closely related to MSM8917 (Snapdragn
     425), which we already support.

  In addition, there are a good number of newly supported machines
  across SoC families:

   - Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers

   - Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
     Qualcomm MSM8937 and Qualcomm MSM8939,

   - Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
     other using x1p42100.

   - One Router based on Rockchips RK3568

   - 24 variants of the Enclustra Mercury system-on-module, all based on
     32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
     SocFPGA Agilex chips..

   - 30 industrial/embedded boards and single-board computers, using
     various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
     Spacemit, and Starfive.

  In total there are 783 commits here, the majority of these improving
  hardware support and cleaning up devicetree files across the tree,
  with the majority of the changes going into the Qualcomm, NXP, Renesas
  and Rockchips platforms"

* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
  arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
  ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
  ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
  ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
  ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
  arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
  arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
  arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
  arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
  arm64: dts: amlogic: s7d: add ao secure node
  arm64: dts: amlogic: s7: add ao secure node
  arm64: dts: amlogic: s6: add ao secure node
  arm64: dts: amlogic: Fix the register name of the 'DBI' region
  dts: arm64: amlogic: add a5 pinctrl node
  arm64: dts: amlogic: s7d: add power domain controller node
  arm64: dts: amlogic: s7: add power domain controller node
  arm64: dts: amlogic: s6: add power domain controller node
  dts: arm64: amlogic: Add ISP related nodes for C3
  arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
  dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
  ...

1 files changed, 492 insertions, 254 deletions

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 6e272d5345a8..38bd4fd8dda5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -15,6 +15,35 @@
 	compatible = "qcom,msm8960";
 	interrupt-parent = <&intc>;
 
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		qcom,no-pc-write;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -22,9 +51,9 @@
 
 		cpu@0 {
 			compatible = "qcom,krait";
+			reg = <0>;
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
-			reg = <0>;
 			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
@@ -32,9 +61,9 @@
 
 		cpu@1 {
 			compatible = "qcom,krait";
+			reg = <1>;
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
-			reg = <1>;
 			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
@@ -52,111 +81,29 @@
 		reg = <0x80000000 0>;
 	};
 
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <60000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-
-				cpu_crit0: trip1 {
-					temperature = <95000>;
-					hysteresis = <10000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <60000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-
-				cpu_crit1: trip1 {
-					temperature = <95000>;
-					hysteresis = <10000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		qcom,no-pc-write;
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "cxo_board";
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-			clock-output-names = "pxo_board";
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "sleep_clk";
-		};
-	};
-
-	/* Temporary fixed regulator */
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <2700000>;
-		regulator-max-microvolt = <2700000>;
-		regulator-always-on;
-	};
-
 	soc: soc {
+		compatible = "simple-bus";
+		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
 
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack",
+					  "err",
+					  "wakeup";
 		};
 
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>;
-			clocks = <&sleep_clk>;
-			clock-names = "sleep";
-			cpu-offset = <0x80000>;
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
 		};
 
 		qfprom: efuse@700000 {
@@ -174,26 +121,158 @@
 			};
 		};
 
-		msmgpio: pinctrl@800000 {
+		tlmm: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
+			reg = <0x800000 0x4000>;
 			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 152>;
+			gpio-ranges = <&tlmm 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
+
+			i2c1_default_state: i2c1-default-state {
+				i2c1-pins {
+					pins = "gpio8", "gpio9";
+					function = "gsbi1";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c1_sleep_state: i2c1-sleep-state {
+				i2c1-pins {
+					pins = "gpio8", "gpio9";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c3_default_state: i2c3-default-state {
+				i2c3-pins {
+					pins = "gpio16", "gpio17";
+					function = "gsbi3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c3_sleep_state: i2c3-sleep-state {
+				i2c3-pins {
+					pins = "gpio16", "gpio17";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c8_default_state: i2c8-default-state {
+				i2c8-pins {
+					pins = "gpio36", "gpio37";
+					function = "gsbi8";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c8_sleep_state: i2c8-sleep-state {
+				i2c8-pins {
+					pins = "gpio36", "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c10_default_state: i2c10-default-state {
+				i2c10-pins {
+					pins = "gpio73", "gpio74";
+					function = "gsbi10";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c10_sleep_state: i2c10-sleep-state {
+				i2c10-pins {
+					pins = "gpio73", "gpio74";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c12_default_state: i2c12-default-state {
+				i2c12-pins {
+					pins = "gpio44", "gpio45";
+					function = "gsbi12";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c12_sleep_state: i2c12-sleep-state {
+				i2c12-pins {
+					pins = "gpio44", "gpio45";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			sdcc3_default_state: sdcc3-default-state {
+				clk-pins {
+					pins = "sdc3_clk";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc3_cmd";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc3_data";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_sleep_state: sdcc3-sleep-state {
+				clk-pins {
+					pins = "sdc3_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc3_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc3_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960", "syscon";
+			reg = <0x900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
 			clocks = <&cxo_board>,
 				 <&pxo_board>,
 				 <&lcc PLL4>;
-			clock-names = "cxo", "pxo", "pll4";
+			clock-names = "cxo",
+				      "pxo",
+				      "pll4";
 
 			tsens: thermal-sensor {
 				compatible = "qcom,msm8960-tsens";
@@ -208,49 +287,25 @@
 			};
 		};
 
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-msm8960";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL4_VOTE>,
-				 <0>,
-				 <0>, <0>,
-				 <0>, <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll4_vote",
-				      "mi2s_codec_clk",
-				      "codec_i2s_mic_codec_clk",
-				      "spare_i2s_mic_codec_clk",
-				      "codec_i2s_spkr_codec_clk",
-				      "spare_i2s_spkr_codec_clk",
-				      "pcm_codec_clk";
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL3>,
-				 <&gcc PLL8_VOTE>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll3",
-				      "pll8_vote",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "dsi2pll",
-				      "dsi2pllbyte",
-				      "hdmipll";
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			reg = <0x0200a000 0x100>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
 		};
 
 		l2cc: clock-controller@2011000 {
@@ -261,17 +316,6 @@
 			#clock-cells = <0>;
 		};
 
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-msm8960";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-		};
-
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -281,15 +325,6 @@
 			#clock-cells = <0>;
 		};
 
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
 		saw0: power-manager@2089000 {
 			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -300,6 +335,15 @@
 			};
 		};
 
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
 		saw1: power-manager@2099000 {
 			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
@@ -310,77 +354,34 @@
 			};
 		};
 
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi8: gsbi@1a000000  {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <8>;
-			reg = <0x1a000000 0x100>;
-			clocks = <&gcc GSBI8_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			status = "disabled";
-
-			gsbi8_serial: serial@1a040000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a040000 0x1000>,
-				      <0x1a000000 0x1000>;
-				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI8_UART_CLK>,
-					 <&gcc GSBI8_H_CLK>;
-				clock-names = "core",
-					      "iface";
-
-				status = "disabled";
-			};
-		};
-
-		ssbi: ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		sdcc3: mmc@12180000 {
 			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
 			reg = <0x12180000 0x2000>;
+			arm,primecell-periphid = <0x00051180>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -392,6 +393,8 @@
 			vmmc-supply = <&vsdcc_fixed>;
 			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 			dma-names = "tx", "rx";
+
+			status = "disabled";
 		};
 
 		sdcc3bam: dma-controller@12182000 {
@@ -405,10 +408,9 @@
 		};
 
 		sdcc1: mmc@12400000 {
-			status = "disabled";
 			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00051180>;
 			reg = <0x12400000 0x2000>;
+			arm,primecell-periphid = <0x00051180>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -420,6 +422,8 @@
 			vmmc-supply = <&vsdcc_fixed>;
 			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 			dma-names = "tx", "rx";
+
+			status = "disabled";
 		};
 
 		sdcc1bam: dma-controller@12402000 {
@@ -432,33 +436,32 @@
 			qcom,ee = <0>;
 		};
 
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8960", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gsbi1: gsbi@16000000 {
+		gsbi12: gsbi@12480000 {
 			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x16000000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
+			reg = <0x12480000 0x100>;
+			ranges;
+			cell-index = <12>;
+			clocks = <&gcc GSBI12_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
 
 			status = "disabled";
 
-			gsbi1_spi: spi@16080000 {
-				compatible = "qcom,spi-qup-v1.1.1";
+			gsbi12_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c12_default_state>;
+				pinctrl-1 = <&i2c12_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_QUP_CLK>,
+					 <&gcc GSBI12_H_CLK>;
+				clock-names = "core",
+					      "iface";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <0x16080000 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				cs-gpios = <&msmgpio 8 0>;
 
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
 				status = "disabled";
 			};
 		};
@@ -479,6 +482,7 @@
 			phys = <&usb_hs1_phy>;
 			phy-names = "usb-phy";
 			#reset-cells = <1>;
+
 			status = "disabled";
 
 			ulpi {
@@ -494,6 +498,51 @@
 			};
 		};
 
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16000000 0x100>;
+			ranges;
+			cell-index = <1>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			gsbi1_i2c: i2c@16080000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				pinctrl-0 = <&i2c1_default_state>;
+				pinctrl-1 = <&i2c1_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>,
+					 <&gcc GSBI1_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 8 0>;
+				clocks = <&gcc GSBI1_QUP_CLK>,
+					 <&gcc GSBI1_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
 		gsbi3: gsbi@16200000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			reg = <0x16200000 0x100>;
@@ -503,6 +552,7 @@
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
+
 			status = "disabled";
 
 			gsbi3_i2c: i2c@16280000 {
@@ -514,12 +564,200 @@
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
+				clock-names = "core",
+					      "iface";
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				status = "disabled";
 			};
 		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16400000 0x100>;
+			ranges;
+			cell-index = <5>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>,
+					 <&gcc GSBI5_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@1a000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x1a000000 0x100>;
+			ranges;
+			cell-index = <8>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi8_serial: serial@1a040000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a040000 0x1000>,
+				      <0x1a000000 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_UART_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+
+			gsbi8_i2c: i2c@1a080000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a080000 0x1000>;
+				pinctrl-0 = <&i2c8_default_state>;
+				pinctrl-1 = <&i2c8_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_QUP_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi10: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x1a200000 0x100>;
+			ranges;
+			cell-index = <10>;
+			clocks = <&gcc GSBI10_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			gsbi10_i2c: i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				pinctrl-0 = <&i2c10_default_state>;
+				pinctrl-1 = <&i2c10_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI10_QUP_CLK>,
+					 <&gcc GSBI10_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
 	};
 };
-#include "qcom-msm8960-pins.dtsi"