diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2025-10-27 08:02:50 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2025-10-27 08:02:50 +0100 |
| commit | 37022410f4a3cc11614626a58cd08bcf8ea529e9 (patch) | |
| tree | 60e0a996385b1d5865dc5264ff130cf9e852abb4 /drivers/dpll/zl3073x/core.c | |
| parent | aad1577ab950d1ad46e0dd0915bfbaf9fa9160e4 (diff) | |
| parent | dcb6fa37fd7bc9c3d2b066329b0d27dedf8becaa (diff) | |
Merge 6.18-rc3 into driver-core-next
We need the driver core fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/dpll/zl3073x/core.c')
| -rw-r--r-- | drivers/dpll/zl3073x/core.c | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/dpll/zl3073x/core.c b/drivers/dpll/zl3073x/core.c index 092e7027948a..e42e527813cf 100644 --- a/drivers/dpll/zl3073x/core.c +++ b/drivers/dpll/zl3073x/core.c @@ -1038,8 +1038,29 @@ zl3073x_dev_phase_meas_setup(struct zl3073x_dev *zldev) int zl3073x_dev_start(struct zl3073x_dev *zldev, bool full) { struct zl3073x_dpll *zldpll; + u8 info; int rc; + rc = zl3073x_read_u8(zldev, ZL_REG_INFO, &info); + if (rc) { + dev_err(zldev->dev, "Failed to read device status info\n"); + return rc; + } + + if (!FIELD_GET(ZL_INFO_READY, info)) { + /* The ready bit indicates that the firmware was successfully + * configured and is ready for normal operation. If it is + * cleared then the configuration stored in flash is wrong + * or missing. In this situation the driver will expose + * only devlink interface to give an opportunity to flash + * the correct config. + */ + dev_info(zldev->dev, + "FW not fully ready - missing or corrupted config\n"); + + return 0; + } + if (full) { /* Fetch device state */ rc = zl3073x_dev_state_fetch(zldev); |