Merge tag 'mediatek-drm-fixes-20250104' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes - 20250104

1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org

1 files changed, 27 insertions, 19 deletions

diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index 36713c176cfc..3b0993abfdc3 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -543,18 +543,16 @@ static int mtk_dp_set_color_format(struct mtk_dp *mtk_dp,
 				   enum dp_pixelformat color_format)
 {
 	u32 val;
-
-	/* update MISC0 */
-	mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3034,
-			   color_format << DP_TEST_COLOR_FORMAT_SHIFT,
-			   DP_TEST_COLOR_FORMAT_MASK);
+	u32 misc0_color;
 
 	switch (color_format) {
 	case DP_PIXELFORMAT_YUV422:
 		val = PIXEL_ENCODE_FORMAT_DP_ENC0_P0_YCBCR422;
+		misc0_color = DP_COLOR_FORMAT_YCbCr422;
 		break;
 	case DP_PIXELFORMAT_RGB:
 		val = PIXEL_ENCODE_FORMAT_DP_ENC0_P0_RGB;
+		misc0_color = DP_COLOR_FORMAT_RGB;
 		break;
 	default:
 		drm_warn(mtk_dp->drm_dev, "Unsupported color format: %d\n",
@@ -562,6 +560,11 @@ static int mtk_dp_set_color_format(struct mtk_dp *mtk_dp,
 		return -EINVAL;
 	}
 
+	/* update MISC0 */
+	mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_3034,
+			   misc0_color,
+			   DP_TEST_COLOR_FORMAT_MASK);
+
 	mtk_dp_update_bits(mtk_dp, MTK_DP_ENC0_P0_303C,
 			   val, PIXEL_ENCODE_FORMAT_DP_ENC0_P0_MASK);
 	return 0;
@@ -2100,7 +2103,6 @@ static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge)
 	struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
 	enum drm_connector_status ret = connector_status_disconnected;
 	bool enabled = mtk_dp->enabled;
-	u8 sink_count = 0;
 
 	if (!mtk_dp->train_info.cable_plugged_in)
 		return ret;
@@ -2115,8 +2117,8 @@ static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge)
 	 * function, we just need to check the HPD connection to check
 	 * whether we connect to a sink device.
 	 */
-	drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, &sink_count);
-	if (DP_GET_SINK_COUNT(sink_count))
+
+	if (drm_dp_read_sink_count(&mtk_dp->aux) > 0)
 		ret = connector_status_connected;
 
 	if (!enabled)
@@ -2408,12 +2410,19 @@ mtk_dp_bridge_mode_valid(struct drm_bridge *bridge,
 {
 	struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
 	u32 bpp = info->color_formats & DRM_COLOR_FORMAT_YCBCR422 ? 16 : 24;
-	u32 rate = min_t(u32, drm_dp_max_link_rate(mtk_dp->rx_cap) *
-			      drm_dp_max_lane_count(mtk_dp->rx_cap),
-			 drm_dp_bw_code_to_link_rate(mtk_dp->max_linkrate) *
-			 mtk_dp->max_lanes);
+	u32 lane_count_min = mtk_dp->train_info.lane_count;
+	u32 rate = drm_dp_bw_code_to_link_rate(mtk_dp->train_info.link_rate) *
+		   lane_count_min;
 
-	if (rate < mode->clock * bpp / 8)
+	/*
+	 *FEC overhead is approximately 2.4% from DP 1.4a spec 2.2.1.4.2.
+	 *The down-spread amplitude shall either be disabled (0.0%) or up
+	 *to 0.5% from 1.4a 3.5.2.6. Add up to approximately 3% total overhead.
+	 *
+	 *Because rate is already divided by 10,
+	 *mode->clock does not need to be multiplied by 10
+	 */
+	if ((rate * 97 / 100) < (mode->clock * bpp / 8))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
@@ -2454,10 +2463,9 @@ static u32 *mtk_dp_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
 	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	struct drm_display_info *display_info =
 		&conn_state->connector->display_info;
-	u32 rate = min_t(u32, drm_dp_max_link_rate(mtk_dp->rx_cap) *
-			      drm_dp_max_lane_count(mtk_dp->rx_cap),
-			 drm_dp_bw_code_to_link_rate(mtk_dp->max_linkrate) *
-			 mtk_dp->max_lanes);
+	u32 lane_count_min = mtk_dp->train_info.lane_count;
+	u32 rate = drm_dp_bw_code_to_link_rate(mtk_dp->train_info.link_rate) *
+		   lane_count_min;
 
 	*num_input_fmts = 0;
 
@@ -2466,8 +2474,8 @@ static u32 *mtk_dp_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
 	 * datarate of YUV422 and sink device supports YUV422, we output YUV422
 	 * format. Use this condition, we can support more resolution.
 	 */
-	if ((rate < (mode->clock * 24 / 8)) &&
-	    (rate > (mode->clock * 16 / 8)) &&
+	if (((rate * 97 / 100) < (mode->clock * 24 / 8)) &&
+	    ((rate * 97 / 100) > (mode->clock * 16 / 8)) &&
 	    (display_info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
 		input_fmts = kcalloc(1, sizeof(*input_fmts), GFP_KERNEL);
 		if (!input_fmts)