Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.17-rc4).

No conflicts.

Adjacent changes:

drivers/net/ethernet/intel/idpf/idpf_txrx.c
  02614eee26fb ("idpf: do not linearize big TSO packets")
  6c4e68480238 ("idpf: remove obsolete stashing code")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 32 insertions, 12 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c
index e2a036ce76ca..3b2d9c436979 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.c
@@ -2377,7 +2377,13 @@ ice_get_set_tx_topo(struct ice_hw *hw, u8 *buf, u16 buf_size,
  * The function will apply the new Tx topology from the package buffer
  * if available.
  *
- * Return: zero when update was successful, negative values otherwise.
+ * Return:
+ * * 0 - Successfully applied topology configuration.
+ * * -EBUSY - Failed to acquire global configuration lock.
+ * * -EEXIST - Topology configuration has already been applied.
+ * * -EIO - Unable to apply topology configuration.
+ * * -ENODEV - Failed to re-initialize device after applying configuration.
+ * * Other negative error codes indicate unexpected failures.
  */
 int ice_cfg_tx_topo(struct ice_hw *hw, const void *buf, u32 len)
 {
@@ -2410,7 +2416,7 @@ int ice_cfg_tx_topo(struct ice_hw *hw, const void *buf, u32 len)
 
 	if (status) {
 		ice_debug(hw, ICE_DBG_INIT, "Get current topology is failed\n");
-		return status;
+		return -EIO;
 	}
 
 	/* Is default topology already applied ? */
@@ -2497,31 +2503,45 @@ update_topo:
 				 ICE_GLOBAL_CFG_LOCK_TIMEOUT);
 	if (status) {
 		ice_debug(hw, ICE_DBG_INIT, "Failed to acquire global lock\n");
-		return status;
+		return -EBUSY;
 	}
 
 	/* Check if reset was triggered already. */
 	reg = rd32(hw, GLGEN_RSTAT);
 	if (reg & GLGEN_RSTAT_DEVSTATE_M) {
-		/* Reset is in progress, re-init the HW again */
 		ice_debug(hw, ICE_DBG_INIT, "Reset is in progress. Layer topology might be applied already\n");
 		ice_check_reset(hw);
-		return 0;
+		/* Reset is in progress, re-init the HW again */
+		goto reinit_hw;
 	}
 
 	/* Set new topology */
 	status = ice_get_set_tx_topo(hw, new_topo, size, NULL, NULL, true);
 	if (status) {
-		ice_debug(hw, ICE_DBG_INIT, "Failed setting Tx topology\n");
-		return status;
+		ice_debug(hw, ICE_DBG_INIT, "Failed to set Tx topology, status %pe\n",
+			  ERR_PTR(status));
+		/* only report -EIO here as the caller checks the error value
+		 * and reports an informational error message informing that
+		 * the driver failed to program Tx topology.
+		 */
+		status = -EIO;
 	}
 
-	/* New topology is updated, delay 1 second before issuing the CORER */
+	/* Even if Tx topology config failed, we need to CORE reset here to
+	 * clear the global configuration lock. Delay 1 second to allow
+	 * hardware to settle then issue a CORER
+	 */
 	msleep(1000);
 	ice_reset(hw, ICE_RESET_CORER);
-	/* CORER will clear the global lock, so no explicit call
-	 * required for release.
-	 */
+	ice_check_reset(hw);
+
+reinit_hw:
+	/* Since we triggered a CORER, re-initialize hardware */
+	ice_deinit_hw(hw);
+	if (ice_init_hw(hw)) {
+		ice_debug(hw, ICE_DBG_INIT, "Failed to re-init hardware after setting Tx topology\n");
+		return -ENODEV;
+	}
 
-	return 0;
+	return status;
 }