Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
  was another normal development cycle, with lots of the usual drivers
  getting updates:

   - Thunderbolt driver cleanups and additions

   - dwc3 driver updates

   - dwc2 driver updates

   - typec driver updates

   - xhci driver updates and additions

   - offload USB engine updates for better power management

   - unused tracepoint removals

   - usb gadget fixes and updates as more users start to rely on these
     drivers instead of the "old" function gadget drivers

   - new USB device ids

   - other minor driver USB driver updates

   - new USB I/O driver framework and driver additions"

  The last item, the usb i/o driver, has an i2c and gpio driver added
  through this tree. Those drivers were acked by the respective
  subsystem maintainers.

  All of these have been in linux-next for a while"

* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
  usb: vhci-hcd: Prevent suspending virtually attached devices
  USB: serial: option: add SIMCom 8230C compositions
  thunderbolt: Fix use-after-free in tb_dp_dprx_work
  usb: xhci: align PORTSC trace with one-based port numbering
  usb: xhci: correct indentation for PORTSC tracing function
  usb: xhci: improve TR Dequeue Pointer mask
  usb: xhci-pci: add support for hosts with zero USB3 ports
  usb: xhci: Update a comment about Stop Endpoint retries
  Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
  usb: gadget: f_rndis: Refactor bind path to use __free()
  usb: gadget: f_ecm: Refactor bind path to use __free()
  usb: gadget: f_acm: Refactor bind path to use __free()
  usb: gadget: f_ncm: Refactor bind path to use __free()
  usb: gadget: Introduce free_usb_request helper
  usb: gadget: Store endpoint pointer in usb_request
  usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
  usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
  usb: host: xhci-rcar: Move R-Car reg definitions
  dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
  usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
  ...

1 files changed, 20 insertions, 28 deletions

diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
index 027226325039..675d2bc538a4 100644
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -8,6 +8,7 @@
 
 /* #define VERBOSE_DEBUG */
 
+#include <linux/cleanup.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -15,6 +16,8 @@
 #include <linux/etherdevice.h>
 #include <linux/string_choices.h>
 
+#include <linux/usb/gadget.h>
+
 #include "u_ether.h"
 #include "u_ether_configfs.h"
 #include "u_ecm.h"
@@ -678,6 +681,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	struct usb_ep		*ep;
 
 	struct f_ecm_opts	*ecm_opts;
+	struct usb_request	*request __free(free_usb_request) = NULL;
 
 	if (!can_support_ecm(cdev->gadget))
 		return -EINVAL;
@@ -711,7 +715,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	/* allocate instance-specific interface IDs */
 	status = usb_interface_id(c, f);
 	if (status < 0)
-		goto fail;
+		return status;
 	ecm->ctrl_id = status;
 	ecm_iad_descriptor.bFirstInterface = status;
 
@@ -720,24 +724,22 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 
 	status = usb_interface_id(c, f);
 	if (status < 0)
-		goto fail;
+		return status;
 	ecm->data_id = status;
 
 	ecm_data_nop_intf.bInterfaceNumber = status;
 	ecm_data_intf.bInterfaceNumber = status;
 	ecm_union_desc.bSlaveInterface0 = status;
 
-	status = -ENODEV;
-
 	/* allocate instance-specific endpoints */
 	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_in_desc);
 	if (!ep)
-		goto fail;
+		return -ENODEV;
 	ecm->port.in_ep = ep;
 
 	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_out_desc);
 	if (!ep)
-		goto fail;
+		return -ENODEV;
 	ecm->port.out_ep = ep;
 
 	/* NOTE:  a status/notification endpoint is *OPTIONAL* but we
@@ -746,20 +748,18 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	 */
 	ep = usb_ep_autoconfig(cdev->gadget, &fs_ecm_notify_desc);
 	if (!ep)
-		goto fail;
+		return -ENODEV;
 	ecm->notify = ep;
 
-	status = -ENOMEM;
-
 	/* allocate notification request and buffer */
-	ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
-	if (!ecm->notify_req)
-		goto fail;
-	ecm->notify_req->buf = kmalloc(ECM_STATUS_BYTECOUNT, GFP_KERNEL);
-	if (!ecm->notify_req->buf)
-		goto fail;
-	ecm->notify_req->context = ecm;
-	ecm->notify_req->complete = ecm_notify_complete;
+	request = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!request)
+		return -ENOMEM;
+	request->buf = kmalloc(ECM_STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!request->buf)
+		return -ENOMEM;
+	request->context = ecm;
+	request->complete = ecm_notify_complete;
 
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
@@ -778,7 +778,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
 			ecm_ss_function, ecm_ss_function);
 	if (status)
-		goto fail;
+		return status;
 
 	/* NOTE:  all that is done without knowing or caring about
 	 * the network link ... which is unavailable to this code
@@ -788,20 +788,12 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	ecm->port.open = ecm_open;
 	ecm->port.close = ecm_close;
 
+	ecm->notify_req = no_free_ptr(request);
+
 	DBG(cdev, "CDC Ethernet: IN/%s OUT/%s NOTIFY/%s\n",
 			ecm->port.in_ep->name, ecm->port.out_ep->name,
 			ecm->notify->name);
 	return 0;
-
-fail:
-	if (ecm->notify_req) {
-		kfree(ecm->notify_req->buf);
-		usb_ep_free_request(ecm->notify, ecm->notify_req);
-	}
-
-	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
-
-	return status;
 }
 
 static inline struct f_ecm_opts *to_f_ecm_opts(struct config_item *item)