net: mana: Add support for net_shaper_ops

Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.

To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().

The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.

To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.

On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.

Set the speed:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do set --json '{"ifindex":'$IFINDEX',
		   "handle":{"scope": "netdev", "id":'$ID' },
		   "bw-max": 200000000 }'

Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do get --json '{"ifindex":'$IFINDEX',
		      "handle":{"scope": "netdev", "id":'$ID' }}'

> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}

Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/net_shaper.yaml \
 --do delete --json '{"ifindex":'$IFINDEX',
		      "handle":{"scope": "netdev","id":'$ID' }}'

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

1 files changed, 40 insertions, 0 deletions

diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index 4176edf1be71..038b18340e51 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -5,6 +5,7 @@
 #define _MANA_H
 
 #include <net/xdp.h>
+#include <net/net_shaper.h>
 
 #include "gdma.h"
 #include "hw_channel.h"
@@ -526,7 +527,12 @@ struct mana_port_context {
 	struct mutex vport_mutex;
 	int vport_use_count;
 
+	/* Net shaper handle*/
+	struct net_shaper_handle handle;
+
 	u16 port_idx;
+	/* Currently configured speed (mbps) */
+	u32 speed;
 
 	bool port_is_up;
 	bool port_st_save; /* Saved port state */
@@ -562,6 +568,9 @@ struct bpf_prog *mana_xdp_get(struct mana_port_context *apc);
 void mana_chn_setxdp(struct mana_port_context *apc, struct bpf_prog *prog);
 int mana_bpf(struct net_device *ndev, struct netdev_bpf *bpf);
 void mana_query_gf_stats(struct mana_port_context *apc);
+int mana_query_link_cfg(struct mana_port_context *apc);
+int mana_set_bw_clamp(struct mana_port_context *apc, u32 speed,
+		      int enable_clamping);
 void mana_query_phy_stats(struct mana_port_context *apc);
 int mana_pre_alloc_rxbufs(struct mana_port_context *apc, int mtu, int num_queues);
 void mana_pre_dealloc_rxbufs(struct mana_port_context *apc);
@@ -589,6 +598,8 @@ enum mana_command_code {
 	MANA_FENCE_RQ		= 0x20006,
 	MANA_CONFIG_VPORT_RX	= 0x20007,
 	MANA_QUERY_VPORT_CONFIG	= 0x20008,
+	MANA_QUERY_LINK_CONFIG	= 0x2000A,
+	MANA_SET_BW_CLAMP	= 0x2000B,
 	MANA_QUERY_PHY_STAT     = 0x2000c,
 
 	/* Privileged commands for the PF mode */
@@ -598,6 +609,35 @@ enum mana_command_code {
 	MANA_DEREGISTER_HW_PORT	= 0x28004,
 };
 
+/* Query Link Configuration*/
+struct mana_query_link_config_req {
+	struct gdma_req_hdr hdr;
+	mana_handle_t vport;
+}; /* HW DATA */
+
+struct mana_query_link_config_resp {
+	struct gdma_resp_hdr hdr;
+	u32 qos_speed_mbps;
+	u8 qos_unconfigured;
+	u8 reserved1[3];
+	u32 link_speed_mbps;
+	u8 reserved2[4];
+}; /* HW DATA */
+
+/* Set Bandwidth Clamp*/
+struct mana_set_bw_clamp_req {
+	struct gdma_req_hdr hdr;
+	mana_handle_t vport;
+	enum TRI_STATE enable_clamping;
+	u32 link_speed_mbps;
+}; /* HW DATA */
+
+struct mana_set_bw_clamp_resp {
+	struct gdma_resp_hdr hdr;
+	u8 qos_unconfigured;
+	u8 reserved[7];
+}; /* HW DATA */
+
 /* Query Device Configuration */
 struct mana_query_device_cfg_req {
 	struct gdma_req_hdr hdr;