diff options
| author | Shenghao Ding <shenghao-ding@ti.com> | 2025-03-13 17:32:38 +0800 |
|---|---|---|
| committer | Takashi Iwai <tiwai@suse.de> | 2025-03-19 08:59:48 +0100 |
| commit | 84d6a465f211d6e61ab09a6642febf1a7013b6bf (patch) | |
| tree | 44c12efd85be6dd9295ddf4af6f1b97286687e69 /include/sound/tas2781-dsp.h | |
| parent | 1a7c3068143be177deea86d977d3042a0c256706 (diff) | |
ASoC: tas2781: Support dsp firmware Alpha and Beta seaies
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
Diffstat (limited to 'include/sound/tas2781-dsp.h')
| -rw-r--r-- | include/sound/tas2781-dsp.h | 30 |
1 files changed, 27 insertions, 3 deletions
diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 3cda9da14f6d..c3a9efa73d5d 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -30,8 +30,10 @@ #define PRE_DEVICE_C 0x12 #define PRE_DEVICE_D 0x16 -#define PPC3_VERSION 0x4100 -#define PPC3_VERSION_TAS2781 0x14600 +#define PPC3_VERSION_BASE 0x4100 +#define PPC3_VERSION_TAS2781_BASIC_MIN 0x14600 +#define PPC3_VERSION_TAS2781_ALPHA_MIN 0x4a00 +#define PPC3_VERSION_TAS2781_BETA_MIN 0x19400 #define TASDEVICE_DEVICE_SUM 8 #define TASDEVICE_CONFIG_SUM 64 @@ -106,6 +108,27 @@ struct tasdevice_calibration { struct tasdevice_data dev_data; }; +struct fct_param_address { + /* Thermal data for PG 1.0 device */ + unsigned char thr[3]; + /* Thermal data for PG 2.0 device */ + unsigned char thr2[3]; + /* Pilot tone enable flag, usually the sine wave */ + unsigned char plt_flg[3]; + /* Pilot tone gain for calibration */ + unsigned char sin_gn[3]; + /* Pilot tone gain for calibration */ + unsigned char sin_gn2[3]; + /* high 32-bit of real-time spk impedance */ + unsigned char r0_reg[3]; + /* check spk connection */ + unsigned char tf_reg[3]; + /* check spk resonant frequency */ + unsigned char a1_reg[3]; + /* check spk resonant frequency */ + unsigned char a2_reg[3]; +}; + struct tasdevice_fw { struct tasdevice_dspfw_hdr fw_hdr; unsigned short nr_programs; @@ -114,6 +137,7 @@ struct tasdevice_fw { struct tasdevice_config *configs; unsigned short nr_calibrations; struct tasdevice_calibration *calibrations; + struct fct_param_address fct_par_addr; struct device *dev; }; |