Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.18-rc5).

Conflicts:

drivers/net/wireless/ath/ath12k/mac.c
  9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
  6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net

Adjacent changes:

drivers/net/ethernet/intel/Kconfig
  b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
  93f53db9f9dc ("ice: switch to Page Pool")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

14 files changed, 124 insertions, 20 deletions

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 8a9a2e732a65..e04d56a5332e 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -832,7 +832,7 @@ defined(CONFIG_AUTOFDO_CLANG) || defined(CONFIG_PROPELLER_CLANG)
 
 /* Required sections not related to debugging. */
 #define ELF_DETAILS							\
-		.modinfo : { *(.modinfo) }				\
+		.modinfo : { *(.modinfo) . = ALIGN(8); }		\
 		.comment 0 : { *(.comment) }				\
 		.symtab 0 : { *(.symtab) }				\
 		.strtab 0 : { *(.strtab) }				\
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 8e8d1cc8b06c..44c30183ecc3 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -341,15 +341,15 @@ enum req_op {
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= (__force blk_opf_t)9,
 	/* Open a zone */
-	REQ_OP_ZONE_OPEN	= (__force blk_opf_t)10,
+	REQ_OP_ZONE_OPEN	= (__force blk_opf_t)11,
 	/* Close a zone */
-	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
+	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)13,
 	/* Transition a zone to full */
-	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)13,
+	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)15,
 	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
+	REQ_OP_ZONE_RESET	= (__force blk_opf_t)17,
 	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
+	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)19,
 
 	/* Driver private requests */
 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
@@ -478,6 +478,7 @@ static inline bool op_is_zone_mgmt(enum req_op op)
 {
 	switch (op & REQ_OP_MASK) {
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_FINISH:
diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h
index 81f0e698acbf..f206370060e1 100644
--- a/include/linux/fbcon.h
+++ b/include/linux/fbcon.h
@@ -18,6 +18,7 @@ void fbcon_suspended(struct fb_info *info);
 void fbcon_resumed(struct fb_info *info);
 int fbcon_mode_deleted(struct fb_info *info,
 		       struct fb_videomode *mode);
+void fbcon_delete_modelist(struct list_head *head);
 void fbcon_new_modelist(struct fb_info *info);
 void fbcon_get_requirement(struct fb_info *info,
 			   struct fb_blit_caps *caps);
@@ -38,6 +39,7 @@ static inline void fbcon_suspended(struct fb_info *info) {}
 static inline void fbcon_resumed(struct fb_info *info) {}
 static inline int fbcon_mode_deleted(struct fb_info *info,
 				     struct fb_videomode *mode) { return 0; }
+static inline void fbcon_delete_modelist(struct list_head *head) {}
 static inline void fbcon_new_modelist(struct fb_info *info) {}
 static inline void fbcon_get_requirement(struct fb_info *info,
 					 struct fb_blit_caps *caps) {}
diff --git a/include/linux/net/intel/libie/fwlog.h b/include/linux/net/intel/libie/fwlog.h
index 36b13fabca9e..7273c78c826b 100644
--- a/include/linux/net/intel/libie/fwlog.h
+++ b/include/linux/net/intel/libie/fwlog.h
@@ -78,8 +78,20 @@ struct libie_fwlog {
 	);
 };
 
+#if IS_ENABLED(CONFIG_LIBIE_FWLOG)
 int libie_fwlog_init(struct libie_fwlog *fwlog, struct libie_fwlog_api *api);
 void libie_fwlog_deinit(struct libie_fwlog *fwlog);
 void libie_fwlog_reregister(struct libie_fwlog *fwlog);
 void libie_get_fwlog_data(struct libie_fwlog *fwlog, u8 *buf, u16 len);
+#else
+static inline int libie_fwlog_init(struct libie_fwlog *fwlog,
+				   struct libie_fwlog_api *api)
+{
+	return -EOPNOTSUPP;
+}
+static inline void libie_fwlog_deinit(struct libie_fwlog *fwlog) { }
+static inline void libie_fwlog_reregister(struct libie_fwlog *fwlog) { }
+static inline void libie_get_fwlog_data(struct libie_fwlog *fwlog, u8 *buf,
+					u16 len) { }
+#endif /* CONFIG_LIBIE_FWLOG */
 #endif /* _LIBIE_FWLOG_H_ */
diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h
index 1571e9157fa5..b1b837583d54 100644
--- a/include/linux/platform_data/x86/int3472.h
+++ b/include/linux/platform_data/x86/int3472.h
@@ -100,7 +100,6 @@ struct int3472_gpio_regulator {
 	struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
 	char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH];
 	char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
-	struct gpio_desc *ena_gpio;
 	struct regulator_dev *rdev;
 	struct regulator_desc rdesc;
 };
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4e1ac1fbcec4..55343795644b 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1643,7 +1643,7 @@ struct regmap_irq_chip_data;
  * @status_invert: Inverted status register: cleared bits are active interrupts.
  * @status_is_level: Status register is actuall signal level: Xor status
  *		     register with previous value to get active interrupts.
- * @wake_invert: Inverted wake register: cleared bits are wake enabled.
+ * @wake_invert: Inverted wake register: cleared bits are wake disabled.
  * @type_in_mask: Use the mask registers for controlling irq type. Use this if
  *		  the hardware provides separate bits for rising/falling edge
  *		  or low/high level interrupts and they should be combined into
diff --git a/include/linux/sched.h b/include/linux/sched.h
index cbb7340c5866..b469878de25c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2407,12 +2407,12 @@ static inline void __migrate_enable(void) { }
  * be defined in kernel/sched/core.c.
  */
 #ifndef INSTANTIATE_EXPORTED_MIGRATE_DISABLE
-static inline void migrate_disable(void)
+static __always_inline void migrate_disable(void)
 {
 	__migrate_disable();
 }
 
-static inline void migrate_enable(void)
+static __always_inline void migrate_enable(void)
 {
 	__migrate_enable();
 }
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 4d1780848d0e..b673c31569f3 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -401,7 +401,8 @@ virtio_net_hdr_tnl_from_skb(const struct sk_buff *skb,
 	if (!tnl_hdr_negotiated)
 		return -EINVAL;
 
-        vhdr->hash_hdr.hash_value = 0;
+	vhdr->hash_hdr.hash_value_lo = 0;
+	vhdr->hash_hdr.hash_value_hi = 0;
         vhdr->hash_hdr.hash_report = 0;
         vhdr->hash_hdr.padding = 0;
 
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index bca0333f1e99..f5be96f08b9d 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -780,7 +780,7 @@ struct mgmt_adv_pattern {
 	__u8 ad_type;
 	__u8 offset;
 	__u8 length;
-	__u8 value[31];
+	__u8 value[HCI_MAX_AD_LENGTH];
 } __packed;
 
 #define MGMT_OP_ADD_ADV_PATTERNS_MONITOR	0x0052
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 53490eb04e87..f2e8963cfaac 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6440,6 +6440,11 @@ static inline void wiphy_delayed_work_init(struct wiphy_delayed_work *dwork,
  * after wiphy_lock() was called. Therefore, wiphy_cancel_work() can
  * use just cancel_work() instead of cancel_work_sync(), it requires
  * being in a section protected by wiphy_lock().
+ *
+ * Note that these are scheduled with a timer where the accuracy
+ * becomes less the longer in the future the scheduled timer is. Use
+ * wiphy_hrtimer_work_queue() if the timer must be not be late by more
+ * than approximately 10 percent.
  */
 void wiphy_delayed_work_queue(struct wiphy *wiphy,
 			      struct wiphy_delayed_work *dwork,
@@ -6511,6 +6516,79 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
 bool wiphy_delayed_work_pending(struct wiphy *wiphy,
 				struct wiphy_delayed_work *dwork);
 
+struct wiphy_hrtimer_work {
+	struct wiphy_work work;
+	struct wiphy *wiphy;
+	struct hrtimer timer;
+};
+
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t);
+
+static inline void wiphy_hrtimer_work_init(struct wiphy_hrtimer_work *hrwork,
+					   wiphy_work_func_t func)
+{
+	hrtimer_setup(&hrwork->timer, wiphy_hrtimer_work_timer,
+		      CLOCK_BOOTTIME, HRTIMER_MODE_REL);
+	wiphy_work_init(&hrwork->work, func);
+}
+
+/**
+ * wiphy_hrtimer_work_queue - queue hrtimer work for the wiphy
+ * @wiphy: the wiphy to queue for
+ * @hrwork: the high resolution timer worker
+ * @delay: the delay given as a ktime_t
+ *
+ * Please refer to wiphy_delayed_work_queue(). The difference is that
+ * the hrtimer work uses a high resolution timer for scheduling. This
+ * may be needed if timeouts might be scheduled further in the future
+ * and the accuracy of the normal timer is not sufficient.
+ *
+ * Expect a delay of a few milliseconds as the timer is scheduled
+ * with some slack and some more time may pass between queueing the
+ * work and its start.
+ */
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+			      struct wiphy_hrtimer_work *hrwork,
+			      ktime_t delay);
+
+/**
+ * wiphy_hrtimer_work_cancel - cancel previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrtimer: the hrtimer work to cancel
+ *
+ * Cancel the work *without* waiting for it, this assumes being
+ * called under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+			       struct wiphy_hrtimer_work *hrtimer);
+
+/**
+ * wiphy_hrtimer_work_flush - flush previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to flush
+ *
+ * Flush the work (i.e. run it if pending). This must be called
+ * under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+			      struct wiphy_hrtimer_work *hrwork);
+
+/**
+ * wiphy_hrtimer_work_pending - Find out whether a wiphy hrtimer
+ * work item is currently pending.
+ *
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work in question
+ *
+ * Return: true if timer is pending, false otherwise
+ *
+ * Please refer to the wiphy_delayed_work_pending() documentation as
+ * this is the equivalent function for hrtimer based delayed work
+ * items.
+ */
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+				struct wiphy_hrtimer_work *hrwork);
+
 /**
  * enum ieee80211_ap_reg_power - regulatory power for an Access Point
  *
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6d6500148c4b..993008cdea65 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -252,8 +252,8 @@ struct scsi_device {
 	unsigned int queue_stopped;	/* request queue is quiesced */
 	bool offline_already;		/* Device offline message logged */
 
-	unsigned int ua_new_media_ctr;	/* Counter for New Media UNIT ATTENTIONs */
-	unsigned int ua_por_ctr;	/* Counter for Power On / Reset UAs */
+	atomic_t ua_new_media_ctr;	/* Counter for New Media UNIT ATTENTIONs */
+	atomic_t ua_por_ctr;		/* Counter for Power On / Reset UAs */
 
 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
 
@@ -693,10 +693,8 @@ static inline int scsi_device_busy(struct scsi_device *sdev)
 }
 
 /* Macros to access the UNIT ATTENTION counters */
-#define scsi_get_ua_new_media_ctr(sdev) \
-	((const unsigned int)(sdev->ua_new_media_ctr))
-#define scsi_get_ua_por_ctr(sdev) \
-	((const unsigned int)(sdev->ua_por_ctr))
+#define scsi_get_ua_new_media_ctr(sdev)	atomic_read(&sdev->ua_new_media_ctr)
+#define scsi_get_ua_por_ctr(sdev)	atomic_read(&sdev->ua_por_ctr)
 
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
index cde8f173f566..22acaaec7b1c 100644
--- a/include/uapi/linux/fb.h
+++ b/include/uapi/linux/fb.h
@@ -319,7 +319,7 @@ enum {
 #define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
 #define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
 #define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* vertical syncs can be detected */
 
 struct fb_vblank {
 	__u32 flags;			/* FB_VBLANK flags */
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 4a9fbf42aa9f..9cd89bcc1d9c 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -631,6 +631,18 @@
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */
 
+/*
+ * Keycodes for hotkeys toggling the electronic privacy screen found on some
+ * laptops on/off. Note when the embedded-controller turns on/off the eprivacy
+ * screen itself then the state should be reported through drm connecter props:
+ * https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
+ * Except when implementing the drm connecter properties API is not possible
+ * because e.g. the firmware does not allow querying the presence and/or status
+ * of the eprivacy screen at boot.
+ */
+#define KEY_EPRIVACY_SCREEN_ON		0x252
+#define KEY_EPRIVACY_SCREEN_OFF		0x253
+
 #define KEY_KBDINPUTASSIST_PREV		0x260
 #define KEY_KBDINPUTASSIST_NEXT		0x261
 #define KEY_KBDINPUTASSIST_PREVGROUP		0x262
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 8bf27ab8bcb4..1db45b01532b 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -193,7 +193,8 @@ struct virtio_net_hdr_v1 {
 
 struct virtio_net_hdr_v1_hash {
 	struct virtio_net_hdr_v1 hdr;
-	__le32 hash_value;
+	__le16 hash_value_lo;
+	__le16 hash_value_hi;
 #define VIRTIO_NET_HASH_REPORT_NONE            0
 #define VIRTIO_NET_HASH_REPORT_IPv4            1
 #define VIRTIO_NET_HASH_REPORT_TCPv4           2