diff options
Diffstat (limited to 'Documentation/devicetree')
165 files changed, 5410 insertions, 1939 deletions
diff --git a/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml index 32bf3a1c3b42..5fb708471059 100644 --- a/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml +++ b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml @@ -21,6 +21,9 @@ properties: dma-coherent: true + iommus: + maxItems: 4 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 08fe6a707a37..c3408dcf5d20 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - qcom,kaanapali-inline-crypto-engine - qcom,qcs8300-inline-crypto-engine - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml index ed7e16bd11d3..597441d94cf1 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -20,6 +20,7 @@ properties: - qcom,ipq5332-trng - qcom,ipq5424-trng - qcom,ipq9574-trng + - qcom,kaanapali-trng - qcom,qcs615-trng - qcom,qcs8300-trng - qcom,sa8255p-trng diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index e009cb712fb8..79d5be2548bc 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: + - qcom,kaanapali-qce - qcom,qcs615-qce - qcom,qcs8300-qce - qcom,sa8775p-qce diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml index 05442d437755..6211ab8bbb0e 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -49,6 +49,10 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: HDMI output port + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel audio input port + required: - port@0 - port@1 @@ -98,5 +102,13 @@ examples: remote-endpoint = <&hdmi0_con>; }; }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index ba644c30dcf4..17d1f97ce8c2 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - ite,it66121 + - ite,it66122 - ite,it6610 reg: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index c167795c63f6..b95f10edd3a2 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -14,6 +14,9 @@ description: | R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + properties: compatible: enum: @@ -80,14 +83,14 @@ required: - resets - ports -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> #include <dt-bindings/power/r8a779a0-sysc.h> - dsi0: dsi-encoder@fed80000 { + dsi@fed80000 { compatible = "renesas,r8a779a0-dsi-csi2-tx"; reg = <0xfed80000 0x10000>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -117,4 +120,51 @@ examples: }; }; }; + + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + + dsi@fed80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + dsi0port1_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <1 2>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0port1_out>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 9ef587d46506..20c7e0a77802 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -27,7 +27,9 @@ properties: - const: adi,adv7123 - enum: - adi,adv7123 + - asl-tek,cs5263 - dumb-vga-dac + - parade,ps185hdm - radxa,ra620 - realtek,rtd2171 - ti,opa362 diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml new file mode 100644 index 000000000000..4f99682a308d --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Audio Interface + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: + The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the + Audio Subsystem to the HDMI TX Controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index aeb4e4f36044..ebda78db87a6 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -18,6 +18,7 @@ properties: compatible: oneOf: - enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,sc7180-dp - qcom,sc7280-dp @@ -33,6 +34,11 @@ properties: - items: - enum: + - qcom,qcs8300-dp + - const: qcom,sa8775p-dp + + - items: + - enum: - qcom,sm6350-dp - const: qcom,sc7180-dp @@ -55,6 +61,12 @@ properties: - items: - enum: + - qcom,sm6150-dp + - const: qcom,sm8150-dp + - const: qcom,sm8350-dp + + - items: + - enum: - qcom,sm8750-dp - const: qcom,sm8650-dp @@ -195,9 +207,11 @@ allOf: compatible: contains: enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,x1e80100-dp then: + $ref: /schemas/sound/dai-common.yaml# oneOf: - required: - aux-bus @@ -239,6 +253,7 @@ allOf: enum: # these platforms support 2 streams MST on some interfaces, # others are SST only + - qcom,glymur-dp - qcom,sc8280xp-dp - qcom,x1e80100-dp then: @@ -295,7 +310,7 @@ allOf: minItems: 6 maxItems: 8 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index afc187935744..e32056ae0f5d 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -21,7 +21,7 @@ properties: compatible: oneOf: - items: - - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-gmu-[6-8][0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu - items: - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$' @@ -303,6 +303,64 @@ allOf: properties: compatible: contains: + const: qcom,adreno-gmu-840.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-x285.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + - description: GMU RSCC HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + - const: rscc + + - if: + properties: + compatible: + contains: const: qcom,adreno-gmu-wrapper then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml new file mode 100644 index 000000000000..2329ed96e6cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Glymur Display MDSS + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,glymur-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,glymur-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,glymur-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + resets = <&disp_cc_mdss_core_bcr>; + + power-domains = <&mdss_gdsc>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,glymur-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,glymur-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0x600>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>, + <&dispcc_dptx0_pixel1_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>, + <&dispcc_mdss_dptx0_pixel1_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml new file mode 100644 index 000000000000..e96baaae9ba9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCS8300 Display MDSS + +maintainers: + - Yongxing Mou <yongxing.mou@oss.qualcomm.com> + +description: + QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces and EDP etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,qcs8300-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,qcs8300-edp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,qcs8300-gcc.h> + #include <dt-bindings/clock/qcom,sa8775p-dispcc.h> + #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss: display-subsystem@ae00000 { + compatible = "qcom,qcs8300-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_mdp_clk>; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0_phy: phy@aec2a00 { + compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; + + reg = <0x0aec2a00 0x200>, + <0x0aec2200 0xd0>, + <0x0aec2600 0xd0>, + <0x0aec2000 0x1c8>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + }; + + displayport-controller@af54000 { + compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp"; + + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + reg = <0xaf54000 0x104>, + <0xaf54200 0x0c0>, + <0xaf55000 0x770>, + <0xaf56000 0x09c>, + <0xaf57000 0x09c>, + <0xaf58000 0x09c>, + <0xaf59000 0x09c>, + <0xaf5a000 0x23c>, + <0xaf5b000 0x23c>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>; + phys = <&mdss_dp0_phy>; + phy-names = "dp"; + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml index 9ac24f99d3ad..46e9335f849f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -51,6 +51,14 @@ patternProperties: compatible: const: qcom,sm6150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,sm6150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true @@ -130,35 +138,37 @@ examples: #size-cells = <0>; port@0 { - reg = <0>; - dpu_intf0_out: endpoint { - }; + reg = <0>; + + dpu_intf0_out: endpoint { + }; }; port@1 { - reg = <1>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; }; - opp-25600000 { - opp-hz = /bits/ 64 <25600000>; - required-opps = <&rpmhpd_opp_svs>; + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; }; opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - required-opps = <&rpmhpd_opp_nom>; + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index 0a46120dd868..fe296e3186d0 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,11 +13,17 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - enum: - - qcom,sa8775p-dpu - - qcom,sm8650-dpu - - qcom,sm8750-dpu - - qcom,x1e80100-dpu + oneOf: + - enum: + - qcom,glymur-dpu + - qcom,sa8775p-dpu + - qcom,sm8650-dpu + - qcom,sm8750-dpu + - qcom,x1e80100-dpu + - items: + - enum: + - qcom,qcs8300-dpu + - const: qcom,sa8775p-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml new file mode 100644 index 000000000000..02f7fb1f16dc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek IL79900a based MIPI-DSI panels + +maintainers: + - Langyan Ye <yelangyan@huaqin.corp-partner.google.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,tl121bvms07-00 + - const: ilitek,il79900a + + reg: + maxItems: 1 + description: DSI virtual channel used by the panel + + enable-gpios: + maxItems: 1 + description: GPIO specifier for the enable pin + + avdd-supply: + description: Positive analog voltage supply (AVDD) + + avee-supply: + description: Negative analog voltage supply (AVEE) + + pp1800-supply: + description: 1.8V logic voltage supply + + backlight: true + +required: + - compatible + - reg + - enable-gpios + - avdd-supply + - avee-supply + - pp1800-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,tl121bvms07-00", "ilitek,il79900a"; + reg = <0>; + enable-gpios = <&pio 25 0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + pp1800-supply = <®_pp1800>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index 434cc6af9c95..d979701a00a8 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -20,9 +20,11 @@ properties: - bananapi,lhr050h41 - bestar,bsd1218-a101kl68 - feixin,k101-im2byl02 + - raspberrypi,dsi-5inch - raspberrypi,dsi-7inch - startek,kd050hdfia020 - tdo,tl050hdv35 + - wanchanglong,w552946aaa - wanchanglong,w552946aba - const: ilitek,ili9881c @@ -30,6 +32,7 @@ properties: maxItems: 1 backlight: true + port: true power-supply: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml new file mode 100644 index 000000000000..0f0b9079f199 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Corporation 7" WXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,ld070wx3-sl01 + + reg: + maxItems: 1 + + vdd-supply: true + vcc-supply: true + + backlight: true + port: true + +required: + - compatible + - vdd-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + vdd-supply = <&vdd_3v3_lcd>; + vcc-supply = <&vcc_1v8_lcd>; + + backlight = <&backlight>; + + port { + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 4388d5375851..dbc01e640895 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -59,6 +59,8 @@ properties: # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a - tbs,a711-panel + # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel + - winstar,wf70a8syjhlnga - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 9b92a05791cc..8d668979b62d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -19,6 +19,9 @@ description: | If the panel is more advanced a dedicated binding file is required. +allOf: + - $ref: panel-common.yaml# + properties: compatible: @@ -42,8 +45,6 @@ properties: - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel - lg,acx467akm-7 - # LG Corporation 7" WXGA TFT LCD panel - - lg,ld070wx3-sl01 # LG Corporation 5" HD TFT LCD panel - lg,lh500wx1-sd03 # Lincoln LCD197 5" 1080x1920 LCD panel @@ -56,10 +57,6 @@ properties: - panasonic,vvx10f034n00 # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel - samsung,s6e3fa7-ams559nk06 - # Samsung s6e3fc2x01 1080x2340 AMOLED panel - - samsung,s6e3fc2x01 - # Samsung sofef00 1080x2280 AMOLED panel - - samsung,sofef00 # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel - tdo,tl070wsh30 @@ -72,31 +69,12 @@ properties: reset-gpios: true port: true power-supply: true - vddio-supply: true - -allOf: - - $ref: panel-common.yaml# - - if: - properties: - compatible: - enum: - - samsung,s6e3fc2x01 - - samsung,sofef00 - then: - properties: - power-supply: false - required: - - vddio-supply - else: - properties: - vddio-supply: false - required: - - power-supply additionalProperties: false required: - compatible + - power-supply - reg examples: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 2017428d8828..24e277b19094 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -184,6 +184,8 @@ properties: - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel + - jutouch,jt101tm023 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel @@ -268,6 +270,8 @@ properties: - qiaodian,qd43003c0-40 # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel - qishenglong,gopher2b-lcd + # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480 + - raystar,rff500f-awh-dnn # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel @@ -276,6 +280,8 @@ properties: - rocktech,rk043fn48h # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel - samsung,ltl101al01 + # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel + - samsung,ltl106al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 04f86e0cbac9..694037301583 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -9,6 +9,9 @@ title: Ronbo RB070D30 DSI Display Panel maintainers: - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: panel-common.yaml# + properties: compatible: const: ronbo,rb070d30 @@ -20,10 +23,6 @@ properties: description: GPIO used for the power pin maxItems: 1 - reset-gpios: - description: GPIO used for the reset pin - maxItems: 1 - shlr-gpios: description: GPIO used for the shlr pin (horizontal flip) maxItems: 1 @@ -35,10 +34,6 @@ properties: vcc-lcd-supply: description: Power regulator - backlight: - description: Backlight used by the panel - $ref: /schemas/types.yaml#/definitions/phandle - required: - compatible - power-gpios @@ -47,5 +42,6 @@ required: - shlr-gpios - updn-gpios - vcc-lcd-supply + - port -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml index ccb574caed28..f1723e910252 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -33,6 +33,8 @@ properties: - samsung,atna45dc02 # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel - samsung,atna56ac03 + # Samsung 16.0" 3K (2880x1800 pixels) eDP AMOLED panel + - samsung,atna60cl08 - const: samsung,atna33xc20 enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml new file mode 100644 index 000000000000..d48354fb52ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e3fc2x01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E3FC2X01 AMOLED DDIC + +description: The S6E3FC2X01 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.41 inch, 1080x2340 pixels, 19.5:9 ratio + - samsung,s6e3fc2x01-ams641rw + - const: samsung,s6e3fc2x01 + + reg: + maxItems: 1 + + reset-gpios: true + + port: true + + vddio-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + + poc-supply: + description: POC regulator + +required: + - compatible + - reset-gpios + - vddio-supply + - vci-supply + - poc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml new file mode 100644 index 000000000000..eeee3cac72e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,sofef00.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SOFEF00 AMOLED DDIC + +description: The SOFEF00 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.01 inch, 1080x2160 pixels, 18:9 ratio + - samsung,sofef00-ams601nt22 + # Samsung 6.28 inch, 1080x2280 pixels, 19:9 ratio + - samsung,sofef00-ams628nw01 + - const: samsung,sofef00 + + reg: + maxItems: 1 + + poc-supply: + description: POC regulator + + vci-supply: + description: VCI regulator + + vddio-supply: + description: VDD regulator + +required: + - compatible + - reset-gpios + - poc-supply + - vci-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&panel_active>; + pinctrl-1 = <&panel_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml new file mode 100644 index 000000000000..08a35ebbbb3c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +description: > + This panel requires a dual-channel DSI host to operate and it supports + only left-right split mode, where each channel drives the left or right + half of the screen and only video mode. + + Each of the DSI channels controls a separate DSI peripheral. + The peripheral driven by the first link (DSI-LINK1), left one, is + considered the primary peripheral and controls the device. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + const: sharp,lq079l1sx01 + + reg: + maxItems: 1 + + avdd-supply: + description: regulator that supplies the analog voltage + + vddio-supply: + description: regulator that supplies the I/O voltage + + vsp-supply: + description: positive boost supply regulator + + vsn-supply: + description: negative boost supply regulator + + reset-gpios: + maxItems: 1 + + backlight: true + ports: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml new file mode 100644 index 000000000000..152d94367130 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,td4300-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics TDDI Display Panel Controller + +maintainers: + - Kaustabh Chakraborty <kauschluss@disroot.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - syna,td4101-panel + - syna,td4300-panel + + reg: + maxItems: 1 + + vio-supply: + description: core I/O voltage supply + + vsn-supply: + description: negative voltage supply for analog circuits + + vsp-supply: + description: positive voltage supply for analog circuits + + backlight-gpios: + maxItems: 1 + description: backlight enable GPIO + + reset-gpios: true + width-mm: true + height-mm: true + panel-timing: true + +required: + - compatible + - reg + - width-mm + - height-mm + - panel-timing + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + vio-supply = <&panel_vio_reg>; + vsn-supply = <&panel_vsn_reg>; + vsp-supply = <&panel_vsp_reg>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpd3 4 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml index 1e32d14b6edb..2cc66dcef870 100644 --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -25,6 +25,9 @@ properties: - enum: - renesas,r9a07g054-du # RZ/V2L - const: renesas,r9a07g044-du # RZ/G2L fallback + - items: + - const: renesas,r9a09g056-du # RZ/V2N + - const: renesas,r9a09g057-du # RZ/V2H(P) fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml index c59df3c1a3f7..632b48bfabb9 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -17,6 +17,7 @@ properties: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi - rockchip,rk3288-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3399-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi @@ -73,6 +74,7 @@ allOf: enum: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml index 96b4b088eebe..d649808c59da 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml @@ -113,6 +113,14 @@ properties: description: Additional HDMI QP related data is accessed through VO GRF regs. + frl-enable-gpios: + description: + Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and + deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external + voltage bias for HDMI data lines. When not present the HDMI encoder will + operate in TMDS mode only. + maxItems: 1 + required: - compatible - reg @@ -132,8 +140,10 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/rk3588-power.h> #include <dt-bindings/reset/rockchip,rk3588-cru.h> @@ -164,6 +174,7 @@ examples: rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; #sound-dai-cells = <0>; + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml index 5e3e199fd9a4..96d50d14c071 100644 --- a/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/ti,twl4030-gpio.yaml# +$id: http://devicetree.org/schemas/gpio/ti,twl4030-gpio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI TWL4030 GPIO controller diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml index a5b4e0021758..bee9faf1d3f8 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -18,6 +18,8 @@ properties: oneOf: - items: - enum: + - mediatek,mt8196-mali + - nxp,imx95-mali # G310 - rockchip,rk3588-mali - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable @@ -44,7 +46,9 @@ properties: minItems: 1 items: - const: core - - const: coregroup + - enum: + - coregroup + - stacks - const: stacks mali-supply: true @@ -91,7 +95,6 @@ required: - interrupts - interrupt-names - clocks - - mali-supply additionalProperties: false @@ -108,6 +111,29 @@ allOf: power-domains: maxItems: 1 power-domain-names: false + required: + - mali-supply + - if: + properties: + compatible: + contains: + const: mediatek,mt8196-mali + then: + properties: + mali-supply: false + sram-supply: false + operating-points-v2: false + power-domains: + maxItems: 1 + power-domain-names: false + clocks: + maxItems: 2 + clock-names: + items: + - const: core + - const: stacks + required: + - power-domains examples: - | @@ -143,5 +169,17 @@ examples: }; }; }; + - | + gpu@48000000 { + compatible = "mediatek,mt8196-mali", "arm,mali-valhall-csf"; + reg = <0x48000000 0x480000>; + clocks = <&gpufreq 0>, <&gpufreq 1>; + clock-names = "core", "stacks"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&gpufreq>; + }; ... diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml index c87d7bece0ec..225a6e1b7fcd 100644 --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml @@ -15,6 +15,16 @@ properties: oneOf: - items: - enum: + - renesas,r8a7796-gpu + - renesas,r8a77961-gpu + - const: img,img-gx6250 + - const: img,img-rogue + - items: + - const: renesas,r8a77965-gpu + - const: img,img-ge7800 + - const: img,img-rogue + - items: + - enum: - ti,am62-gpu - const: img,img-axe-1-16m # This deprecated element must be kept around to allow old kernels to @@ -86,48 +96,56 @@ allOf: properties: compatible: contains: - const: img,img-axe-1-16m + enum: + - ti,am62-gpu + - ti,j721s2-gpu then: properties: - power-domains: - items: - - description: Power domain A - power-domain-names: + clocks: maxItems: 1 - required: - - power-domains - - power-domain-names - if: properties: compatible: contains: - const: thead,th1520-gpu + enum: + - img,img-ge7800 + - img,img-gx6250 + - thead,th1520-gpu then: properties: clocks: minItems: 3 clock-names: minItems: 3 + + - if: + properties: + compatible: + contains: + const: img,img-axe-1-16m + then: + properties: power-domains: - items: - - description: The single, unified power domain for the GPU on the - TH1520 SoC, integrating all internal IP power domains. - power-domain-names: false + maxItems: 1 + power-domain-names: + maxItems: 1 required: - power-domains + - power-domain-names - if: properties: compatible: contains: - const: img,img-bxs-4-64 + enum: + - img,img-bxs-4-64 + - img,img-ge7800 + - img,img-gx6250 then: properties: power-domains: - items: - - description: Power domain A - - description: Power domain B + minItems: 2 power-domain-names: minItems: 2 required: @@ -138,13 +156,16 @@ allOf: properties: compatible: contains: - enum: - - ti,am62-gpu - - ti,j721s2-gpu + const: thead,th1520-gpu then: properties: - clocks: - maxItems: 1 + power-domains: + items: + - description: The single, unified power domain for the GPU on the + TH1520 SoC, integrating all internal IP power domains. + power-domain-names: false + required: + - power-domains examples: - | diff --git a/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml b/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml new file mode 100644 index 000000000000..9460c64071f2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/apm,xgene-slimpro-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro Mailbox I2C + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +description: + An I2C controller accessed over the "SLIMpro" mailbox. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: apm,xgene-slimpro-i2c + + mboxes: + maxItems: 1 + +required: + - compatible + - mboxes + +unevaluatedProperties: false + +examples: + - | + i2c { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt deleted file mode 100644 index f6b2c20cfbf6..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt +++ /dev/null @@ -1,15 +0,0 @@ -APM X-Gene SLIMpro Mailbox I2C Driver - -An I2C controller accessed over the "SLIMpro" mailbox. - -Required properties : - - - compatible : should be "apm,xgene-slimpro-i2c" - - mboxes : use the label reference for the mailbox as the first parameter. - The second parameter is the channel number. - -Example : - i2cslimpro { - compatible = "apm,xgene-slimpro-i2c"; - mboxes = <&mailbox 0>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index 3d60d9e9e208..d0fad930de9d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -39,6 +39,9 @@ properties: - amlogic,a4-gpio-ao-intc - amlogic,a5-gpio-intc - amlogic,c3-gpio-intc + - amlogic,s6-gpio-intc + - amlogic,s7-gpio-intc + - amlogic,s7d-gpio-intc - amlogic,t7-gpio-intc - const: amlogic,meson-gpio-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml index 55636d06a674..999df5b905c5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml @@ -25,13 +25,14 @@ properties: interrupt-controller: true '#interrupt-cells': - const: 2 + const: 1 description: The first cell is the IRQ number, the second cell is the trigger type as defined in interrupt.txt in this directory. interrupts: - maxItems: 6 + minItems: 1 + maxItems: 10 description: | Depend to which INTC0 or INTC1 used. INTC0 and INTC1 are two kinds of interrupt controller with enable and raw @@ -74,13 +75,17 @@ examples: interrupt-controller@12101b00 { compatible = "aspeed,ast2700-intc-ic"; reg = <0 0x12101b00 0 0x10>; - #interrupt-cells = <2>; + #interrupt-cells = <1>; interrupt-controller; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index f683d696909b..6fdb7ae9e85a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -58,6 +58,7 @@ properties: - const: andestech,nceplic100 - items: - enum: + - anlogic,dr1v90-plic - canaan,k210-plic - eswin,eic7700-plic - sifive,fu540-c000-plic @@ -76,6 +77,9 @@ properties: - thead,th1520-plic - const: thead,c900-plic - items: + - const: ultrarisc,dp1000-plic + - const: ultrarisc,cp100-plic + - items: - const: sifive,plic-1.0.0 - const: riscv,plic0 deprecated: true diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml index d6fb08a54167..62fd220e126e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml @@ -4,18 +4,23 @@ $id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-mswi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sophgo sg2042 CLINT Machine-level Software Interrupt Device +title: ACLINT Machine-level Software Interrupt Device maintainers: - Inochi Amaoto <inochiama@outlook.com> properties: compatible: - items: - - enum: - - sophgo,sg2042-aclint-mswi - - sophgo,sg2044-aclint-mswi - - const: thead,c900-aclint-mswi + oneOf: + - items: + - enum: + - sophgo,sg2042-aclint-mswi + - sophgo,sg2044-aclint-mswi + - const: thead,c900-aclint-mswi + - items: + - enum: + - anlogic,dr1v90-aclint-mswi + - const: nuclei,ux900-aclint-mswi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml index c1ab865fcd64..d02c6886283a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml @@ -30,6 +30,10 @@ properties: - const: thead,c900-aclint-sswi - items: - const: mips,p8700-aclint-sswi + - items: + - enum: + - anlogic,dr1v90-aclint-sswi + - const: nuclei,ux900-aclint-sswi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 89495f094d52..c9efdd1a6d1c 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -89,6 +89,8 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml new file mode 100644 index 000000000000..fc4fcd19922a --- /dev/null +++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali-C55 Image Signal Processor + +maintainers: + - Daniel Scally <dan.scally@ideasonboard.com> + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +properties: + compatible: + const: arm,mali-c55 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ISP Video Clock + - description: ISP AXI clock + - description: ISP AHB-lite clock + + clock-names: + items: + - const: vclk + - const: aclk + - const: hclk + + resets: + items: + - description: vclk domain reset + - description: aclk domain reset + - description: hclk domain reset + + reset-names: + items: + - const: vresetn + - const: aresetn + - const: hresetn + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Input parallel video bus + + properties: + endpoint: + $ref: /schemas/graph.yaml#/properties/endpoint + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + isp@400000 { + compatible = "arm,mali-c55"; + reg = <0x400000 0x200000>; + clocks = <&clk 0>, <&clk 1>, <&clk 2>; + clock-names = "vclk", "aclk", "hclk"; + resets = <&resets 0>, <&resets 1>, <&resets 2>; + reset-names = "vresetn", "aresetn", "hresetn"; + interrupts = <GIC_SPI 861 IRQ_TYPE_EDGE_RISING>; + + port { + isp_in: endpoint { + remote-endpoint = <&csi2_rx_out>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml new file mode 100644 index 000000000000..8e8d62436e0d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9719.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9719 Voice Coil Motor (VCM) Controller + +maintainers: + - André Apitzsch <git@apitzsch.eu> + +description: + The Dongwoon DW9718S/9719/9761 is a single 10-bit digital-to-analog converter + with 100 mA output current sink capability, designed for linear control of + voice coil motors (VCM) in camera lenses. This chip provides a Smart Actuator + Control (SAC) mode intended for driving voice coil lenses in camera modules. + +properties: + compatible: + enum: + - dongwoon,dw9718s + - dongwoon,dw9719 + - dongwoon,dw9761 + - dongwoon,dw9800k + + reg: + maxItems: 1 + + vdd-supply: + description: VDD power supply + + dongwoon,sac-mode: + description: | + Slew Rate Control mode to use: direct, LSC (Linear Slope Control) or + SAC1-SAC6 (Smart Actuator Control). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Direct mode + - 1 # LSC mode + - 2 # SAC1 mode (operation time# 0.32 x Tvib) + - 3 # SAC2 mode (operation time# 0.48 x Tvib) + - 4 # SAC3 mode (operation time# 0.72 x Tvib) + - 5 # SAC4 mode (operation time# 1.20 x Tvib) + - 6 # SAC5 mode (operation time# 1.64 x Tvib) + - 7 # SAC6 mode (operation time# 1.88 x Tvib) + default: 4 + + dongwoon,vcm-prescale: + description: + Indication of VCM switching frequency dividing rate select. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - vdd-supply + +allOf: + - if: + properties: + compatible: + contains: + const: dongwoon,dw9718s + then: + properties: + dongwoon,vcm-prescale: + description: + The final frequency is 10 MHz divided by (value + 2). + maximum: 15 + default: 0 + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + actuator@c { + compatible = "dongwoon,dw9718s"; + reg = <0x0c>; + + vdd-supply = <&pm8937_l17>; + + dongwoon,sac-mode = <4>; + dongwoon,vcm-prescale = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml new file mode 100644 index 000000000000..477e59316dfa --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/nxp,tda19971.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA1997x HDMI receiver + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The TDA19971/73 are HDMI video receivers. + + The TDA19971 Video port output pins can be used as follows: + - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4] + - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4] + - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4] + - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2] + - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0] + - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles) + - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles) + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + + The TDA19973 Video port output pins can be used as follows: + - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0] + - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0] + - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0] + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + + The Video port output pins are mapped via 4-bit 'pin groups' allowing + for a variety of connection possibilities including swapping pin order within + pin groups. The video_portcfg device-tree property consists of register mapping + pairs which map a chip-specific VP output register to a 4-bit pin group. If + the pin group needs to be bit-swapped you can use the *_S pin-group defines. + +properties: + compatible: + enum: + - nxp,tda19971 + - nxp,tda19973 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + DOVDD-supply: true + + DVDD-supply: true + + AVDD-supply: true + + '#sound-dai-cells': + const: 0 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + nxp,vidout-portcfg: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 4 + items: + items: + - description: Video Port control registers index. + maximum: 8 + minimum: 0 + - description: pin(pinswapped) groups + + description: + array of pairs mapping VP output pins to pin groups. + + nxp,audout-format: + enum: + - i2s + - spdif + + nxp,audout-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 24, 32] + description: + width of audio output data bus. + + nxp,audout-layout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used). + + nxp,audout-mclk-fs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Multiplication factor between stream rate and codec mclk. + +required: + - compatible + - reg + - interrupts + - DOVDD-supply + - AVDD-supply + - DVDD-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/media/tda1997x.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-receiver@48 { + compatible = "nxp,tda19971"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p8v>; + /* audio */ + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same pixclk cycle. + */ + nxp,vidout-portcfg = + /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt deleted file mode 100644 index e76167999d76..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt +++ /dev/null @@ -1,178 +0,0 @@ -Device-Tree bindings for the NXP TDA1997x HDMI receiver - -The TDA19971/73 are HDMI video receivers. - -The TDA19971 Video port output pins can be used as follows: - - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4] - - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4] - - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4] - - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2] - - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0] - - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles) - - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles) - - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) - -The TDA19973 Video port output pins can be used as follows: - - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0] - - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0] - - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0] - - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) - -The Video port output pins are mapped via 4-bit 'pin groups' allowing -for a variety of connection possibilities including swapping pin order within -pin groups. The video_portcfg device-tree property consists of register mapping -pairs which map a chip-specific VP output register to a 4-bit pin group. If -the pin group needs to be bit-swapped you can use the *_S pin-group defines. - -Required Properties: - - compatible : - - "nxp,tda19971" for the TDA19971 - - "nxp,tda19973" for the TDA19973 - - reg : I2C slave address - - interrupts : The interrupt number - - DOVDD-supply : Digital I/O supply - - DVDD-supply : Digital Core supply - - AVDD-supply : Analog supply - - nxp,vidout-portcfg : array of pairs mapping VP output pins to pin groups. - -Optional Properties: - - nxp,audout-format : DAI bus format: "i2s" or "spdif". - - nxp,audout-width : width of audio output data bus (1-4). - - nxp,audout-layout : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used). - - nxp,audout-mclk-fs : Multiplication factor between stream rate and codec - mclk. - -The port node shall contain one endpoint child node for its digital -output video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Optional Endpoint Properties: - The following three properties are defined in video-interfaces.txt and - are valid for the output parallel bus endpoint: - - hsync-active: Horizontal synchronization polarity. Defaults to active high. - - vsync-active: Vertical synchronization polarity. Defaults to active high. - - data-active: Data polarity. Defaults to active high. - -Examples: - - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] - * and Y[11:4] across 16bits in the same pixclk cycle. - */ - nxp,vidout-portcfg = - /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, - /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, - /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ - < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, - /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ - < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; - - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] - * and Y[11:4] across 16bits in the same pixclk cycle. - */ - nxp,vidout-portcfg = - /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, - /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, - /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ - < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, - /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ - < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; - - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over - * 2 pixclk cycles. - */ - nxp,vidout-portcfg = - /* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >, - /* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >, - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml new file mode 100644 index 000000000000..20f48d5e9b2d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX111 8MP CMOS Digital Image Sensor + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +description: + IMX111 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 2464H x 3280V. It is programmable through I2C interface. Image + data is sent through MIPI CSI-2, through 1 or 2 lanes. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + - $ref: /schemas/nvmem/nvmem-consumer.yaml# + +properties: + compatible: + const: sony,imx111 + + reg: + maxItems: 1 + + clocks: + description: EXTCLK with possible frequency from 6 to 54 MHz + maxItems: 1 + + reset-gpios: + maxItems: 1 + + iovdd-supply: + description: Digital IO power supply (1.8V) + + dvdd-supply: + description: Digital power supply (1.2V) + + avdd-supply: + description: Analog power supply (2.7V) + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@10 { + compatible = "sony,imx111"; + reg = <0x10>; + + clocks = <&imx111_clk>; + + iovdd-supply = <&camera_vddio_1v8>; + dvdd-supply = <&camera_vddd_1v2>; + avdd-supply = <&camera_vdda_2v7>; + + orientation = <1>; + rotation = <90>; + + nvmem = <&eeprom>; + flash-leds = <&led>; + lens-focus = <&vcm>; + + reset-gpios = <&gpio 84 GPIO_ACTIVE_LOW>; + + port { + imx111_output: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <542400000>; + remote-endpoint = <&csi_input>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml index 3c071e6fbea6..060ac6829b66 100644 --- a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml +++ b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml @@ -25,7 +25,11 @@ allOf: properties: compatible: - const: st,vd55g1 + enum: + - st,vd55g1 + - st,vd65g4 + description: + VD55G1 is the monochrome variant, while VD65G4 is the color one. reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt deleted file mode 100644 index 94b908ace53c..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt +++ /dev/null @@ -1,157 +0,0 @@ -* Texas Instruments TVP5150 and TVP5151 video decoders - -The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL -(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV -with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. - -Required Properties: -==================== -- compatible: Value must be "ti,tvp5150". -- reg: I2C slave address. - -Optional Properties: -==================== -- pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any. -- reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any. - -The device node must contain one 'port' child node per device physical input -and output port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows - - Name Type Port - -------------------------------------- - AIP1A sink 0 - AIP1B sink 1 - Y-OUT src 2 - -The device node must contain at least one sink port and the src port. Each input -port must be linked to an endpoint defined in [1]. The port/connector layout is -as follows - -tvp-5150 port@0 (AIP1A) - endpoint@0 -----------> Comp0-Con port - endpoint@1 ------+----> Svideo-Con port -tvp-5150 port@1 (AIP1B) | - endpoint@1 ------+ - endpoint@0 -----------> Comp1-Con port -tvp-5150 port@2 - endpoint (video bitstream output at YOUT[0-7] parallel bus) - -Required Endpoint Properties for parallel synchronization on output port: -========================================================================= - -- hsync-active: Active state of the HSYNC signal. Must be <1> (HIGH). -- vsync-active: Active state of the VSYNC signal. Must be <1> (HIGH). -- field-even-active: Field signal level during the even field data - transmission. Must be <0>. - -Note: Do not specify any of these properties if you want to use the embedded - BT.656 synchronization. - -Optional Connector Properties: -============================== - -- sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechanism. Please look at - [1] for more information. - -[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. - -Example - three input sources: -#include <dt-bindings/display/sdtv-standards.h> - -comp_connector_0 { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */ - - port { - composite0_to_tvp5150: endpoint { - remote-endpoint = <&tvp5150_to_composite0>; - }; - }; -}; - -comp_connector_1 { - compatible = "composite-video-connector"; - label = "Composite1"; - sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */ - - port { - composite1_to_tvp5150: endpoint { - remote-endpoint = <&tvp5150_to_composite1>; - }; - }; -}; - -svideo_connector { - compatible = "svideo-connector"; - label = "S-Video"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - svideo_luma_to_tvp5150: endpoint@0 { - reg = <0>; - remote-endpoint = <&tvp5150_to_svideo_luma>; - }; - - svideo_chroma_to_tvp5150: endpoint@1 { - reg = <1>; - remote-endpoint = <&tvp5150_to_svideo_chroma>; - }; - }; -}; - -&i2c2 { - tvp5150@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tvp5150_to_composite0: endpoint@0 { - reg = <0>; - remote-endpoint = <&composite0_to_tvp5150>; - }; - - tvp5150_to_svideo_luma: endpoint@1 { - reg = <1>; - remote-endpoint = <&svideo_luma_to_tvp5150>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tvp5150_to_composite1: endpoint@0 { - reg = <0>; - remote-endpoint = <&composite1_to_tvp5150>; - }; - - tvp5150_to_svideo_chroma: endpoint@1 { - reg = <1>; - remote-endpoint = <&svideo_chroma_to_tvp5150>; - }; - }; - - port@2 { - reg = <2>; - - tvp5150_1: endpoint { - remote-endpoint = <&ccdc_ep>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml new file mode 100644 index 000000000000..382a29652a05 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,tvp5150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TVP5150 and TVP5151 video decoders + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL + (and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV + with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. + +properties: + compatible: + const: ti,tvp5150 + + reg: + maxItems: 1 + + pdn-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + sink port node, AIP1A + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + sink port node, AIP1B + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + source port node, Y-OUT + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - port@2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/sdtv-standards.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&composite0_to_tvp5150>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_luma_to_tvp5150>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&composite1_to_tvp5150>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_chroma_to_tvp5150>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&ccdc_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml index f43b91984f01..001a0d9b71e0 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -22,6 +22,7 @@ properties: - fsl,imx8mn-isi - fsl,imx8mp-isi - fsl,imx8ulp-isi + - fsl,imx91-isi - fsl,imx93-isi reg: @@ -66,7 +67,6 @@ required: - interrupts - clocks - clock-names - - fsl,blk-ctrl - ports allOf: @@ -77,6 +77,7 @@ allOf: enum: - fsl,imx8mn-isi - fsl,imx8ulp-isi + - fsl,imx91-isi - fsl,imx93-isi then: properties: @@ -109,6 +110,16 @@ allOf: - port@0 - port@1 + - if: + properties: + compatible: + not: + contains: + const: fsl,imx91-isi + then: + required: + - fsl,blk-ctrl + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml new file mode 100644 index 000000000000..77b389d76a43 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8939 Camera Subsystem (CAMSS) + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8939-camss + + reg: + maxItems: 11 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csid0 + - const: csid1 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + - const: csid2 + - const: vfe0_vbif + + clocks: + maxItems: 24 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe_ahb + - const: vfe_axi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + + interrupts: + maxItems: 7 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csid0 + - const: csid1 + - const: ispif + - const: vfe0 + - const: csid2 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: VFE GDSC - Video Front End, Global Distributed Switch + Controller. + + vdda-supply: + description: + Definition of the regulator used as 1.2V analog power supply. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + bus-type: + enum: + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY + + required: + - data-lanes + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - power-domains + - vdda-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8939.h> + + isp@1b0ac00 { + compatible = "qcom,msm8939-camss"; + + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>, + <0x01b08800 0x100>, + <0x01b40000 0x200>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0", + "csid2", + "vfe0_vbif"; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>, + <&gcc GCC_CAMSS_CSI2_AHB_CLK>, + <&gcc GCC_CAMSS_CSI2_CLK>, + <&gcc GCC_CAMSS_CSI2PHY_CLK>, + <&gcc GCC_CAMSS_CSI2PIX_CLK>, + <&gcc GCC_CAMSS_CSI2RDI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0", + "csid2"; + + iommus = <&apps_iommu 3>; + + power-domains = <&gcc VFE_GDSC>; + + vdda-supply = <®_1v2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + data-lanes = <0 2>; + remote-endpoint = <&sensor_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml new file mode 100644 index 000000000000..9c8de722601e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml @@ -0,0 +1,375 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8650-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Camera Subsystem (CAMSS) + +maintainers: + - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sm8650-camss + + reg: + maxItems: 17 + + reg-names: + items: + - const: csid_wrapper + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + clocks: + maxItems: 33 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cpas_fast_ahb + - const: cpas_vfe0 + - const: cpas_vfe1 + - const: cpas_vfe2 + - const: cpas_vfe_lite + - const: csid + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy4 + - const: csiphy4_timer + - const: csiphy5 + - const: csiphy5_timer + - const: csiphy_rx + - const: gcc_axi_hf + - const: qdss_debug_xo + - const: vfe0 + - const: vfe0_fast_ahb + - const: vfe1 + - const: vfe1_fast_ahb + - const: vfe2 + - const: vfe2_fast_ahb + - const: vfe_lite + - const: vfe_lite_ahb + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + + interrupts: + maxItems: 16 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: ahb + - const: hf_mnoc + + iommus: + maxItems: 3 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: ife2 + - const: top + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + patternProperties: + "^port@[0-5]$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + description: + Input port for receiving CSI data from a CSIPHY. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + bus-type: + enum: + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY + + required: + - data-lanes + + vdd-csiphy01-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY0 and CSIPHY1 IP blocks. + + vdd-csiphy01-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY0 and CSIPHY1 IP blocks. + + vdd-csiphy24-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY2 and CSIPHY4 IP blocks. + + vdd-csiphy24-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY2 and CSIPHY4 IP blocks. + + vdd-csiphy35-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY3 and CSIPHY5 IP blocks. + + vdd-csiphy35-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY3 and CSIPHY5 IP blocks. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - power-domains + - power-domain-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8650-camcc.h> + #include <dt-bindings/clock/qcom,sm8650-gcc.h> + #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + isp@acb6000 { + compatible = "qcom,sm8650-camss"; + reg = <0 0x0acb6000 0 0x1000>, + <0 0x0acb8000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbc000 0 0x1000>, + <0 0x0accb000 0 0x1000>, + <0 0x0acd0000 0 0x1000>, + <0 0x0ace4000 0 0x2000>, + <0 0x0ace6000 0 0x2000>, + <0 0x0ace8000 0 0x2000>, + <0 0x0acea000 0 0x2000>, + <0 0x0acec000 0 0x2000>, + <0 0x0acee000 0 0x2000>, + <0 0x0ac62000 0 0xf000>, + <0 0x0ac71000 0 0xf000>, + <0 0x0ac80000 0 0xf000>, + <0 0x0accc000 0 0x2000>, + <0 0x0acd1000 0 0x2000>; + reg-names = "csid_wrapper", + "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_2_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cpas_fast_ahb", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe2", + "cpas_vfe_lite", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "csiphy_rx", + "gcc_axi_hf", + "qdss_debug_xo", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe2", + "vfe2_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 + &mc_virt SLAVE_EBI1 0>; + interconnect-names = "ahb", "hf_mnoc"; + iommus = <&apps_smmu 0x800 0x20>, + <&apps_smmu 0x18a0 0x40>, + <&apps_smmu 0x1860 0x00>; + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", "ife1", "ife2", "top"; + vdd-csiphy01-0p9-supply = <&vreg_0p9>; + vdd-csiphy01-1p2-supply = <&vreg_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&camera_sensor>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml index b075341caafc..b87a13479a4b 100644 --- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml @@ -124,7 +124,7 @@ properties: vdd-csiphy-1p2-supply: description: - Phandle to 1.8V regulator supply to a PHY. + Phandle to 1.2V regulator supply to a PHY. ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml new file mode 100644 index 000000000000..c09cbd8c9e35 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,r9a09g057-ivc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Input Video Control Block + +maintainers: + - Daniel Scally <dan.scally@ideasonboard.com> + +description: + The IVC block is a module that takes video frames from memory and feeds them + to the Image Signal Processor for processing. + +properties: + compatible: + const: renesas,r9a09g057-ivc # RZ/V2H(P) + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Input Video Control block register access clock + - description: Video input data AXI bus clock + - description: ISP system clock + + clock-names: + items: + - const: reg + - const: axi + - const: isp + + power-domains: + maxItems: 1 + + resets: + items: + - description: Input Video Control block register access reset + - description: Video input data AXI bus reset + - description: ISP core reset + + reset-names: + items: + - const: reg + - const: axi + - const: isp + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output parallel video bus + + properties: + endpoint: + $ref: /schemas/graph.yaml#/properties/endpoint + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas,r9a09g057-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + isp-input@16040000 { + compatible = "renesas,r9a09g057-ivc"; + reg = <0x16040000 0x230>; + + clocks = <&cpg CPG_MOD 0xe3>, + <&cpg CPG_MOD 0xe4>, + <&cpg CPG_MOD 0xe5>; + clock-names = "reg", "axi", "isp"; + + power-domains = <&cpg>; + + resets = <&cpg 0xd4>, + <&cpg 0xd1>, + <&cpg 0xd3>; + reset-names = "reg", "axi", "isp"; + + interrupts = <GIC_SPI 861 IRQ_TYPE_EDGE_RISING>; + + port { + ivc_out: endpoint { + remote-endpoint = <&isp_in>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml new file mode 100644 index 000000000000..cc08ce94bef7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,px30-vip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Video Input Processor (VIP) + +maintainers: + - Mehdi Djait <mehdi.djait@linux.intel.com> + - Michael Riesch <michael.riesch@collabora.com> + +description: + The Rockchip PX30 Video Input Processor (VIP) receives the data from a camera + sensor or CCIR656 encoder and transfers it into system main memory by AXI bus. + +properties: + compatible: + const: rockchip,px30-vip + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ACLK + - description: HCLK + - description: PCLK + + clock-names: + items: + - const: aclk + - const: hclk + - const: pclk + + resets: + items: + - description: AXI + - description: AHB + - description: PCLK IN + + reset-names: + items: + - const: axi + - const: ahb + - const: pclkin + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: input port on the parallel interface + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: + - 5 # MEDIA_BUS_TYPE_PARALLEL + - 6 # MEDIA_BUS_TYPE_BT656 + + required: + - bus-type + + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/media/video-interfaces.h> + #include <dt-bindings/power/px30-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + video-capture@ff490000 { + compatible = "rockchip,px30-vip"; + reg = <0x0 0xff490000 0x0 0x200>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>; + clock-names = "aclk", "hclk", "pclk"; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>; + reset-names = "axi", "ahb", "pclkin"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + cif_in: endpoint { + remote-endpoint = <&tw9900_out>; + bus-type = <MEDIA_BUS_TYPE_BT656>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml new file mode 100644 index 000000000000..18cd0a5a5318 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,rk3568-vicap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3568 Video Capture (VICAP) + +maintainers: + - Michael Riesch <michael.riesch@collabora.com> + +description: + The Rockchip RK3568 Video Capture (VICAP) block features a digital video + port (DVP, a parallel video interface) and a MIPI CSI-2 port. It receives + the data from camera sensors, video decoders, or other companion ICs and + transfers it into system main memory by AXI bus. + +properties: + compatible: + const: rockchip,rk3568-vicap + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ACLK + - description: HCLK + - description: DCLK + - description: ICLK + + clock-names: + items: + - const: aclk + - const: hclk + - const: dclk + - const: iclk + + iommus: + maxItems: 1 + + resets: + items: + - description: ARST + - description: HRST + - description: DRST + - description: PRST + - description: IRST + + reset-names: + items: + - const: arst + - const: hrst + - const: drst + - const: prst + - const: irst + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to general register file used for video input block control. + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The digital video port (DVP, a parallel video interface). + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: + - 5 # MEDIA_BUS_TYPE_PARALLEL + - 6 # MEDIA_BUS_TYPE_BT656 + + rockchip,dvp-clk-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + minimum: 0 + maximum: 127 + description: + Delay the DVP path clock input to align the sampling phase, + only valid in dual edge sampling mode. Delay is zero by + default and can be adjusted optionally. + + required: + - bus-type + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Port connected to the MIPI CSI-2 receiver output. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/rk3568-power.h> + #include <dt-bindings/media/video-interfaces.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + vicap: video-capture@fdfe0000 { + compatible = "rockchip,rk3568-vicap"; + reg = <0x0 0xfdfe0000 0x0 0x200>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru DCLK_VICAP>; + assigned-clock-rates = <300000000>; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>, + <&cru DCLK_VICAP>, <&cru ICLK_VICAP_G>; + clock-names = "aclk", "hclk", "dclk", "iclk"; + iommus = <&vicap_mmu>; + power-domains = <&power RK3568_PD_VI>; + resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>, + <&cru SRST_D_VICAP>, <&cru SRST_P_VICAP>, + <&cru SRST_I_VICAP>; + reset-names = "arst", "hrst", "drst", "prst", "irst"; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + vicap_dvp: port@0 { + reg = <0>; + + vicap_dvp_input: endpoint { + bus-type = <MEDIA_BUS_TYPE_BT656>; + bus-width = <16>; + pclk-sample = <MEDIA_PCLK_SAMPLE_DUAL_EDGE>; + remote-endpoint = <&it6801_output>; + }; + }; + + vicap_mipi: port@1 { + reg = <1>; + + vicap_mipi_input: endpoint { + remote-endpoint = <&csi_output>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 96b6c8938768..809fda45b3bd 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -16,6 +16,7 @@ description: |- properties: compatible: oneOf: + - const: rockchip,rk3288-vdec - const: rockchip,rk3399-vdec - const: rockchip,rk3576-vdec - const: rockchip,rk3588-vdec diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml index 510e94e9ca3a..b7f6c87d0e06 100644 --- a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys DesignWare HDMI RX Controller maintainers: - - Shreeya Patel <shreeya.patel@collabora.com> + - Dmitry Osipenko <dmitry.osipenko@collabora.com> description: Synopsys DesignWare HDMI Input Controller preset on RK3588 SoCs diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt deleted file mode 100644 index 880d4d70c9fd..000000000000 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ /dev/null @@ -1,88 +0,0 @@ -STMicroelectronics STi c8sectpfe binding -============================================ - -This document describes the c8sectpfe device bindings that is used to get transport -stream data into the SoC on the TS pins, and into DDR for further processing. - -It is typically used in conjunction with one or more demodulator and tuner devices -which converts from the RF to digital domain. Demodulators and tuners are usually -located on an external DVB frontend card connected to SoC TS input pins. - -Currently 7 TS input (tsin) channels are supported on the stih407 family SoC. - -Required properties (controller (parent) node): -- compatible : Should be "stih407-c8sectpfe" - -- reg : Address and length of register sets for each device in - "reg-names" - -- reg-names : The names of the register addresses corresponding to the - registers filled in "reg": - - c8sectpfe: c8sectpfe registers - - c8sectpfe-ram: c8sectpfe internal sram - -- clocks : phandle list of c8sectpfe clocks -- clock-names : should be "c8sectpfe" -See: Documentation/devicetree/bindings/clock/clock-bindings.txt - -- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) - must be defined for each tsin child node. -- pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - -Required properties (tsin (child) node): - -- tsin-num : tsin id of the InputBlock (must be between 0 to 6) -- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected. -- reset-gpios : reset gpio for this tsin channel. - -Optional properties (tsin (child) node): - -- invert-ts-clk : Bool property to control sense of ts input clock (data stored on falling edge of clk). -- serial-not-parallel : Bool property to configure input bus width (serial on ts_data<7>). -- async-not-sync : Bool property to control if data is received in asynchronous mode - (all bits/bytes with ts_valid or ts_packet asserted are valid). - -- dvb-card : Describes the NIM card connected to this tsin channel. - -Example: - -/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - - c8sectpfe@8a20000 { - compatible = "st,stih407-c8sectpfe"; - reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; - reg-names = "stfe", "stfe-ram"; - interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>; - interrupt-names = "stfe-error-irq", "stfe-idle-irq"; - pinctrl-0 = <&pinctrl_tsin0_serial>; - pinctrl-1 = <&pinctrl_tsin0_parallel>; - pinctrl-2 = <&pinctrl_tsin3_serial>; - pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; - pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; - pinctrl-names = "tsin0-serial", - "tsin0-parallel", - "tsin3-serial", - "tsin4-serial", - "tsin5-serial"; - clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; - clock-names = "c8sectpfe"; - - /* tsin0 is TSA on NIMA */ - tsin0: port@0 { - tsin-num = <0>; - serial-not-parallel; - i2c-bus = <&ssc2>; - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; - dvb-card = <STV0367_TDA18212_NIMA_1>; - }; - - tsin3: port@3 { - tsin-num = <3>; - serial-not-parallel; - i2c-bus = <&ssc3>; - reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>; - dvb-card = <STV0367_TDA18212_NIMB_1>; - }; - }; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 038e85b45bef..6ed4695cacf7 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -95,7 +95,7 @@ properties: - 6 # BT.656 - 7 # DPI description: - Data bus type. + Data bus type. See include/dt-bindings/media/video-interfaces.h. bus-width: $ref: /schemas/types.yaml#/definitions/uint32 @@ -229,7 +229,7 @@ properties: Imaging. The length of the array must be the same length as the data-lanes property. If the line-orders property is omitted, the value shall be interpreted as 0 (ABC). This property is valid for CSI-2 C-PHY - busses only. + busses only. See include/dt-bindings/media/video-interfaces.h. strobe: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml index 6d22131ac2f9..fbe2ddcdd909 100644 --- a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - airoha,en7581-eth + - airoha,an7583-eth reg: items: @@ -44,6 +45,7 @@ properties: - description: PDMA irq resets: + minItems: 7 maxItems: 8 reset-names: @@ -54,8 +56,9 @@ properties: - const: xsi-mac - const: hsi0-mac - const: hsi1-mac - - const: hsi-mac + - enum: [ hsi-mac, xfp-mac ] - const: xfp-mac + minItems: 7 memory-region: items: @@ -81,6 +84,36 @@ properties: interface to implement hardware flow offloading programming Packet Processor Engine (PPE) flow table. +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - airoha,en7581-eth + then: + properties: + resets: + minItems: 8 + + reset-names: + minItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - airoha,an7583-eth + then: + properties: + resets: + maxItems: 7 + + reset-names: + maxItems: 7 + patternProperties: "^ethernet@[1-4]$": type: object diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml index c7644e6586d3..59c57f58116b 100644 --- a/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml +++ b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - airoha,en7581-npu + - airoha,an7583-npu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml new file mode 100644 index 000000000000..006add8b6410 --- /dev/null +++ b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/amd,xgbe-seattle-v1a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD XGBE Seattle v1a + +maintainers: + - Shyam Sundar S K <Shyam-sundar.S-k@amd.com> + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +properties: + compatible: + const: amd,xgbe-seattle-v1a + + reg: + items: + - description: MAC registers + - description: PCS registers + - description: SerDes Rx/Tx registers + - description: SerDes integration registers (1/2) + - description: SerDes integration registers (2/2) + + interrupts: + description: Device interrupts. The first entry is the general device + interrupt. If amd,per-channel-interrupt is specified, each DMA channel + interrupt must be specified. The last entry is the PCS auto-negotiation + interrupt. + minItems: 2 + maxItems: 6 + + clocks: + items: + - description: DMA clock for the device + - description: PTP clock for the device + + clock-names: + items: + - const: dma_clk + - const: ptp_clk + + iommus: + maxItems: 1 + + phy-mode: true + + dma-coherent: true + + amd,per-channel-interrupt: + description: Indicates that Rx and Tx complete will generate a unique + interrupt for each DMA channel. + type: boolean + + amd,speed-set: + description: > + Speed capabilities of the device. + 0 = 1GbE and 10GbE + 1 = 2.5GbE and 10GbE + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + amd,serdes-blwc: + description: Baseline wandering correction enablement for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + + amd,serdes-cdr-rate: + description: CDR rate speed selection for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CDR rate for 1GbE + - description: CDR rate for 2.5GbE + - description: CDR rate for 10GbE + + amd,serdes-pq-skew: + description: PQ data sampling skew for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: PQ skew for 1GbE + - description: PQ skew for 2.5GbE + - description: PQ skew for 10GbE + + amd,serdes-tx-amp: + description: TX amplitude boost for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: TX amplitude for 1GbE + - description: TX amplitude for 2.5GbE + - description: TX amplitude for 10GbE + + amd,serdes-dfe-tap-config: + description: DFE taps available to run for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: DFE taps available for 1GbE + - description: DFE taps available for 2.5GbE + - description: DFE taps available for 10GbE + + amd,serdes-dfe-tap-enable: + description: DFE taps to enable for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: DFE taps to enable for 1GbE + - description: DFE taps to enable for 2.5GbE + - description: DFE taps to enable for 10GbE + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phy-mode + +unevaluatedProperties: false + +examples: + - | + ethernet@e0700000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0xe0700000 0x80000>, + <0xe0780000 0x80000>, + <0xe1240800 0x00400>, + <0xe1250000 0x00060>, + <0xe1250080 0x00004>; + interrupts = <0 325 4>, + <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, + <0 323 4>; + amd,per-channel-interrupt; + clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + mac-address = [ 02 a1 a2 a3 a4 a5 ]; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <30>; + amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; + }; diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt deleted file mode 100644 index 9c27dfcd1133..000000000000 --- a/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ /dev/null @@ -1,76 +0,0 @@ -* AMD 10GbE driver (amd-xgbe) - -Required properties: -- compatible: Should be "amd,xgbe-seattle-v1a" -- reg: Address and length of the register sets for the device - - MAC registers - - PCS registers - - SerDes Rx/Tx registers - - SerDes integration registers (1/2) - - SerDes integration registers (2/2) -- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt - listed is required and is the general device interrupt. If the optional - amd,per-channel-interrupt property is specified, then one additional - interrupt for each DMA channel supported by the device should be specified. - The last interrupt listed should be the PCS auto-negotiation interrupt. -- clocks: - - DMA clock for the amd-xgbe device (used for calculating the - correct Rx interrupt watchdog timer value on a DMA channel - for coalescing) - - PTP clock for the amd-xgbe device -- clock-names: Should be the names of the clocks - - "dma_clk" for the DMA clock - - "ptp_clk" for the PTP clock -- phy-mode: See ethernet.txt file in the same directory - -Optional properties: -- dma-coherent: Present if dma operations are coherent -- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate - a unique interrupt for each DMA channel - this requires an additional - interrupt be configured for each DMA channel -- amd,speed-set: Speed capabilities of the device - 0 - 1GbE and 10GbE (default) - 1 - 2.5GbE and 10GbE - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -The following optional properties are represented by an array with each -value corresponding to a particular speed. The first array value represents -the setting for the 1GbE speed, the second value for the 2.5GbE speed and -the third value for the 10GbE speed. All three values are required if the -property is used. -- amd,serdes-blwc: Baseline wandering correction enablement - 0 - Off - 1 - On -- amd,serdes-cdr-rate: CDR rate speed selection -- amd,serdes-pq-skew: PQ (data sampling) skew -- amd,serdes-tx-amp: TX amplitude boost -- amd,serdes-dfe-tap-config: DFE taps available to run -- amd,serdes-dfe-tap-enable: DFE taps to enable - -Example: - xgbe@e0700000 { - compatible = "amd,xgbe-seattle-v1a"; - reg = <0 0xe0700000 0 0x80000>, - <0 0xe0780000 0 0x80000>, - <0 0xe1240800 0 0x00400>, - <0 0xe1250000 0 0x00060>, - <0 0xe1250080 0 0x00004>; - interrupt-parent = <&gic>; - interrupts = <0 325 4>, - <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, - <0 323 4>; - amd,per-channel-interrupt; - clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; - clock-names = "dma_clk", "ptp_clk"; - phy-mode = "xgmii"; - mac-address = [ 02 a1 a2 a3 a4 a5 ]; - amd,speed-set = <0>; - amd,serdes-blwc = <1>, <1>, <0>; - amd,serdes-cdr-rate = <2>, <2>, <7>; - amd,serdes-pq-skew = <10>, <10>, <30>; - amd,serdes-tx-amp = <15>, <15>, <10>; - amd,serdes-dfe-tap-config = <3>, <3>, <1>; - amd,serdes-dfe-tap-enable = <0>, <0>, <127>; - }; diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index d6ef468495c5..a105dc07ed12 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -19,7 +19,12 @@ allOf: properties: compatible: - const: aspeed,ast2600-mdio + oneOf: + - const: aspeed,ast2600-mdio + - items: + - enum: + - aspeed,ast2700-mdio + - const: aspeed,ast2600-mdio reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml new file mode 100644 index 000000000000..a307c64cfa4d --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/marvell,sd8897-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO) + +maintainers: + - Ariel D'Alessandro <ariel.dalessandro@collabora.com> + +allOf: + - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml# + +properties: + compatible: + enum: + - marvell,sd8897-bt + - marvell,sd8997-bt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + marvell,cal-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data downloaded to the device during initialization. + maxItems: 28 + + marvell,wakeup-pin: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host + system. + + marvell,wakeup-gap-ms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Wakeup latency of the host platform. Required by the chip sleep feature. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + mmc { + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + bluetooth@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + marvell,cal-data = /bits/ 8 < + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0xf0 0x00>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index f546b1f7dd6d..a68022a57c51 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -14,7 +14,7 @@ Required properties: Also, vendors that use btusb may have device additional properties, e.g: -Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml Optional properties: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 61ef60d8f1c7..2c9d37975bed 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -109,6 +109,26 @@ properties: maximum: 32 minItems: 1 + pinctrl-0: + description: Default pinctrl state + + pinctrl-1: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-2: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-names: + description: + When present should contain at least "default" describing the default pin + states. Other states are "sleep" which describes the pinstate when + sleeping and "wakeup" describing the pins if wakeup is enabled. + minItems: 1 + items: + - const: default + - enum: [ sleep, wakeup ] + - const: wakeup + power-domains: description: Power domain provider node and an args specifier containing @@ -125,6 +145,11 @@ properties: minItems: 1 maxItems: 2 + wakeup-source: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles to system idle states in which mcan can wakeup the system. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index c155c9c6db39..2d13638ebc6a 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -49,6 +49,11 @@ properties: Must be half or less of "clocks" frequency. maximum: 20000000 + gpio-controller: true + + "#gpio-cells": + const: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml index 1219c5cb601f..519a11fbe972 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -32,11 +32,15 @@ properties: - description: AHB peripheral clock - description: CAN bus clock + resets: + maxItems: 1 + required: - compatible - reg - interrupts - clocks + - resets additionalProperties: false @@ -46,6 +50,7 @@ examples: compatible = "microchip,mpfs-can"; reg = <0x2010c000 0x1000>; clocks = <&clkcfg 17>, <&clkcfg 37>; + resets = <&clkcfg 17>; interrupt-parent = <&plic>; interrupts = <56>; }; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 1029786a855c..cb14c35ba996 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -38,7 +38,10 @@ properties: - cdns,sam9x60-macb # Microchip sam9x60 SoC - microchip,mpfs-macb # Microchip PolarFire SoC - const: cdns,macb # Generic - + - items: + - const: microchip,pic64gx-macb # Microchip PIC64GX SoC + - const: microchip,mpfs-macb # Microchip PolarFire SoC + - const: cdns,macb # Generic - items: - enum: - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs @@ -47,18 +50,19 @@ properties: - const: cdns,macb # Generic - enum: - - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs + - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs + - cdns,emac # Generic + - cdns,gem # Generic + - cdns,macb # Generic - cdns,np4-macb # NP4 SoC devices - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + - mobileye,eyeq5-gem # Mobileye EyeQ5 SoCs - raspberrypi,rp1-gem # Raspberry Pi RP1 gigabit ethernet interface - sifive,fu540-c000-gem # SiFive FU540-C000 SoC - - cdns,emac # Generic - - cdns,gem # Generic - - cdns,macb # Generic - items: - enum: @@ -183,6 +187,15 @@ allOf: reg: maxItems: 1 + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-gem + then: + required: + - phys + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml index f3154b19af78..205b683849a5 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml @@ -4,10 +4,14 @@ $id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Lantiq GSWIP Ethernet switches +title: Lantiq GSWIP and MaxLinear GSW1xx Ethernet switches -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports +description: + Lantiq GSWIP and MaxLinear GSW1xx switches share the same hardware IP. + Lantiq switches are embedded in SoCs and accessed via memory-mapped I/O, + while MaxLinear switches are standalone ICs connected via MDIO. + +$ref: dsa.yaml# maintainers: - Hauke Mehrtens <hauke@hauke-m.de> @@ -18,9 +22,14 @@ properties: - lantiq,xrx200-gswip - lantiq,xrx300-gswip - lantiq,xrx330-gswip + - maxlinear,gsw120 + - maxlinear,gsw125 + - maxlinear,gsw140 + - maxlinear,gsw141 + - maxlinear,gsw145 reg: - minItems: 3 + minItems: 1 maxItems: 3 reg-names: @@ -37,9 +46,6 @@ properties: compatible: const: lantiq,xrx200-mdio - required: - - compatible - gphy-fw: type: object properties: @@ -91,10 +97,63 @@ properties: additionalProperties: false +patternProperties: + "^(ethernet-)?ports$": + type: object + patternProperties: + "^(ethernet-)?port@[0-6]$": + $ref: dsa-port.yaml# + unevaluatedProperties: false + + properties: + maxlinear,rmii-refclk-out: + type: boolean + description: + Configure the RMII reference clock to be a clock output + rather than an input. Only applicable for RMII mode. + tx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII TX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. + rx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII RX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. + required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - lantiq,xrx200-gswip + - lantiq,xrx300-gswip + - lantiq,xrx330-gswip + then: + properties: + reg: + minItems: 3 + maxItems: 3 + mdio: + required: + - compatible + else: + properties: + reg: + maxItems: 1 + reg-names: false + gphy-fw: false + unevaluatedProperties: false examples: @@ -113,8 +172,10 @@ examples: port@0 { reg = <0>; label = "lan3"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; }; port@1 { @@ -200,3 +261,90 @@ examples: }; }; }; + + - | + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "maxlinear,gsw125"; + reg = <0x1f>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&switchphy0>; + phy-mode = "internal"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switchphy1>; + phy-mode = "internal"; + }; + + port@4 { + reg = <4>; + label = "wan"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + }; + + port@5 { + reg = <5>; + phy-mode = "rgmii-id"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + ethernet = <ð0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + }; + }; + }; + + switchphy1: switchphy@1 { + reg = <1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml b/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml new file mode 100644 index 000000000000..33a6552e46fc --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/motorcomm,yt921x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorcomm YT921x Ethernet switch family + +maintainers: + - David Yang <mmyangfl@gmail.com> + +description: | + The Motorcomm YT921x series is a family of Ethernet switches with up to 8 + internal GbE PHYs and up to 2 GMACs, including: + + - YT9215S / YT9215RB / YT9215SC: 5 GbE PHYs (Port 0-4) + 2 GMACs (Port 8-9) + - YT9213NB: 2 GbE PHYs (Port 1/3) + 1 GMAC (Port 9) + - YT9214NB: 2 GbE PHYs (Port 1/3) + 2 GMACs (Port 8-9) + - YT9218N: 8 GbE PHYs (Port 0-7) + - YT9218MB: 8 GbE PHYs (Port 0-7) + 2 GMACs (Port 8-9) + + Any port can be used as the CPU port. + +properties: + compatible: + const: motorcomm,yt9215 + + reg: + enum: [0x0, 0x1d] + + reset-gpios: + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: + Internal MDIO bus for the internal GbE PHYs. PHY 0-7 are used for Port + 0-7 respectively. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: + External MDIO bus to access external components. External PHYs for GMACs + (Port 8-9) are expected to be connected to the external MDIO bus in + vendor's reference design, but that is not a hard limitation from the + chip. + +required: + - compatible + - reg + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1d { + compatible = "motorcomm,yt9215"; + /* default 0x1d, alternate 0x0 */ + reg = <0x1d>; + reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: phy@0 { + reg = <0x0>; + }; + + sw_phy1: phy@1 { + reg = <0x1>; + }; + + sw_phy2: phy@2 { + reg = <0x2>; + }; + + sw_phy3: phy@3 { + reg = <0x3>; + }; + + sw_phy4: phy@4 { + reg = <0x4>; + }; + }; + + mdio-external { + #address-cells = <1>; + #size-cells = <0>; + + phy1: phy@b { + reg = <0xb>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&sw_phy0>; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&sw_phy1>; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&sw_phy2>; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&sw_phy3>; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan5"; + phy-mode = "internal"; + phy-handle = <&sw_phy4>; + }; + + /* CPU port */ + ethernet-port@8 { + reg = <8>; + phy-mode = "2500base-x"; + ethernet = <ð0>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + /* if external phy is connected to a MAC */ + ethernet-port@9 { + reg = <9>; + label = "wan"; + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index e9dd914b0734..607b7fe8d28e 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -41,6 +41,9 @@ properties: therefore discouraged. maxItems: 1 + clocks: + maxItems: 1 + spi-cpha: true spi-cpol: true diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml new file mode 100644 index 000000000000..91e8cd1db67b --- /dev/null +++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Eswin EIC7700 SOC Eth Controller + +maintainers: + - Shuang Liang <liangshuang@eswincomputing.com> + - Zhi Li <lizhi2@eswincomputing.com> + - Shangjuan Wei <weishangjuan@eswincomputing.com> + +description: + Platform glue layer implementation for STMMAC Ethernet driver. + +select: + properties: + compatible: + contains: + enum: + - eswin,eic7700-qos-eth + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + items: + - const: eswin,eic7700-qos-eth + - const: snps,dwmac-5.20 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: AXI clock + - description: Configuration clock + - description: GMAC main clock + - description: Tx clock + + clock-names: + items: + - const: axi + - const: cfg + - const: stmmaceth + - const: tx + + resets: + maxItems: 1 + + reset-names: + items: + - const: stmmaceth + + rx-internal-delay-ps: + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400] + + tx-internal-delay-ps: + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400] + + eswin,hsp-sp-csr: + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to HSP(High-Speed Peripheral) device + - description: Offset of phy control register for internal + or external clock selection + - description: Offset of AXI clock controller Low-Power request + register + - description: Offset of register controlling TX/RX clock delay + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - phy-mode + - resets + - reset-names + - rx-internal-delay-ps + - tx-internal-delay-ps + - eswin,hsp-sp-csr + +unevaluatedProperties: false + +examples: + - | + ethernet@50400000 { + compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20"; + reg = <0x50400000 0x10000>; + clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>, + <&d0_clock 193>; + clock-names = "axi", "cfg", "stmmaceth", "tx"; + interrupt-parent = <&plic>; + interrupts = <61>; + interrupt-names = "macirq"; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + resets = <&reset 95>; + reset-names = "stmmaceth"; + rx-internal-delay-ps = <200>; + tx-internal-delay-ps = <200>; + eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>; + snps,axi-config = <&stmmac_axi_setup>; + snps,aal; + snps,fixed-burst; + snps,tso; + stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <2>; + snps,wr_osr_lmt = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 2ec2d9fda7e3..bb4c49fc5fd8 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -35,9 +35,13 @@ properties: description: PHYs that implement IEEE802.3 clause 45 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" description: - If the PHY reports an incorrect ID (or none at all) then the - compatible list may contain an entry with the correct PHY ID - in the above form. + PHYs contain identification registers. These will be read to + identify the PHY. If the PHY reports an incorrect ID, or the + PHY requires a specific initialization sequence (like a + particular order of clocks, resets, power supplies), in + order to be able to read the ID registers, then the + compatible list must contain an entry with the correct PHY + ID in the above form. The first group of digits is the 16 bit Phy Identifier 1 register, this is the chip vendor OUI bits 3:18. The second group of digits is the Phy Identifier 2 register, diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml index ca70f0050171..aac20ab72ace 100644 --- a/Documentation/devicetree/bindings/net/fsl,enetc.yaml +++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml @@ -27,6 +27,7 @@ properties: - const: fsl,enetc - enum: - pci1131,e101 + - pci1131,e110 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt deleted file mode 100644 index 957e5e5c2927..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based) ------- -The 8997 devices supports multiple interfaces. When used on SDIO interfaces, -the btmrvl driver is used and when used on USB interface, the btusb driver is -used. - -Required properties: - - - compatible : should be one of the following: - * "marvell,sd8897-bt" (for SDIO) - * "marvell,sd8997-bt" (for SDIO) - * "usb1286,204e" (for USB) - -Optional properties: - - - marvell,cal-data: Calibration data downloaded to the device during - initialization. This is an array of 28 values(u8). - This is only applicable to SDIO devices. - - - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. - firmware will use the pin to wakeup host system (u16). - - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host - platform. The value will be configured to firmware. This - is needed to work chip's sleep feature as expected (u16). - - interrupt-names: Used only for USB based devices (See below) - - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the - driver will use the first interrupt specified in the interrupt - array. For USB based devices, the driver will use the interrupt - named "wakeup" from the interrupt-names and interrupt arrays. - The driver will request an irq based on this interrupt number. - During system suspend, the irq will be enabled so that the - bluetooth chip can wakeup host platform under certain - conditions. During system resume, the irq will be disabled - to make sure unnecessary interrupt is not received. - -Example: - -IRQ pin 119 is used as system wakeup source interrupt. -wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host -using this device side pin and wakeup latency. - -Example for SDIO device follows (calibration data is also available in -below example). - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - btmrvl: bluetooth@2 { - compatible = "marvell,sd8897-bt"; - reg = <2>; - interrupt-parent = <&pio>; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - - marvell,cal-data = /bits/ 8 < - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0xf0 0x00>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; - -Example for USB device: - -&usb_host1_ohci { - #address-cells = <1>; - #size-cells = <0>; - - mvl_bt1: bt@1 { - compatible = "usb1286,204e"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupt-names = "wakeup"; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index b45f67f92e80..cc346946291a 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -112,7 +112,7 @@ properties: mediatek,wed: $ref: /schemas/types.yaml#/definitions/phandle-array - minItems: 2 + minItems: 1 maxItems: 2 items: maxItems: 1 @@ -249,6 +249,9 @@ allOf: minItems: 1 maxItems: 1 + mediatek,wed: + minItems: 2 + mediatek,wed-pcie: false else: properties: @@ -338,12 +341,13 @@ allOf: - const: netsys0 - const: netsys1 - mediatek,infracfg: false - mediatek,sgmiisys: minItems: 2 maxItems: 2 + mediatek,wed: + maxItems: 1 + - if: properties: compatible: @@ -385,6 +389,9 @@ allOf: minItems: 2 maxItems: 2 + mediatek,wed: + minItems: 2 + - if: properties: compatible: @@ -429,6 +436,19 @@ allOf: - const: xgp2 - const: xgp3 + mediatek,wed: + minItems: 2 + + - if: + properties: + compatible: + contains: + const: ralink,rt5350-eth + then: + properties: + mediatek,wed: + minItems: 2 + patternProperties: "^mac@[0-2]$": type: object diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index 5caa3779660d..5491d0775ede 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -180,9 +180,9 @@ allOf: then: properties: reg: - minItems: 2 + maxItems: 2 reg-names: - minItems: 2 + maxItems: 2 else: properties: reg: diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt deleted file mode 100644 index 0a3647fe331b..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Microsemi - vsc8531 Giga bit ethernet phy - -Optional properties: -- vsc8531,vddmac : The vddmac in mV. Allowed values is listed - in the first row of Table 1 (below). - This property is only used in combination - with the 'edge-slowdown' property. - Default value is 3300. -- vsc8531,edge-slowdown : % the edge should be slowed down relative to - the fastest possible edge time. - Edge rate sets the drive strength of the MAC - interface output signals. Changing the - drive strength will affect the edge rate of - the output signal. The goal of this setting - is to help reduce electrical emission (EMI) - by being able to reprogram drive strength - and in effect slow down the edge rate if - desired. - To adjust the edge-slowdown, the 'vddmac' - must be specified. Table 1 lists the - supported edge-slowdown values for a given - 'vddmac'. - Default value is 0%. - Ref: Table:1 - Edge rate change (below). -- vsc8531,led-[N]-mode : LED mode. Specify how the LED[N] should behave. - N depends on the number of LEDs supported by a - PHY. - Allowed values are defined in - "include/dt-bindings/net/mscc-phy-vsc8531.h". - Default values are VSC8531_LINK_1000_ACTIVITY (1), - VSC8531_LINK_100_ACTIVITY (2), - VSC8531_LINK_ACTIVITY (0) and - VSC8531_DUPLEX_COLLISION (8). -- load-save-gpios : GPIO used for the load/save operation of the PTP - hardware clock (PHC). - - -Table: 1 - Edge rate change -----------------------------------------------------------------| -| Edge Rate Change (VDDMAC) | -| | -| 3300 mV 2500 mV 1800 mV 1500 mV | -|---------------------------------------------------------------| -| 0% 0% 0% 0% | -| (Fastest) (recommended) (recommended) | -|---------------------------------------------------------------| -| 2% 3% 5% 6% | -|---------------------------------------------------------------| -| 4% 6% 9% 14% | -|---------------------------------------------------------------| -| 7% 10% 16% 21% | -|(recommended) (recommended) | -|---------------------------------------------------------------| -| 10% 14% 23% 29% | -|---------------------------------------------------------------| -| 17% 23% 35% 42% | -|---------------------------------------------------------------| -| 29% 37% 52% 58% | -|---------------------------------------------------------------| -| 53% 63% 76% 77% | -| (slowest) | -|---------------------------------------------------------------| - -Example: - - vsc8531_0: ethernet-phy@0 { - compatible = "ethernet-phy-id0007.0570"; - vsc8531,vddmac = <3300>; - vsc8531,edge-slowdown = <7>; - vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>; - vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>; - load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml new file mode 100644 index 000000000000..0afbd0ff126f --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc-phy-vsc8531.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi VSC8531 Gigabit Ethernet PHY + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The VSC8531 is a Gigabit Ethernet PHY with configurable MAC interface + drive strength and LED modes. + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id0007.0570 # VSC8531 + - ethernet-phy-id0007.0772 # VSC8541 + required: + - compatible + +properties: + compatible: + items: + - enum: + - ethernet-phy-id0007.0570 # VSC8531 + - ethernet-phy-id0007.0772 # VSC8541 + - const: ethernet-phy-ieee802.3-c22 + + vsc8531,vddmac: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The VDDMAC voltage in millivolts. This property is used in combination + with the edge-slowdown property to control the drive strength of the + MAC interface output signals. + enum: [3300, 2500, 1800, 1500] + default: 3300 + + vsc8531,edge-slowdown: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Percentage by which the edge rate should be slowed down relative to + the fastest possible edge time. This setting helps reduce electromagnetic + interference (EMI) by adjusting the drive strength of the MAC interface + output signals. Valid values depend on the vddmac voltage setting + according to the edge rate change table in the datasheet. + + - When vsc8531,vddmac = 3300 mV: allowed values are 0, 2, 4, 7, 10, 17, 29, and 53. + (Recommended: 7) + - When vsc8531,vddmac = 2500 mV: allowed values are 0, 3, 6, 10, 14, 23, 37, and 63. + (Recommended: 10) + - When vsc8531,vddmac = 1800 mV: allowed values are 0, 5, 9, 16, 23, 35, 52, and 76. + (Recommended: 0) + - When vsc8531,vddmac = 1500 mV: allowed values are 0, 6, 14, 21, 29, 42, 58, and 77. + (Recommended: 0) + enum: [0, 2, 3, 4, 5, 6, 7, 9, 10, 14, 16, 17, 21, 23, 29, 35, 37, 42, 52, 53, 58, 63, 76, 77] + default: 0 + + vsc8531,led-0-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[0] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 1 + + vsc8531,led-1-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[1] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 2 + + vsc8531,led-2-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[2] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 0 + + vsc8531,led-3-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[3] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 8 + + load-save-gpios: + description: GPIO phandle used for the load/save operation of the PTP hardware + clock (PHC). + maxItems: 1 + +dependencies: + vsc8531,edge-slowdown: + - vsc8531,vddmac + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/net/mscc-phy-vsc8531.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + vsc8531,vddmac = <3300>; + vsc8531,edge-slowdown = <7>; + vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml index 97389fd5dbbf..deea4fd73d76 100644 --- a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml +++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml @@ -21,6 +21,7 @@ maintainers: properties: compatible: enum: + - nxp,imx94-netc-blk-ctrl - nxp,imx95-netc-blk-ctrl reg: diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml index bb1ee3398655..0b3803f647b7 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - ti,tps23881 + - ti,tps23881b reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index e7ee0d9efed8..423959cb928d 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -73,6 +73,14 @@ properties: dma-coherent: true + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-mac + - const: mac-mem + phys: true phy-names: diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 0ac7c4b47d6b..d17112527dab 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -24,6 +24,7 @@ select: - rockchip,rk3366-gmac - rockchip,rk3368-gmac - rockchip,rk3399-gmac + - rockchip,rk3506-gmac - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac @@ -50,6 +51,7 @@ properties: - rockchip,rv1108-gmac - items: - enum: + - rockchip,rk3506-gmac - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac @@ -148,6 +150,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3506-gmac - rockchip,rk3528-gmac then: properties: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 658c004e6a5c..dd3c72e8363e 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -86,10 +86,14 @@ properties: - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rk3506-gmac + - rockchip,rk3528-gmac + - rockchip,rk3568-gmac - rockchip,rk3576-gmac - rockchip,rk3588-gmac - - rockchip,rk3399-gmac - rockchip,rv1108-gmac + - rockchip,rv1126-gmac - snps,dwmac - snps,dwmac-3.40a - snps,dwmac-3.50a diff --git a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml index ce21979a2d9a..e8d3814db0e9 100644 --- a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml @@ -70,6 +70,25 @@ required: allOf: - $ref: snps,dwmac.yaml# + - if: + properties: + compatible: + contains: + const: sophgo,sg2042-dwmac + then: + properties: + phy-mode: + enum: + - rgmii-rxid + - rgmii-id + else: + properties: + phy-mode: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index eabceb849537..ae6b97cdc44b 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -151,6 +151,12 @@ properties: - ETSI - JP + country: + $ref: /schemas/types.yaml#/definitions/string + pattern: '^[A-Z]{2}$' + description: + ISO 3166-1 alpha-2 country code for power limits + patternProperties: "^txpower-[256]g$": type: object @@ -210,6 +216,66 @@ properties: minItems: 13 maxItems: 13 + paths-cck: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm-bf: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values for beamforming + (1 - 4 antennas, single spacial stream) + + paths-ru: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff values for 802.11ax rates for + 1T1ss (aka 1 transmitting antenna with 1 spacial stream), + 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, 4T3ss + and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + + paths-ru-bf: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff (beamforming) values for 802.11ax + rates for 1T1ss (aka 1 transmitting antenna with 1 spacial + stream), 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, + 4T3ss and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + txs-delta: $ref: /schemas/types.yaml#/definitions/uint32-array description: diff --git a/Documentation/devicetree/bindings/npu/arm,ethos.yaml b/Documentation/devicetree/bindings/npu/arm,ethos.yaml new file mode 100644 index 000000000000..716c4997f976 --- /dev/null +++ b/Documentation/devicetree/bindings/npu/arm,ethos.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/npu/arm,ethos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ethos U65/U85 + +maintainers: + - Rob Herring <robh@kernel.org> + +description: > + The Arm Ethos-U NPUs are designed for IoT inference applications. The NPUs + can accelerate 8-bit and 16-bit integer quantized networks: + + Transformer networks (U85 only) + Convolutional Neural Networks (CNN) + Recurrent Neural Networks (RNN) + + Further documentation is available here: + + U65 TRM: https://developer.arm.com/documentation/102023/ + U85 TRM: https://developer.arm.com/documentation/102685/ + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx93-npu + - const: arm,ethos-u65 + - items: + - {} + - const: arm,ethos-u85 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: apb + + power-domains: + maxItems: 1 + + sram: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx93-clock.h> + + npu@4a900000 { + compatible = "fsl,imx93-npu", "arm,ethos-u65"; + reg = <0x4a900000 0x1000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mlmix>; + clocks = <&clk IMX93_CLK_ML>, <&clk IMX93_CLK_ML_APB>; + clock-names = "core", "apb"; + sram = <&sram>; + }; +... diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index d2e578d6b83b..103e4aec2439 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - fsl,imx8-ddr-pmu + - fsl,imx8dxl-db-pmu - fsl,imx8m-ddr-pmu - fsl,imx8mq-ddr-pmu - fsl,imx8mm-ddr-pmu @@ -28,7 +29,10 @@ properties: - fsl,imx8mp-ddr-pmu - const: fsl,imx8m-ddr-pmu - items: - - const: fsl,imx8dxl-ddr-pmu + - enum: + - fsl,imx8dxl-ddr-pmu + - fsl,imx8qm-ddr-pmu + - fsl,imx8qxp-ddr-pmu - const: fsl,imx8-ddr-pmu - items: - enum: @@ -43,6 +47,14 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: cnt + required: - compatible - reg @@ -50,6 +62,21 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8dxl-db-pmu + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index 6a47e08e0e97..f9cffbb2df07 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -142,7 +142,9 @@ allOf: required: - orientation-switch then: - $ref: /schemas/usb/usb-switch.yaml# + allOf: + - $ref: /schemas/usb/usb-switch.yaml# + - $ref: /schemas/usb/usb-switch-ports.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index a58370a6a5d3..fba7b2549dde 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -24,6 +24,10 @@ properties: - enum: - qcom,qcs8300-qmp-ufs-phy - const: qcom,sa8775p-qmp-ufs-phy + - items: + - enum: + - qcom,kaanapali-qmp-ufs-phy + - const: qcom,sm8750-qmp-ufs-phy - enum: - qcom,msm8996-qmp-ufs-phy - qcom,msm8998-qmp-ufs-phy diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index e906403208c0..ea1135c91fb7 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -125,7 +125,9 @@ allOf: contains: const: google,gs101-usb31drd-phy then: - $ref: /schemas/usb/usb-switch.yaml# + allOf: + - $ref: /schemas/usb/usb-switch.yaml# + - $ref: /schemas/usb/usb-switch-ports.yaml# properties: clocks: diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index 19d47fd414bc..ce04d2eadec9 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -50,18 +50,20 @@ patternProperties: groups: description: Name of the pin group to use for the functions. - $ref: /schemas/types.yaml#/definitions/string - enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, - uart0_grp, uart1_grp, uart2_grp, uart3_grp, - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + items: + enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, + uart0_grp, uart1_grp, uart2_grp, uart3_grp, + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + minItems: 1 + maxItems: 8 drive-strength: enum: [2, 4, 6, 8, 16, 24, 32] diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml index 55ece6a8be5e..81e2164ea98f 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml @@ -74,6 +74,7 @@ patternProperties: '^conf': type: object + unevaluatedProperties: false description: Pinctrl node's client devices use subnodes for pin configurations, which in turn use the standard properties below. diff --git a/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml new file mode 100644 index 000000000000..855aec59ac53 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/thead,th1520-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 PWM controller + +maintainers: + - Michal Wilczynski <m.wilczynski@samsung.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: thead,th1520-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM clock + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/thead,th1520-clk-ap.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + pwm@ffec01c000 { + compatible = "thead,th1520-pwm"; + reg = <0xff 0xec01c000 0x0 0x4000>; + clocks = <&clk CLK_PWM>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt deleted file mode 100644 index c6d1003befb7..000000000000 --- a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Microchip PIC32 Random Number Generator - -The PIC32 RNG provides a pseudo random number generator which can be seeded by -another true random number generator. - -Required properties: -- compatible : should be "microchip,pic32mzda-rng" -- reg : Specifies base physical address and size of the registers. -- clocks: clock phandle. - -Example: - - rng: rng@1f8e6000 { - compatible = "microchip,pic32mzda-rng"; - reg = <0x1f8e6000 0x1000>; - clocks = <&PBCLK5>; - }; diff --git a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml new file mode 100644 index 000000000000..1f6f6fb81ddc --- /dev/null +++ b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/microchip,pic32-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC32 Random Number Generator + +description: | + The PIC32 RNG provides a pseudo random number generator which can be seeded + by another true random number generator. + +maintainers: + - Joshua Henderson <joshua.henderson@microchip.com> + +properties: + compatible: + enum: + - microchip,pic32mzda-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + rng: rng@1f8e6000 { + compatible = "microchip,pic32mzda-rng"; + reg = <0x1f8e6000 0x1000>; + clocks = <&PBCLK5>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index e925cd4c3ac8..72483bc3274d 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -197,6 +197,7 @@ allOf: - renesas,rcar-gen2-scif - renesas,rcar-gen3-scif - renesas,rcar-gen4-scif + - renesas,rcar-gen5-scif then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml deleted file mode 100644 index c388cda56011..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml +++ /dev/null @@ -1,60 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,max98363.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices MAX98363 SoundWire Amplifier - -maintainers: - - Ryan Lee <ryans.lee@analog.com> - -description: - The MAX98363 is a SoundWire input Class D mono amplifier that - supports MIPI SoundWire v1.2-compatible digital interface for - audio and control data. - SoundWire peripheral device ID of MAX98363 is 0x3*019f836300 - where * is the peripheral device unique ID decoded from pin. - It supports up to 10 peripheral devices(0x0 to 0x9). - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: sdw3019f836300 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - "#sound-dai-cells" - -unevaluatedProperties: false - -examples: - - | - soundwire@3250000 { - #address-cells = <2>; - #size-cells = <0>; - reg = <0x3250000 0x2000>; - - speaker@0,0 { - compatible = "sdw3019f836300"; - reg = <0 0>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Left"; - }; - - speaker@0,1 { - compatible = "sdw3019f836300"; - reg = <0 1>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Right"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt deleted file mode 100644 index 3b3302fe399b..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt +++ /dev/null @@ -1,19 +0,0 @@ -Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices - -SSM2602 support both I2C and SPI as the configuration interface, -the selection is made by the MODE strap-in pin. -SSM2603 and SSM2604 only support I2C as the configuration interface. - -Required properties: - - - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - Example: - - ssm2602: ssm2602@1a { - compatible = "adi,ssm2602"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml deleted file mode 100644 index 144450df5869..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices SSM3515 Audio Amplifier - -maintainers: - - Martin PoviÅ¡er <povik+lin@cutebit.org> - -description: | - SSM3515 is a mono Class-D audio amplifier with digital input. - - https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - adi,ssm3515 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@14 { - compatible = "adi,ssm3515"; - reg = <0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "Left Tweeter"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 739114fb6549..ae86cb5f0a74 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -33,7 +33,9 @@ properties: - const: allwinner,sun50i-h6-i2s - const: allwinner,sun50i-r329-i2s - items: - - const: allwinner,sun20i-d1-i2s + - enum: + - allwinner,sun20i-d1-i2s + - allwinner,sun55i-a523-i2s - const: allwinner,sun50i-r329-i2s reg: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index aa32dc950e72..1d089ba70f45 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -23,6 +23,7 @@ properties: - const: allwinner,sun8i-h3-spdif - const: allwinner,sun50i-h6-spdif - const: allwinner,sun50i-h616-spdif + - const: allwinner,sun55i-a523-spdif - items: - const: allwinner,sun8i-a83t-spdif - const: allwinner,sun8i-h3-spdif @@ -37,14 +38,12 @@ properties: maxItems: 1 clocks: - items: - - description: Bus Clock - - description: Module Clock + minItems: 2 + maxItems: 3 clock-names: - items: - - const: apb - - const: spdif + minItems: 2 + maxItems: 3 # Even though it only applies to subschemas under the conditionals, # not listing them here will trigger a warning because of the @@ -65,6 +64,7 @@ allOf: - allwinner,sun8i-h3-spdif - allwinner,sun50i-h6-spdif - allwinner,sun50i-h616-spdif + - allwinner,sun55i-a523-spdif then: required: @@ -98,6 +98,38 @@ allOf: - const: rx - const: tx + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun55i-a523-spdif + + then: + properties: + clocks: + items: + - description: Bus Clock + - description: TX Clock + - description: RX Clock + + clock-names: + items: + - const: apb + - const: tx + - const: rx + else: + properties: + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: spdif + required: - "#sound-dai-cells" - compatible diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml index 68fbf5cc208f..d286eb169915 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml @@ -25,6 +25,16 @@ properties: reg: maxItems: 1 + clocks: + items: + - description: + Master clock connected to the MCLK pin if MCLK is an input (i.e. no + crystal used). + + clock-names: + items: + - const: mclk + spi-cpha: true spi-cpol: true diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml index 9582eb8eb418..7600fff0e3b7 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml @@ -15,10 +15,15 @@ description: allOf: - $ref: dai-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: enum: + - cirrus,cs4282 + - cirrus,cs4302 + - cirrus,cs4304 + - cirrus,cs4308 - cirrus,cs5302 - cirrus,cs5304 - cirrus,cs5308 @@ -26,6 +31,9 @@ properties: reg: maxItems: 1 + spi-max-frequency: + maximum: 24000000 + '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt deleted file mode 100644 index 380fff8e4e83..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4265.txt +++ /dev/null @@ -1,29 +0,0 @@ -CS4265 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "cirrus,cs4265" - - - reg : the I2C address of the device for I2C. The I2C address depends on - the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. - If it is low, the i2c address is 0x4e. - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Examples: - -codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ - compatible = "cirrus,cs4265"; - reg = <0x4f>; -}; - - -codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ - compatible = "cirrus,cs4265"; - reg = <0x4e>; -}; diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt deleted file mode 100644 index c1d5c8ad1a36..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4341.txt +++ /dev/null @@ -1,22 +0,0 @@ -Cirrus Logic CS4341 audio DAC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - compatible: "cirrus,cs4341a" - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -For required properties on I2C-bus, please consult -dtschema schemas/i2c/i2c-controller.yaml -For required properties on SPI-bus, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - codec: cs4341@0 { - #sound-dai-cells = <0>; - compatible = "cirrus,cs4341a"; - reg = <0>; - spi-max-frequency = <6000000>; - }; diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt deleted file mode 100644 index 54c117b59dba..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4349.txt +++ /dev/null @@ -1,19 +0,0 @@ -CS4349 audio CODEC - -Required properties: - - - compatible : "cirrus,cs4349" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. - -Example: - -codec: cs4349@48 { - compatible = "cirrus,cs4349"; - reg = <0x48>; - reset-gpios = <&gpio 54 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt deleted file mode 100644 index 75c6338b6ae2..000000000000 --- a/Documentation/devicetree/bindings/sound/da9055.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Dialog DA9055 Audio CODEC - -DA9055 provides Audio CODEC support (I2C only). - -The Audio CODEC device in DA9055 has its own I2C address which is configurable, -so the device is instantiated separately from the PMIC (MFD) device. - -For details on accompanying PMIC I2C device, see the following: -Documentation/devicetree/bindings/mfd/da9055.txt - -Required properties: - - - compatible: "dlg,da9055-codec" - - reg: Specifies the I2C slave address - - -Example: - - codec: da9055-codec@1a { - compatible = "dlg,da9055-codec"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml index 92aa47ec72c7..88eb20bb008f 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml @@ -79,6 +79,7 @@ properties: - fsl,imx-audio-nau8822 - fsl,imx-audio-sgtl5000 - fsl,imx-audio-si476x + - fsl,imx-audio-tlv320 - fsl,imx-audio-tlv320aic31xx - fsl,imx-audio-tlv320aic32x4 - fsl,imx-audio-wm8524 diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml new file mode 100644 index 000000000000..9c9f21652af9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Audio Front End PCM controller for MT8189 + +maintainers: + - Darren Ye <darren.ye@mediatek.com> + - Cyril Chao <cyril.chao@mediatek.com> + +properties: + compatible: + const: mediatek,mt8189-afe-pcm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + mediatek,apmixedsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: To set up the apll12 tuner + + power-domains: + maxItems: 1 + + clocks: + items: + - description: mux for audio intbus + - description: mux for audio engen1 + - description: mux for audio engen2 + - description: mux for audio h + - description: audio apll1 clock + - description: audio apll2 clock + - description: audio apll1 divide4 + - description: audio apll2 divide4 + - description: audio apll12 divide for i2sin0 + - description: audio apll12 divide for i2sin1 + - description: audio apll12 divide for i2sout0 + - description: audio apll12 divide for i2sout1 + - description: audio apll12 divide for fmi2s + - description: audio apll12 divide for tdmout mck + - description: audio apll12 divide for tdmout bck + - description: mux for audio apll1 + - description: mux for audio apll2 + - description: mux for i2sin0 mck + - description: mux for i2sin1 mck + - description: mux for i2sout0 mck + - description: mux for i2sout1 mck + - description: mux for fmi2s mck + - description: mux for tdmout mck + - description: 26m clock + - description: audio slv clock + - description: audio mst clock + - description: audio intbus clock + + clock-names: + items: + - const: top_aud_intbus + - const: top_aud_eng1 + - const: top_aud_eng2 + - const: top_aud_h + - const: apll1 + - const: apll2 + - const: apll1_d4 + - const: apll2_d4 + - const: apll12_div_i2sin0 + - const: apll12_div_i2sin1 + - const: apll12_div_i2sout0 + - const: apll12_div_i2sout1 + - const: apll12_div_fmi2s + - const: apll12_div_tdmout_m + - const: apll12_div_tdmout_b + - const: top_apll1 + - const: top_apll2 + - const: top_i2sin0 + - const: top_i2sin1 + - const: top_i2sout0 + - const: top_i2sout1 + - const: top_fmi2s + - const: top_dptx + - const: clk26m + - const: aud_slv_ck_peri + - const: aud_mst_ck_peri + - const: aud_intbus_ck_peri + +required: + - compatible + - reg + - interrupts + - memory-region + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + afe@11050000 { + compatible = "mediatek,mt8189-afe-pcm"; + reg = <0 0x11050000 0 0x10000>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + memory-region = <&afe_dma_mem_reserved>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + power-domains = <&scpsys 1>; //MT8189_POWER_DOMAIN_AUDIO + clocks = <&topckgen_clk 23>, //CLK_TOP_AUD_INTBUS_SEL + <&topckgen_clk 39>, //CLK_TOP_AUD_ENGEN1_SEL + <&topckgen_clk 40>, //CLK_TOP_AUD_ENGEN2_SEL + <&topckgen_clk 49>, //CLK_TOP_AUDIO_H_SEL + <&topckgen_clk 146>, //CLK_TOP_APLL1 + <&topckgen_clk 151>, //CLK_TOP_APLL2 + <&topckgen_clk 148>, //CLK_TOP_APLL1_D4 + <&topckgen_clk 153>, //CLK_TOP_APLL2_D4 + <&topckgen_clk 93>, //CLK_TOP_APLL12_CK_DIV_I2SIN0 + <&topckgen_clk 94>, //CLK_TOP_APLL12_CK_DIV_I2SIN1 + <&topckgen_clk 95>, //CLK_TOP_APLL12_CK_DIV_I2SOUT0 + <&topckgen_clk 96>, //CLK_TOP_APLL12_CK_DIV_I2SOUT1 + <&topckgen_clk 97>, //CLK_TOP_APLL12_CK_DIV_FMI2S + <&topckgen_clk 98>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M + <&topckgen_clk 99>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_B + <&topckgen_clk 44>, //CLK_TOP_AUD_1_SEL + <&topckgen_clk 45>, //CLK_TOP_AUD_2_SEL + <&topckgen_clk 78>, //CLK_TOP_APLL_I2SIN0_MCK_SEL + <&topckgen_clk 79>, //CLK_TOP_APLL_I2SIN1_MCK_SEL + <&topckgen_clk 84>, //CLK_TOP_APLL_I2SOUT0_MCK_SEL + <&topckgen_clk 85>, //CLK_TOP_APLL_I2SOUT1_MCK_SEL + <&topckgen_clk 90>, //CLK_TOP_APLL_FMI2S_MCK_SEL + <&topckgen_clk 91>, //CLK_TOP_APLL_TDMOUT_MCK_SEL + <&topckgen_clk 191>, //CLK_TOP_TCK_26M_MX9 + <&pericfg_ao_clk 77>, //CLK_PERAO_AUDIO0 + <&pericfg_ao_clk 78>, //CLK_PERAO_AUDIO1 + <&pericfg_ao_clk 79>; //CLK_PERAO_AUDIO2 + clock-names = "top_aud_intbus", + "top_aud_eng1", + "top_aud_eng2", + "top_aud_h", + "apll1", + "apll2", + "apll1_d4", + "apll2_d4", + "apll12_div_i2sin0", + "apll12_div_i2sin1", + "apll12_div_i2sout0", + "apll12_div_i2sout1", + "apll12_div_fmi2s", + "apll12_div_tdmout_m", + "apll12_div_tdmout_b", + "top_apll1", + "top_apll2", + "top_i2sin0", + "top_i2sin1", + "top_i2sout0", + "top_i2sout1", + "top_fmi2s", + "top_dptx", + "clk26m", + "aud_slv_ck_peri", + "aud_mst_ck_peri", + "aud_intbus_ck_peri"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml new file mode 100644 index 000000000000..dd9ee0a3b292 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-nau8825.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8189 ASoC sound card + +maintainers: + - Darren Ye <darren.ye@mediatek.com> + - Cyril Chao <cyril.chao@mediatek.com> + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + enum: + - mediatek,mt8189-nau8825 + - mediatek,mt8189-rt5650 + - mediatek,mt8189-rt5682s + - mediatek,mt8189-rt5682i + - mediatek,mt8189-es8326 + + mediatek,platform: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8189 ASoC platform. + +patternProperties: + "^dai-link-[0-9]+$": + type: object + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: + This property corresponds to the name of the BE dai-link to which + we are going to update parameters in this node. + enum: + - TDM_DPTX_BE + - I2SOUT0_BE + - I2SIN0_BE + - I2SOUT1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format. + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: + - cpu + - codec + + additionalProperties: false + + required: + - link-name + +required: + - compatible + - mediatek,platform + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "mediatek,mt8189-nau8825"; + model = "mt8189_rt9123_8825"; + mediatek,platform = <&afe>; + dai-link-0 { + link-name = "I2SOUT1_BE"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&nau8825>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml deleted file mode 100644 index 7ccfbb8d8b04..000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Nuvoton Technology Corporation NAU85L40 Audio CODEC - -maintainers: - - John Hsu <KCHSU0@nuvoton.com> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nuvoton,nau8540 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1c { - compatible = "nuvoton,nau8540"; - reg = <0x1c>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml deleted file mode 100644 index d9696f6c75ed..000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NAU8810/NAU8812/NAU8814 audio CODEC - -maintainers: - - David Lin <CTLIN0@nuvoton.com> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - nuvoton,nau8810 - - nuvoton,nau8812 - - nuvoton,nau8814 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - #sound-dai-cells = <0>; - compatible = "nuvoton,nau8810"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index b32f33214ba6..2ce4049f94ac 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -67,46 +67,72 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -if: - properties: - compatible: - contains: - const: nvidia,tegra210-admaif - -then: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 20 - dma-names: - items: - pattern: "^[rt]x(10|[1-9])$" - description: - Should be "rx1", "rx2" ... "rx10" for DMA Rx channel - Should be "tx1", "tx2" ... "tx10" for DMA Tx channel - minItems: 1 - maxItems: 20 - interconnects: false - interconnect-names: false - iommus: false - -else: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 40 - dma-names: - items: - pattern: "^[rt]x(1[0-9]|[1-9]|20)$" - description: - Should be "rx1", "rx2" ... "rx20" for DMA Rx channel - Should be "tx1", "tx2" ... "tx20" for DMA Tx channel - minItems: 1 - maxItems: 40 +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 20 + dma-names: + items: + pattern: "^[rt]x(10|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx10" for DMA Rx channel + Should be "tx1", "tx2" ... "tx10" for DMA Tx channel + minItems: 1 + maxItems: 20 + interconnects: false + interconnect-names: false + iommus: false + + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 40 + dma-names: + items: + pattern: "^[rt]x(1[0-9]|[1-9]|20)$" + description: + Should be "rx1", "rx2" ... "rx20" for DMA Rx channel + Should be "tx1", "tx2" ... "tx20" for DMA Tx channel + minItems: 1 + maxItems: 40 + + - if: + properties: + compatible: + contains: + const: nvidia,tegra264-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 64 + dma-names: + items: + pattern: "^[rt]x(3[0-2]|[1-2][0-9]|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx32" for DMA Rx channel + Should be "tx1", "tx2" ... "tx32" for DMA Tx channel + minItems: 1 + maxItems: 64 required: - compatible diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml deleted file mode 100644 index df26248573ad..000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,tfa9879.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP TFA9879 class-D audio amplifier - -maintainers: - - Peter Rosin <peda@axentia.se> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,tfa9879 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c1 { - #address-cells = <1>; - #size-cells = <0>; - amplifier@6c { - compatible = "nxp,tfa9879"; - reg = <0x6c>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml b/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml deleted file mode 100644 index 71c6a5a2f5bc..000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,uda1342.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP uda1342 audio CODECs - -maintainers: - - Binbin Zhou <zhoubinbin@loongson.cn> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,uda1342 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "nxp,uda1342"; - reg = <0x1a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt deleted file mode 100644 index 3c74ed220ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm1789.txt +++ /dev/null @@ -1,22 +0,0 @@ -Texas Instruments pcm1789 DT bindings - -PCM1789 is a simple audio codec that can be connected via -I2C or SPI. Currently, only I2C bus is supported. - -Required properties: - - - compatible: "ti,pcm1789" - -Required properties on I2C: - - - reg: the I2C address - - reset-gpios: GPIO to control the RESET pin - -Examples: - - audio-codec@4c { - compatible = "ti,pcm1789"; - reg = <0x4c>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt deleted file mode 100644 index 436c2b247693..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm179x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Texas Instruments pcm179x DT bindings - -This driver supports both the I2C and SPI bus. - -Required properties: - - - compatible: "ti,pcm1792a" - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: the I2C address - - -Examples: - - codec_spi: 1792a@0 { - compatible = "ti,pcm1792a"; - spi-max-frequency = <600000>; - }; - - codec_i2c: 1792a@4c { - compatible = "ti,pcm1792a"; - reg = <0x4c>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm186x.txt b/Documentation/devicetree/bindings/sound/pcm186x.txt deleted file mode 100644 index 1087f4855980..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm186x.txt +++ /dev/null @@ -1,42 +0,0 @@ -Texas Instruments PCM186x Universal Audio ADC - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "ti,pcm1862", - "ti,pcm1863", - "ti,pcm1864", - "ti,pcm1865" - - - reg : The I2C address of the device for I2C, the chip select - number for SPI. - - - avdd-supply: Analog core power supply (3.3v) - - dvdd-supply: Digital core power supply - - iovdd-supply: Digital IO power supply - See regulator/regulator.txt for more information - -CODEC input pins: - * VINL1 - * VINR1 - * VINL2 - * VINR2 - * VINL3 - * VINR3 - * VINL4 - * VINR4 - -The pins can be used in referring sound node's audio-routing property. - -Example: - - pcm186x: audio-codec@4a { - compatible = "ti,pcm1865"; - reg = <0x4a>; - - avdd-supply = <®_3v3_analog>; - dvdd-supply = <®_3v3>; - iovdd-supply = <®_1v8>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt deleted file mode 100644 index c63ab0b6ee19..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm5102a.txt +++ /dev/null @@ -1,13 +0,0 @@ -PCM5102a audio CODECs - -These devices does not use I2C or SPI. - -Required properties: - - - compatible : set as "ti,pcm5102a" - -Examples: - - pcm5102a: pcm5102a { - compatible = "ti,pcm5102a"; - }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 92f95eb74b19..2eed2277511f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -14,12 +14,14 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-rx-macro + - qcom,sm6115-lpass-rx-macro - qcom,sm8250-lpass-rx-macro - qcom,sm8450-lpass-rx-macro - qcom,sm8550-lpass-rx-macro - qcom,sc8280xp-lpass-rx-macro - items: - enum: + - qcom,kaanapali-lpass-rx-macro - qcom,sm8650-lpass-rx-macro - qcom,sm8750-lpass-rx-macro - qcom,x1e80100-lpass-rx-macro @@ -84,6 +86,23 @@ allOf: properties: compatible: enum: + - qcom,sm6115-lpass-rx-macro + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: mclk + - const: npl + - const: dcodec + - const: fsgen + + - if: + properties: + compatible: + enum: - qcom,sc8280xp-lpass-rx-macro - qcom,sm8250-lpass-rx-macro - qcom,sm8450-lpass-rx-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 914798a89878..e5e65e226a02 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -21,6 +21,7 @@ properties: - qcom,sc8280xp-lpass-tx-macro - items: - enum: + - qcom,kaanapali-lpass-tx-macro - qcom,sm8650-lpass-tx-macro - qcom,sm8750-lpass-tx-macro - qcom,x1e80100-lpass-tx-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 1c0d78af3c05..5c42b2b323ee 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-va-macro + - qcom,sm6115-lpass-va-macro - qcom,sm8250-lpass-va-macro - qcom,sm8450-lpass-va-macro - qcom,sm8550-lpass-va-macro @@ -21,6 +22,7 @@ properties: - items: - enum: - qcom,glymur-lpass-va-macro + - qcom,kaanapali-lpass-va-macro - qcom,sm8650-lpass-va-macro - qcom,sm8750-lpass-va-macro - qcom,x1e80100-lpass-va-macro @@ -41,11 +43,7 @@ properties: clock-names: minItems: 1 - items: - - const: mclk - - const: macro - - const: dcodec - - const: npl + maxItems: 4 clock-output-names: maxItems: 1 @@ -90,29 +88,48 @@ allOf: clocks: maxItems: 1 clock-names: - maxItems: 1 + items: + - const: mclk else: properties: clocks: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 - + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: compatible: contains: - const: qcom,sm8250-lpass-va-macro + const: qcom,sm6115-lpass-va-macro then: properties: clocks: minItems: 3 maxItems: 3 clock-names: + items: + - const: mclk + - const: dcodec + - const: npl + - if: + properties: + compatible: + contains: + const: qcom,sm8250-lpass-va-macro + then: + properties: + clocks: minItems: 3 maxItems: 3 + clock-names: + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: @@ -127,8 +144,11 @@ allOf: minItems: 4 maxItems: 4 clock-names: - minItems: 4 - maxItems: 4 + items: + - const: mclk + - const: macro + - const: dcodec + - const: npl - if: properties: @@ -142,8 +162,10 @@ allOf: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 + items: + - const: mclk + - const: macro + - const: dcodec unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index b6f5ba5d1320..d5f22b5cf021 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,glymur-lpass-wsa-macro + - qcom,kaanapali-lpass-wsa-macro - qcom,sm8650-lpass-wsa-macro - qcom,sm8750-lpass-wsa-macro - qcom,x1e80100-lpass-wsa-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,pm4125-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,pm4125-sdw.yaml index 23624f32ac30..769e4cb5b99b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,pm4125-sdw.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,pm4125-sdw.yaml @@ -32,7 +32,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 - maxItems: 2 + maxItems: 4 items: enum: [1, 2, 3, 4] @@ -48,7 +48,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 - maxItems: 2 + maxItems: 5 items: enum: [1, 2, 3, 4, 5] diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 8ac91625dce5..15f38622b98b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -23,6 +23,7 @@ properties: - const: qcom,sdm845-sndcard - items: - enum: + - qcom,kaanapali-sndcard - qcom,sm8550-sndcard - qcom,sm8650-sndcard - qcom,sm8750-sndcard @@ -33,10 +34,12 @@ properties: - qcom,apq8096-sndcard - qcom,glymur-sndcard - qcom,qcm6490-idp-sndcard + - qcom,qcs615-sndcard - qcom,qcs6490-rb3gen2-sndcard - qcom,qcs8275-sndcard - qcom,qcs9075-sndcard - qcom,qcs9100-sndcard + - qcom,qrb2210-sndcard - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a65b1d1d5fdd..3a7334e41fd6 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -132,7 +132,7 @@ properties: $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml# patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object additionalProperties: true description: | diff --git a/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml new file mode 100644 index 000000000000..55bd0b307d22 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/spacemit,k1-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: K1 I2S controller + +description: + The I2S bus (Inter-IC sound bus) is a serial link for digital + audio data transfer between devices in the system. + +maintainers: + - Troy Mitchell <troy.mitchell@linux.spacemit.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: spacemit,k1-i2s + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for I2S sysclk + - description: clock for I2S bclk + - description: clock for I2S bus + - description: clock for I2S controller + + clock-names: + items: + - const: sysclk + - const: bclk + - const: bus + - const: func + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: tx + - const: rx + + resets: + maxItems: 1 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - dmas + - dma-names + - resets + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/spacemit,k1-syscon.h> + i2s@d4026000 { + compatible = "spacemit,k1-i2s"; + reg = <0xd4026000 0x30>; + clocks = <&syscon_mpmu CLK_I2S_SYSCLK>, + <&syscon_mpmu CLK_I2S_BCLK>, + <&syscon_apbc CLK_SSPA0_BUS>, + <&syscon_apbc CLK_SSPA0>; + clock-names = "sysclk", "bclk", "bus", "func"; + dmas = <&pdma0 21>, <&pdma0 22>; + dma-names = "tx", "rx"; + resets = <&syscon_apbc RESET_SSPA0>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml new file mode 100644 index 000000000000..0f0e254a2420 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm1862.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM186x Universal Audio ADC + +maintainers: + - Ranganath V N <vnranganath.20@gmail.com> + +description: | + The Texas Instruments PCM186x family are multi-channel audio ADCs + that support both I2C and SPI control interfaces, selected by + pin strapping. These devices include on-chip programmable gain + amplifiers and support differential or single-ended analog inputs. + + CODEC input pins: + * VINL1 + * VINR1 + * VINL2 + * VINR2 + * VINL3 + * VINR3 + * VINL4 + * VINR4 + + The pins can be used in referring sound node's audio-routing property. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,pcm1862 + - ti,pcm1863 + - ti,pcm1864 + - ti,pcm1865 + + reg: + maxItems: 1 + + avdd-supply: true + + dvdd-supply: true + + iovdd-supply: true + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - iovdd-supply + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@4a { + compatible = "ti,pcm1865"; + reg = <0x4a>; + + avdd-supply = <®_3v3_analog>; + dvdd-supply = <®_3v3>; + iovdd-supply = <®_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index bd00afa47d62..f3a5638f4239 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -24,19 +24,26 @@ description: | Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. - The TAS5825/TAS5827 is a stereo, digital input Class-D audio - amplifier optimized for efficiently driving high peak power into - small loudspeakers. An integrated on-chip DSP supports Texas - Instruments Smart Amp speaker protection algorithm. + The TAS5802/TAS5815/TAS5822/TAS5825/TAS5827/TAS5828 is a stereo, + digital input Class-D audio amplifier optimized for efficiently driving + high peak power into small loudspeakers. An integrated on-chip DSP + supports Texas Instruments Smart Amp speaker protection algorithm. Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2120 https://www.ti.com/lit/gpn/tas2320 https://www.ti.com/lit/gpn/tas2563 https://www.ti.com/lit/gpn/tas2572 + https://www.ti.com/lit/gpn/tas2574 https://www.ti.com/lit/gpn/tas2781 + https://www.ti.com/lit/gpn/tas5806m + https://www.ti.com/lit/gpn/tas5806md + https://www.ti.com/lit/gpn/tas5815 + https://www.ti.com/lit/gpn/tas5822m https://www.ti.com/lit/gpn/tas5825m https://www.ti.com/lit/gpn/tas5827 + https://www.ti.com/lit/gpn/tas5828m + https://www.ti.com/lit/gpn/tas5830 properties: compatible: @@ -55,21 +62,51 @@ properties: ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. + ti,tas2568: 5.3-W Digital Input Smart Amp with I/V Sense and Integrated + 10.75-V Class-H Boost + ti,tas2570: 5.8-W Digital Input smart amp with I/V sense and integrated 11-V Class-H Boost ti,tas2572: 6.6-W Digital Input smart amp with I/V sense and integrated 13-V Class-H Boost + ti,tas2574: 8.5-W Digital Input smart amp with I/V sense and integrated + 15-V Class-H Boost + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker Protection and Audio Processing, 16/20/24/32bit stereo I2S or multichannel TDM. + ti,tas5802: 22-W, Inductor-Less, Digital Input, Closed-Loop Class-D + Audio Amplifier with 96-Khz Extended Processing and Low Idle Power + Dissipation. + + ti,tas5806m: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and Low Power + Dissipation. + + ti,tas5806md: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and DirectPath(TM) + HP Driver + + ti,tas5815: 30-W, Digital Input, Stereo, Closed-loop Class-D Audio + Amplifier with 96 kHz Enhanced Processing + + ti,tas5822: 35-W, Digital Input, Stereo, Closed-Loop Class-D Audio + Amplifier with 96 kHz Enhanced Processing + ti,tas5825: 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop 4.5V to 26.4V Class-D Audio Amplifier with 192-kHz Extended Audio Processing. - ti,tas5827: 47-W Stereo, Digital Input, High Efficiency Closed-Loop Class-D - Amplifier with Class-H Algorithm + ti,tas5827: 47-W Stereo, Digital Input, High Efficiency Closed-Loop + Class-D Amplifier with Class-H Algorithm + + ti,tas5828: 50-W Stereo, Digital Input, High Efficiency Closed-Loop + Class-D Amplifier with Hybrid-Pro Algorithm + + ti,tas5830: 65-W Stereo, Digital Input, High Efficiency Closed-Loop + Class-D Amplifier with Class-H Algorithm oneOf: - items: - enum: @@ -78,10 +115,19 @@ properties: - ti,tas2120 - ti,tas2320 - ti,tas2563 + - ti,tas2568 - ti,tas2570 - ti,tas2572 + - ti,tas2574 + - ti,tas5802 + - ti,tas5806m + - ti,tas5806md + - ti,tas5815 + - ti,tas5822 - ti,tas5825 - ti,tas5827 + - ti,tas5828 + - ti,tas5830 - const: ti,tas2781 - enum: - ti,tas2781 @@ -117,6 +163,8 @@ allOf: - ti,tas2118 - ti,tas2120 - ti,tas2320 + - ti,tas2568 + - ti,tas2574 then: properties: reg: @@ -182,7 +230,40 @@ allOf: compatible: contains: enum: + - ti,tas5802 + - ti,tas5815 + then: + properties: + reg: + maxItems: 4 + items: + minimum: 0x54 + maximum: 0x57 + + - if: + properties: + compatible: + contains: + enum: + - ti,tas5806m + - ti,tas5806md + - ti,tas5822 + then: + properties: + reg: + maxItems: 4 + items: + minimum: 0x2c + maximum: 0x2f + + - if: + properties: + compatible: + contains: + enum: - ti,tas5827 + - ti,tas5828 + - ti,tas5830 then: properties: reg: diff --git a/Documentation/devicetree/bindings/sound/trivial-codec.yaml b/Documentation/devicetree/bindings/sound/trivial-codec.yaml new file mode 100644 index 000000000000..9a35dfb17349 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/trivial-codec.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/trivial-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial Audio Codec + +maintainers: + - Rob Herring <robh@kernel.org> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + # Analog Devices SSM2602 I2S audio CODEC devices + - adi,ssm2602 + - adi,ssm2603 + - adi,ssm2604 + - adi,ssm3515 + # Cirrus Logic CS4265 audio DAC + - cirrus,cs4265 + - cirrus,cs4341a + - cirrus,cs4349 + - dlg,da9055-codec + # Nuvoton Technology Corporation NAU85L40 Audio CODEC + - nuvoton,nau8540 + - nuvoton,nau8810 + - nuvoton,nau8812 + - nuvoton,nau8814 + # NXP TFA9879 class-D audio amplifier + - nxp,tfa9879 + - nxp,uda1342 + - sdw3019f836300 + - ti,pcm1789 + - ti,pcm1792a + - ti,pcm5102a + - wlf,wm8510 + - wlf,wm8523 + - wlf,wm8580 + - wlf,wm8581 + - wlf,wm8711 + - wlf,wm8728 + - wlf,wm8737 + - wlf,wm8750 + - wlf,wm8753 + - wlf,wm8770 + - wlf,wm8776 + - wlf,wm8961 + - wlf,wm8974 + - wlf,wm8987 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8523"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml deleted file mode 100644 index 6d12b0ac37e2..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8510.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8510 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8510 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8510"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml deleted file mode 100644 index decc395bb873..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8523.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8523 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8523 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8523"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml deleted file mode 100644 index 2f27852cdc20..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8580.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8580 and WM8581 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - wlf,wm8580 - - wlf,wm8581 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8580"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml deleted file mode 100644 index ecaac2818b44..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8711.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8711 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8711 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8711"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml deleted file mode 100644 index fc89475a051e..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8728.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8728 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8728 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8728"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml deleted file mode 100644 index 12d8765726d8..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8737.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8737 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8737 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8737"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml deleted file mode 100644 index 96859e38315b..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8750 and WM8987 audio CODECs - -description: | - These devices support both I2C and SPI (configured with pin strapping - on the board). - -maintainers: - - Mark Brown <broonie@kernel.org> - -properties: - compatible: - enum: - - wlf,wm8750 - - wlf,wm8987 - - reg: - description: - The I2C address of the device for I2C, the chip select number for SPI - maxItems: 1 - -additionalProperties: false - -required: - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml deleted file mode 100644 index 9eebe7d7f0b7..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml +++ /dev/null @@ -1,62 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8753.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8753 audio CODEC - -description: | - Pins on the device (for linking into audio routes): - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * MONO1 - * MONO2 - * OUT3 - * OUT4 - * LINE1 - * LINE2 - * RXP - * RXN - * ACIN - * ACOP - * MIC1N - * MIC1 - * MIC2N - * MIC2 - * Mic Bias - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8753 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml deleted file mode 100644 index 7bbc96ee81be..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8776 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8776 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml deleted file mode 100644 index f58078545569..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Wolfson WM8961 Ultra-Low Power Stereo CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8961 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - wm8961: codec@4a { - compatible = "wlf,wm8961"; - reg = <0x4a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml deleted file mode 100644 index d27300207c67..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8974 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8974 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8974"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt deleted file mode 100644 index cac762a1105d..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8770.txt +++ /dev/null @@ -1,16 +0,0 @@ -WM8770 audio CODEC - -This device supports SPI. - -Required properties: - - - compatible : "wlf,wm8770" - - - reg : the chip select number. - -Example: - -wm8770: codec@1 { - compatible = "wlf,wm8770"; - reg = <1>; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index 8de96abe9da1..27414b78d61d 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -14,9 +14,14 @@ allOf: properties: compatible: - enum: - - cdns,spi-r1p6 - - xlnx,zynq-spi-r1p6 + oneOf: + - enum: + - xlnx,zynq-spi-r1p6 + - items: + - enum: + - xlnx,zynqmp-spi-r1p6 + - xlnx,versal-net-spi-r1p6 + - const: cdns,spi-r1p6 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 748faf7f7081..ce6762c92fda 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -34,6 +34,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rk3506-spi - rockchip,rk3528-spi - rockchip,rk3562-spi - rockchip,rk3568-spi diff --git a/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml b/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml new file mode 100644 index 000000000000..7fd1a86d7287 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/fsl,imx91-tmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX91 Thermal + +maintainers: + - Pengfei Li <pengfei.li_1@nxp.com> + +description: + i.MX91 features a new temperature sensor. It includes programmable + temperature threshold comparators for both normal and privileged + accesses and allows a programmable measurement frequency for the + Periodic One-Shot Measurement mode. Additionally, it provides + status registers for indicating the end of measurement and threshold + violation events. + +properties: + compatible: + items: + - const: fsl,imx91-tmu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + items: + - description: Comparator 1 irq + - description: Comparator 2 irq + - description: Data ready irq + + interrupt-names: + items: + - const: thr1 + - const: thr2 + - const: ready + + nvmem-cells: + items: + - description: Phandle to the trim control 1 provided by ocotp + - description: Phandle to the trim control 2 provided by ocotp + + nvmem-cell-names: + items: + - const: trim1 + - const: trim2 + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +allOf: + - $ref: thermal-sensor.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx93-clock.h> + + thermal-sensor@44482000 { + compatible = "fsl,imx91-tmu"; + reg = <0x44482000 0x1000>; + #thermal-sensor-cells = <0>; + clocks = <&clk IMX93_CLK_TMC_GATE>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thr1", "thr2", "ready"; + nvmem-cells = <&tmu_trim1>, <&tmu_trim2>; + nvmem-cell-names = "trim1", "trim2"; + }; + +... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 78e2f6573b96..3c5256b0cd9f 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -36,10 +36,15 @@ properties: - qcom,msm8974-tsens - const: qcom,tsens-v0_1 + - description: + v1 of TSENS without RPM which requires to be explicitly reset + and enabled in the driver. + enum: + - qcom,ipq5018-tsens + - description: v1 of TSENS items: - enum: - - qcom,ipq5018-tsens - qcom,msm8937-tsens - qcom,msm8956-tsens - qcom,msm8976-tsens @@ -50,11 +55,13 @@ properties: items: - enum: - qcom,glymur-tsens + - qcom,kaanapali-tsens - qcom,milos-tsens - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,qcm2290-tsens + - qcom,qcs8300-tsens - qcom,qcs615-tsens - qcom,sa8255p-tsens - qcom,sa8775p-tsens diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml index 8d3f3c24f0f2..befdc8b7a082 100644 --- a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml +++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml @@ -16,7 +16,11 @@ description: properties: compatible: - const: renesas,r9a09g047-tsu + oneOf: + - const: renesas,r9a09g047-tsu # RZ/G3E + - items: + - const: renesas,r9a09g057-tsu # RZ/V2H + - const: renesas,r9a09g047-tsu # RZ/G3E reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml b/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml new file mode 100644 index 000000000000..e08d3d2d306b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/realtek,rtd1625-systimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek System Timer + +maintainers: + - Hao-Wen Ting <haowen.ting@realtek.com> + +description: + The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter operating + at a fixed 1MHz frequency. Thanks to its compare match interrupt capability, + the timer natively supports oneshot mode for tick broadcast functionality. + +properties: + compatible: + oneOf: + - const: realtek,rtd1625-systimer + - items: + - const: realtek,rtd1635-systimer + - const: realtek,rtd1625-systimer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@89420 { + compatible = "realtek,rtd1635-systimer", + "realtek,rtd1625-systimer"; + reg = <0x89420 0x18>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml index aaa0bbb5bfe1..cea84ab2204f 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml @@ -15,6 +15,7 @@ select: compatible: contains: enum: + - qcom,kaanapali-ufshc - qcom,sm8650-ufshc - qcom,sm8750-ufshc required: @@ -24,6 +25,7 @@ properties: compatible: items: - enum: + - qcom,kaanapali-ufshc - qcom,sm8650-ufshc - qcom,sm8750-ufshc - const: qcom,ufshc diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index e3a7df91f7f1..89b1fb90aeeb 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -76,6 +76,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index baf130669c38..73e7a60a0060 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -89,13 +89,21 @@ required: - reg - "#address-cells" - "#size-cells" - - dma-ranges - ranges - clocks - clock-names - interrupts - power-domains +allOf: + - if: + properties: + compatible: + const: fsl,imx8mp-dwc3 + then: + required: + - dma-ranges + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index e588514fab2d..793662f6f3bf 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -52,6 +52,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# - if: required: - mode-switch diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index d805dde80796..4d2fcaa71870 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -46,6 +46,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index 589914d22bf2..25fab5fdc2cd 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -91,6 +91,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml index aeb33667818e..eaeab1c01a59 100644 --- a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml +++ b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml @@ -81,6 +81,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml index dfd084ed9024..d49a58d5478f 100644 --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -68,6 +68,7 @@ properties: - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 - qcom,x1e80100-dwc3 + - qcom,x1e80100-dwc3-mp - const: qcom,snps-dwc3 reg: @@ -460,8 +461,10 @@ allOf: then: properties: interrupts: + minItems: 4 maxItems: 5 interrupt-names: + minItems: 4 items: - const: dwc_usb3 - const: pwr_event diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 96346723f3e9..96dcec9b7620 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -60,6 +60,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml index f713cac4a8ac..e1501ea6b50b 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml b/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml new file mode 100644 index 000000000000..6bf0c97e30ae --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Ports Graph Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Ports Graph properties for devices handling USB mode and orientation switching. + +properties: + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml index 896201912630..f77731493dc4 100644 --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -25,56 +25,4 @@ properties: description: Possible handler of SuperSpeed signals retiming type: boolean - port: - $ref: /schemas/graph.yaml#/$defs/port-base - description: - A port node to link the device to a TypeC controller for the purpose of - handling altmode muxing and orientation switching. - - properties: - endpoint: - $ref: /schemas/graph.yaml#/$defs/endpoint-base - unevaluatedProperties: false - properties: - data-lanes: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - maximum: 8 - - ports: - $ref: /schemas/graph.yaml#/properties/ports - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: - Super Speed (SS) Output endpoint to the Type-C connector - - port@1: - $ref: /schemas/graph.yaml#/$defs/port-base - description: - Super Speed (SS) Input endpoint from the Super-Speed PHY - unevaluatedProperties: false - - properties: - endpoint: - $ref: /schemas/graph.yaml#/$defs/endpoint-base - unevaluatedProperties: false - properties: - data-lanes: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - maximum: 8 - -oneOf: - - required: - - port - - required: - - ports - additionalProperties: true diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f1d1882009ba..f2ae0c538e48 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -20,7 +20,7 @@ patternProperties: "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true "^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*": true "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true - "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true + "^(simple-audio-card|st-plgpio|st-spics|ts|vsc8531),.*": true "^pool[0-3],.*": true # Keep list in alphabetical order. @@ -176,6 +176,8 @@ patternProperties: description: All Sensors Corporation "^asix,.*": description: ASIX Electronics Corporation + "^asl-tek,.*": + description: ASL Xiamen Technology Co., Ltd. "^aspeed,.*": description: ASPEED Technology Inc. "^asrock,.*": @@ -835,6 +837,8 @@ patternProperties: description: JOZ BV "^jty,.*": description: JTY + "^jutouch,.*": + description: JuTouch Technology Co., Ltd. "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -1323,6 +1327,8 @@ patternProperties: description: Raumfeld GmbH "^raydium,.*": description: Raydium Semiconductor Corp. + "^raystar,.*": + description: Raystar Optronics, Inc. "^rda,.*": description: Unisoc Communications, Inc. "^realtek,.*": @@ -1705,6 +1711,8 @@ patternProperties: description: Universal Scientific Industrial Co., Ltd. "^usr,.*": description: U.S. Robotics Corporation + "^ultrarisc,.*": + description: UltraRISC Technology Co., Ltd. "^ultratronik,.*": description: Ultratronik GmbH "^utoo,.*": |