diff options
Diffstat (limited to 'arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi new file mode 100644 index 000000000000..8da47c916313 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza <mateusz.koza@grinn-global.com> + */ + +#include "mt6359.dtsi" +#include <dt-bindings/input/input.h> + +/ { + aliases { + i2c1 = &i2c1; + mmc0 = &mmc0; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mfg0 { + domain-supply = <&mt6359_vproc2_buck_reg>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn18_ldo_reg { + regulator-name = "vcn18_pmu"; + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-name = "vcn33_2_pmu"; + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-name = "dvdd_proc_l"; + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-name = "dvdd_core"; + regulator-always-on; +}; + +&mt6359_vpa_buck_reg { + regulator-name = "vpa_pmu"; + regulator-max-microvolt = <3100000>; +}; + +&mt6359_vproc2_buck_reg { + /* The name "vgpu" is required by mtk-regulator-coupler */ + regulator-name = "vgpu"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vpu_buck_reg { + regulator-name = "dvdd_adsp"; + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-name = "va12_abb2_pmu"; + regulator-always-on; +}; + +&mt6359_vsim1_ldo_reg { + regulator-name = "vsim1_pmu"; + regulator-enable-ramp-delay = <480>; +}; + +&mt6359_vsram_others_ldo_reg { + /* The name "vsram_gpu" is required by mtk-regulator-coupler */ + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vproc2_buck_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vufs_ldo_reg { + regulator-name = "vufs18_pmu"; + regulator-always-on; +}; + +&pio { + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + }; +}; |