diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi new file mode 100644 index 000000000000..f8797a666dbf --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 StarFive Technology Co., Ltd. + * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + vcc_3v3_pcie: regulator-vcc-3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&sysgpio 27 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc_3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu_opp { + /delete-node/ opp-375000000; + /delete-node/ opp-500000000; + /delete-node/ opp-750000000; + /delete-node/ opp-1500000000; + + opp-312500000 { + opp-hz = /bits/ 64 <312500000>; + opp-microvolt = <800000>; + }; + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + opp-microvolt = <800000>; + }; + opp-625000000 { + opp-hz = /bits/ 64 <625000000>; + opp-microvolt = <800000>; + }; + opp-1250000000 { + opp-hz = /bits/ 64 <1250000000>; + opp-microvolt = <1000000>; + }; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&mmc1 { + max-frequency = <50000000>; + keep-power-in-suspend; + non-removable; +}; + +&pcie1 { + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; + +&pwm { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&syscrg { + assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1250000000>; +}; + +&sysgpio { + uart1_pins: uart1-0 { + tx-pins { + pinmux = <GPIOMUX(22, GPOUT_SYS_UART1_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(23, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART1_RX)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + + cts-pins { + pinmux = <GPIOMUX(24, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART1_CTS)>; + input-enable; + }; + + rts-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_UART1_RTS, + GPOEN_ENABLE, + GPI_NONE)>; + input-enable; + }; + }; + + usb0_pins: usb0-0 { + power-pins { + pinmux = <GPIOMUX(26, GPOUT_HIGH, + GPOEN_ENABLE, + GPI_NONE)>; + input-disable; + }; + + switch-pins { + pinmux = <GPIOMUX(62, GPOUT_LOW, + GPOEN_ENABLE, + GPI_NONE)>; + input-disable; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; |