diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-master.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-master.c | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 09e72ead51ee..528b969253a7 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -180,12 +180,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) } /** - * i2c_dw_init_master() - Initialize the designware I2C master hardware + * i2c_dw_init_master() - Initialize the DesignWare I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. * This function is called during I2C init function, and in case of timeout at * run time. + * + * Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_master(struct dw_i2c_dev *dev) { @@ -353,7 +355,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, /* * Initiate the i2c read/write transaction of buffer length, * and poll for bus busy status. For the last message transfer, - * update the command with stopbit enable. + * update the command with stop bit enable. */ for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) { if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1) @@ -398,7 +400,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, /* * Initiate (and continue) low level master read/write transaction. - * This function is only called from i2c_dw_isr, and pumping i2c_msg + * This function is only called from i2c_dw_isr(), and pumping i2c_msg * messages into the tx buffer. Even if the size of i2c_msg data is * longer than the size of the tx buffer, it handles everything. */ @@ -436,7 +438,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf = msgs[dev->msg_write_idx].buf; buf_len = msgs[dev->msg_write_idx].len; - /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and + /* + * If both IC_EMPTYFIFO_HOLD_MASTER_EN and * IC_RESTART_EN are set, we must manually * set restart bit between messages. */ @@ -967,7 +970,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; adap->bus_recovery_info = rinfo; - dev_info(dev->dev, "running with gpio recovery mode! scl%s", + dev_info(dev->dev, "running with GPIO recovery mode! scl%s", rinfo->sda_gpiod ? ",sda" : ""); return 0; |