| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
|
|
Patch series "mm/damon: misc cleanups".
Yet another batch of misc cleanups and refactoring for DAMON code, tests,
and documents.
First two patches (1and 2) rename DAMOS core filters related code for
readability.
Three following patches (3-5) refactor page table walk callback functions
in DAMON, as suggested by Hugh and David, and I promised.
Next two patches (6 and 7) refactor DAMON core layer kunit test and sysfs
interface selftest to be simple and deduplicated.
Final two patches (8 and 9) fix up sphinx and grammatical errors on
documents.
This patch (of 9):
DAMOS filters handled by the core layer are called core filters, while
those handled by the ops layer are called ops filters. They share the
same type but are managed in different places since core filters are
evaluated before the ops filters. They also have different helper
functions that depend on their managed places.
The helper functions for ops filters have '_ops_' keyword on their name,
so it is easy to know they are for ops filters. Meanwhile, the helper
functions for core filters are not having the 'core' keyword on their
name. This makes it easy to be mistakenly used for ops filters. Actually
there was such a bug.
To avoid future mistakes from similar confusions, rename DAMOS core
filters helper functions to have a keyword 'core' on their names.
Link: https://lkml.kernel.org/r/20251112154114.66053-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251112154114.66053-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The generic API is intended to be separated from the implementation of
page table algorithms. It contains only accessors for walking and
manipulating the table and helpers that are useful for building an
implementation. Memory management is not in the generic API, but part of
the implementation.
Using a multi-compilation approach the implementation module would include
headers in this order:
common.h
defs_FMT.h
pt_defs.h
FMT.h
pt_common.h
IMPLEMENTATION.h
Where each compilation unit would have a combination of FMT and
IMPLEMENTATION to produce a per-format per-implementation module.
The API is designed so that the format headers have minimal logic, and
default implementations are provided if the format doesn't include one.
Generally formats provide their code via an inline function using the
pattern:
static inline FMTpt_XX(..) {}
#define pt_XX FMTpt_XX
The common code then enforces a function signature so that there is no
drift in function arguments, or accidental polymorphic functions (as has
been slightly troublesome in mm). Use of function-like #defines are
avoided in the format even though many of the functions are small enough.
Provide kdocs for the API surface.
This is enough to implement the 8 initial format variations with all of
their features:
* Entries comprised of contiguous blocks of IO PTEs for larger page
sizes (AMDv1, ARMv8)
* Multi-level tables, up to 6 levels. Runtime selected top level
* The size of the top table level can be selected at runtime (ARM's
concatenated tables)
* The number of levels in the table can optionally increase dynamically
during map (AMDv1)
* Optional leaf entries at any level
* 32 bit/64 bit virtual and output addresses, using every bit
* Sign extended addressing (x86)
* Dirty tracking
A basic simple format takes about 200 lines to declare the require inline
functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
All users have been replaced by drm_for_each_bridge_in_chain_scoped().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250808-drm-bridge-alloc-getput-for_each_bridge-v2-7-edb6ee81edf1@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
drm_for_each_bridge_in_chain() iterates ofer the bridges in an encoder
chain without protecting the lifetime of the bridges using
drm_bridge_get/put(). This creates a risk window where the bridge could be
freed while iterating on it. Users of drm_for_each_bridge_in_chain() cannot
solve this reliably.
Add variant of drm_for_each_bridge_in_chain() that gets/puts the bridge
reference at the beginning/end of each iteration, and puts it if breaking
ot of the loop.
Note that this requires adding a new drm_bridge_get_next_bridge_and_put()
function because, unlike similar functions as __of_get_next_child(),
drm_bridge_get_next_bridge() gets the "next" pointer but does not put the
"prev" pointer. Unfortunately drm_bridge_get_next_bridge() cannot be
modified to put the "prev" pointer because some of its users rely on
this, such as drm_atomic_bridge_propagate_bus_flags().
Also deprecate drm_for_each_bridge_in_chain(), in preparation for removing
it after converting all users to the scoped version.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250808-drm-bridge-alloc-getput-for_each_bridge-v2-3-edb6ee81edf1@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
for_each_free_mem_pfn_range_in_zone_from() and its "backend" implementation
__next_mem_pfn_range_in_zone() were only used by deferred initialization of
the memory map.
Remove them as they are not used anymore.
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
One of my 'git grep' searches tripped on this file listing
an already removed <linux/list.h> primitive.
Refresh it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a list of possible encoders to the connector configuration and
helpers to attach and detach them.
Now that the default configuration has its connector and encoder
correctly, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-15-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of connectors to vkms_config and helper functions to add and
remove as many connectors as wanted.
For backwards compatibility, add one enabled connector to the default
configuration.
A future patch will allow to attach connectors and encoders, but for the
moment there are no changes in the way the output is configured.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-14-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of possible CRTCs to the encoder configuration and helpers to
attach and detach them.
Now that the default configuration has its encoder and CRTC correctly
attached, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-13-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of encoders to vkms_config and helper functions to add and
remove as many encoders as wanted.
For backwards compatibility, add one encoder to the default
configuration.
A future patch will allow to attach encoders and CRTCs, but for the
moment there are no changes in the way the output is configured.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-12-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of possible CRTCs to the plane configuration and helpers to
attach, detach and get the primary and cursor planes attached to a CRTC.
Now that the default configuration has its planes and CRTC correctly
attached, configure the output following the configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-11-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of CRTCs to vkms_config and helper functions to add and
remove as many CRTCs as wanted.
For backwards compatibility, add one CRTC to the default configuration.
A future patch will allow to attach planes and CRTCs, but for the
moment there are no changes in the way the output is configured.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-10-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add a list of planes to vkms_config and create as many planes as
configured during output initialization.
For backwards compatibility, add one primary plane and, if configured,
one cursor plane and NUM_OVERLAY_PLANES planes to the default
configuration.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218101214.5790-9-jose.exposito89@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Re-run the shell fragment that generated the original list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240730-clang-format-for-each-macro-update-v2-1-254fca862c97@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
'clang-format' is on 'Other material' section of 'process/index', but it
may fit more under 'dev-tools/' directory. Move it.
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240624185312.94537-5-sj@kernel.org
|
|
Re-run the shell fragment that generated the original list.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add maple tree's for_each macros so clang-format operates correctly on
{mt,mas}_for_each.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20231208-clang-format-mt-for-each-v1-1-b4b73186b886@quicinc.com
[ Sorted properly. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convenience macro to iterate over every struct group_device in the group.
Replace all open coded list_for_each_entry's with this macro.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v5-1b99ae392328+44574-iommu_err_unwind_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
|
|
The PCI core has just been amended to create a pci_doe_mb struct for
every DOE instance on device enumeration. CXL (the only in-tree DOE
user so far) has been migrated to use those mailboxes instead of
creating its own.
That leaves pcim_doe_create_mb() and pci_doe_for_each_off() without any
callers, so drop them.
pci_doe_supports_prot() is now only used internally, so declare it
static.
pci_doe_destroy_mb() is no longer used as callback for
devm_add_action(), so refactor it to accept a struct pci_doe_mb pointer
instead of a generic void pointer.
Because pci_doe_create_mb() is only called on device enumeration, i.e.
before driver binding, the workqueue name never contains a driver name.
So replace dev_driver_string() with dev_bus_name() when generating the
workqueue name.
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ming Li <ming4.li@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/64f614b6584982986c55d2c6229b4ee2b276dd59.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.
While at it drop doubled empty line before pdev_sort_resources().
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a for_each_active_route() macro to replace the repeated pattern
of iterating on the active routes of a routing table.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
this_cpu_inc() on strong load-store architectures.
- Introduce new console_list_lock to synchronize a manipulation of the
list of registered consoles and their flags.
This is a first step in removing the big-kernel-lock-like behavior of
console_lock(). This semaphore still serializes console->write()
calbacks against:
- each other. It primary prevents potential races between early
and proper console drivers using the same device.
- suspend()/resume() callbacks and init() operations in some
drivers.
- various other operations in the tty/vt and framebufer
susbsystems. It is likely that console_lock() serializes even
operations that are not directly conflicting with the
console->write() callbacks here. This is the most complicated
big-kernel-lock aspect of the console_lock() that will be hard
to untangle.
- Introduce new console_srcu lock that is used to safely iterate and
access the registered console drivers under SRCU read lock.
This is a prerequisite for introducing atomic console drivers and
console kthreads. It will reduce the complexity of serialization
against normal consoles and console_lock(). Also it should remove the
risk of deadlock during critical situations, like Oops or panic, when
only atomic consoles are registered.
- Check whether the console is registered instead of enabled on many
locations. It was a historical leftover.
- Cleanly force a preferred console in xenfb code instead of a dirty
hack.
- A lot of code and comment clean ups and improvements.
* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
printk: htmldocs: add missing description
tty: serial: sh-sci: use setup() callback for early console
printk: relieve console_lock of list synchronization duties
tty: serial: kgdboc: use console_list_lock to trap exit
tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
tty: serial: kgdboc: use console_list_lock for list traversal
tty: serial: kgdboc: use srcu console list iterator
proc: consoles: use console_list_lock for list iteration
tty: tty_io: use console_list_lock for list synchronization
printk, xen: fbfront: create/use safe function for forcing preferred
netconsole: avoid CON_ENABLED misuse to track registration
usb: early: xhci-dbc: use console_is_registered()
tty: serial: xilinx_uartps: use console_is_registered()
tty: serial: samsung_tty: use console_is_registered()
tty: serial: pic32_uart: use console_is_registered()
tty: serial: earlycon: use console_is_registered()
tty: hvc: use console_is_registered()
efi: earlycon: use console_is_registered()
tty: nfcon: use console_is_registered()
serial_core: replace uart_console_enabled() with uart_console_registered()
...
|
|
Provide an NMI-safe SRCU protected variant to walk the console list.
Note that all console fields are now set before adding the console
to the list to avoid the console becoming visible by SCRU readers
before being fully initialized.
This is a preparatory change for a new console infrastructure which
operates independent of the console BKL.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221116162152.193147-4-john.ogness@linutronix.de
|
|
ping_lookup() does not acquire the table spinlock, so iteration should
use hlist_nulls_for_each_entry_rcu().
Spotted during code review.
Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221129140644.28525-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is the remainder of the IOAS data structure. Provide an object called
an io_pagetable that is composed of iopt_areas pointing at iopt_pages,
along with a list of iommu_domains that mirror the IOVA to PFN map.
At the top this is a simple interval tree of iopt_areas indicating the map
of IOVA to iopt_pages. An xarray keeps track of a list of domains. Based
on the attached domains there is a minimum alignment for areas (which may
be smaller than PAGE_SIZE), an interval tree of reserved IOVA that can't
be mapped and an IOVA of allowed IOVA that can always be mappable.
The concept of an 'access' refers to something like a VFIO mdev that is
accessing the IOVA and using a 'struct page *' for CPU based access.
Externally an API is provided that matches the requirements of the IOCTL
interface for map/unmap and domain attachment.
The API provides a 'copy' primitive to establish a new IOVA map in a
different IOAS from an existing mapping by re-using the iopt_pages. This
is the basic mechanism to provide single pinning.
This is designed to support a pre-registration flow where userspace would
setup an dummy IOAS with no domains, map in memory and then establish an
access to pin all PFNs into the xarray.
Copy can then be used to create new IOVA mappings in a different IOAS,
with iommu_domains attached. Upon copy the PFNs will be read out of the
xarray and mapped into the iommu_domains, avoiding any pin_user_pages()
overheads.
Link: https://lore.kernel.org/r/10-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The top of the data structure provides an IO Address Space (IOAS) that is
similar to a VFIO container. The IOAS allows map/unmap of memory into
ranges of IOVA called iopt_areas. Multiple IOMMU domains (IO page tables)
and in-kernel accesses (like VFIO mdevs) can be attached to the IOAS to
access the PFNs that those IOVA areas cover.
The IO Address Space (IOAS) datastructure is composed of:
- struct io_pagetable holding the IOVA map
- struct iopt_areas representing populated portions of IOVA
- struct iopt_pages representing the storage of PFNs
- struct iommu_domain representing each IO page table in the system IOMMU
- struct iopt_pages_access representing in-kernel accesses of PFNs (ie
VFIO mdevs)
- struct xarray pinned_pfns holding a list of pages pinned by in-kernel
accesses
This patch introduces the lowest part of the datastructure - the movement
of PFNs in a tiered storage scheme:
1) iopt_pages::pinned_pfns xarray
2) Multiple iommu_domains
3) The origin of the PFNs, i.e. the userspace pointer
PFN have to be copied between all combinations of tiers, depending on the
configuration.
The interface is an iterator called a 'pfn_reader' which determines which
tier each PFN is stored and loads it into a list of PFNs held in a struct
pfn_batch.
Each step of the iterator will fill up the pfn_batch, then the caller can
use the pfn_batch to send the PFNs to the required destination. Repeating
this loop will read all the PFNs in an IOVA range.
The pfn_reader and pfn_batch also keep track of the pinned page accounting.
While PFNs are always stored and accessed as full PAGE_SIZE units the
iommu_domain tier can store with a sub-page offset/length to support
IOMMUs with a smaller IOPTE size than PAGE_SIZE.
Link: https://lore.kernel.org/r/8-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The span iterator travels over the indexes of the interval_tree, not the
nodes, and classifies spans of indexes as either 'used' or 'hole'.
'used' spans are fully covered by nodes in the tree and 'hole' spans have
no node intersecting the span.
This is done greedily such that spans are maximally sized and every
iteration step switches between used/hole.
As an example a trivial allocator can be written as:
for (interval_tree_span_iter_first(&span, itree, 0, ULONG_MAX);
!interval_tree_span_iter_done(&span);
interval_tree_span_iter_next(&span))
if (span.is_hole &&
span.last_hole - span.start_hole >= allocation_size - 1)
return span.start_hole;
With all the tricky boundary conditions handled by the library code.
The following iommufd patches have several algorithms for its overlapping
node interval trees that are significantly simplified with this kind of
iteration primitive. As it seems generally useful, put it into lib/.
Link: https://lore.kernel.org/r/3-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based
mailbox with standard protocol discovery. Each mailbox is accessed
through a DOE Extended Capability.
Each DOE mailbox must support the DOE discovery protocol in addition to
any number of additional protocols.
Define core PCIe functionality to manage a single PCIe DOE mailbox at a
defined config space offset. Functionality includes iterating,
creating, query of supported protocol, and task submission. Destruction
of the mailboxes is device managed.
Cc: "Li, Ming" <ming4.li@intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220719205249.566684-4-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Set SpaceBeforeParens to ControlStatementsExceptForEachMacros to not add
space between a for_each macro and the following parenthesis. This
option is available since clang-format-11 [1] and is in line with the
checkpatch.pl rules [2].
I found that this patch has also been sent by Brian Norris some weeks
ago [3].
Link: https://clang.llvm.org/docs/ClangFormatStyleOptions.html [1]
Link: https://lore.kernel.org/r/8b6b252b-47a6-9d52-f0bd-10d3bc4ad244@digikod.net [2]
Link: https://lore.kernel.org/lkml/YmHuZjmP9MxkgJ0R@google.com/ [3]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-6-mic@digikod.net
[Adjusted authorship as agreed]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Thanks to IndentGotoLabels introduced with clang-format-10 [1], we can
avoid goto labels identation. This follows the current coding style and
it is then in line with the checkpatch.pl rules [2].
Link: https://clang.llvm.org/docs/ClangFormatStyleOptions.html [1]
Link: https://lore.kernel.org/r/8b6b252b-47a6-9d52-f0bd-10d3bc4ad244@digikod.net [2]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-4-mic@digikod.net
[Updated header comment to >= 10]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We get new interesting formating with clang-format greater or equal to 6
as stated in the removed comments. Miguel Ojeda suggested to even move
the minimal clang-format version to 11, which is the minimum LLVM
supported at the moment [1].
Automatically updated with:
sed -i 's/^\(\s*\)#\(\S*\s\+\S*\) # Unknown to clang-format.*/\1\2/' .clang-format
Link: https://lore.kernel.org/r/CANiq72nLOfmEt-CZBmm2ouEB_x6Jm9ggDVFCVJxYxKw7O0LTzQ@mail.gmail.com [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-3-mic@digikod.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add tools/ to the shell fragment generating the for_each list and update
it. This is useful to format files in the tools directory (e.g.
selftests) with the same coding style as the kernel.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-2-mic@digikod.net
[Reworded and rebased on top of previous commits]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This avoids differences when different people run the command,
which is relevant for our use case, e.g.:
$ LC_ALL=en_US.UTF-8 sort test
ata_for_each_link
__ata_qc_for_each
ata_qc_for_each
$ LC_ALL=C sort test
__ata_qc_for_each
ata_for_each_link
ata_qc_for_each
Link: https://lore.kernel.org/lkml/CANiq72=7=ZpAObWRmposOmnyZ8XR_eNHCBtA3bu3fusmcPUwDA@mail.gmail.com/
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Re-run the shell fragment that generated the original list.
This brings it up to date, so that the next patches that tweak it
further are more clear on what they change.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There is no real reason to do several loops over the MSI descriptors
instead of just doing one loop. In case of an error everything is undone
anyway so it does not matter whether it's a partial or a full rollback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210749.010234767@linutronix.de
|
|
Re-run the shell fragment that generated the original list.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull initial support for CXL (Compute Express Link) from Dan Williams:
"Introduce an initial driver for CXL 2.0 Type-3 Memory Devices.
CXL is Compute Express Link which released the 2.0 specification in
November. The Linux relevant changes in CXL 2.0 are support for an OS
to dynamically assign address space to memory devices, support for
switches, persistent memory, and hotplug.
A Type-3 Memory Device is a PCI enumerated device presenting the CXL
Memory Device Class Code and implementing the CXL.mem protocol.
CXL.mem allows device to advertise CPU and I/O coherent memory to the
system, i.e. typical "System RAM" and "Persistent Memory" in Linux
/proc/iomem terms.
In addition to the CXL.mem fast path there is an administrative
command hardware mailbox interface for maintenance and provisioning.
It is this command interface that is the focus of the initial driver.
With this driver a CXL device that is mapped by the BIOS can be
administered by Linux.
Linux support for CXL PMEM and dynamic CXL address space management
are to be implemented post v5.12"
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
4cdadfd5e0a7 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints")
13237183c735 ("cxl/mem: Add a "RAW" send command")
472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
57ee605b976c ("cxl/mem: Add set of informational commands")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
8adaf747c9f0 ("cxl/mem: Find device capabilities")
b39cb1052a5c ("cxl/mem: Register CXL memX devices")
* tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/mem: Fix potential memory leak
cxl/mem: Return -EFAULT if copy_to_user() fails
MAINTAINERS: Add maintainers of the CXL driver
cxl/mem: Add set of informational commands
cxl/mem: Enable commands via CEL
cxl/mem: Add a "RAW" send command
cxl/mem: Add basic IOCTL interface
cxl/mem: Register CXL memX devices
cxl/mem: Find device capabilities
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
|
|
Add a straightforward IOCTL that provides a mechanism for userspace to
query the supported memory device commands. CXL commands as they appear
to userspace are described as part of the UAPI kerneldoc. The command
list returned via this IOCTL will contain the full set of commands that
the driver supports, however, some of those commands may not be
available for use by userspace.
Memory device commands first appear in the CXL 2.0 specification. They
are submitted through a mailbox mechanism specified in the CXL 2.0
specification.
The send command allows userspace to issue mailbox commands directly to
the hardware. The list of available commands to send are the output of
the query command. The driver verifies basic properties of the command
and possibly inspect the input (or output) payload to determine whether
or not the command is allowed (or might taint the kernel).
Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Re-run the shell fragment that generated the original list.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
|
|
for_each_memblock() is used to iterate over memblock.memory in a few
places that use data from memblock_region rather than the memory ranges.
Introduce separate for_each_mem_region() and
for_each_reserved_mem_region() to improve encapsulation of memblock
internals from its users.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS]
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Iteration over memblock.reserved with for_each_reserved_mem_region() used
__next_reserved_mem_region() that implemented a subset of
__next_mem_region().
Use __for_each_mem_range() and, essentially, __next_mem_region() with
appropriate parameters to reduce code duplication.
While on it, rename for_each_reserved_mem_region() to
for_each_reserved_mem_range() for consistency.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
