| Age | Commit message (Collapse) | Author |
|---|
|
Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed with the "wakeup" interrupt not present in
the BCM7212.
Update the schema to correct the interrupt requirements for BCM2712.
(Requirements for BCM2711 should be unchanged).
Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patch.msgid.link/20241220-dt-bcm2712-fixes-v5-1-cbbf13d2e97a@raspberrypi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The makefile logic to detect if rust is enabled is not working
the way it was expected: instead of using the current setup
for CONFIG_RUST, it uses a cached version from a previous build.
The root cause is that the current logic inside docs/Makefile
uses a cached version of CONFIG_RUST, from the last time a non
documentation target was executed. That's perfectly fine for
Sphinx build, as it doesn't need to read or depend on any
CONFIG_*.
So, instead of relying at the cache, move the logic to the
wrapper script and let it check the current content of .config,
to verify if CONFIG_RUST was selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <c06b1834ef02099735c13ee1109fa2a2b9e47795.1763722971.git.mchehab+huawei@kernel.org>
|
|
The paragraph mentions only removal of Tested-by and Reviewed-by tags as
action needing mentioning in patch changelog, so some developers treat
it too literally. Acks, as a weaker form of review/approval, should
rarely be removed, but if that happens it should be explained as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251126081905.7684-2-krzysztof.kozlowski@oss.qualcomm.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/alexs/linux into tmp
Chinese translation docs for 6.19
This is the Chinese translation subtree for 6.19. It includes
the following changes:
- Add block part translations
- Update kbuild.rst translations
- Add more scsi translations and fixes
Above patches are tested by 'make htmldocs'
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Raw NAND changes:
* The major change in this MR will be the support for the Allwinner H616
NAND controller, which lead to numerous changes and cleanups in the
driver.
* Another notable change on this driver is the use of
field_get()/field_prep(), but since the global support for this
helpers is going to be merged in the same release as we start using
these helpers, it implies undefining them in the first place to avoid
warnings. Depending on the merging order (Yuri's bitmap branch or
mtd/next), a temporary warning may arise.
* Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously, which
implied to relax the ECC parameters validation in the core a bit.
* The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
* Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
Aside from these main changes, there is the usual load of fixes and API
updates.
|
|
Fix two schema check errors that have lurked since the attribute name
validation was made more strict:
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
not ok 13 nftables.yaml schema validation
'set id' does not match '^[0-9a-z-]+$'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix warning reported by yamllint:
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Apart from the usual small things just driver updates:
- mt76:
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- rtw89
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- rtl8xxxu: 40 MHz connection fixes/support
- brcmfmac: Acer A1 840 tablet quirk
* tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (152 commits)
wifi: mac80211: allow sharing identical chanctx for S1G interfaces
wifi: nl80211: vendor-cmd: intel: fix a blank kernel-doc line warning
wifi: cfg80211: include s1g_primary_2mhz when comparing chandefs
wifi: cfg80211: include s1g_primary_2mhz when sending chandef
wifi: ieee80211: correct FILS status codes
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
wifi: mt76: mt792x: fix wifi init fail by setting MCU_RUNNING after CLC load
wifi: mt76: Strip whitespace from build ddate
wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt7996: skip ieee80211_iter_keys() on scanning link remove
wifi: mt76: mt7996: skip deflink accounting for offchannel links
wifi: mt76: Move mt76_abort_scan out of mt76_reset_device()
wifi: mt76: mt7996: move mt7996_update_beacons under mt76 mutex
wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event()
wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
wifi: mt76: mt7996: fix EMI rings for RRO
wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
wifi: mt76: mt7996: fix MLO set key and group key issues
wifi: mt76: mt7996: fix MLD group index assignment
wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
...
====================
Link: https://patch.msgid.link/20251127103806.17776-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
|
|
'for-next/efi-preempt', 'for-next/assembler-macro', 'for-next/typos', 'for-next/sme-ptrace-disable', 'for-next/local-tlbi-page-reused', 'for-next/mpam', 'for-next/acpi' and 'for-next/documentation', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
|
|
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
|
|
Merge cpufreq updates for 6.19-rc1:
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
* pm-cpufreq: (27 commits)
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
cpufreq: ACPI: Replace udelay() with usleep_range()
cpufreq: intel_pstate: Eliminate some code duplication
cpufreq: intel_pstate: Use mutex guard for driver locking
cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs
cpufreq/amd-pstate: Add static asserts for EPP indices
cpufreq/amd-pstate: Fix some whitespace issues
cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status()
cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULL
cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_string
cpufreq/amd-pstate: Use sysfs_match_string() for epp
cpufreq: tegra194: add WQ_PERCPU to alloc_workqueue users
cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM
Documentation: intel-pstate: Use :ref: directive for internal linking
cpufreq: intel_pstate: Add Diamond Rapids OOB mode support
Documentation: intel_pstate: fix duplicate hyperlink target errors
cpufreq: CPPC: Don't warn if FIE init fails to read counters
cpufreq: nforce2: fix reference count leak in nforce2
cpufreq: tegra186: add OPP support and set bandwidth
cpufreq: dt-platdev: Add JH7110S SOC to the allowlist
...
|
|
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
|
|
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 6.19-rc1 from Daniel Lezcano:
"- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS in the R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for the QCom Tsens (Gaurav Kohli)
- Add the support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
* tag 'thermal-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
|
|
'nvidia/tegra', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
standalone cache drivers for v6.19
ccache:
Add a compatible for the pic64gx SoC. No driver change needed, as it
falls back to the PolarFire SoC.
hisi hha/generic cpu cache maintenance:
Add support for a non-architectural mechanism for invalidating memory
regions, needed for some cxl implementations on arm64 (and probably
elsewhere in the future). The HiSilicon Hydra Home Agent is the first
driver to provide this support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'cache-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
RISC-V soc-drivers for v6.19
Microchip:
Add bindings and mfd drivers for two syscon regions on PolarFire SoC,
needed as part of a rework of the devicetree to permit supporting,
among other things, pinctrl sanely and avoiding the "new" pic64gx SoC
ever using the original incorrect clock nodes. Fiddle with the Microchip
RISC-V MAINTAINERS entry to add these drivers and avoid branding it FPGA
only.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'soc-drivers-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers-late
Amlogic Drivers for v6.19:
- Canvas device leak fix and error handling simplification
- Add more SoCs definitions
- Suport more SoCs for meson-gx-ao-secure
* tag 'amlogic-drivers-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
soc: amlogic: canvas: simplify lookup error handling
soc: amlogic: canvas: fix device leak on lookup
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.19
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add Orange Pi RV
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
riscv: dts: starfive: Add VisionFive 2 Lite board device tree
riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
MAINTAINERS: degrade RISC-V MISC SOC SUPPORT to Odd Fixes
MAINTAINERS: add tree to RISC-V Microchip entry
MAINTAINERS: remove patchwork from RISC-V MISC SOC SUPPORT
MAINTAINERS: add Conor to StarFive entry
riscv: dts: sifive: unmatched: Add PWM controlled fans
riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT Changes for v6.19:
- Fix the PCIe DBI memory region name
- Add ISP nodes for Amlogic C3
- Add power controller nodes for Amlogic S6/S7/S7D
- Add Pinctrl node for Amlogic A4
- Add AO Secure node for Amlogic S6/S7/S7D
- Add GPIO Interrupt node for Amlogic S6/S7/S7D
- Fix S922X cache layout
- New Boards:
- Tanix TX9 Pro
* tag 'amlogic-arm64-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Online repair is now merged in upstream, no need to point to patchset
links anymore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-26
this is a pull request of 27 patches for net-next/main.
The first 17 patches are by Vincent Mailhol and Oliver Hartkopp and
add CAN XL support to the CAN netlink interface.
Geert Uytterhoeven and Biju Das provide 7 patches for the rcar_canfd
driver to add suspend/resume support.
The next 2 patches are by Markus Schneider-Pargmann and add them as
the m_can maintainer.
Conor Dooley's patch updates the mpfs-can DT bindungs.
linux-can-next-for-6.19-20251126
* tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
dt-bindings: can: mpfs: document resets
MAINTAINERS: Simplify m_can section
MAINTAINERS: Add myself as m_can maintainer
can: rcar_canfd: Add suspend/resume support
can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
can: rcar_canfd: Invert CAN clock and close_candev() order
can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
can: rcar_canfd: Use devm_clk_get_optional() for RAM clk
can: rcar_canfd: Invert global vs. channel teardown
can: rcar_canfd: Invert reset assert order
can: dev: print bitrate error with two decimal digits
can: raw: instantly reject unsupported CAN frames
can: add dummy_can driver
can: calc_bittiming: add can_calc_sample_point_pwm()
can: calc_bittiming: add can_calc_sample_point_nrz()
can: calc_bittiming: replace misleading "nominal" by "reference"
can: netlink: add PWM netlink interface
can: calc_bittiming: add PWM calculation
can: bittiming: add PWM validation
can: bittiming: add PWM parameters
...
====================
Link: https://patch.msgid.link/20251126120106.154635-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dt-bindings documentation of SPI NAND controller
for Airoha EN7523 SoC platform.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251125234047.1101985-3-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
debugfs access modes were added in Linux 5.10 (Dec 2020) [1], but the
no-mount mode has behaved effectively the same as the off mode since
Linux 5.12 (Apr 2021) [2]. The only difference is the specific error
code returned by the debugfs_create_* functions, which is -ENOENT in
no-mount mode and -EPERM in off mode.
Given that no-mount hasn't worked for several years with no complaints,
just remove it.
[1] a24c6f7bc923 ("debugfs: Add access restriction option")
[2] bc6de804d36b ("debugfs: be more robust at handling improper input in debugfs_lookup()")
56348560d495 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://patch.msgid.link/20251120102222.18371-3-dev@null.aaront.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fix commit converted several IPv4 address attributes from binary
to u32, but forgot to specify byte-order: big-endian. Without this,
YNL tools display IPv4 addresses incorrectly due to host-endian
interpretation.
Add the missing byte-order: big-endian to all affected u32 IPv4
address fields to ensure correct parsing and display.
Fixes: 1064d521d177 ("netlink: specs: support ipv4-or-v6 for dual-stack fields")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251125112048.37631-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Johan Hovold <johan@kernel.org>:
This series fixes device and OF node reference leaks during probe and
a clock prepare imbalance on probe failures.
Included is a related cleanup of an error path.
|
|
Based on ext4(5) and fs/ext4/ext4.h.
For INCOMPAT_ENCRYPT, it's possible to create a new filesystem with that
flag without creating any encrypted inodes. ext4(5) says it adds
"support" but doesn't say whether anything's actually present like
COMPAT_RESIZE_INODE does.
Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com>
Message-ID: <4506189.9SDvczpPoe@daniel-desktop3>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add kernel doc for drm_colorop objects.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-13-alex.hung@amd.com
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.
|
|
Add documentation for color pipeline API.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-4-alex.hung@amd.com
|
|
Add bindings documentation for i.MX91 thermal modules.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-imx91tmu-v7-1-48d7d9f25055@nxp.com
|
|
Add compatibility string for the thermal sensors on QCS8300 platform.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://patch.msgid.link/20250822042316.1762153-2-quic_gkohli@quicinc.com
|
|
Expose the current system-defined list of housekeeping CPUs in a new
sysfs file: /sys/devices/system/cpu/housekeeping.
This provides userspace performance tuning tools and resource managers
with a canonical, reliable method to accurately identify the cores
responsible for essential kernel maintenance workloads (RCU, timer
callbacks, and unbound workqueues). Currently, tooling must manually
calculate the housekeeping set by parsing complex kernel boot parameters
(like isolcpus= and nohz_full=) and system topology, which is prone to
error. This dedicated file simplifies the configuration of low-latency
workloads.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20251011012853.7539-2-atomlin@atomlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the RSPI controller on the Renesas RZ/V2N SoC. The block is
compatible with the RSPI implementation found on the RZ/V2H(P) family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251126131619.136605-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The CAN cores on Polarfire SoC both have a reset. The platform firmware
brings both cores out of reset, but the linux driver must use them
during normal operation. The resets should have been made required, but
this is one of the things that can happen when the binding is written
without driver support.
Fixes: c878d518d7b6 ("dt-bindings: can: mpfs: document the mpfs CAN controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251121-sample-footsore-743d81772efc@spud
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter
operating at a fixed 1MHz frequency. Thanks to its compare match
interrupt capability, the timer natively supports oneshot mode for tick
broadcast functionality.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251126060110.198330-2-haowen.ting@realtek.com
|
|
KVM SVM changes for 6.19:
- Fix a few missing "VMCB dirty" bugs.
- Fix the worst of KVM's lack of EFER.LMSLE emulation.
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
- Fix incorrect handling of selective CR0 writes when checking intercepts
during emulation of L2 instructions.
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
VMRUN and #VMEXIT.
- Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
interrupt if the guest patched the underlying code after the VM-Exit, e.g.
when Linux patches code with a temporary INT3.
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
userspace, and extend KVM "support" to all policy bits that don't require
any actual support from KVM.
|
|
The Oranth Tanix TX9 Pro is an Android STB using the Amlogic S912 chip
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250927125006.824293-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
KVM generic changes for 6.19:
- Use the recently-added WQ_PERCPU when creating the per-CPU workqueue for
irqfd cleanup.
- Fix a goof in the dirty ring documentation.
|
|
Translate .../scsi/wd719x.rst into Chinese.
Add wd719x into .../scsi/index.rst.
Update the translation through commit 40ee63091a40
("scsi: docs: convert wd719x.txt to ReST")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Translate .../scsi/libsas.rst into Chinese.
Add libsas into .../scsi/index.rst.
Update the translation through commit 25882c82f850
("scsi: libsas: Delete lldd_clear_aca callback")
Signed-off-by: Yujie Zhang <yjzhang@leap-io-kernel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Now sk->sk_timer is no longer used by TCP keepalive, we can use
its storage for TCP and MPTCP retransmit timers for better
cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Specify value size limit for BPF_MAP_TYPE_PERCPU_ARRAY which
is PCPU_MIN_UNIT_SIZE (32 kb). In percpu allocator (mm: percpu),
any request with a size greater than PCPU_MIN_UNIT_SIZE is rejected.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251115063531.2302903-1-alex.t.tran@gmail.com
|
|
Add "xunlong,orangepi-rv" as a StarFive JH7110 SoC-based board.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add device tree bindings for the StarFive JH7110S SoC
and the VisionFive 2 Lite board equipped with it.
JH7110S SoC is an industrial SoC which can run at -40~85 degrees centigrade
and up to 1.25GHz. Its CPU cores and peripherals are the same as
those of the JH7110 SoC.
VisionFive 2 Lite boards have MicroSD card version (default) and eMMC
version, which are called "VisionFive 2 Lite" and "VisionFive 2 Lite eMMC"
respectively.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Let's document how the new CPU system wakeup latency QoS limit can be used
from user space, along with how the constraint is taken into account for
s2idle and cpuidle.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-7-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The tsens IP found in the IPQ5018 SoC should not use qcom,tsens-v1 as
fallback since it has no RPM and, as such, must deviate from the
standard v1 init routine as this version of tsens needs to be explicitly
reset and enabled in the driver.
So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.
Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250818-ipq5018-tsens-fix-v1-1-0f08cf09182d@outlook.com
|
