| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d039f ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT Changes for v6.19:
- Fix the PCIe DBI memory region name
- Add ISP nodes for Amlogic C3
- Add power controller nodes for Amlogic S6/S7/S7D
- Add Pinctrl node for Amlogic A4
- Add AO Secure node for Amlogic S6/S7/S7D
- Add GPIO Interrupt node for Amlogic S6/S7/S7D
- Fix S922X cache layout
- New Boards:
- Tanix TX9 Pro
* tag 'amlogic-arm64-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c155a ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-5-b4d1fe4781c1@amlogic.com
[narmstrong: fixed applying on top as secure node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-4-b4d1fe4781c1@amlogic.com
[narmstrong: fixed applying on top of ao secure node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-3-b4d1fe4781c1@amlogic.com
[narmstrong: fixed applying on top of ao secure node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-5-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-4-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add node for board info registers, which allows getting SoC family and
board revision.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-3-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
DT incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must have
region for DWC controllers as it has the Root Port and controller specific
registers, while ELBI has optional registers.
Hence, fix the DT for both Meson platforms.
Cc: stable+noautosel@kernel.org # Driver dependency
Fixes: 5b3a9c20926e ("arm64: dts: meson-axg: add PCIe nodes")
Fixes: 1f8607d59763 ("arm64: dts: meson-g12a: Add PCIe node")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-2-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add pinctrl device to support Amlogic A5.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251022-a5-pinctrl-node-v4-1-a71911852c4b@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add power domain controller node for Amlogic S7D SoC.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250822-pm-s6-s7-s7d-v1-5-82e3f3aff327@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add power domain controller node for Amlogic S7 SoC.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250822-pm-s6-s7-s7d-v1-4-82e3f3aff327@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add power domain controller node for Amlogic S6 SoC.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250822-pm-s6-s7-s7d-v1-3-82e3f3aff327@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the IMX290 sensor node description to the device tree file,
which will be controlled via I2C bus with image data transmission
through MIPI CSI-2 interface.
Add CSI-2, adapter and ISP nodes for C3 family.
Signed-off-by: Keke Li <keke.li@amlogic.com>
Link: https://patch.msgid.link/20250918-b4-c3isp-v1-1-5f48db6516c9@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Oranth Tanix TX9 Pro is based on the Amlogic Q200 reference design with
an S912 chip and the following specs:
- 3GB DDR3 RAM
- 32GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.0a video
- VFD for clock/status
- 2x USB 2.0 ports
- IR receiver
- 1x Power LED (white)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250927125006.824293-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: QNAP TS233 (2-bay variant of the RK3568 NAS series) and
Asus Tinkerboard 3 + 3S.
Additional peripherals enabled on 100ASK DshanPi A1, Orange Pi 3B,
Indiedroid Nova, QNAP-TSx33 series + LED states on Radxa boards,
power-domains for the previously added RK3368 display components.
* tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
arm64: dts: rockchip: enable RTC for 100ASK DshanPi A1
arm64: dts: rockchip: enable USB for 100ASK DshanPi A1
arm64: dts: rockchip: enable button for 100ASK DshanPi A1
arm64: dts: rockchip: add mmc aliases for 100ASK DshanPi A1
arm64: dts: rockchip: remove mmc max-frequency for 100ASK DshanPi A1
arm64: dts: rockchip: Enable i2c2 on Orange Pi 3B
arm64: dts: rockchip: Use default-state for power LED for Radxa boards
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on 9Tripod X3568 v4
arm64: dts: rockchip: Add power-domain to RK3368 VOP controller
arm64: dts: rockchip: Add power-domain to RK3368 DSI controller
arm64: dts: rockchip: Add host wake pin for wifi on Indiedroid Nova
arm64: dts: rockchip: Correct pinctrl for pcie for Indiedroid Nova
arm64: dts: rockchip: Define regulator for pcie2x1l2 on Indiedroid Nova
arm64: dts: rockchip: Add clk32k_in for Indiedroid Nova
arm64: dts: rockchip: Add Asus Tinker Board 3 and 3S device tree
dt-bindings: arm: rockchip: Add Asus Tinker Board 3/3S
dt-bindings: arm: rockchip: merge Asus Tinker and Tinker S
arm64: dts: rockchip: add QNAP TS233 devicetree
dt-bindings: arm: rockchip: add TS233 to RK3568-based QNAP NAS devices
arm64: dts: rockchip: move common qnap tsx33 parts to dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The various "syscon" nodes in SC9860 are only referenced by clock
provider nodes in a 1:1 relationship, and nothing else references the
"syscon" nodes. There's no apparent reason for this split. The 2 nodes
can simply be merged into 1 node. The clock driver has supported using
either "reg" or "sprd,syscon" to access registers from the start, so
there shouldn't be any compatibility issues.
With this, DT schema warnings for missing a specific compatible with
"syscon" and non-MMIO devices on "simple-bus" are fixed.
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251124210031.767382-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable RTC support for the 100ASK DshanPi A1 board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20251120120011.279104-6-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable USB support for the 100ASK DshanPi A1 board.
Note that the HUSB311 Type-C chip is not supported.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20251120120011.279104-5-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The 100ASK DshanPi A1 board has three ADC buttons and one
GPIO button. Enable them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20251120120011.279104-4-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add missing MMC aliases for 100ASK DshanPi A1 board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20251120120011.279104-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The max-frequency property is already defined in the mmc
node of rk3576.dtsi. Remove the redundant definition.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251120120011.279104-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the "i2c2" bus on header pins 3 (I2C_SDA_M1)
and 5 (I2C2_SCL_M1) of the Orange Pi 3B board.
As documented on http://www.orangepi.org/img/pi3b/0719-pi3b-19.png,
such pins are the only ones offering I2C functionality
without conflicting with other SoC blocks.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Link: https://patch.msgid.link/20251120-orangepi3-enable-i2c2-v1-1-2e023a74012a@rootcommit.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18, 2nd round:
- Correct i.MX8DXL's pcie-ep interrupt number (Frank Li)
- Swap interrupt numbers of eqos for imx8dxl-ss-conn (Frank Li)
- Correct SAI3 interrupt line for i.MX6UL (Maarten Zanders)
- Correct mux-controller select/enable-gpios polarity for imx8qm-mek
board (Xu Yang)
* tag 'imx-fixes-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree support for the Black Sesame Technologies (BST) C1200
CDCU1.0 ADAS 4C2G platform. This platform is based on the BST C1200 SoC
family.
The changes include:
- Adding a new BST device tree directory
- Adding Makefile entries to build the BST platform device trees
- Adding the device tree for the BST C1200 CDCU1.0 ADAS 4C2G board
This board features a quad-core Cortex-A78 CPU, and various peripherals
including UART, and interrupt controller.
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19 part2
Late fixes and cleanups:
* Fix build warnings for unapplied overlays for PHYTEC, SA67 and certain TI EVM
* Fix pinmux of SD regulator control line on J721e SK
* Correct unit address of cbass_wakeup node for AM62L
* tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-am62l: Fix unit address of cbass_wakeup
arm64: dts: ti: k3-j721e-sk: Fix pinmux for pin Y1 used by power regulator
arm64: dts: ti: Add missing applied DT overlay targets
arm64: dts: ti: sa67: add build time dtb for overlays
arm64: dts: ti: Enable build testing of PHYTEC board overlays
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.19 (part 1)
pinctrl node names cleanup from Rob on Marvell device tree files
Proper fix for pci errors on armada cp11x based platforms
* tag 'mvebu-dt64-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
clk: mvebu: cp110 add CLK_IGNORE_UNUSED to pcie_x10, pcie_x11 & pcie_x4
Revert "arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports"
arm64/arm: dts: marvell: Rename "nand-rb" pinctrl node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
CIX device tree changes for v6.19-rc1, add below new components support:
- PCIe
- Pinctrl
- SPI
* tag 'cix-dt-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
arm64: dts: cix: add a compatible string for the cix sky1 SoC
arm64: dts: cix: Enable PCIe on the Orion O6 board
arm64: dts: cix: Add PCIe Root Complex on sky1
arm64: dts: cix: Add pinctrl nodes for sky1
arm64: dts: cix: add DT nodes for SPI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.19, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- Add and enable the ARM SMC watchdog to use IWDG1 in the secure
world.
- STMP32MP15:
- Phytec SOM: Fix STMPE811 touchscreen
- LXA: drop unnecessary vusb_d/a-supply as already defined by
"phy-supply" and "vdda1v8-supply".
- STM32MP23:
- Use the RIFSC as an access controler (firewall) as it is done
for STM32MP25 and STM32MP23.
- STM32MP25:
- Add OSPI memory region name.
- Add I/O synchronization properties to satisfy RGMII
specification.
* tag 'stm32-dt-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: set RIFSC as an access controller on stm32mp21x platforms
ARM: dts: stm32: add the IWDG2 interrupt line in stm32mp131.dtsi
ARM: dts: stm32: enable the ARM SMC watchdog node in stm32mp135f-dk
ARM: dts: stm32: add the ARM SMC watchdog in stm32mp131.dtsi
ARM: dts: stm32: add iwdg1 node in stm32mp131.dtsi
arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add memory-region-names property for stm32mp257f-ev1
ARM: dts: stm32: lxa: drop unnecessary vusb_d/a-supply
ARM: dts: stm32: stm32mp157c-phycore: Fix STMPE811 touchscreen node properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: 9Tripod X3568, 100ASK DShanPi A1, LinkEase EasePi R1,
FriendlyElec NanoPi R76S
Interesting archeological addition: RK3368 (2015) gets display
output afterall.
New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
* tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (43 commits)
arm64: dts: rockchip: add vicap node to rk356x
arm64: dts: rockchip: add the vip node to px30
arm64: dts: rockchip: fixes audio for 100ASK DshanPi A1
arm64: dts: rockchip: fixes vcc3v3_s0 supply for 100ASK DshanPi A1
arm64: dts: rockchip: fixes ethernet for 100ASK DshanPi A1
arm64: dts: rockchip: fixes regulator for 100ASK DshanPi A1
arm64: dts: rockchip: correct assigned-clock-rates spelling on 2 boards
arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
arm64: dts: rockchip: add eMMC CQE support for rk3588
arm64: dts: rockchip: enable HDMI audio on Rock 5 ITX
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A
arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK 5A
arm64: dts: rockchip: use SCMI clock id for gpu clock on rk356x
arm64: dts: rockchip: Remove sdmmc max-frequency on RK3588S EVB1 board
arm64: dts: rockchip: Remove sdmmc max-frequency for Radxa ROCK 5 ITX/5B/5B+/5T
arm64: dts: rockchip: Switch microSD card detect to gpio on Radxa ROCK 5 ITX/5C
arm64: dts: rockchip: Add devicetree for the 9Tripod X3568 v4
dt-bindings: arm: rockchip: Add 9Tripod X3568 series
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.19
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19
Generic fixes and cleanups:
* Multiple SoCs: Disable CPSW in SoC files and
enable them in board files for better board-level control
* Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards
New Boards/SoM:
* AM62L SoC and basic support for EVM
* Toradex Aquila AM69 board support
* Kontron SMARC-sAM67 module and ADS2 carrier board support
Platform wide:
* Define possible system states amd wakeup-source (AM62/AM62A/AM62P)
SoC/EVM specific changes:
AM62:
* Add RNG node
* Add OLDI support
AM62P:
* Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main)
* Fix memory ranges for GPU
AM62D2:
* Enable PMIC support on EVM
* Misc fixes
AM64:
* Add DMA support for TSCADC on EVM
AM69:
* Add Aquila board support with Clover variant
J722S:
* Fix audio refclk source in main dtsi
* Explicitly use PLL1_HSDIV6 audio refclk for EVM
J784S4/J742S2:
* Add bootph-all tag to support PCIe boot
Variscite VAR-SOM-AM62P:
* Add support for ADS7846 touchscreen
* Add support for WM8904 audio codec
* tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (42 commits)
arm64: dts: ti: k3-am62l: add initial reference board file
arm64: dts: ti: k3-am62l: add initial infrastructure
dt-bindings: arm: ti: Add binding for AM62L SoCs
arm64: dts: ti: am69-aquila: Add Clover
arm64: dts: ti: Add Aquila AM69 Support
dt-bindings: arm: ti: add Toradex Aquila AM69
arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files
arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file
arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am65: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am62: disable "cpsw3g" in SoC file and enable in board file
arm64: dts: ti: k3-am62p5-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62a7-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62-lp-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62p: Define possible system states
arm64: dts: ti: k3-am62a: Define possible system states
arm64: dts: ti: k3-am62: Define possible system states
arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here
arm64: dts: ti: k3-*: Replace rgmii-rxid with rgmii-id for CPSW ports
arm64: dts: ti: k3-am642-tqma64xxl: add boot phase tags
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5)
- Agilex5 updates:
- Add GMAC0 for NAND daughter card
- Add SMMU support
- Add VGIC maintenance interrupt
- Add L2 and L3 cache
- Add support for the 013b board
- Add I3C support
- Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5
- Add support for Agilex3 board(a variant of the Agilex5 board)
- dt-bindings update:
- Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5
- Document Enclustra Mercury SA1 and AA1 boards
- Document Agilex5 013b board
- Document Agilex3 board
- Fix dtbs_check warnings:
- stratix10-swvp
- Agilex(NAND and Clock manager)
- Move sdmmc-ecc to base DTSI file(Stratix10)
* tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits)
arm64: dts: socfpga: agilex5: update qspi partitions for 013b board
arm64: dts: socfpga: add Agilex3 board
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers
arm64: dts: socfpga: Add Agilex5 SVC node with memory region
dt-bindings: firmware: svc: Add IOMMU support for Agilex5
arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes
arm64: dts: socfpga: agilex5: Add L2 and L3 cache
arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND
arm64: dts: socfpga: agilex5: add support for 013b board
dt-bindings: intel: Add Agilex5 SoCFPGA 013b board
arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt
arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND
arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager
arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp
arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file
ARM: dts: socfpga: add Enclustra SoM dts files
dt-bindings: altera: removal of generic PE1 dts
ARM: dts: socfpga: removal of generic PE1 dts
dt-bindings: altera: add Mercury AA1 variants
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.19:
- New board support: Protonic PRT8ML, Toradex SMARC iMX95, Skov Rev.C
HDMI, i.MX 95 Verdin Evaluation KitPHYTEC phyBOARD-Segin-i.MX91 board,
Skov i.MX8MP variant
- A series from Alexander Stein to clean up and improve imx95-tqma9596sa
board support
- Add MicIn routing support for mba8mx boards
- A couple of patch sets from Frank Li to clean up dt-schema warnings
and add more device support for imx8dxl and imx8qxp boards
- A series from Ioana Ciornei to add FPGA based GPIO controller and SFP+
cages for layerscape boards
- A change from Jan Petrous to add GMAC Ethernet for S32G2 EVB, RDB2 and
S32G3 RDB3 boards
- A series from Markus Niebel to improve imx95-tqma9596sa board support
- A couple of changes from Martin Kepplinger-Novaković to enable cpuidle
cooling device support for imx8mp
- A series from Max Krummenacher to clean up todo and add thermal
support for imx8-apalis board
- A series from Primoz Fiser to add USB vbus regulators, jtag and
pwm-fan overlay for imx93-phyboard
- A couple of series from Richard Zhu to add supports-clkreq property
and vpcie3v3aux regulator for PCIe M.2 device
- A series from Stefano Radaelli to add WiFi, BT, PMIC, WM8904 audio,
and ADS7846 touchscreen support for imx93-var-som
- A series from Tim Harvey to make some cleanups for imx8mm-venice
boards
- A change from Xu Yang to add DDR Perf Monitor support for i.MX94
- Other small and random changes
* tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (122 commits)
arm64: dts: freescale: add Toradex SMARC iMX95
arm64: dts: freescale: tqma9352: Add vcc-supply for spi-nor
arm64: dts: mb-smarc-2: Add MicIn routing
arm64: dts: mba8xx: Add MicIn routing
arm64: dts: mba8mx: Add MicIn routing
arm64: dts: imx8mp: make 'dsp' node depend on 'aips5'
arm64: dts: imx8mp: convert 'aips5' to 'aipstz5'
arm64: dts: imx8mp-skov: add Rev.C HDMI support
arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2
arm64: dts: freescale: Add GMAC Ethernet for S32G2 EVB and RDB2 and S32G3 RDB3
arm64: dts: imx8qm-apalis: add pwm used by the backlight
arm64: dts: imx95-tqma9596sa-mb-smarc-2: add aliases for SPI
arm64: dts: imx95-tqma9596sa-mb-smarc-2: remove superfluous line
arm64: dts: imx95-tqma9596sa-mb-smarc-2: mark LPUART1 as reserved
arm64: dts: imx95-tqma9596sa-mb-smarc-2: Add MicIn routing
arm64: dts: imx95-tqma9596sa: add EEPROM pagesize
arm64: dts: imx95-tqma9596sa: whitespace fixes
arm64: dts: imx95-tqma9596sa: add gpio bus recovery for i2c
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for usdhci
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for i2c
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.19
The A523 family gains support for I2S and SPDIF audio interfaces, as
well as the GMAC200 Ethernet controller.
The H616 gains support for the NAND controller.
* tag 'sunxi-dt-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a523: Add SPDIF TX pin on PB and PI pins
arm64: dts: allwinner: a523: Add I2S2 pins on PI pin group
arm64: dts: allwinner: a523: Add device nodes for I2S controllers
arm64: dts: allwinner: a523: Add device node for SPDIF block
arm64: dts: allwinner: a523: Add DMA controller device nodes
dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatibles for A523
arm64: dts: allwinner: h616: add NAND controller
arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port
arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port
arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port
arm64: dts: allwinner: a523: Add GMAC200 ethernet controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.19-rc1
This contains a bunch of additions and improvements for older devices.
Tegra210 devices now have empty reserved-memory nodes to improve inter-
operability with certain bootloaders. These chips now also support more
multimedia engines. A new variant of the Jetson Nano is also added.
Jetson TX2 sees some improvements. PCI endpoint mode is improved for
Tegra234 so that reset interrupts are properly routed.
A new RTC device is added starting with Orin.
Rounding things off is a flurry of small fixes for DT validation and USB
OTG mode.
* tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX
arm64: tegra: Set USB Micro-B port to OTG mode on P3450
arm64: tegra: Add NVJPG node for Tegra210 platforms
arm64: tegra: Add Tegra210 NVJPG power-domain node
arm64: tegra: Add interrupts for Tegra234 USB wake events
arm64: tegra: Add reserved-memory node for P2180
arm64: tegra: Add reserved-memory node for P3450
arm64: tegra: Enable NVDEC and NVENC on Tegra210
arm64: tegra: Fix APB DMA controller node name
arm64: tegra: Add default GIC address cells on Tegra210
arm64: tegra: Add default GIC address cells on Tegra194
arm64: tegra: Add default GIC address cells on Tegra186
arm64: tegra: Add default GIC address cells on Tegra132
arm64: tegra: Add OPP tables on Tegra210
arm64: tegra: Add interconnect properties for Tegra210
arm64: tegra: Add ACTMON on Tegra210
arm64: tegra: Add device-tree node for NVVRS RTC
arm64: tegra: Move avdd-dsi-csi-supply into CSI node
arm64: tegra: Drop redundant clock and reset names from TSEC node
arm64: tegra: Move HDA into the correct bus
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
* tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC
arm64: dts: renesas: r9a09g057: Add RTC node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: r9a09g057: Add TSU nodes
ARM: dts: renesas: r9a06g032: Add the ADC device
arm64: dts: renesas: r9a09g087: Add GMAC nodes
arm64: dts: renesas: r9a09g077: Add GMAC nodes
arm64: dts: renesas: r9a09g087: Add ETHSS node
arm64: dts: renesas: r9a09g077: Add ETHSS node
arm64: dts: renesas: r8a779a0: Add GE7800 GPU node
arm64: dts: renesas: r8a77965: Add GE7800 GPU node
dt-bindings: clock: r8a779a0: Add ZG core clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
* tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (27 commits)
arm64: dts: mediatek: mt7981b-openwrt-one: Enable software leds
arm64: dts: mediatek: mt7981b-openwrt-one: Enable SPI NOR
arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays
arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays
arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro
arm64: dts: mediatek: mt7988: Disable 2.5G phy and enable at board layer
dt-bindings: arm: mediatek: add BPI-R4 Pro board
arm64: dts: mediatek: Add GCE header for MT8196
arm64: dts: mediatek: mt7981b: Add reserved memory for TF-A
arm64: dts: mediatek: mt7981b: Configure UART0 pinmux
arm64: dts: mediatek: mt8365-evk: Enable GPU support
arm64: dts: mediatek: mt8365: Add GPU support
arm64: dts: mediatek: mt8395-genio-1200-evk: Describe CPU supplies
arm64: dts: mediatek: Add MT6878 pinmux macro header file
arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speed
arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510
arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuse
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
* tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: enable display panel support
arm64: dts: exynos7870-a2corelte: enable display panel support
arm64: dts: exynos7870-on7xelte: enable display panel support
arm64: dts: exynos7870: add DSI support
arm64: dts: exynos: gs101: fix sysreg_apm reg property
arm64: dts: exynos: gs101: fix clock module unit reg sizes
arm64: dts: exynos: gs101: add sysreg_misc and sysreg_hsi0 nodes
arm64: dts: exynos: gs101: add OPPs
arm64: dts: exynos: gs101: add CPU clocks
arm64: dts: exynos: gs101: add #clock-cells to the ACPM protocol node
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
arm64: dts: exynos: gs101-pixel-common: add node for s2mpg10 / clock
arm64: dts: exynos990: Add sysreg nodes for PERIC0 and PERIC1
arm64: dts: exynosautov920: add CMU_MFC clock DT nodes
arm64: dts: exynosautov920: add CMU_M2M clock DT nodes
arm64: dts: exynos7870-on7xelte: add bus-width to mmc0 node
arm64: dts: exynos7870-j6lte: add bus-width to mmc0 node
arm64: dts: exynos7870-a2corelte: add bus-width to mmc0 node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (80 commits)
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
arm64: dts: renesas: r8a77961: Add GX6250 GPU node
arm64: dts: renesas: r8a77960: Add GX6250 GPU node
ARM: dts: renesas: kzm9g: Name interrupts for accelerometer
arm64: dts: renesas: r9a09g087: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g077: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g056: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g057: Add Cortex-A55 PMU node
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
arm64: dts: renesas: v3msk: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add SWDT node
arm64: dts: renesas: r8a779g0: Add SWDT node
arm64: dts: renesas: r8a779f0: Add SWDT node
arm64: dts: renesas: r8a779a0: Add SWDT node
arm64: dts: renesas: rzt2h/rzn2h-evk: Enable ADCs
arm64: dts: renesas: r9a09g087: Add ADCs support
arm64: dts: renesas: r9a09g077: Add ADCs support
ARM: dts: renesas: koelsch: Update ADV7180 binding
ARM: dts: renesas: r9a06g032: Move interrupt-parent to root node
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
PXA1908 DT changes for 6.19
Rollup of hardware support which has accumulated since support for the
SoC and coreprimevelte board was merged. This most notably includes
eMMC, PMIC, backlight and touchscreen. A few QoL fixes are also
included.
* tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux:
arm64: dts: marvell: pxa1908: Add power domains
arm64: dts: marvell: samsung,coreprimevelte: Add USB connector
arm64: dts: marvell: samsung,coreprimevelte: Fill in memory node
arm64: dts: marvell: samsung,coreprimevelte: Drop some reserved memory
arm64: dts: marvell: pxa1908: Move ramoops to SoC dtsi
arm64: dts: marvell: samsung,coreprimevelte: Add vibrator
arm64: dts: marvell: pxa1908: Add PWMs
arm64: dts: marvell: samsung,coreprimevelte: Enable eMMC
arm64: dts: marvell: samsung,coreprimevelte: Correct CD GPIO
arm64: dts: marvell: samsung,coreprimevelte: Add backlight
arm64: dts: samsung,coreprimevelte: add SDIO
arm64: dts: samsung,coreprimevelte: add touchscreen
arm64: dts: samsung,coreprimevelte: add PMIC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the following warning with W=1:
arch/arm64/boot/dts/ti/k3-am62l.dtsi:101.30-112.5: Warning (simple_bus_reg): /bus@f0000/bus@43000000: simple-bus unit address format error, expected "a80000"
While at that, also remove extra space b/w label and node name.
Fixes: 5f016758b0ab ("arm64: dts: ti: k3-am62l: add initial infrastructure")
Link: https://patch.msgid.link/20251120143419.223238-1-vigneshr@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The SoC pin Y1 is incorrectly defined in the WKUP Pinmux device-tree node
(pinctrl@4301c000) leading to the following silent failure:
pinctrl-single 4301c000.pinctrl: mux offset out of range: 0x1dc (0x178)
According to the datasheet for the J721E SoC [0], the pin Y1 belongs to the
MAIN Pinmux device-tree node (pinctrl@11c000). This is confirmed by the
address of the pinmux register for it on page 142 of the datasheet which is
0x00011C1DC.
Hence fix it.
[0]: https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: 97b67cc102dc ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://patch.msgid.link/20251119160148.2752616-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add the missing TI overlays. Some of the TI overlays have the first part
needed (a "*-dtbs" variable), but not the second part adding the target to
dtb-y/dtb- variable.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[vigneshr@ti.com: create new target for J721e GESI EVM]
Link: https://patch.msgid.link/20251120141936.190796-1-vigneshr@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Currently, on Radxa boards, the power LED is turned on immediately
after power-up, independent of software control. The heartbeat LED and
other available LEDs are subsequently turned on by the initial
software, such as U-Boot, to indicate software is running.
However, the device tree description for this behavior is inconsistent
and fragmented, with definitions split between the main Linux DTS
files and separate U-Boot files (u-boot/arch/arm/dts/*-u-boot.dtsi).
This patch addresses the inconsistency for the power LED by using
default-state = "on" instead of linux,default-trigger = "default-on".
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20251113124222.4691-2-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
