| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
"Apart from the usual small churn, we have
- initial SMP support (only kernel)
- major vDSO cleanups (and fixes for 32-bit)"
* tag 'uml-for-linux-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (33 commits)
um: Disable KASAN_INLINE when STATIC_LINK is selected
um: Don't rename vmap to kernel_vmap
um: drivers: virtio: use string choices helper
um: Always set up AT_HWCAP and AT_PLATFORM
x86/um: Remove FIXADDR_USER_START and FIXADDR_USE_END
um: Remove __access_ok_vsyscall()
um: Remove redundant range check from __access_ok_vsyscall()
um: Remove fixaddr_user_init()
x86/um: Drop gate area handling
x86/um: Do not inherit vDSO from host
um: Split out default elf_aux_hwcap
x86/um: Move ELF_PLATFORM fallback to x86-specific code
um: Split out default elf_aux_platform
um: Avoid circular dependency on asm-offsets in pgtable.h
um: Enable SMP support on x86
asm-generic: percpu: Add assembly guard
um: vdso: Remove getcpu support on x86
um: Add initial SMP support
um: Define timers on a per-CPU basis
um: Determine sleep based on need_resched()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull AES-GCM optimizations from Eric Biggers:
"More optimizations and cleanups for the x86_64 AES-GCM code:
- Add a VAES+AVX2 optimized implementation of AES-GCM. This is very
helpful on CPUs that have VAES but not AVX512, such as AMD Zen 3.
- Make the VAES+AVX512 optimized implementation of AES-GCM handle
large amounts of associated data efficiently.
- Remove the "avx10_256" implementation of AES-GCM. It's superseded
by the VAES+AVX2 optimized implementation.
- Rename the "avx10_512" implementation to "avx512"
Overall, this fills in a gap where AES-GCM wasn't fully optimized on
some recent CPUs. It also drops code that won't be as useful as
initially expected due to AVX10/256 being dropped from the AVX10 spec"
* tag 'aes-gcm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: x86/aes-gcm-vaes-avx2 - initialize full %rax return register
crypto: x86/aes-gcm - optimize long AAD processing with AVX512
crypto: x86/aes-gcm - optimize AVX512 precomputation of H^2 from H^1
crypto: x86/aes-gcm - revise some comments in AVX512 code
crypto: x86/aes-gcm - reorder AVX512 precompute and aad_update functions
crypto: x86/aes-gcm - clean up AVX512 code to assume 512-bit vectors
crypto: x86/aes-gcm - rename avx10 and avx10_512 to avx512
crypto: x86/aes-gcm - remove VAES+AVX10/256 optimized code
crypto: x86/aes-gcm - add VAES+AVX2 optimized code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Dave Hansen:
"The biggest thing of note here is Linear Address Space Separation
(LASS). It represents the first time I can think of that the
upper=>kernel/lower=>user address space convention is actually
recognized by the hardware on x86. It ensures that userspace can not
even get the hardware to _start_ page walks for the kernel address
space. This, of course, is a really nice generic side channel defense.
This is really only a down payment on LASS support. There are still
some details to work out in its interaction with EFI calls and
vsyscall emulation. For now, LASS is disabled if either of those
features is compiled in (which is almost always the case).
There's also one straggler commit in here which converts an
under-utilized AMD CPU feature leaf into a generic Linux-defined leaf
so more feature can be packed in there.
Summary:
- Enable Linear Address Space Separation (LASS)
- Change X86_FEATURE leaf 17 from an AMD leaf to Linux-defined"
* tag 'x86_cpu_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable LASS during CPU initialization
selftests/x86: Update the negative vsyscall tests to expect a #GP
x86/traps: Communicate a LASS violation in #GP message
x86/kexec: Disable LASS during relocate kernel
x86/alternatives: Disable LASS when patching kernel code
x86/asm: Introduce inline memcpy and memset
x86/cpu: Add an LASS dependency on SMAP
x86/cpufeatures: Enumerate the LASS feature bits
x86/cpufeatures: Make X86_FEATURE leaf 17 Linux-specific
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry update from Dave Hansen:
"This one is pretty trivial: fix a badly-named FRED data structure
member"
* tag 'x86_entry_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix 64bit identifier in fred_ss
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The most significant are some changes to ensure that symbols exported
for KVM are used only by KVM modules themselves, along with some
related cleanups.
In true x86/misc fashion, the other patch is completely unrelated and
just enhances an existing pr_warn() to make it clear to users how they
have tainted their kernel when something is mucking with MSRs.
Summary:
- Make MSR-induced taint easier for users to track down
- Restrict KVM-specific exports to KVM itself"
* tag 'x86_misc_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Restrict KVM-induced symbol exports to KVM modules where obvious/possible
x86/mm: Drop unnecessary export of "ptdump_walk_pgd_level_debugfs"
x86/mtrr: Drop unnecessary export of "mtrr_state"
x86/bugs: Drop unnecessary export of "x86_spec_ctrl_base"
x86/msr: Add CPU_OUT_OF_SPEC taint name to "unrecognized" pr_warn(msg)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave HansenL
"The main content here is adding support for the new EUPDATESVN SGX
ISA. Before this, folks who updated microcode had to reboot before
enclaves could attest to the new microcode. The new functionality lets
them do this without a reboot.
The rest are some nice, but relatively mundane comment and kernel-doc
fixups.
Summary:
- Allow security version (SVN) updates so enclaves can attest to new
microcode
- Fix kernel docs typos"
* tag 'x86_sgx_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Fix a typo in the kernel-doc comment for enum sgx_attribute
x86/sgx: Remove superfluous asterisk from copyright comment in asm/sgx.h
x86/sgx: Document structs and enums with '@', not '%'
x86/sgx: Add kernel-doc descriptions for params passed to vDSO user handler
x86/sgx: Add a missing colon in kernel-doc markup for "struct sgx_enclave_run"
x86/sgx: Enable automatic SVN updates for SGX enclaves
x86/sgx: Implement ENCLS[EUPDATESVN]
x86/sgx: Define error codes for use by ENCLS[EUPDATESVN]
x86/cpufeatures: Add X86_FEATURE_SGX_EUPDATESVN feature flag
x86/sgx: Introduce functions to count the sgx_(vepc_)open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Use the proper accessors when reading CR3 as part of the page level
transitions (5-level to 4-level, the use case being kexec) so that
only the physical address in CR3 is picked up and not flags which are
above the physical mask shift
- Clean up and unify __phys_addr_symbol() definitions
* tag 'x86_mm_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Fix page table access in 5-level to 4-level paging transition
x86/boot: Fix page table access in 5-level to 4-level paging transition
x86/mm: Unify __phys_addr_symbol()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU mitigation updates from Borislav Petkov:
- Convert the tsx= cmdline parsing to use early_param()
- Cleanup forward declarations gunk in bugs.c
* tag 'x86_bugs_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Get rid of the forward declarations
x86/tsx: Get the tsx= command line parameter with early_param()
x86/tsx: Make tsx_ctrl_state static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Largely cleanups along with a change to save XSS to the GHCB
(Guest-Host Communication Block) in SEV-ES guests so that the
hypervisor can determine the guest's XSAVES buffer size properly
and thus support shadow stacks in AMD confidential guests
* tag 'x86_sev_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cc: Fix enum spelling to fix kernel-doc warnings
x86/boot: Drop unused sev_enable() fallback
x86/coco/sev: Convert has_cpuflag() to use cpu_feature_enabled()
x86/sev: Include XSS value in GHCB CPUID request
x86/boot: Move boot_*msr helpers to asm/shared/msr.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The mandatory pile of cleanups the cat drags in every merge window
* tag 'x86_cleanups_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Clean up whitespace in a20.c
x86/mm: Delete disabled debug code
x86/{boot,mtrr}: Remove unused function declarations
x86/percpu: Use BIT_WORD() and BIT_MASK() macros
x86/cpufeatures: Correct LKGS feature flag description
x86/idtentry: Add missing '*' to kernel-doc lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for AMD's Smart Data Cache Injection feature which allows
for direct insertion of data from I/O devices into the L3 cache, thus
bypassing DRAM and saving its bandwidth; the resctrl side of the
feature allows the size of the L3 used for data injection to be
controlled
- Add Intel Clearwater Forest to the list of CPUs which support
Sub-NUMA clustering
- Other fixes and cleanups
* tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Update bit_usage to reflect io_alloc
fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks
fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID
fs/resctrl: Introduce interface to display io_alloc CBMs
fs/resctrl: Add user interface to enable/disable io_alloc feature
fs/resctrl: Introduce interface to display "io_alloc" support
x86,fs/resctrl: Implement "io_alloc" enable/disable handlers
x86,fs/resctrl: Detect io_alloc feature
x86/resctrl: Add SDCIAE feature in the command line options
x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement
fs/resctrl: Consider sparse masks when initializing new group's allocation
x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
- Add microcode staging support on Intel: it moves the sole microcode
blobs loading to a non-critical path so that microcode loading
latencies are kept at minimum. The actual "directing" the hardware to
load microcode is the only step which is done on the critical path.
This scheme is also opportunistic as in: on a failure, the machinery
falls back to normal loading
- Add the capability to the AMD side of the loader to select one of two
per-family/model/stepping patches: one is pre-Entrysign and the other
is post-Entrysign; with the goal to take care of machines which
haven't updated their BIOS yet - something they should absolutely do
as this is the only proper Entrysign fix
- Other small cleanups and fixlets
* tag 'x86_microcode_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Mark early_parse_cmdline() as __init
x86/microcode/AMD: Select which microcode patch to load
x86/microcode/intel: Enable staging when available
x86/microcode/intel: Support mailbox transfer
x86/microcode/intel: Implement staging handler
x86/microcode/intel: Define staging state struct
x86/microcode/intel: Establish staging control logic
x86/microcode: Introduce staging step to reduce late-loading time
x86/cpu/topology: Make primary thread mask available with SMP=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- The second part of the AMD MCA interrupts rework after the
last-minute show-stopper from the last merge window was sorted out.
After this, the AMD MCA deferred errors, thresholding and corrected
errors interrupt handlers use common MCA code and are tightly
integrated into the core MCA code, thereby getting rid of
considerable duplication. All culminating into allowing CMCI error
thresholding storms to be detected at AMD too, using the common
infrastructure
- Add support for two new MCA bank bits on AMD Zen6 which denote
whether the error address logged is a system physical address, which
obviates the need for it to be translated before further error
recovery can be done
* tag 'ras_core_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Handle AMD threshold interrupt storms
x86/mce: Do not clear bank's poll bit in mce_poll_banks on AMD SMCA systems
x86/mce: Add support for physical address valid bit
x86/mce: Save and use APEI corrected threshold limit
x86/mce/amd: Define threshold restart function for banks
x86/mce/amd: Remove redundant reset_block()
x86/mce/amd: Support SMCA Corrected Error Interrupt
x86/mce/amd: Enable interrupt vectors once per-CPU on SMCA systems
x86/mce: Unify AMD DFR handler with MCA Polling
x86/mce: Unify AMD THR handler with MCA Polling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"A large overhaul of the restartable sequences and CID management:
The recent enablement of RSEQ in glibc resulted in regressions which
are caused by the related overhead. It turned out that the decision to
invoke the exit to user work was not really a decision. More or less
each context switch caused that. There is a long list of small issues
which sums up nicely and results in a 3-4% regression in I/O
benchmarks.
The other detail which caused issues due to extra work in context
switch and task migration is the CID (memory context ID) management.
It also requires to use a task work to consolidate the CID space,
which is executed in the context of an arbitrary task and results in
sporadic uncontrolled exit latencies.
The rewrite addresses this by:
- Removing deprecated and long unsupported functionality
- Moving the related data into dedicated data structures which are
optimized for fast path processing.
- Caching values so actual decisions can be made
- Replacing the current implementation with a optimized inlined
variant.
- Separating fast and slow path for architectures which use the
generic entry code, so that only fault and error handling goes into
the TIF_NOTIFY_RESUME handler.
- Rewriting the CID management so that it becomes mostly invisible in
the context switch path. That moves the work of switching modes
into the fork/exit path, which is a reasonable tradeoff. That work
is only required when a process creates more threads than the
cpuset it is allowed to run on or when enough threads exit after
that. An artificial thread pool benchmarks which triggers this did
not degrade, it actually improved significantly.
The main effect in migration heavy scenarios is that runqueue lock
held time and therefore contention goes down significantly"
* tag 'core-rseq-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/mmcid: Switch over to the new mechanism
sched/mmcid: Implement deferred mode change
irqwork: Move data struct to a types header
sched/mmcid: Provide CID ownership mode fixup functions
sched/mmcid: Provide new scheduler CID mechanism
sched/mmcid: Introduce per task/CPU ownership infrastructure
sched/mmcid: Serialize sched_mm_cid_fork()/exit() with a mutex
sched/mmcid: Provide precomputed maximal value
sched/mmcid: Move initialization out of line
signal: Move MMCID exit out of sighand lock
sched/mmcid: Convert mm CID mask to a bitmap
cpumask: Cache num_possible_cpus()
sched/mmcid: Use cpumask_weighted_or()
cpumask: Introduce cpumask_weighted_or()
sched/mmcid: Prevent pointless work in mm_update_cpus_allowed()
sched/mmcid: Move scheduler code out of global header
sched: Fixup whitespace damage
sched/mmcid: Cacheline align MM CID storage
sched/mmcid: Use proper data structures
sched/mmcid: Revert the complex CID management
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scoped user access updates from Thomas Gleixner:
"Scoped user mode access and related changes:
- Implement the missing u64 user access function on ARM when
CONFIG_CPU_SPECTRE=n.
This makes it possible to access a 64bit value in generic code with
[unsafe_]get_user(). All other architectures and ARM variants
provide the relevant accessors already.
- Ensure that ASM GOTO jump label usage in the user mode access
helpers always goes through a local C scope label indirection
inside the helpers.
This is required because compilers are not supporting that a ASM
GOTO target leaves a auto cleanup scope. GCC silently fails to emit
the cleanup invocation and CLANG fails the build.
[ Editor's note: gcc-16 will have fixed the code generation issue
in commit f68fe3ddda4 ("eh: Invoke cleanups/destructors in asm
goto jumps [PR122835]"). But we obviously have to deal with clang
and older versions of gcc, so.. - Linus ]
This provides generic wrapper macros and the conversion of affected
architecture code to use them.
- Scoped user mode access with auto cleanup
Access to user mode memory can be required in hot code paths, but
if it has to be done with user controlled pointers, the access is
shielded with a speculation barrier, so that the CPU cannot
speculate around the address range check. Those speculation
barriers impact performance quite significantly.
This cost can be avoided by "masking" the provided pointer so it is
guaranteed to be in the valid user memory access range and
otherwise to point to a guaranteed unpopulated address space. This
has to be done without branches so it creates an address dependency
for the access, which the CPU cannot speculate ahead.
This results in repeating and error prone programming patterns:
if (can_do_masked_user_access())
from = masked_user_read_access_begin((from));
else if (!user_read_access_begin(from, sizeof(*from)))
return -EFAULT;
unsafe_get_user(val, from, Efault);
user_read_access_end();
return 0;
Efault:
user_read_access_end();
return -EFAULT;
which can be replaced with scopes and automatic cleanup:
scoped_user_read_access(from, Efault)
unsafe_get_user(val, from, Efault);
return 0;
Efault:
return -EFAULT;
- Convert code which implements the above pattern over to
scope_user.*.access(). This also corrects a couple of imbalanced
masked_*_begin() instances which are harmless on most
architectures, but prevent PowerPC from implementing the masking
optimization.
- Add a missing speculation barrier in copy_from_user_iter()"
* tag 'core-uaccess-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/strn*,uaccess: Use masked_user_{read/write}_access_begin when required
scm: Convert put_cmsg() to scoped user access
iov_iter: Add missing speculation barrier to copy_from_user_iter()
iov_iter: Convert copy_from_user_iter() to masked user access
select: Convert to scoped user access
x86/futex: Convert to scoped user access
futex: Convert to get/put_user_inline()
uaccess: Provide put/get_user_inline()
uaccess: Provide scoped user access regions
arm64: uaccess: Use unsafe wrappers for ASM GOTO
s390/uaccess: Use unsafe wrappers for ASM GOTO
riscv/uaccess: Use unsafe wrappers for ASM GOTO
powerpc/uaccess: Use unsafe wrappers for ASM GOTO
x86/uaccess: Use unsafe wrappers for ASM GOTO
uaccess: Provide ASM GOTO safe wrappers for unsafe_*_user()
ARM: uaccess: Implement missing __get_user_asm_dword()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull bug handling infrastructure updates from Ingo Molnar:
"Core updates:
- Improve WARN(), which has vararg printf like arguments, to work
with the x86 #UD based WARN-optimizing infrastructure by hiding the
format in the bug_table and replacing this first argument with the
address of the bug-table entry, while making the actual function
that's called a UD1 instruction (Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch (Ingo
Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS (Peter
Zijlstra)"
* tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
x86/bug: Fix BUG_FORMAT vs KASLR
x86_64/bug: Inline the UD1
x86/bug: Implement WARN_ONCE()
x86_64/bug: Implement __WARN_printf()
x86/bug: Use BUG_FORMAT for DEBUG_BUGVERBOSE_DETAILED
x86/bug: Add BUG_FORMAT basics
bug: Allow architectures to provide __WARN_printf()
bug: Implement WARN_ON() using __WARN_FLAGS()
bug: Add report_bug_entry()
bug: Add BUG_FORMAT_ARGS infrastructure
bug: Clean up CONFIG_GENERIC_BUG_RELATIVE_POINTERS
bug: Add BUG_FORMAT infrastructure
x86: Rework __bug_table helpers
bugs/s390: Remove private WARN_ON() implementation
bugs/core: Reorganize fields in the first line of WARNING output, add ->comm[] output
bugs/sh: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/parisc: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Concatenate 'cond_str' with '__FILE__' in __BUG_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Pass in 'cond_str' to __BUG_FLAGS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- x86/alternatives: Drop unnecessary test after call to
alt_replace_call() (Juergen Gross)
- x86/dumpstack: Prevent KASAN false positive warnings in
__show_regs() (Tengda Wu)
* tag 'x86-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Prevent KASAN false positive warnings in __show_regs()
x86/alternative: Drop not needed test after call of alt_replace_call()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 math-emu fix from Ingo Molnar:
"A single fix for an ancient prototype in the math-emu code, by Arnd
Bergmann"
* tag 'x86-build-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/math-emu: Fix div_Xsig() prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
- x86/apic: Fix the frequency in apic=verbose log output (Julian
Stecklina)
- Simplify mp_irqdomain_alloc() slightly (Christophe JAILLET)
* tag 'x86-apic-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix frequency in apic=verbose log output
x86/ioapic: Simplify mp_irqdomain_alloc() slightly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scalability and load-balancing improvements:
- Enable scheduler feature NEXT_BUDDY (Mel Gorman)
- Reimplement NEXT_BUDDY to align with EEVDF goals (Mel Gorman)
- Skip sched_balance_running cmpxchg when balance is not due (Tim
Chen)
- Implement generic code for architecture specific sched domain NUMA
distances (Tim Chen)
- Optimize the NUMA distances of the sched-domains builds of Intel
Granite Rapids (GNR) and Clearwater Forest (CWF) platforms (Tim
Chen)
- Implement proportional newidle balance: a randomized algorithm that
runs newidle balancing proportional to its success rate. (Peter
Zijlstra)
Scheduler infrastructure changes:
- Implement the 'sched_change' scoped_guard() pattern for the entire
scheduler (Peter Zijlstra)
- More broadly utilize the sched_change guard (Peter Zijlstra)
- Add support to pick functions to take runqueue-flags (Joel
Fernandes)
- Provide and use set_need_resched_current() (Peter Zijlstra)
Fair scheduling enhancements:
- Forfeit vruntime on yield (Fernand Sieber)
- Only update stats for allowed CPUs when looking for dst group (Adam
Li)
CPU-core scheduling enhancements:
- Optimize core cookie matching check (Fernand Sieber)
Deadline scheduler fixes:
- Only set free_cpus for online runqueues (Doug Berger)
- Fix dl_server time accounting (Peter Zijlstra)
- Fix dl_server stop condition (Peter Zijlstra)
Proxy scheduling fixes:
- Yield the donor task (Fernand Sieber)
Fixes and cleanups:
- Fix do_set_cpus_allowed() locking (Peter Zijlstra)
- Fix migrate_disable_switch() locking (Peter Zijlstra)
- Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
(Hao Jia)
- Increase sched_tick_remote timeout (Phil Auld)
- sched/deadline: Use cpumask_weight_and() in dl_bw_cpus() (Shrikanth
Hegde)
- sched/deadline: Clean up select_task_rq_dl() (Shrikanth Hegde)"
* tag 'sched-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched: Provide and use set_need_resched_current()
sched/fair: Proportional newidle balance
sched/fair: Small cleanup to update_newidle_cost()
sched/fair: Small cleanup to sched_balance_newidle()
sched/fair: Revert max_newidle_lb_cost bump
sched/fair: Reimplement NEXT_BUDDY to align with EEVDF goals
sched/fair: Enable scheduler feature NEXT_BUDDY
sched: Increase sched_tick_remote timeout
sched/fair: Have SD_SERIALIZE affect newidle balancing
sched/fair: Skip sched_balance_running cmpxchg when balance is not due
sched/deadline: Minor cleanup in select_task_rq_dl()
sched/deadline: Use cpumask_weight_and() in dl_bw_cpus
sched/deadline: Document dl_server
sched/deadline: Fix dl_server stop condition
sched/deadline: Fix dl_server time accounting
sched/core: Remove double update_rq_clock() in __set_cpus_allowed_ptr_locked()
sched/eevdf: Fix min_vruntime vs avg_vruntime
sched/core: Add comment explaining force-idle vruntime snapshots
sched/core: Optimize core cookie matching check
sched/proxy: Yield the donor task
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
|
|
Remove trailing whitespace on empty lines.
No functional changes.
[ bp: Massage commit message. ]
Signed-off-by: Harry Fellowes <harryfellowes1@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20250825192832.6444-3-harryfellowes1@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
standalone cache drivers for v6.19
ccache:
Add a compatible for the pic64gx SoC. No driver change needed, as it
falls back to the PolarFire SoC.
hisi hha/generic cpu cache maintenance:
Add support for a non-architectural mechanism for invalidating memory
regions, needed for some cxl implementations on arm64 (and probably
elsewhere in the future). The HiSilicon Hydra Home Agent is the first
driver to provide this support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'cache-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This code doesn't run. Since 2008:
4f9c11dd49fb ("x86, 64-bit: adjust mapping of physical pagetables to work with Xen")
the kernel has gained more flexible logging and tracing capabilities;
presumably if anyone wanted to take advantage of this log message they would
have got rid of the "if (0)" so they could use these capabilities.
Since they haven't, just delete it.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003-x86-init-cleanup-v1-1-f2b7994c2ad6@google.com
|
|
Linus figured less #ifdef is more better and making x86-32 use
GENERIC_BUG_RELATIVE_POINTERS removes one layer of macro magic from
the bug.h bits.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Encoding a relative NULL pointer doesn't work for KASLR, when the
whole kernel image gets shifted, the __bug_table and the target string
get shifted by the same amount and the relative offset is preserved.
However when the target is an absolute 0 value and the __bug_table
gets moved about, the end result in a pointer equivalent to
kaslr_offset(), not NULL.
Notably, this will generate SHN_UNDEF relocations, and Ard would
really like to not have those at all.
Use the empty string to denote no-string.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
KVM SVM changes for 6.19:
- Fix a few missing "VMCB dirty" bugs.
- Fix the worst of KVM's lack of EFER.LMSLE emulation.
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
- Fix incorrect handling of selective CR0 writes when checking intercepts
during emulation of L2 instructions.
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
VMRUN and #VMEXIT.
- Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
interrupt if the guest patched the underlying code after the VM-Exit, e.g.
when Linux patches code with a temporary INT3.
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
userspace, and extend KVM "support" to all policy bits that don't require
any actual support from KVM.
|
|
KVM VMX changes for 6.19:
- Use the root role from kvm_mmu_page to construct EPTPs instead of the
current vCPU state, partly as worthwhile cleanup, but mostly to pave the
way for tracking per-root TLB flushes so that KVM can elide EPT flushes on
pCPU migration if KVM has flushed the root at least once.
- Add a few missing nested consistency checks.
- Rip out support for doing "early" consistency checks via hardware as the
functionality hasn't been used in years and is no longer useful in general,
and replace it with an off-by-default module param to detected missed
consistency checks (i.e. WARN if hardware finds a check that KVM does not).
- Fix a currently-benign bug where KVM would drop the guest's SPEC_CTRL[63:32]
on VM-Enter.
- Misc cleanups.
|
|
KVM TDX changes for 6.19:
- Overhaul the TDX code to address systemic races where KVM (acting on behalf
of userspace) could inadvertantly trigger lock contention in the TDX-Module,
which KVM was either working around in weird, ugly ways, or was simply
oblivious to (as proven by Yan tripping several KVM_BUG_ON()s with clever
selftests).
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a vCPU if
creating said vCPU failed partway through.
- Fix a few sparse warnings (bad annotation, 0 != NULL).
- Use struct_size() to simplify copying capabilities to userspace.
|
|
KVM x86 MMU changes for 6.19:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO SPTE
caching is disabled, as there can't be any relevant SPTEs to zap.
- Relocate a misplace export.
|
|
KVM x86 misc changes for 6.19:
- Fix an async #PF bug where KVM would clear the completion queue when the
guest transitioned in and out of paging mode, e.g. when handling an SMI and
then returning to paged mode via RSM.
- Fix a bug where TDX would effectively corrupt user-return MSR values if the
TDX Module rejects VP.ENTER and thus doesn't clobber host MSRs as expected.
- Leave the user-return notifier used to restore MSRs registered when
disabling virtualization, and instead pin kvm.ko. Restoring host MSRs via
IPI callback is either pointless (clean reboot) or dangerous (forced reboot)
since KVM has no idea what code it's interrupting.
- Use the checked version of {get,put}_user(), as Linus wants to kill them
off, and they're measurably faster on modern CPUs due to the unchecked
versions containing an LFENCE.
- Fix a long-lurking bug where KVM's lack of catch-up logic for periodic APIC
timers can result in a hard lockup in the host.
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NPT corrections.
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the latter
behind CONFIG_CPU_MITIGATIONS.
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fastpath as
the only reason they were handled in the faspath was to paper of a bug in
the core #MC code that has long since been fixed.
- Add emulator support for AVX MOV instructions to play nice with emulated
devices whose PCI BARs guest drivers like to access with large multi-byte
instructions.
|
|
(Ab)use the static_call infrastructure to convert all:
call __WARN_trap
instances into the desired:
ud1 (%edx), %rdi
eliminating the CALL/RET, but more importantly, fixing the
fact that all WARNs will have:
RIP: 0010:__WARN_trap+0
Basically, by making it a static_call trampoline call, objtool will
collect the callsites, and then the inline rewrite will hit the
special case and replace the code with the magic instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115758.456717741@infradead.org
|
|
Implement WARN_ONCE like WARN using BUGFLAG_ONCE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115758.339309119@infradead.org
|
|
The basic idea is to have __WARN_printf() be a vararg function such
that the compiler can do the optimal calling convention for us. This
function body will be a #UD and then set up a va_list in the exception
from pt_regs.
But because the trap will be in a called function, the bug_entry must
be passed in. Have that be the first argument, with the format tucked
away inside the bug_entry.
The comments should clarify the real fun details.
The big downside is that all WARNs will now show:
RIP: 0010:__WARN_trap:+0
One possible solution is to simply discard the top frame when
unwinding. A follow up patch takes care of this slightly differently
by abusing the x86 static_call implementation.
This changes (with the next patches):
WARN_ONCE(preempt_count() != 2*PREEMPT_DISABLE_OFFSET,
"corrupted preempt_count: %s/%d/0x%x\n",
from:
cmpl $2, %ecx #, _7
jne .L1472
...
.L1472:
cmpb $0, __already_done.11(%rip)
je .L1513
...
.L1513
movb $1, __already_done.11(%rip)
movl 1424(%r14), %edx # _15->pid, _15->pid
leaq 1912(%r14), %rsi #, _17
movq $.LC43, %rdi #,
call __warn_printk #
ud2
.pushsection __bug_table,"aw"
2:
.long 1b - . # bug_entry::bug_addr
.long .LC1 - . # bug_entry::file
.word 5093 # bug_entry::line
.word 2313 # bug_entry::flags
.org 2b + 12
.popsection
.pushsection .discard.annotate_insn,"M", @progbits, 8
.long 1b - .
.long 8 # ANNOTYPE_REACHABLE
.popsection
into:
cmpl $2, %ecx #, _7
jne .L1442 #,
...
.L1442:
lea (2f)(%rip), %rdi
1:
.pushsection __bug_table,"aw"
2:
.long 1b - . # bug_entry::bug_addr
.long .LC43 - . # bug_entry::format
.long .LC1 - . # bug_entry::file
.word 5093 # bug_entry::line
.word 2323 # bug_entry::flags
.org 2b + 16
.popsection
movl 1424(%r14), %edx # _19->pid, _19->pid
leaq 1912(%r14), %rsi #, _13
ud1 (%edx), %rdi
Notably, by pushing everything into the exception handler it can take
care of the ONCE thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115758.213813530@infradead.org
|
|
Since we have an explicit format string, use it for the condition string
instead of frobbing it in the file string.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115758.097401406@infradead.org
|
|
Opt-in to BUG_FORMAT for x86_64, adjust the BUGTABLE helper and for
now, just store NULL pointers.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.980264454@infradead.org
|
|
In the origin logic, the bpf_arch_text_poke() assume that the old and new
instructions have the same opcode. However, they can have different opcode
if we want to replace a "call" insn with a "jmp" insn.
Therefore, add the new function parameter "old_t" along with the "new_t",
which are used to indicate the old and new poke type. Meanwhile, adjust
the implement of bpf_arch_text_poke() for all the archs.
"BPF_MOD_NOP" is added to make the code more readable. In
bpf_arch_text_poke(), we still check if the new and old address is NULL to
determine if nop insn should be used, which I think is more safe.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the origin call case, if BPF_TRAMP_F_SKIP_FRAME is not set, it means
that the trampoline is not called, but "jmp".
Introduce the function bpf_trampoline_use_jmp() to check if the trampoline
is in "jmp" mode.
Do some adjustment on the "jmp" mode for the x86_64. The main adjustment
that we make is for the stack parameter passing case, as the stack
alignment logic changes in the "jmp" mode without the "rip". What's more,
the location of the parameters on the stack also changes.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some places calculate the origin_call by checking if
BPF_TRAMP_F_SKIP_FRAME is set. However, it should use
BPF_TRAMP_F_ORIG_STACK for this propose. Just fix them.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20251118123639.688444-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement the DYNAMIC_FTRACE_WITH_JMP for x86_64. In ftrace_call_replace,
we will use JMP32_INSN_OPCODE instead of CALL_INSN_OPCODE if the address
should use "jmp".
Meanwhile, adjust the direct call in the ftrace_regs_caller. The RSB is
balanced in the "jmp" mode. Take the function "foo" for example:
original_caller:
call foo -> foo:
call fentry -> fentry:
[do ftrace callbacks ]
move tramp_addr to stack
RET -> tramp_addr
tramp_addr:
[..]
call foo_body -> foo_body:
[..]
RET -> back to tramp_addr
[..]
RET -> back to original_caller
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20251118123639.688444-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
