| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
queue_limits_commit_update() expects q->limits_lock to be held by
the caller (via queue_limits_start_update()).
The API pattern is:
lim = queue_limits_start_update(q); /* acquires lock */
/* modify lim */
queue_limits_commit_update(q, &lim); /* releases lock */
OR
queue_limits_commit_update_frozen(q, &lim);
lim = queue_limits_start_update(q); /* acquires lock */
queue_limits_commit_update(q, &lim); /* releases lock */
Add lockdep_assert_held() to report incorrect API usage.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current block layer automatic integrity protection allocates the
actual integrity buffer, which has three problems:
- because it happens at the bottom of the I/O stack and doesn't use a
mempool it can deadlock under load
- because the data size in a bio is almost unbounded when using lage
folios it can relatively easily exceed the maximum kmalloc size
- even when it does not exceed the maximum kmalloc size, it could
exceed the maximum segment size of the device
Fix this by limiting the I/O size so that we can allocate at least a
2MiB integrity buffer, i.e. 128MiB for 8 byte PI and 512 byte integrity
intervals, and create a mempool as a last resort for this maximum size,
mirroring the scheme used for bvecs. As a nice upside none of this
can fail now, so we remove the error handling and open code the
trivial addition of the bip vec.
The new allocation helpers sit outside of bio-integrity-auto.c because
I plan to reuse them for file system based PI in the near future.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer PI generation / verification code expects the bio_vecs
to have at least LBA size (or more correctly integrity internal)
granularity. With the direct I/O alignment relaxation in 2022, user
space can now feed bios with less alignment than that, leading to
scribbling outside the PI buffers. Apparently this wasn't noticed so far
because none of the tests generate such buffers, but since 851c4c96db00
("xfs: implement XFS_IOC_DIOINFO in terms of vfs_getattr"), xfstests
generic/013 by default generates such I/O now that the relaxed alignment
is advertised by the XFS_IOC_DIOINFO ioctl.
Fix this by increasing the required alignment when using PI, although
handling arbitrary alignment in the long run would be even nicer.
Fixes: bf8d08532bc1 ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8ec ("block: relax direct io memory alignment")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Despite its name, the block layer is fine with segments smaller that the
"min_segment_size" limit. The value is an optimization limit indicating
the largest segment that can be used without considering boundary
limits. Smaller segments can take a fast path, so give it a name that
reflects that: max_fast_segment_size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_validate_atomic_write_limits() ensures that any boundary fits into
and is aligned to any chunk size.
However, it should also be possible to fit the chunk size into any
boundary. That check is already made in
blk_stack_atomic_writes_boundary_head().
Relax the check in blk_validate_atomic_write_limits() by reusing (and
renaming) blk_stack_atomic_writes_boundary_head().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Atomic writes support may not always be possible when stacking devices
which support atomic writes. Such as case is a different atomic write
boundary between stacked devices (which is not supported).
In the case that atomic writes cannot supported, the top device queue HW
limits are set to 0.
However, in blk_stack_atomic_writes_limits(), we detect that we are
stacking the first bottom device by checking the top device
atomic_write_hw_max value == 0. This get confused with the case of atomic
writes not supported, above.
Make the distinction between stacking the first bottom device and no
atomics supported by initializing stacked device atomic_write_hw_max =
UINT_MAX and checking that for stacking the first bottom device.
Fixes: d7f36dc446e8 ("block: Support atomic writes limits for stacked devices")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In commit 63d092d1c1b1 ("block: use chunk_sectors when evaluating stacked
atomic write limits"), it was missed to use a chunk sectors limit check
in blk_stack_atomic_writes_boundary_head(), so update that function to
do the proper check.
Fixes: 63d092d1c1b1 ("block: use chunk_sectors when evaluating stacked atomic write limits")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.
Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing. Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.
No effect on runtime.
Link: https://lore.kernel.org/all/x3wogjf6vgpkisdhg3abzrx7v7zktmdnfmqeih5kosszmagqfs@oh3qxrgzkikf/ #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Fixes: fe0b393f2c0a ("block: Correct handling of bottom device misaligment")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250902130930.68317-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Otherwise they are very hard to read in the kernel log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_stack_integrity needs to handle the new pi_tuple_size field,
otherwise stacking PI-capable devices will always fail.
Fixes: 76e45252a4ce ("block: introduce pi_tuple_size field in blk_integrity")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Documentation/ABI/stable/sysfs-block states:
What: /sys/block/<disk>/queue/discard_granularity
[...]
A discard_granularity of 0 means that the device does not support
discard functionality.
but this got broken when sorting out the block limits updates. Fix this
by setting the discard_granularity limit to zero when the combined
max_discard_sectors is zero.
Fixes: 3c407dc723bb ("block: default the discard granularity to sector size")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250731152228.873923-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The merging/splitting code and other queue limits checking depends on the
physical block size being a power-of-2, so enforce it.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250729091448.1691334-3-john.g.garry@oracle.com
[axboe: add missing braces]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In blk_stack_limits(), we check that the t->chunk_sectors value is a
multiple of the t->physical_block_size value.
However, by finding the chunk_sectors value in bytes, we may overflow
the unsigned int which holds chunk_sectors, so change the check to be
based on sectors.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250729091448.1691334-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For a device that does not advertize an optimal I/O size, the function
blk_apply_bdi_limits() defaults to an initial setting of the ra_pages
field of struct backing_dev_info to VM_READAHEAD_PAGES, that is, 128 KB.
This low I/O size value is far from being optimal for hard-disk devices:
when reading files from multiple contexts using buffered I/Os, the seek
overhead between the small read commands generated to read-ahead
multiple files will significantly limit the performance that can be
achieved.
This fact applies to all ATA devices as ATA does not define an optimal
I/O size and the SCSI SAT specification does not define a default value
to expose to the host.
Modify blk_apply_bdi_limits() to use a device max_sectors limit to
calculate the ra_pages field of struct backing_dev_info, when the device
is a rotational one (BLK_FEAT_ROTATIONAL feature is set). For a SCSI
disk, this defaults to 2560 KB, which significantly improve performance
for buffered reads. Using XFS and sequentially reading randomly selected
(large) files stored on a SATA HDD, the maximum throughput achieved with
8 readers reading files with 1MB buffered I/Os increases from 122 MB/s
to 167 MB/s (+36%). The improvement is even larger when reading files
using 128 KB buffered I/Os, with a throughput increasing from 57 MB/s to
165 MB/s (+189%).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250616062856.1629897-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs 'protection info' updates from Christian Brauner:
"This adds the new FS_IOC_GETLBMD_CAP ioctl() to query metadata and
protection info (PI) capabilities. This ioctl returns information
about the files integrity profile. This is useful for userspace
applications to understand a files end-to-end data protection support
and configure the I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
- lbmd_flags:
bitmask of logical block metadata capability flags
- lbmd_interval:
the amount of data described by each unit of logical block metadata
- lbmd_size:
size in bytes of the logical block metadata associated with each
interval
- lbmd_opaque_size:
size in bytes of the opaque block tag associated with each interval
- lbmd_opaque_offset:
offset in bytes of the opaque block tag within the logical block
metadata
- lbmd_pi_size:
size in bytes of the T10 PI tuple associated with each interval
- lbmd_pi_offset:
offset in bytes of T10 PI tuple within the logical block metadata
- lbmd_pi_guard_tag_type:
T10 PI guard tag type
- lbmd_pi_app_tag_size:
size in bytes of the T10 PI application tag
- lbmd_pi_ref_tag_size:
size in bytes of the T10 PI reference tag
- lbmd_pi_storage_tag_size:
size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled"
* tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP
block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()
fs: add ioctl to query metadata and protection info capabilities
nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE
block: introduce pi_tuple_size field in blk_integrity
block: rename tuple_size field in blk_integrity to metadata_size
|
|
The atomic write unit max value is limited by any stacked device stripe
size.
It is required that the atomic write unit is a power-of-2 factor of the
stripe size.
Currently we use io_min limit to hold the stripe size, and check for a
io_min <= SECTOR_SIZE when deciding if we have a striped stacked device.
Nilay reports that this causes a problem when the physical block size is
greater than SECTOR_SIZE [0].
Furthermore, io_min may be mutated when stacking devices, and this makes
it a poor candidate to hold the stripe size. Such an example (of when
io_min may change) would be when the io_min is less than the physical
block size.
Use chunk_sectors to hold the stripe size, which is more appropriate.
[0] https://lore.kernel.org/linux-block/888f3b1d-7817-4007-b3b3-1a2ea04df771@linux.ibm.com/T/#mecca17129f72811137d3c2f1e477634e77f06781
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we just ensure that a non-zero value in chunk_sectors aligns
with any atomic write boundary, as the blk boundary functionality uses
both these values.
However it is also improper to have atomic write unit max > chunk_sectors
(for non-zero chunk_sectors), as this would lead to splitting of atomic
write bios (which is disallowed).
Sanitize atomic write unit max against chunk_sectors to avoid any
potential problems.
Fixes: d00eea91deaf3 ("block: Add extra checks in blk_validate_atomic_write_limits()")
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce a new pi_tuple_size field in struct blk_integrity to
explicitly represent the size (in bytes) of the protection information
(PI) tuple. This is a prep patch.
Add validation in blk_validate_integrity_limits() to ensure that
pi size matches the expected size for known checksum types and never
exceeds the pi_tuple_size.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-3-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The tuple_size field in blk_integrity currently represents the total
size of metadata associated with each data interval. To make the meaning
more explicit, rename tuple_size to metadata_size. This is a purely
mechanical rename with no functional changes.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently, disks primarily implement the write zeroes command (aka
REQ_OP_WRITE_ZEROES) through two mechanisms: the first involves
physically writing zeros to the disk media (e.g., HDDs), while the
second performs an unmap operation on the logical blocks, effectively
putting them into a deallocated state (e.g., SSDs). The first method is
generally slow, while the second method is typically very fast.
For example, on certain NVMe SSDs that support NVME_NS_DEAC, submitting
REQ_OP_WRITE_ZEROES requests with the NVME_WZ_DEAC bit can accelerate
the write zeros operation by placing disk blocks into a deallocated
state, which opportunistically avoids writing zeroes to media while
still guaranteeing that subsequent reads from the specified block range
will return zeroed data. This is a best-effort optimization, not a
mandatory requirement, some devices may partially fall back to writing
physical zeroes due to factors such as misalignment or being asked to
clear a block range smaller than the device's internal allocation unit.
Therefore, the speed of this operation is not guaranteed.
It is difficult to determine whether the storage device supports unmap
write zeroes operation. We cannot determine this by only querying
bdev_limits(bdev)->max_write_zeroes_sectors. Therefore, first, add a new
hardware queue limit parameters, max_hw_wzeroes_unmap_sectors, to
indicate whether a device supports this unmap write zeroes operation.
Then, add two new counterpart software queue limits,
max_wzeroes_unmap_sectors and max_user_wzeroes_unmap_sectors, which
allow users to disable this operation if the speed is very slow on some
sepcial devices.
Finally, for the stacked devices cases, initialize these two parameters
to UINT_MAX. This operation should be enabled by both the stacking
driver and all underlying devices.
Thanks to Martin K. Petersen for optimizing the documentation of the
write_zeroes_unmap sysfs interface.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-2-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the user increased the read-ahead size through sysfs this value
currently get lost if the device is reprobe, including on a resume
from suspend.
As there is no hardware limitation for the read-ahead size there is
no real need to reset it or track a separate hardware limitation
like for max_sectors.
This restores the pre-atomic queue limit behavior in the sd driver as
sd did not use blk_queue_io_opt and thus never updated the read ahead
size to the value based of the optimal I/O, but changes behavior for
all other drivers. As the new behavior seems useful and sd is the
driver for which the readahead size tweaks are most useful that seems
like a worthwhile trade off.
Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250424082521.1967286-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
There're few sysfs attributes in block layer which don't really need
acquiring q->sysfs_lock while accessing it. The reason being, reading/
writing a value from/to such attributes are either atomic or could be
easily protected using READ_ONCE()/WRITE_ONCE(). Moreover, sysfs
attributes are inherently protected with sysfs/kernfs internal locking.
So this change help segregate all existing sysfs attributes for which
we could avoid acquiring q->sysfs_lock. For all read-only attributes
we removed the q->sysfs_lock from show method of such attributes. In
case attribute is read/write then we removed the q->sysfs_lock from
both show and store methods of these attributes.
We audited all block sysfs attributes and found following list of
attributes which shouldn't require q->sysfs_lock protection:
1. io_poll:
Write to this attribute is ignored. So, we don't need q->sysfs_lock.
2. io_poll_delay:
Write to this attribute is NOP, so we don't need q->sysfs_lock.
3. io_timeout:
Write to this attribute updates q->rq_timeout and read of this
attribute returns the value stored in q->rq_timeout Moreover, the
q->rq_timeout is set only once when we init the queue (under blk_mq_
init_allocated_queue()) even before disk is added. So that means
that we don't need to protect it with q->sysfs_lock. As this
attribute is not directly correlated with anything else simply using
READ_ONCE/WRITE_ONCE should be enough.
4. nomerges:
Write to this attribute file updates two q->flags : QUEUE_FLAG_
NOMERGES and QUEUE_FLAG_NOXMERGES. These flags are accessed during
bio-merge which anyways doesn't run with q->sysfs_lock held.
Moreover, the q->flags are updated/accessed with bitops which are
atomic. So, protecting it with q->sysfs_lock is not necessary.
5. rq_affinity:
Write to this attribute file makes atomic updates to q->flags:
QUEUE_FLAG_SAME_COMP and QUEUE_FLAG_SAME_FORCE. These flags are
also accessed from blk_mq_complete_need_ipi() using test_bit macro.
As read/write to q->flags uses bitops which are atomic, protecting
it with q->stsys_lock is not necessary.
6. nr_zones:
Write to this attribute happens in the driver probe method (except
nvme) before disk is added and outside of q->sysfs_lock or any other
lock. Moreover nr_zones is defined as "unsigned int" and so reading
this attribute, even when it's simultaneously being updated on other
cpu, should not return torn value on any architecture supported by
linux. So we can avoid using q->sysfs_lock or any other lock/
protection while reading this attribute.
7. discard_zeroes_data:
Reading of this attribute always returns 0, so we don't require
holding q->sysfs_lock.
8. write_same_max_bytes
Reading of this attribute always returns 0, so we don't require
holding q->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304102551.2533767-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, BLK_INTEGRITY_NOGENERATE and BLK_INTEGRITY_NOVERIFY are not
explicitly set during integrity initialization. This can lead to
incorrect reporting of read_verify and write_generate sysfs values,
particularly when a device does not support integrity. Ensure that these
flags are correctly initialized by default.
Reported-by: M Nikhil <nikh1092@linux.ibm.com>
Link: https://lore.kernel.org/linux-block/f6130475-3ccd-45d2-abde-3ccceada0f0a@linux.ibm.com/
Fixes: 9f4aa46f2a74 ("block: invert the BLK_INTEGRITY_{GENERATE,VERIFY} flags")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250305063033.1813-3-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_stack_integrity() incorrectly sets
BLK_INTEGRITY_DEVICE_CAPABLE for a DM device even when none of its
underlying devices support integrity. This happens because the flag is
inherited unconditionally. Ensure that integrity capabilities are
correctly propagated only when the underlying devices actually support
integrity.
Reported-by: M Nikhil <nikh1092@linux.ibm.com>
Link: https://lore.kernel.org/linux-block/f6130475-3ccd-45d2-abde-3ccceada0f0a@linux.ibm.com/
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250305063033.1813-2-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
None of the few drivers still using the legacy block layer bounce
buffering support integrity metadata. Explicitly mark the features as
incompatible and stop creating the slab and mempool for integrity
buffers for the bounce bio_set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250225154449.422989-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using PAGE_SIZE as a minimum expected DMA segment size in consideration
of devices which have a max DMA segment size of < 64k when used on 64k
PAGE_SIZE systems leads to devices not being able to probe such as
eMMC and Exynos UFS controller [0] [1] you can end up with a probe failure
as follows:
WARNING: CPU: 2 PID: 397 at block/blk-settings.c:339 blk_validate_limits+0x364/0x3c0
Ensure we use min(max_seg_size, seg_boundary_mask + 1) as the new min segment
size when max segment size is < PAGE_SIZE for 16k and 64k base page size systems.
If anyone need to backport this patch, the following commits are depended:
commit 6aeb4f836480 ("block: remove bio_add_pc_page")
commit 02ee5d69e3ba ("block: remove blk_rq_bio_prep")
commit b7175e24d6ac ("block: add a dma mapping iterator")
Link: https://lore.kernel.org/linux-block/20230612203314.17820-1-bvanassche@acm.org/ # [0]
Link: https://lore.kernel.org/linux-block/1d55e942-5150-de4c-3a02-c3d066f87028@acm.org/ # [1]
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Tested-by: Paul Bunyan <pbunyan@redhat.com>
Reviewed-by: Daniel Gomez <da.gomez@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250225022141.2154581-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.
This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.
Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current check in blk_stack_atomic_writes_limits() for a bottom device
supporting atomic writes is to verify that limit atomic_write_unit_min is
non-zero.
This would cause a problem for device mapper queue limits calculation. This
is because it uses a temporary queue_limits structure to stack the limits,
before finally commiting the limits update.
The value of atomic_write_unit_min for the temporary queue_limits
structure is never evaluated and so cannot be used, so use limit
atomic_write_hw_unit_min.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250109114000.2299896-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For stacking atomic writes, ensure that the start sector is aligned with
the device atomic write unit min and any boundary. Otherwise, we may
permit misaligned atomic writes.
Rework bdev_can_atomic_write() into a common helper to resuse the
alignment check. There also use atomic_write_hw_unit_min, which is more
proper (than atomic_write_unit_min).
Fixes: d7f36dc446e89 ("block: Support atomic writes limits for stacked devices")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250109114000.2299896-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update is the function that needs to operate on a
frozen queue, not queue_limits_start_update. Update the kerneldoc
comments to reflect that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow stacked devices to support atomic writes by aggregating the minimum
capability of all bottom devices.
Flag BLK_FEAT_ATOMIC_WRITES_STACKED is set for stacked devices which
have been enabled to support atomic writes.
Some things to note on the implementation:
- For simplicity, all bottom devices must have same atomic write boundary
value (if any)
- The atomic write boundary must be a power-of-2 already, but this
restriction could be relaxed. Furthermore, it is now required that the
chunk sectors for a top device must be aligned with this boundary.
- If a bottom device atomic write unit min/max are not aligned with the
top device chunk sectors, the top device atomic write unit min/max are
reduced to a value which works for the chunk sectors.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241118105018.1870052-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is so far expected that the limits passed are valid.
In future atomic writes will be supported for stacked block devices, and
calculating the limits there will be complicated, so add extra sanity
checks to ensure that the values are always valid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241118105018.1870052-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lim->discard_granularity is always at least SECTOR_SIZE, so drop the
pointless check for granularity less than SECTOR_SIZE.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112092144.4059847-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There was a bug report [1] where the user got a warning alignment
inconsistency. The user has optimal I/O 16776704 (0xFFFE00) and physical
block size 4096. Note that the optimal I/O size may be set by the DMA
engines or SCSI controllers and they have no knowledge about the disks
attached to them, so the situation with optimal I/O not aligned to
physical block size may happen.
This commit makes blk_validate_limits round down optimal I/O size to the
physical block size of the block device.
Closes: https://lore.kernel.org/dm-devel/1426ad71-79b4-4062-b2bf-84278be66a5d@redhat.com/T/ [1]
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: a23634644afc ("block: take io_opt and io_min into account for max_sectors")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/3dc0014b-9690-dc38-81c9-4a316a2d4fb2@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While block drivers do the validation as part of committing them to the
queue, users that use the limit outside of a block device context have
to validate the limits and fill in the calculated values as well.
So far btrfs is the only user of queue limits without a block device,
and it has gotten away with that more or less by accident. But with
commit 559218d43ec9 ("block: pre-calculate max_zone_append_sectors")
this became fatal for setups that have small max zone append size,
as it won't be limited now.
Export blk_validate_limits so that it can be called directly from btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This causes issue on, at least, nvme-mpath where my boot fails with:
WARNING: CPU: 354 PID: 2729 at block/blk-settings.c:75 blk_validate_limits+0x356/0x380
Modules linked in: tg3(+) nvme usbcore scsi_mod ptp i2c_piix4 libphy nvme_core crc32c_intel scsi_common usb_common pps_core i2c_smbus
CPU: 354 UID: 0 PID: 2729 Comm: kworker/u2061:1 Not tainted 6.12.0-rc6+ #181
Hardware name: Dell Inc. PowerEdge R7625/06444F, BIOS 1.8.3 04/02/2024
Workqueue: async async_run_entry_fn
RIP: 0010:blk_validate_limits+0x356/0x380
Code: f6 47 01 04 75 28 83 bf 94 00 00 00 00 75 39 83 bf 98 00 00 00 00 75 34 83 7f 68 00 75 32 31 c0 83 7f 5c 00 0f 84 9b fd ff ff <0f> 0b eb 13 0f 0b eb 0f 48 c7 c0 74 12 58 92 48 89 c7 e8 13 76 46
RSP: 0018:ffffa8a1dfb93b30 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9232829c8388 RCX: 0000000000000088
RDX: 0000000000000080 RSI: 0000000000000200 RDI: ffffa8a1dfb93c38
RBP: 000000000000000c R08: 00000000ffffffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9232829b9000
R13: ffff9232829b9010 R14: ffffa8a1dfb93c38 R15: ffffa8a1dfb93c38
FS: 0000000000000000(0000) GS:ffff923867c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c1b92480a8 CR3: 0000002484ff0002 CR4: 0000000000370ef0
Call Trace:
<TASK>
? __warn+0xca/0x1a0
? blk_validate_limits+0x356/0x380
? report_bug+0x11a/0x1a0
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? blk_validate_limits+0x356/0x380
blk_alloc_queue+0x7a/0x250
__blk_alloc_disk+0x39/0x80
nvme_mpath_alloc_disk+0x13d/0x1b0 [nvme_core]
nvme_scan_ns+0xcc7/0x1010 [nvme_core]
async_run_entry_fn+0x27/0x120
process_scheduled_works+0x1a0/0x360
worker_thread+0x2bc/0x350
? pr_cont_work+0x1b0/0x1b0
kthread+0x111/0x120
? kthread_unuse_mm+0x90/0x90
ret_from_fork+0x30/0x40
? kthread_unuse_mm+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
presumably due to max_zone_append_sectors not being cleared to zero,
resulting in blk_validate_zoned_limits() complaining and failing.
This reverts commit 2a8f6153e1c2db06a537a5c9d61102eb591776f1.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Listing every single features that needs to be pre-set by stacking
drivers does not scale.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104054218.45596-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to get the queue_limits from the bdev without having to
poke into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241029141937.249920-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_limits_io_min and blk_limits_io_opt are unused since the
recent commit
0a94a469a4f0 ("dm: stop using blk_limits_io_{min,opt}")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920004817.676216-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't reduce the max_sectors value below the normal cap when the driver
advertsizes a very low io_opt. This restores the behavior we had before
the recent changes to the max_sectors calculation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If io_min is larger than the cap, it must by definition be non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
