summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
7 daysMerge tag 'amd-drm-next-6.19-2025-12-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.19-2025-12-02: amdgpu: - Unified MES fix - SMU 11 unbalanced irq fix - Fix for driver reloading on APUs - pp_table sysfs fix - Fix memory leak in fence handling - HDMI fix - DC cursor fixes - eDP panel parsing fix - Brightness fix - DC analog fixes - EDID retry fixes - UserQ fixes - RAS fixes - IP discovery fix - Add missing locking in amdgpu_ttm_access_memory_sdma() - Smart Power OLED fix - PRT and page fault fixes for GC 6-8 - VMID reservation fix - ACP platform device fix - Add missing vm fault handling for GC 11-12 - VPE fix amdkfd: - Partitioning fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20251202220101.2039347-1-alexander.deucher@amd.com
7 daysdrm/amd/display: fix typo in display_mode_core_structs.hAditya Gollamudi
Fix a typo in a comment, change "enviroment" to "environment" in drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h Fixes: e6a8a000cfe6 ("drm/amd/display: Rename dml2 to dml2_0 folder") Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
7 daysdrm/amd/display: fix Smart Power OLED not working after S4Ian Chen
[HOW] Before enable smart power OLED, we need to call set pipe to let DMUB get correct ABM config. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
7 daysdrm/amd/display: Move RGB-type check for audio sync to DCE HW sequenceIvan Lipski
[Why&How] DVI-A & VGA connectors are applicable to DCE ASICs, so move them to dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs. Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
7 daysMerge tag 'drm-misc-next-2025-12-01-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Extra drm-misc-next for v6.19-rc1: UAPI Changes: - Add support for drm colorop pipeline. - Add COLOR PIPELINE plane property. - Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE. Cross-subsystem Changes: - Attempt to use higher order mappings in system heap allocator. - Always taint kernel with sw-sync. Core Changes: - Small fixes to drm/gem. - Support emergency restore to drm-client. - Allocate and release fb_info in single place. - Rework ttm pipelined eviction fence handling. Driver Changes: - Support the drm color pipeline in vkms, amdgfx. - Add NVJPG driver for tegra. - Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp, panthor. - Add ASL CS5263 DP-to-HDMI simple bridge. - Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0, Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA, Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel. - Add support for it66122 to it66121. - Support mali-G1 gpu in panthor. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
13 daysdrm/amd/display: Enable support for Gamma 2.2Alex Hung
This patchset enables support for the Gamma 2.2. With this patch the following IGT subtests pass: kms_colorop --run plane-XR30-XR30-gamma_2_2 kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2 kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2-gamma_2_2_inv Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-52-alex.hung@amd.com
13 daysdrm/amd/display: Disable CRTC degamma when color pipeline is enabledAlex Hung
The degamma is to be handled by Color pipeline API. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-50-alex.hung@amd.com
13 daysdrm/amd/display: Ensure 3D LUT for color pipelineAlex Hung
Check dpp.hw_3d_lut before creating shaper tf/lut and 3dlut colorops in colorpipeline and handling these colorops. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-49-alex.hung@amd.com
13 daysdrm/amd/display: Add AMD color pipeline docHarry Wentland
Add kernel doc for AMD color pipeline. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-48-alex.hung@amd.com
13 daysdrm/amd/display: add 3D LUT coloropAlex Hung
This adds support for a 3D LUT. The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. Multiplier 3. 3x4 CTM 4. 1D curve colorop 5. 1D LUT 6. 3D LUT 7. 1D curve colorop 8. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-47-alex.hung@amd.com
13 daysdrm/colorop: allow non-bypass coloropsHarry Wentland
Not all HW will be able to do bypass on all color operations. Introduce an 32 bits 'flags' for all colorop init functions and DRM_COLOROP_FLAG_ALLOW_BYPASS for creating the BYPASS property when it's true. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-45-alex.hung@amd.com
13 daysdrm/colorop: Define LUT_1D interpolationHarry Wentland
We want to make sure userspace is aware of the 1D LUT interpolation. While linear interpolation is common it might not be supported on all HW. Give driver implementers a way to specify their interpolation. Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
13 daysdrm/amd/display: Swap matrix and multiplierAlex Hung
Swap the order of matrix and multiplier as designed in hardware. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-43-alex.hung@amd.com
13 daysdrm/amd/display: add multiplier coloropAlex Hung
This adds support for a multiplier. This multiplier is programmed via the HDR Multiplier in DCN. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-multiply_125 kms_colorop --run plane-XR30-XR30-multiply_inv_125 The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 3x4 CTM 3. Multiplier 4. 1D curve colorop 5. 1D LUT 6. 1D curve colorop 7. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-42-alex.hung@amd.com
13 daysdrm/amd/display: add 3x4 matrix coloropAlex Hung
This adds support for a 3x4 color transformation matrix. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-ctm_3x4_50_desat kms_colorop --run plane-XR30-XR30-ctm_3x4_overdrive kms_colorop --run plane-XR30-XR30-ctm_3x4_oversaturate kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_enc kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_dec The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 3x4 CTM 3. 1D curve colorop 4. 1D LUT 5. 1D curve colorop 6. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-40-alex.hung@amd.com
13 daysdrm/amd/display: add shaper and blend colorops for 1D Curve Custom LUTAlex Hung
This patch adds colorops for custom 1D LUTs in the SHAPER and BLND HW blocks. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 1D curve colorop 3. 1D LUT 4. 1D curve colorop 5. 1D LUT The 1D curve colorops support sRGB, BT2020, and PQ scaled to 125.0. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-39-alex.hung@amd.com
13 daysdrm/amd/display: Add support for BT.709 and BT.2020 TFsHarry Wentland
This adds support for the BT.709/BT.2020 transfer functions on all current 1D curve plane colorops, i.e., on DEGAM, SHAPER, and BLND blocks. With this change the following IGT subtests pass: kms_colorop --run plane-XR30-XR30-bt2020_inv_oetf kms_colorop --run plane-XR30-XR30-bt2020_oetf Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-35-alex.hung@amd.com
13 daysdrm/amd/display: Enable support for PQ 125 EOTF and InverseHarry Wentland
This patchset enables support for the PQ_125 EOTF and its inverse on all existing plane 1D curve colorops, i.e., on DEGAM, SHAPER, and BLND blocks. With this patchset the following IGT subtests are passing: kms_colorop --run plane-XR30-XR30-pq_125_eotf kms_colorop --run plane-XR30-XR30-pq_125_inv_eotf kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf-pq_125_eotf Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-33-alex.hung@amd.com
13 daysdrm/amd/display: Add support for sRGB EOTF in BLND blockAlex Hung
Expose a 3rd 1D curve colorop, with support for DRM_COLOROP_1D_CURVE_SRGB_EOTF and program the BLND block to perform the sRGB transform when the colorop is not in bypass With this change the following IGT test passes: kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf-srgb_eotf The color pipeline now consists of the following colorops: 1. 1D curve colorop w/ sRGB EOTF support 2. 1D curve colorop w/ sRGB Inverse EOTF support 3. 1D curve colorop w/ sRGB EOTF support Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-31-alex.hung@amd.com
13 daysdrm/amd/display: Add support for sRGB Inverse EOTF in SHAPER blockAlex Hung
Expose a 2nd curve colorop with support for DRM_COLOROP_1D_CURVE_SRGB_INV_EOTF and program HW to perform the sRGB Inverse EOTF on the shaper block when the colorop is not in bypass. With this change the follow IGT tests pass: kms_colorop --run plane-XR30-XR30-srgb_inv_eotf kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf The color pipeline now consists of the following colorops: 1. 1D curve colorop w/ sRGB EOTF support 2. 1D curve colorop w/ sRGB Inverse EOTF support Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-30-alex.hung@amd.com
13 daysdrm/amd/display: Add support for sRGB EOTF in DEGAM blockAlex Hung
Expose one 1D curve colorop with support for DRM_COLOROP_1D_CURVE_SRGB_EOTF and program HW to perform the sRGB transform when the colorop is not in bypass. With this change the following IGT test passes: kms_colorop --run plane-XR30-XR30-srgb_eotf The color pipeline now consists of a single colorop: 1. 1D curve colorop w/ sRGB EOTF Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-29-alex.hung@amd.com
13 daysdrm/amd/display: Skip color pipeline initialization for cursor planeAlex Hung
cursor plane does not need to have color pipeline. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-28-alex.hung@amd.com
13 daysdrm/amd/display: Add bypass COLOR PIPELINEHarry Wentland
Add the default Bypass pipeline and ensure it passes the kms_colorop test plane-XR30-XR30-bypass. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-27-alex.hung@amd.com
13 daysdrm/amd/display: Ignore deprecated props when plane_color_pipeline setHarry Wentland
When the plane_color_pipeline bit is set we should ignore deprecated properties, such as COLOR_RANGE and COLOR_ENCODING. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-26-alex.hung@amd.com
13 daysdrm/amd/display: Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detectionIvan Lipski
[WHY & HOW] Fix the typo of the else-if condition from ATOM_DEVICE_CRT1_SUPPORT to ATOM_DEVICE_CRT2_SUPPORT. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Add cursor offload abort to the new HWSS pathNicholas Kazlauskas
[HOW] If cursor attributes or position are passed into DC via a stream update and we take the newer HWSS paths then it's possible that the update races with cursor offloading if it's enabled. This can cause the cursor to remain on the screen if no further updates come in if it results in HW cursor support being disabled. [HOW] Add the abort into the HWSS path so that cursor offloading doesn't attempt to reprogram the cursor with outdated params. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Increase EDID read retriesMario Limonciello (AMD)
[WHY] When monitor is still booting EDID read can fail while DPCD read is successful. In this case no EDID data will be returned, and this could happen for a while. [HOW] Increase number of attempts to read EDID in dm_helpers_read_local_edid() to 25. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Fix dereference-before-check for dc_linkSrinivasan Shanmugam
The function dereferences amdgpu_dm_connector->dc_link early to initialize verified_link_cap and dc, but later still checks amdgpu_dm_connector->dc_link for NULL in the analog path. This late NULL check is redundant, introduce a local dc_link pointer, use it consistently, and drop the superfluous NULL check while using dc_link->link_id.id instead. The function uses dc_link at the very beginning without checking if it is NULL. But later in the code, it suddenly checks if dc_link is NULL. This check is too late to be useful, because the code has already used dc_link earlier. So this NULL check does nothing. We simplify the code by storing amdgpu_dm_connector->dc_link in a local dc_link variable and using it throughout the function. Since dc_link is already dereferenced early, the later NULL check is unnecessary and is removed. Fixes the below: amdgpu_dm_connector_get_modes(): variable dereferenced before check 'amdgpu_dm_connector->dc_link' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 8845 &amdgpu_dm_connector->dc_link->verified_link_cap; 8846 const struct dc *dc = amdgpu_dm_connector->dc_link->dc; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Dereference ... 8856 8857 if (amdgpu_dm_connector->dc_sink && 8858 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Checked too late. Presumably this NULL check could be removed? ... Fixes: d46e422f65ae ("drm/amd/display: Cleanup uses of the analog flag") Reported by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Timur Kristóf <timur.kristof@gmail.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Don't change brightness for disabled connectorsMario Limonciello (AMD)
[WHY] When a laptop lid is closed the connector is disabled but userspace can still try to change brightness. This doesn't work because the panel is turned off. It will eventually time out, but there is a lot of stutter along the way. [How] Iterate all connectors to check whether the matching one for the backlight index is enabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Fix logical vs bitwise bug in get_embedded_panel_info_v2_1()Dan Carpenter
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4 then the last bit is always 1 so this code always sets .H_SYNC_POLARITY and .V_SYNC_POLARITY to true. This code is instead intended to check if the ATOM_HSYNC_POLARITY or ATOM_VSYNC_POLARITY flags are set and reverse the result. In other words, it's supposed to be a logical negate instead of a bitwise negate. Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysdrm/amd/display: Check NULL before accessingAlex Hung
[WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
13 daysRevert "drm/amd/display: Move setup_stream_attribute"Alex Deucher
This reverts commit 2681bf4ae8d24df950138b8c9ea9c271cd62e414. This results in a blank screen on the HDMI port on some systems. Revert for now so as not to regress 6.18, can be addressed in 6.19 once the issue is root caused. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652 Cc: Sunpeng.Li@amd.com Cc: ivan.lipski@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-21Merge tag 'v6.18-rc6' into drm-nextDave Airlie
Linux 6.18-rc6 Backmerge in order to merge msm next Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-11-18drm/amd/display: Move analog check to dce110_hwseqTimur Kristóf
Instead of checking that the signal is analog before calling the HWSS disable_audio_stream() function to disable audio, move the check inside the HWSS function. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-5-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Cleanup early return in construct_phyTimur Kristóf
Match pre-existing patterns in the DC code base. Instead of returning early from the construct_phy() function, add a label at the end and use goto to jump there. Additionally, respect the DC logger and let it log the function even when it returns early. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-4-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Cleanup uses of the analog flagTimur Kristóf
In the detect_link_and_local_sink() function, do not modify the EDID capabilities of the display based on the connector. Instead, respect the analog flag better and when the analog flag is set, check that the connector indeed supports analog displays. Suggested-by: Ray Wu <Ray.Wu@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20251113163348.137315-3-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Fix warning for analog stream encodersTimur Kristóf
Fixes the following warning that some users are reporting with some kernel configurations: "positional initialization of field in 'struct' declared with 'designated_init' attribute" Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20251113163348.137315-2-timur.kristof@gmail.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: dc_hw_sequencer.c: remove kernel-doc commentsRandy Dunlap
Change comments from kernel-doc style "/**" to normal C comments "/*" since the comments are not in kernel-doc format. This fixes around 39 kernel-doc warnings like this one: drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c:1322: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511062036.Ry8Z2APc-lkp@intel.com/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Promote DC to 3.2.359Taimur Hassan
This version brings along the following updates: - Add interface to capture expected HW state from SW state - Add panel Replay capability detection, DPCD reading, and enablement logic - Re-check seamless boot enablement on subsequent dc_commit_streams - Improve DPCD link capability retrieval with increased retries and per-retry delays - Add HPD filter for HDMI - Add pipe topology history tracking to DC - Fix MST initialization on resume when switching from SST to MST during suspend - Fix double cursor on DCN20 & DCN30 in non-native scaling - Check DCCG_AUDIO_DTO2 register mask before access - Fix pbn to kbps conversion Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Ignore Coverity false positiveTaimur Hassan
[Why&How] Ignore Coverity false positive analysis in the dmub_cmd.h Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Fix pbn to kbps ConversionFangzhi Zuo
[Why] Existing routine has two conversion sequence, pbn_to_kbps and kbps_to_pbn with margin. Non of those has without-margin calculation. kbps_to_pbn with margin conversion includes fec overhead which has already been included in pbn_div calculation with 0.994 factor considered. It is a double counted fec overhead factor that causes potential bw loss. [How] Add without-margin calculation. Fix fec overhead double counted issue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Check DCCG_AUDIO_DTO2 register mask existCharlene Liu
[Why&How] Check DCCG_AUDIO_DTO2 register mask exist before access. Also, add a existing DIO_CLOCK_control register for later use. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add null pointer check in link_dpmsCharlene Liu
[why] Check that the stream exists to add link->local_sink null pointer access protection. Reviewed-by: Harold Sun <harold.sun@amd.com> Reviewed-by: Ethan Cheung <ethan.cheung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5Ivan Lipski
[Why] On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5, while it's still powered on, the cached cursor_state (dpp_base->pos.cur0_ctl.bits.cur0_enable) and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a double cursor in full screen with non-native scaling. [How] Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673 Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add pipe topology history to dcNicholas Carbones
[Why] There is no way to check pipe topology update history through a dump. [How] Add a topology history structure to dc with snapshots of the most recent pipe topology updates. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Add an HPD filter for HDMIIvan Lipski
[Why] Some monitors perform rapid “autoscan” HPD re‑assertions right after a disconnect or powersaving mode enablement. These appear as a quick disconnect→reconnect with an identical EDID. Since Linux has no HDMI hotplug detection (HPD) filter, these quick reconnects are seen as hotplug events, which can unintentionally wake a system with DPMS off. An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876 Such 'fake reconnects' are considered when the interval between a disconnect and a connect is within 1500ms (experimentally chosen using several monitors), and the two connections have the same EDID. [How] Implement a time-based debounce mechanism: 1. On HDMI disconnect detection, instead of immediately processing the HPD event, save the current sink and schedule delayed work (default 1500ms) 2. If another HDMI disconnect HPD event arrives during the debounce period, it reschedules the pending work, ensuring only the final state is processed. 3. When the debounce timer expires, re-detect the display and compare the new sink with the cached one using EDID comparison. 4. If sinks match (same EDID), this was a spontaneous HPD toggle: - Update connector state internally - Skip hotplug event to prevent desktop rearrangement If sinks differ, this was a real display change: - Process normally with the hotplug event The debounce delay is configurable via module parameter 'hdmi_hpd_debounce_delay_ms'. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Increase DPCD read retriesMario Limonciello (AMD)
[Why] Empirical measurement of some monitors that fail to read EDID while booting shows that the number of retries with a 30ms delay between tries is as high as 16. [How] Increase number of retries to 20. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Move sleep into each retry for retrieve_link_cap()Mario Limonciello (AMD)
[Why] When a monitor is booting it's possible that it isn't ready to retrieve link caps and this can lead to an EDID read failure: ``` [drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed. amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read. ``` [How] Rather than msleep once and try a few times, msleep each time. Should be no changes for existing working monitors, but should correct reading caps on a monitor that is slow to boot. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Re-check seamless boot can be enabled or notPaul Hsieh
[Why] If the seamless boot feature has already been enabled, and dc_commit_streams is called again before receiving a flip, the driver will adjust the engine clock without turning off the screen, which will cause garbage to occur. However, in reality, the Pixel Clock from the first dc_commit_streams and the second dc_commit_streams are different. [How] If the apply seamless boot flag in the previous stream has not been cleared, and dc_commit_streams is received again, we need to recheck whether seamless boot should be disabled Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-18drm/amd/display: Get panel replay capability from DPCDJack Chang
[Why&How] Read Panel replay caps from DPCD when retrieving link capability Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-09 14:18:37 +0000