| Age | Commit message (Collapse) | Author |
|---|
|
On SI GPUs, the SMC needs to be aware of whether or not the VCE1
is used. The VCE1 is enabled/disabled through the DPM code.
Also print VCE clocks in amdgpu_pm_info.
Users can inspect the current power state using:
cat /sys/kernel/debug/dri/<card>/amdgpu_pm_info
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The contents of si_dpm.h seem to have been copied from the
old radeon driver, including a lot of structs and fields which
were only relevant to GPU generations even older than SI.
A lot of these can be deleted without causing much churn to the
actual SI DPM code. Let's delete them to make the code easier
to understand.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On various SI GPUs, a flickering can be observed near the bottom
edge of the screen when using a single 4K 60Hz monitor over DP.
Disabling MCLK switching works around this problem.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This code isn't needed anymore as we collect the same information
into pm_display_cfg instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
They are part of a power state too and should be printed
alongside the rest of the data from the power state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Port of commit 227545b9a08c ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The SMC can take an excessive amount of time to process some
messages under some conditions.
Background:
Sending a message to the SMC works by writing the message into
the mmSMC_MESSAGE_0 register and its optional parameter into
the mmSMC_SCRATCH0, and then polling mmSMC_RESP_0. Previously
the timeout was AMDGPU_MAX_USEC_TIMEOUT, ie. 100 ms.
Increase the timeout to 200 ms for all messages and to 1 sec for
a few messages which I've observed to be especially slow:
PPSMC_MSG_NoForcedLevel
PPSMC_MSG_SetEnabledLevels
PPSMC_MSG_SetForcedLevels
PPSMC_MSG_DisableULV
PPSMC_MSG_SwitchToSwState
This fixes the following problems on Tahiti when switching
from a lower clock power state to a higher clock state, such
as when DC turns on a display which was previously turned off.
* si_restrict_performance_levels_before_switch would fail
(if the user previously forced high clocks using sysfs)
* si_set_sw_state would fail (always)
It turns out that both of those failures were SMC timeouts and
that the SMC actually didn't fail or hang, just needs more time
to process those.
Add a warning when there is an SMC timeout to make it easier to
identify this type of problem in the future.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_*() macros can show the device a message came from.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_*() macros can show the device a message came from.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
legacy-pm, kv-dpm and si-dpm have prints while changing power states
that don't have a level and thus are printed by default. These are
not useful at runtime for most people, so decrease them to debug.
Reported-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4322
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
PS: checkpatch.pl is complaining about the presence of a space at the
start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716
This is propably because this file uses (two) spaces and not tabs.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace defines for the ones under smu_6_0_d.h and smu_6_0_sh_mask.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To be able to remove as much duplicated defines, the different files
containing definitions, shifts and masks must be properly included.
Once done, the code will be migrated where needed to shifts and masks and
proper defines, before removing useless defines in the end.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
resume and irq handler happily races in set_power_state()
* amdgpu_legacy_dpm_compute_clocks() needs lock
* protect irq work handler
* fix dpm_enabled usage
v2: fix clang build, integrate Lijo's comments (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2524
Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> # on Oland PRO
Signed-off-by: chr[] <chris@rudorff.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of is_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We dont need to set the functions to NULL which arent
needed as global structure members are by default
set to zero or NULL for pointers.
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the dummy soft_reset functions for all
ip blocks.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the dummy wait_for_idle functions for all
ip blocks.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This resolves the unchecded return value warning reported by Coverity.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adds bounds check for sumo_vid_mapping_entry.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3392
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
refine pmfw/smu firmware loading
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since gmc_pg is false, setting mcFlags with SISLANDS_SMC_MC_PG_EN cannot be reach.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enum asic_type always greater than or equal CHIP_TAHITI.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Execution cannot reach this statement: case POWER_STATE_TYPE_BALAN.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86.
This causes hangs on SI when DC is enabled and errors on driver
reboot and power off cycles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3216
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2755
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The amdgpu_free_extended_power_table is called in every error-handling
paths of amdgpu_parse_extended_power_table. However, after the following
call chain of returning:
amdgpu_parse_extended_power_table
|-> kv_dpm_init / si_dpm_init
(the only two caller of amdgpu_parse_extended_power_table)
|-> kv_dpm_sw_init / si_dpm_sw_init
(the only caller of kv_dpm_init / si_dpm_init, accordingly)
|-> kv_dpm_fini / si_dpm_fini
(goto dpm_failed in xx_dpm_sw_init)
|-> amdgpu_free_extended_power_table
As above, the amdgpu_free_extended_power_table is called twice in this
returning chain and thus a double-free is triggered. Similarily, the
last kfree in amdgpu_parse_extended_power_table also cause a double free
with amdgpu_free_extended_power_table in kv_dpm_fini.
Fixes: 84176663e70d ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:
kv_parse_power_table
|-> kv_dpm_init
|-> kv_dpm_sw_init
|-> kv_dpm_fini
The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
