summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_dp_link_training.c
AgeCommit message (Collapse)Author
2025-10-31drm/i915/display: switch to intel_display_utils.hJani Nikula
The remaining utils display needs from i915_utils.h are primarily MISSING_CASE() and fetch_and_zero(), with a couple of i915_inject_probe_failure() uses. To avoid excessive churn, add duplicates of MISSING_CASE() and fetch_and_zero() to intel_display_utils.h, and switch display to use the display utils. As long as there are display files that include i915_drv.h, which includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and fetch_and_zero() in both utils headers. We can remove them once display no longer depends on i915_drv.h. A couple of files in display still need i915_utils.h for i915_inject_probe_failure(). Annotate this. They will be handled separately. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-10-31drm/i915: split out separate files for jiffies timeout and wait helpersJani Nikula
Add i915_jiffies.h and intel_display_jiffies.h for jiffies timeout and wait helpers, and use them separately from i915 and display. This helps reduce the display dependency on i915_utils.h. Long term, both msecs_to_jiffies_timeout() and wait_remaining_ms_from_jiffies() really belong in core kernel headers, but for now unblock display refactoring. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patch.msgid.link/d8bc62b3a81afa05c849dde9b0f633572eaf5611.1761146196.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-09-04drm/i915/dp: use generic poll_timeout_us() instead of wait_for() in link ↵Jani Nikula
training Prefer generic poll helpers over i915 custom helpers. The functional change is losing the exponentially growing sleep of wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us. Use an arbitrary constant 500 us sleep instead. The timeout remains at 500 ms. Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/29ab4738758fe844dc1323c4a59d5d6bdcf87308.1756383233.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-07-25drm/i915/dp: Fix disabling training pattern at end of UHBR link trainingImre Deak
The Fixed: commit below overlooked the fact that intel_dp_link_train_all_phys() is only used for non-UHBR link rates, but intel_dp_stop_link_train() is used for both non-UHBR and UHBR link rates. Hence, after removing the disabling of the training pattern from intel_dp_stop_link_train(), the commit missed adding this back to the end of UHBR link training in intel_dp_128b132b_link_train(). This left the sink in link training mode at the end of an UHBR rate link training. Fix things by disabling the training pattern at the end of UHBR link training as well. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 11fab5a2a1ad ("drm/i915/dp: Clear DPCD training pattern before transmitting the idle pattern") Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250724182900.160891-1-imre.deak@intel.com
2025-07-17drm/i915/dp: Make .set_idle_link_train() mandatoryVille Syrjälä
Everyone implements the .set_idle_link_train() hook now. Just make it mandatory. Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-8-ville.syrjala@linux.intel.com
2025-07-17drm/i915/dp: Move intel_dp_training_pattern()Ville Syrjälä
Move intel_dp_training_pattern() upwards to avoid the forward declaration for the POST_LT_ADJ_REQ stuff. Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-6-ville.syrjala@linux.intel.com
2025-07-17drm/i915/dp: Have intel_dp_get_adjust_train() tell us if anything changedVille Syrjälä
In order to implement the POST_LT_ADJ_REQ sequence we need to know whether the sink actually requested a changed to the vswing/pre-emph values. Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-5-ville.syrjala@linux.intel.com
2025-07-17drm/i915/dp: Clear DPCD training pattern before transmitting the idle patternVille Syrjälä
We are supposed to switch off the training pattern in DPCD before we start transmitting the idle pattern. For LTTPRs we do that correctly, but for the sink DPRX we only do this correctly for some platforms. On pre-HSW (where we don't implement the .set_idle_link_train() hook), we directly switch from transmitting the training pattern to normal pixel transmission (the hardware should hopefully guarantee that the minimum number of required idle patters will be transmitted during this transition). The DPCD write correctly precedes the actual switch away from the training pattern. For HSW+ we start transmitting the idle pattern earlier, and only switch off the DPCD training pattern after we switch from the idle pattern to normal pixel transmission. Adjust the code to disable the DPCD training pattern before we start transmitting the idle pattern. v2: Tweak the commit message a bit Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-4-ville.syrjala@linux.intel.com
2025-04-15Merge tag 'drm-intel-next-2025-04-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Cross-subsystem Changes: - Update GVT MAINTAINERS (Jani) Driver Changes: - Updates for xe3lpd display (Gustavo) - Fix link training interrupted by HPD pulse (Imre) - Watermark bound checks for DSC (Ankit) - VRR Refactor and other fixes and improvements (Ankit) - More conversions towards intel_display struct (Gustavo, Jani) - Other clean-up patches towards a display separation (Jani) - Maintain asciibetical order for HAS_* macros (Ankit) - Fixes around probe/initialization (Janusz) - Fix build and doc build issue (Yue, Rodrigo) - DSI related fixes (Suraj, William, Jani) - Improve DC6 entry counter (Mohammed) - Fix xe2hpd memory type identification (Vivek) - PSR related fixes and improvements (Animesh, Jouni) - DP MST related fixes and improvements (Imre) - Fix scanline_offset for LNL+/BMG+ (Ville) - Some gvt related fixes and changes (Ville, Jani) - Some PLL code adjustment (Ville) - Display wa addition (Vinod) - DRAM type logging (Lucas) - Pimp the initial FB readout (Ville) - Some sagv/bw cleanup (Ville) - Remove i915_display_capabilities debugfs entry (Jani) - Move PCH type to display caps debugfs entry (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
2025-04-07drm/i915/dp: Rename intel_dp::link_trained to link.activeImre Deak
The intel_dp::link_trained flag indicates whether the link is active, regardless of whether the link training passed or failed. For clarity rename the flag to 'active'. While at it move the flag under intel_dp::link. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
2025-03-13drm/i915/display: Enable MSA Ignore Timing PAR only when in not fixed_rr modeAnkit Nautiyal
MSA Ignore Timing PAR enable is set in the DP sink when we enable variable refresh rate. Currently for link training we depend on flipline to decide whether we want to ignore the msa timings. With fixed refresh rate we will still fill the flipline in all cases whether panel supports VRR or not. Change the condition for link training to ignore the msa timings if vrr.in_range. v2: Add more documentation and a #TODO for readout of vrr.in_range. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250311093751.1329043-9-ankit.k.nautiyal@intel.com
2025-03-11drm/i915/dp: Queue a link check after link training is completeImre Deak
After link training - both in case of a passing and failing LT result - a work is scheduled to check the link state. This check should take place after the link training is completed by disabling the link training pattern and setting intel_dp::link_trained=true. Atm, the work is scheduled before these steps, which may result in checking the link state too early (and thus not retraining the link as expected). Fix the above by scheduling the link check work after link training is complete. v2: - Add MAX_SEQ_TRAIN_FAILURES instead of open-coding it. (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250305114820.3523077-2-imre.deak@intel.com
2025-03-11drm/i915/dp: Fix link training interrupted by a short HPD pulseImre Deak
During Display Port link training the handling of HPD pulses should be prevented, as that handling can interfere with the link training: - Accessing DPCD registers outside the range of link training registers are not allowed by the Standard (see DP Standard v2.1, 3.5.2.16.1, 3.6.6.1). The pulse handler reads the DPRX capability registers, which are outside of the allowed range. - Switching of the LTTPR transparent/non-transparent mode may reset the LTTPRs on the link, thus aborting any ongoing link training. The pulse handler does set the LTTPR mode, thus it could unexpectedly abort the ongoing link training. Block/unblock the HPD pulse handling for the duration of the link training to prevent the above DPCD register accesses / LTTPR mode change. Apart from the above scenarios, there are other ways a non-link training DPCD register could be accessed during link training: via the DRM AUX device node, or via DPCD register probing (as performed by drm_dp_dpcd_probe()). These will be addressed by a follow-up change. v2: Rebase on the intel_hpd_suspend/resume -> intel_hpd_block/unblock() rename change. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-5-imre.deak@intel.com
2025-03-11Merge tag 'drm-intel-next-2025-03-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.15: Features and functionality: - FBC dirty rectangle support for display version 30+ (Vinod) - Update plane scalers via DSB based commits (Ville) - Move runtime power status info to display power debugfs (Jani) Refactoring and cleanups: - Convert i915 and xe to DRM client setup (Thomas) - Refactor and clean up CDCLK/bw/dbuf readout/sanitation (Ville) - Conversions from drm_i915_private to struct intel_display (Jani, Suraj) - Refactor display reset for better separation between display and core (Jani) - Move panel fitter code together (Jani) - Add mst and hdcp sub-structs to display structs for clarity (Jani) - Header refactoring to clarify separation between display and i915 core (Jani) Fixes: - Fix DP MST max stream count to match number of pipes (Jani) - Fix encoder HW state readout of DP MST UHBR (Imre) - Fix ICL+ combo PHY cursor and coeff polarity programming (Ville) - Fix pipeDMC and ATS fault handling (Ville) - Display workarounds (Gustavo) - Remove duplicate forward declaration (Vinod) - Improve POWER_DOMAIN_*() macro type safety (Gustavo) - Move CDCLK post plane programming later (Ville) DRM core changes: - Add client-hotplug helper (Thomas) - Send pending hotplug events after client resume (Thomas) - Add fb_restore and fb_set_suspend fb helper hooks (Thomas) - Remove struct fb_probe fb helper hook (Thomas) - Add const qualifier to drm_atomic_helper_damage_merged() (Vinod) Xe driver changes: - Convert i915 and xe to DRM client setup (Thomas) - Refactor i915 compat headers (Jani) - Fix fbdev GGTT mapping handling (Maarten) - Figure out pxp instance from the gem object (Jani) Merges: - Backmerge drm-next to fix conflicts with drm-xe-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o6y9gpub.fsf@intel.com
2025-03-03drm/i915: relocate intel_plane_ggtt_offset() to intel_atomic_plane.cJani Nikula
With the primary goal of removing #include "i915_vma.h" from intel_display_types.h, move intel_plane_ggtt_offset() to a proper function in intel_atomic_plane.c. This reveals tons of implicit dependencies all over the place that we pulled in via i915_vma.h. Fix the fallout. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/70ac6d19518f355abf37ac8c4b0f1d18878be28c.1740412806.git.jani.nikula@intel.com
2025-02-28Merge tag 'drm-misc-next-2025-02-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.15: Cross-subsystem Changes: bus: - mhi: Avoid access to uninitialized field Core Changes: - Fix docmentation dp: - Add helpers for LTTPR transparent mode sched: - Improve job peek/pop operations - Optimize layout of struct drm_sched_job Driver Changes: arc: - Convert to devm_platform_ioremap_resource() aspeed: - Convert to devm_platform_ioremap_resource() bridge: - ti-sn65dsi86: Support CONFIG_PWM tristate i915: - dp: Use helpers for LTTPR transparent mode mediatek: - Convert to devm_platform_ioremap_resource() msm: - dp: Use helpers for LTTPR transparent mode nouveau: - dp: Use helpers for LTTPR transparent mode panel: - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 repaper: - Fix integer overflows stm: - Convert to devm_platform_ioremap_resource() vc4: - Convert to devm_platform_ioremap_resource() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250227094041.GA114623@linux.fritz.box
2025-02-27Merge tag 'drm-intel-next-2025-02-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull for v6.15: Features and functionality: - Enable DP 128b/132b SST DSC (Jani, Imre) - Allow DSB to perform commits when VRR is enabled (Ville) - Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit) - Allow DSB usage when PSR is enabled on LNL+ (Jouni) - Enable Panel Replay mode change without full modeset (Jouni) - Enable async flips with compressed buffers on ICL+ (Ville) - Support luminance based brightness control via DPCD for eDP (Suraj) - Enable VRR enable/disable without full modeset (Mitul, Ankit) - Add debugfs facility for force testing HDCP 1.4 (Suraj) - Add scaler tracepoints, improve plane tracepoints (Ville) - Improve DMC wakelock debugging facilities (Gustavo) - Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo) - Provide more information on display faults (Ville) Refactoring and cleanups: - Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre) - Joiner and Y plane reorganization (Ville) - Move HDCP debugfs to intel_hdcp.c (Jani) - Clean up and unify LSPCON interfaces (Jani) - Move code out of intel_display.c to reduce its size (Ville) - Clean up and simplify DDI port enabling/disabling (Imre) - Make LPT LP a dedicated PCH type, refactor (Jani) - Simplify DSC range BPG offset calculation (Ankit) - Scaler cleanups (Ville) - Remove unused code from GVT (David Alan Gilbert) - Improve plane debugging (Ville) - DSB and VRR refactoring (Ville) Fixes: - Check if vblank is sufficient for DSC prefill and scaler (Mitul) - Fix Mesa clear color alignment regression (Ville) - Add missing TC DP PHY lane stagger delay (Imre) - Fix DSB + VRR usage for PTL+ (Ville) - Improve robustness of display VT-d workarounds (Ville) - Fix platforms for dbuf tracker state service programming (Ravi) - Fix DMC wakelock support conditions (Gustavo) - Amend DMC wakelock register ranges (Gustavo) - Disable the Common Primary Timing Generator (CMTG) (Gustavo) - Enable C20 PHY SSC (Suraj) - Add workaround for DKL PHY DP mode write (Nemesa) - Fix build warnings on clamp() usage (Guenter Roeck, Ankit) - Fix error handling while adding a connector (Imre) - Avoid full modeset at probe on vblank delay mismatches (Ville) - Fix encoder HDMI check for HDCP line rekeying (Suraj) - Fix HDCP repeater authentication during topology change (Suraj) - Handle display PHY power state reset for power savings (Mika) - Fix typos all over the place (Nitin) - Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar) - Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre) - Do not hardcode LSPCON settle timeout (Giedrius Statkevičius) Xe driver changes: - Re-use display vmas when possible (Maarten) - Remove double pageflip (Maarten) - Enable DP tunneling (Imre) - Separate i915 and xe tracepoints (Ville) DRM core changes: - Increase DPCD eDP display control CAP size to 5 bytes (Suraj) - Add DPCD eDP version 1.5 definition (Suraj) - Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius) Merges: - Backmerge drm-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
2025-02-25drm/i915/dp: Use the generic helper to control LTTPR transparent modeAbel Vesa
LTTPRs operating modes are defined by the DisplayPort standard and the generic framework now provides a helper to switch between them, which is handling the explicit disabling of non-transparent mode and its disable->enable sequence mentioned in the DP Standard v2.0 section 3.6.6.1. So use the new drm generic helper instead as it makes the code a bit cleaner. Since the driver specific implementation holds the lttrp_common_caps, if the call to the drm generic helper fails, the lttrp_common_caps need to be updated as the helper has already rolled back to transparent mode. Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-3-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25Merge tag 'v6.14-rc4' into drm-nextDave Airlie
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next can base on rc4. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-02-19drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-04drm/i915/lttpr: Enable Extended Wake TimeoutSuraj Kandpal
Usually retimers take around 30 to 40ms to exit all devices from sleep state. Extended wake timeout mechanism helps to give that additional time. --v2 -Grant the requested time only if greater than 1ms [Arun/Jani] -Reframe commit message [Arun] --v3 -Move the function to drm_core [Dmitry/Jani] Spec: DP v2.1 Section 3.6.12.3 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-4-suraj.kandpal@intel.com
2025-01-23drm/i915/display: fix typos in i915/display filesNitin Gote
Fix all typos in files under drm/i915/display reported by codespell tool. v2: - Include british and american spelling, as those are not typos. - Fix commenting style. <Jani> v3: Fix "In case" wrongly capitalized and also fix comment style. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-8-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-18drm/i915/display: drop unnecessary i915_drv.h includesJani Nikula
Now that we don't include i915_drv.h via any headers from display, we can reliably remove unnecessary i915_drv.h includes and be sure they're not indirectly included. Add other includes where needed. v2: Fix 32-bit build Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217132147.2008057-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-16drm/i915/dp: finish link training conversion to struct intel_displayJani Nikula
Convert the final stragglers to struct intel_display now that we have platform identification via it too. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/14a214fc358eafba8d57c25e0d26c8c35856dc89.1734083244.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-16drm/i915/dp: convert interfaces to struct intel_displayJani Nikula
Convert the intel_dp.[ch] external interfaces to struct intel_display. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7d55f5fd9fc0619be3113098a49259d5374013c6.1734083244.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-11-18drm/i915/dp: Include the time taken by AUX Tx for timeoutArun R Murthy
As per DP spec the timeout for LANE_CHANNEL_EQ_DONE is 400ms. But this timeout value is exclusively for the Aux RD Interval and excludes the time consumed for the AUX Tx (i.e reading/writing FFE presets). Add another 50ms for these AUX Tx to the 400ms timeout. Ref: "Figure 3-52: 128b132b DP DPTC LANEx_CHANNEL_EQ_DONE Sequence" of DP2.1a spec. Co-developed-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240925034432.1777029-4-arun.r.murthy@intel.com
2024-11-18drm/i915/dp: read Aux RD interval just before setting the FFE presetArun R Murthy
Figure 3-52: 128b132b DP DPTC LANEx_CHANNEL_EQ_DONE Sequence of DP2.1a spec. After reading LANEx_CHANNEL_EQ_DONE, read the FFE presets. AUX_RD_INTERVAL and then write the new FFE presets. v4: Read AUX_RD_INTERVAL before get/set TX FFE preset (Jani) Co-developed-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241011045825.2629469-1-arun.r.murthy@intel.com
2024-11-18drm/i915/dp: use fsleep instead of usleep_range for LTArun R Murthy
Sleeping for < 10us use udelay, for 10us to 20ms use usleep_range() and for > 10ms use msleep. flseep() will call the particular API based on the above condition. (Documentation/timers/timers-howto.rst) Aux RD Interval value depends on the value read from the dpcd register which is updated from the sink device, hence use flseep. Co-developed-by: Srikanth V NagaVenkata <nagavenkata.srikanth.v@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240925034432.1777029-2-arun.r.murthy@intel.com
2024-09-11drm/i915/display: Use intel_attached_dp instead of local implementationJouni Högander
Link training code contains local "connector to intel_dp" implementation. This was added due to missing MST handling in intel_attached_dp. Missing MST support is now fixed in intel_attached_dp. We can now change link training code to use that instead of local intel_connector_to_intel_dp. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240906070033.289015-3-jouni.hogander@intel.com
2024-09-11drm/i915/dp: Dump the LTTPR PHY descriptorsImre Deak
Dump the descriptor of the detected LTTPRs in non-transparent mode to help the debugging related to LTTPRs easier. v2: Use drm_dp_dump_lttpr_desc() instead of the driver specific equivalent. v3: Add empty line between license and header section. (Ankit) v4: Don't include drm_dp_helper.h twice. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240909135627.2926906-1-imre.deak@intel.com
2024-09-05drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where neededJani Nikula
Use a forward declaration for struct cec_notifier instead of including media/cec-notifier.h in intel_display_types.h, and only include it where needed. Also realize that a lot of places depend on including linux/debugfs.h via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and include that too where needed. v2: hsw_ips.c also needs debugfs.h (kernel test robot) Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
2024-09-03drm/i915/dp: convert intel_dp_link_training.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_dp_link_training.[ch] to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72b202e75f5a7ecc84a906f1c49d21dbe24fb7c2.1725012870.git.jani.nikula@intel.com
2024-07-31drm/i915/dp_mst: Enable LT fallback between UHBR/non-UHBR link ratesImre Deak
Enable switching between UHBR and non-UHBR link rates on MST links when reducing the link parameters after an LT failure. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-15-imre.deak@intel.com
2024-07-31drm/i915/dp_mst: Reduce the link parameters in BW order after LT failuresImre Deak
On MST links - at least for some MST branch devices - the list of modes returned to users on an enabled link depends on the current link rate/lane count parameters (besides the DPRX link capabilities, any MST branch BW limit and the maximum link parameters reduced after LT failures). In particular the MST branch BW limit may depend on the link rate/lane count parameters programmed to DPCD. After an LT failure and limiting the maximum link parameters accordingly, users should see a mode list reflecting these new limits. However with the current fallback order this isn't ensured, as the new limit could allow for modes requiring a higher link BW, but these modes will be filtered out due to the enabled link's lower link BW. Ensure that the mode list changes in a consistent way after a link training failure and reducing the link parameters by changing the fallback order on MST links to happen in BW order. v2: - s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS and s/num_common_lane_counts/num_common_lane_configs to make the difference wrt. max lane counts clearer. (Suraj) - Add a TODO comment to make the SST fallback logic work the same way as MST. (Arun) - Use sort_r()'s default swap function instead of a custom one. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729144458.2763667-1-imre.deak@intel.com
2024-07-31drm/i915/dp: Add helpers to set link training mode, BW parametersImre Deak
Add helpers to set the link mode and BW parameters. These are required by a follow-up patch setting the parameters for a disabled link. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-9-imre.deak@intel.com
2024-07-31drm/i915/dp: Add a separate function to reduce the link parametersImre Deak
A follow-up patch will add an alternative way to reduce the link parameters in BW order on MST links, prepare for that here. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-8-imre.deak@intel.com
2024-07-22drm/i915/dp: Require a valid atomic state for SST link trainingImre Deak
After the previous patch link training happens always with a valid atomic state, so remove the NOTE comments and asserts which required a valid state only for DP-MST and allowed for a NULL state for DP-SST. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712135724.660399-2-imre.deak@intel.com
2024-07-11drm/i915/dp: Keep cached LTTPR mode up-to-dateImre Deak
Nothing depends on the cached LTTPR mode, however for consistency keep it up-to-date with the value programmed to the DPCD register. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-5-imre.deak@intel.com
2024-07-11drm/i915/dp: Reset cached LTTPR count if number of LTTPRs is unsupportedImre Deak
After detection the cached LTTPR count can be checked to determine if LTTPRs in non-transparent mode were detected. Reset the cached LTTPR count if the reported number of LTTPRs is invalid to ensure the above checks work as expected. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-4-imre.deak@intel.com
2024-07-11drm/i915/dp: Don't switch the LTTPR mode on an active linkImre Deak
Switching to transparent mode leads to a loss of link synchronization, so prevent doing this on an active link. This happened at least on an Intel N100 system / DELL UD22 dock, the LTTPR residing either on the host or the dock. To fix the issue, keep the current mode on an active link, adjusting the LTTPR count accordingly (resetting it to 0 in transparent mode). v2: Adjust code comment during link training about reiniting the LTTPRs. (Ville) Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Reported-and-tested-by: Gareth Yu <gareth.yu@intel.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10902 Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-3-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entry to get the link retrain disabled stateImre Deak
Add a connector debugfs entry showing if link retraining is disabled. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-22-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entry to force link retrainImre Deak
Add a connector debugfs entry to force retrain an active link. This can be used to test both custom link parameters (previously forced via the force_link_rate/lane_count entries) or link train failure scenarios (previously forced via the force_link_training_failure entry). The entry will autoreset after the link-retrain is complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-21-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entry to force link training failureImre Deak
Add a connector debugfs entry to force a failure during the following 1-2 link training. The entry will auto-reset after the specified link training events are complete. v2: Add the entry from intel_dp_link_training.c (Jani) v3: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-20-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entries to get the max link rate/lane countImre Deak
Add connector debugfs entries to get the maximum link rate and lane count. v2: Lock connection_mutex only for the required intel_dp state. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-19-imre.deak@intel.com
2024-06-13drm/i915/dp: Add debugfs entries to force the link rate/lane countImre Deak
Add connector debugfs entries to force the link rate/lane count to be used by a link training afterwards. These settings will be clamped to the supported, i.e. the source's and sink's common rate/lane count. After forcing the link rate/lane count reset the link training parameters and for a non-auto setting disable reducing the link parameters via the fallback logic. The former one can be used after testing link training failure scenarios - via debugfs entries added later - to reset the reduced link parameters after the test. v2: - Add the entries from intel_dp_link_training.c (Jani) - Rename the entries to i915_dp_set_link_rate/lane_count. v3: (Ville) - Rename the entries/struct fields to force_link_rate/lane_count. - Lock connection_mutex only for the required intel_dp state. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-18-imre.deak@intel.com
2024-06-13drm/i915/dp_mst: Enable link training fallback for MSTImre Deak
Reduce the link parameters after a link training failure for MST outputs, similarly to how this is done for SST. For now allow the reduction only by staying in the 8b/10b vs. 128b/132b mode. Enabling the mode switch is left for a follow-up patchset, after taking measures ensuring that the mode switch happens properly. In particular a rediscovery of the whole MST topology may be required for such a switch, see the References below. Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10970 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-17-imre.deak@intel.com
2024-06-13drm/i915/dp: Disable link retraining after the last fallback stepImre Deak
After a link training failure if the link parameters can't be further reduced, there is no point in trying to retrain the link in the driver. This avoids excessive retrain attempts after detecting a bad link, for instance while handling MST HPD IRQs, which is likely redundant as the link training failed already twice with the same minimum link parameters. Userspace can still try to retrain the link with these parameters via a modeset. While at it make the error message more accurate. v2: Move converting the error to a debug message to the relevant follow-up patch. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-15-imre.deak@intel.com
2024-06-13drm/i915/dp: Send a link training modeset-retry uevent to all MST connectorsImre Deak
Send a modeset-retry uevent to all connectors in the same MST topology after a link training failure and reduction of the link parameters. This matches the way the same uevent is sent after a DP tunnel BW allocation failure. v2: Add NOTE that the atomic state may not be valid for SST links and assert that it's valid for MST links. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-11-imre.deak@intel.com
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-09 22:34:40 +0000