| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
|
|
Make sure the queue slot is reset even if we failed termination so
we don't have garbage in the CS input interface after a reset. In
practice that's not a problem because we zero out all RW sections when
a hangs occurs, but it's safer to reset things manually, in case we
decide to not conditionally reload RW sections based on the type of
hang.
v4:
- Split the changes in two separate patches
v5:
- No changes
v6:
- Adjust the explanation in the commit message
- Drop the Fixes tag
- Put after the timeout changes and make the two patches independent
so one can be backported, and the other not
v7:
- Use the local group variable instead of dereferencing csg_slot->group
- Add Steve's R-b
v8:
- No changes
Signed-off-by: Ashley Smith <ashley.smith@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251113105734.1520338-3-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
The timeout logic provided by drm_sched leads to races when we try
to suspend it while the drm_sched workqueue queues more jobs. Let's
overhaul the timeout handling in panthor to have our own delayed work
that's resumed/suspended when a group is resumed/suspended. When an
actual timeout occurs, we call drm_sched_fault() to report it
through drm_sched, still. But otherwise, the drm_sched timeout is
disabled (set to MAX_SCHEDULE_TIMEOUT), which leaves us in control of
how we protect modifications on the timer.
One issue seems to be when we call drm_sched_suspend_timeout() from
both queue_run_job() and tick_work() which could lead to races due to
drm_sched_suspend_timeout() not having a lock. Another issue seems to
be in queue_run_job() if the group is not scheduled, we suspend the
timeout again which undoes what drm_sched_job_begin() did when calling
drm_sched_start_timeout(). So the timeout does not reset when a job
is finished.
v2:
- Fix syntax error
v3:
- Split the changes in two commits
v4:
- No changes
v5:
- No changes
v6:
- Fix a NULL deref in group_can_run(), and narrow the group variable
scope to avoid such mistakes in the future
- Add an queue_timeout_is_suspended() helper to clarify things
v7:
- No changes
v8:
- Don't touch drm_gpu_scheduler::timeout in queue_timedout_job()
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Ashley Smith <ashley.smith@collabora.com>
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251113105734.1520338-2-boris.brezillon@collabora.com
|
|
Log the number of pages and their sizes actually mapped/unmapped by
the IOMMU page table driver. Since a map/unmap op is often split in
several ops depending on the underlying scatter/gather table, add the
start address and the total size to the debugging logs in order to
help understand which batch an op is part of.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251114170303.2800-10-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add support for Mali-G1 GPUs (CSF architecture v14), introducing a new
panthor_hw_arch_v14 entry with reset and L2 power management operations
via the PWR_CONTROL block.
Mali-G1 introduces a dedicated PWR_CONTROL block for managing resets and
power domains. panthor_gpu_info_init() is updated to use this block for
L2, tiler, and shader domain present register reads.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-9-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add support for the 64-bit endpoint_req register introduced in CSF v4.0+
GPUs. Unlike a simple register widening, the 64-bit variant occupies the
next 64 bits after the original 32-bit field, requiring
version-dependent access.
This change introduces helper functions to read, write, and update the
endpoint_req register, ensuring correct handling on both pre-v4.0 and
v4.0+ firmwares.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-8-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add support for the GLB_REQ.STATE field introduced in CSF v4.1+, which
replaces the HALT bit to provide finer control over the MCU state. This
change implements basic handling for transitioning the MCU between
ACTIVE and HALT states on Mali-G1 GPUs.
The update introduces new helpers to issue the state change requests,
poll for MCU halt completion, and restore the MCU to an active state
after halting.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-7-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add helpers to issue reset commands through the PWR_CONTROL interface
and wait for reset completion using IRQ signaling. This enables support
for RESET_SOFT operations with timeout handling and status verification.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-6-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
This patch adds common helpers to issue power commands, poll
transitions, and validate domain state, then wires them into the L2
on/off paths.
The L2 power-on sequence now delegates control of the SHADER and TILER
domains to the MCU when allowed, while the L2 itself is never delegated.
On power-off, dependent domains beneath the L2 are checked, and if
necessary, retracted and powered down to maintain proper domain
ordering.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-5-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add the new panthor_pwr module, which provides basic power control
management for Mali-G1 GPUs. The initial implementation includes
infrastructure for initializing the PWR_CONTROL block, requesting and
handling its IRQ, and checking for PWR_CONTROL support based on GPU
architecture.
The patch also integrates panthor_pwr with the device lifecycle (init,
suspend, resume, and unplug) through the new API functions. It also
registers the IRQ handler under the 'gpu' IRQ as the PWR_CONTROL block
is located within the GPU_CONTROL block.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-4-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Introduce architecture-specific function pointers to support
architecture-dependent behaviours. This patch adds the following
function pointers and updates their usage accordingly:
- soft_reset
- l2_power_on
- l2_power_off
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-3-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
This patch adds the framework for binding to a specific panthor_hw
structure based on the architecture major value parsed from the GPU_ID
register. This is in preparation of enabling architecture-specific
behaviours based on GPU_ID. As such, it also splits the GPU_ID register
read operation into its own helper function.
This framework allows a single panthor_hw structure to be shared across
multiple architectures should there be minimal changes between them via
the arch_min and arch_max field of the panthor_hw_entry structure,
instead of duplicating the structure across multiple architectures.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-2-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
The kernel BOs unnecessarily got added to the external objects list
of drm_gpuvm, when mapping to GPU, which would have resulted in few
extra CPU cycles being spent at the time of job submission as
drm_exec_until_all_locked() loop iterates over all external objects.
Kernel BOs are private to a VM and so they share the dma_resv object of
the dummy GEM object created for a VM. Use of DRM_EXEC_IGNORE_DUPLICATES
flag ensured the recursive locking of the dummy GEM object was ignored.
Also no extra space got allocated to add fences to the dma_resv object
of dummy GEM object. So no other impact apart from few extra CPU cycles.
This commit sets the pointer to dma_resv object of GEM object of
kernel BOs before they are mapped to GPU, to prevent them from
being added to external objects list.
v2: Add R-bs and fixes tags
Fixes: 8a1cc07578bf ("drm/panthor: Add GEM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251120172118.2741724-1-akash.goel@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
Cross-subsystem Changes:
Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.
Core Changes:
- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.
Driver Changes:
Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.
Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/aRxtJC0D1pQUepF4@google.com
|
|
This commit addresses a memleak issue of panthor_vma (or drm_gpuva)
structure in Panthor driver, that can happen if the GPU page table
update operation to map the pages fail.
The issue is very unlikely to occur in practice.
v2: Add panthor_vm_op_ctx_return_vma() helper (Boris)
v3: Add WARN_ON_ONCE (Boris)
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251021081042.1377406-1-akash.goel@arm.com
|
|
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578bf ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
|
|
On SoCs where the GPU's power-domain is in charge of setting performance
levels, the OPP table of the GPU node will have already been populated
during said power-domain's attach_dev operation.
To avoid initialising an OPP table twice, only set the OPP regulator and
the OPPs from DT if there's no OPP table present.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-4-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
As it stands, panthor keeps a cached current frequency value for when it
wants to retrieve it. This doesn't work well for when things might
switch frequency without panthor's knowledge.
Instead, implement the get_cur_freq operation, and expose it through a
helper function to the rest of panthor.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-3-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Some platforms, such as i.MX95, utilize multiple power domains that need
to be attached explicitly. This patch ensures that the driver properly
attaches all available power domains using devm_pm_domain_attach_list().
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
Signed-off-by: Rain Yang <jiyu.yang@nxp.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251022092604.181752-1-jiyu.yang@oss.nxp.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578bf ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae118a ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
A previous change, "drm/panthor: Fix UAF race between device unplug and
FW event processing", fixes a real issue where new work was unexpectedly
queued after cancellation. This was fixed by a disable instead.
Apply the same disable logic to other device level async work on device
unplug as a precaution.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251029111412.924104-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138247 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b02a ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
amdxdna:
- Support reading last hardware error
Cross-subsystem Changes:
dma-buf:
- heaps: Create heap per CMA reserved location; Improve user-space documentation
Core Changes:
atomic:
- Clean up and improve state-handling interfaces, update drivers
bridge:
- Improve ref counting
buddy:
- Optimize block management
Driver Changes:
amdxdna:
- Fix runtime power management
- Support firmware debug output
ast:
- Set quirks for each chip model
atmel-hlcdc:
- Set LCDC_ATTRE register in plane disable
- Set correct values for plane scaler
bochs:
- Use vblank timer
bridge:
- synopsis: Support CEC; Init timer with correct frequency
cirrus-qemu:
- Use vblank timer
imx:
- Clean up
ivu:
- Update JSM API to 3.33.0
- Reset engine on more job errors
- Return correct error codes for jobs
komeda:
- Use drm_ logging functions
panel:
- edp: Support AUO B116XAN02.0
panfrost:
- Embed struct drm_driver in Panfrost device
- Improve error handling
- Clean up job handling
panthor:
- Support custom ASN_HASH for mt8196
renesas:
- rz-du: Fix dependencies
rockchip:
- dsi: Add support for RK3368
- Fix LUT size for RK3386
sitronix:
- Fix output position when clearing screens
qaic:
- Support dma-buf exports
- Support new firmware's READ_DATA implementation
- Replace kcalloc with memdup
- Replace snprintf() with sysfs_emit()
- Avoid overflows in arithmetics
- Clean up
- Fixes
qxl:
- Use vblank timer
rockchip:
- Clean up mode-setting code
vgem:
- Fix fence timer deadlock
virtgpu:
- Use vblank timer
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251021111837.GA40643@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
When pushing commits to drm-rust-next, we need to verify that the
patches pass rustfmt. Thus, pull in v6.18-rc2 for its rustfmt fix.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Instead of manually deferring cleanup of vm_bos, use the new GPUVM
infrastructure for doing so.
To avoid manual management of vm_bo refcounts, the panthor_vma_link()
and panthor_vma_unlink() methods are changed to get and put a vm_bo
refcount on the vm_bo. This simplifies the code a lot. I preserved the
behavior where panthor_gpuva_sm_step_map() drops the refcount right away
rather than letting panthor_vm_cleanup_op_ctx() do it later.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20251006-vmbo-defer-v4-2-30cbd2c05adb@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
This commit address a kernel panic issue that can happen if Userspace
tries to partially unmap a GPU virtual region (aka drm_gpuva).
The VM_BIND interface allows partial unmapping of a BO.
Panthor driver pre-allocates memory for the new drm_gpuva structures
that would be needed for the map/unmap operation, done using drm_gpuvm
layer. It expected that only one new drm_gpuva would be needed on umap
but a partial unmap can require 2 new drm_gpuva and that's why it
ended up doing a NULL pointer dereference causing a kernel panic.
Following dump was seen when partial unmap was exercised.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000
[000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
<snip>
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor]
sp : ffff800085d43970
x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000
x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000
x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180
x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010
x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c
x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58
x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c
x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7
x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001
x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078
Call trace:
panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
op_remap_cb.isra.22+0x50/0x80
__drm_gpuvm_sm_unmap+0x10c/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xb4/0x3d0 [panthor]
panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor]
panthor_ioctl_vm_bind+0x160/0x4a0 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x240/0x500
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251017102922.670084-1-akash.goel@arm.com
|
|
Updating drm-misc-fixes to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Updating drm-misc-next to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The regulator is optional, skip the setup instead of returning an
error if it is not present
Signed-off-by: Rain Yang <jiyu.yang@nxp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250928090334.35389-2-jiyu.yang@oss.nxp.com
|
|
Currently the Panthor driver needs the GPU to be powered down
between suspend and resume. If this is not done, then the
MCU_CONTROL register will be preserved as AUTO, which again will
cause a premature FW boot on resume. The FW will go directly into
fatal state in this case.
This case needs to be handled as there is no guarantee that the
GPU will be powered down after the suspend callback on all platforms.
The fix is to call panthor_fw_stop() in "pre-reset" path to ensure
the MCU_CONTROL register is cleared (set DISABLE). This matches
well with the already existing call to panthor_fw_start() from the
"post-reset" path.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251008105112.4077015-1-ketil.johnsen@arm.com
|
|
Add panthor_soc_data to control custom ASN_HASH. Add compatible string
for "mediatek,mt8196-mali" and enable custom ASN_HASH for the soc.
Without custom ASN_HASH, FW fails to boot
panthor 48000000.gpu: [drm] *ERROR* Unhandled Page fault in AS0 at VA 0x0000000000000000
panthor 48000000.gpu: [drm] *ERROR* Failed to boot MCU (status=fatal)
panthor 48000000.gpu: probe with driver panthor failed with error -110
With custom ASN_HASH, panthor probes fine and userspace boots to ui just
fine as well
panthor 48000000.gpu: [drm] clock rate = 0
panthor 48000000.gpu: EM: created perf domain
panthor 48000000.gpu: [drm] Mali-G925-Immortalis id 0xd830 major 0x0 minor 0x1 status 0x5
panthor 48000000.gpu: [drm] Features: L2:0x8130306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
panthor 48000000.gpu: [drm] shader_present=0xee0077 l2_present=0x1 tiler_present=0x1
panthor 48000000.gpu: [drm] Firmware protected mode entry not be supported, ignoring
panthor 48000000.gpu: [drm] Firmware git sha: 27713280172c742d467a4b7d11180930094092ec
panthor 48000000.gpu: [drm] CSF FW using interface v3.13.0, Features 0x10 Instrumentation features 0x71
[drm] Initialized panthor 1.5.0 for 48000000.gpu on minor 1
Note that the clock and the regulator drivers are not upstreamed yet.
They might as well take a different form when upstreamed.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250913002155.1163908-3-olvaffe@gmail.com
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Commit de8548813824 ("drm/panthor: Add the scheduler logical block")
handled destruction of a group's queues' drm scheduler entities early
into the group destruction procedure.
However, that races with the group submit ioctl, because by the time
entities are destroyed (through the group destroy ioctl), the submission
procedure might've already obtained a group handle, and therefore the
ability to push jobs into entities. This is met with a DRM error message
within the drm scheduler core as a situation that should never occur.
Fix by deferring drm scheduler entity destruction to queue release time.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250919164436.531930-1-adrian.larumbe@collabora.com
|
|
It is unclear why fence errors were set only for CS_INHERIT_FAULT.
Downstream driver also does not treat CS_INHERIT_FAULT specially.
Remove the check.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250828200419.3533393-1-olvaffe@gmail.com
|
|
Backmerging to drm-misc-next to get fixes from v6.17-rc6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Userspace relies on the ring field of gpu_scheduler tracepoints to
identify a drm_gpu_scheduler. The value of the ring field is taken from
sched->name.
Because we typically have multiple schedulers running in parallel in
each process, assign unique names to schedulers such that userspace can
distinguish them.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250902200624.428175-1-olvaffe@gmail.com
|
|
A panthor group can have at most MAX_CS_PER_CSG panthor queues.
Fixes: 4bdca11507928 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # v1
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250903192133.288477-1-olvaffe@gmail.com
|
|
Fail early from panthor_vm_bind_prepare_op_ctx instead of late from
ops->map_pages.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250828200116.3532255-1-olvaffe@gmail.com
|
|
The only callers to mmu_hw_do_operation_locked() pass an 'op' of either
AS_COMAND_FLUSH_MEM or AS_COMMAND_FLUSH_PT. This means the code paths
after that are dead. Removing those paths means the
mmu_hw_do_flush_on_gpu_ctrl() function might has well be inlined.
Simplify everything by having a switch statement for the type of 'op'
(warning if we get an unexpected value) and removing the dead cases.
Suggested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Link: https://lore.kernel.org/r/20250815134226.57703-1-steven.price@arm.com
|
|
Since all users of gem.gpuva.lock_dep_map now rely on the mutex directly
in gpuva, we may remove it. Whether the mutex is used is now tracked by
a flag in gpuvm rather than by whether lock_dep_map is null.
Note that a GEM object may not be pushed to multiple gpuvms that
disagree on the value of this new flag. But that's okay because a single
driver should use the same locking scheme everywhere, and a GEM object
is driver specific (when a GEM is exported with prime, a new GEM object
instance is created from the backing dma-buf).
The flag is present even with CONFIG_LOCKDEP=n because the intent is
that the flag will also cause vm_bo cleanup to become deferred. However,
that will happen in a follow-up patch.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-3-bd89f5a82c0d@google.com
[ Use lockdep_is_held() instead of lock_is_held(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Now that drm_gem_object has a dedicated mutex for the gpuva list that is
intended to be used in cases that must be fence signalling safe, use it
in Panthor.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-2-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We are about to pass more arguments to drm_gpuvm_sm_map[_ops_create](),
so, before we do that, let's pass arguments through a struct instead
of changing each call site every time a new optional argument is added.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Brendan King <Brendan.King@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Caterina Shablia <caterina.shablia@collabora.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com> # imagination/pvr_vm.c
Acked-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-2-himal.prasad.ghimiray@intel.com
|
|
This patch adds firmware binary and GPU model naming support for
Mali-Gx20 and Mali-Gx25 GPUs.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-8-karunika.choo@arm.com
|
