| Age | Commit message (Collapse) | Author |
|---|
|
Fwlog code needs to communicate with FW. In ice it is done through admin
queue command. Allow indirect calling the send function to move the
specific admin queue send function from fwlog core code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Prepare the code to be moved to the library. ice_debug() won't be there
so switch to dev_dbg().
Add struct pdev pointer in fwlog to track on which pdev the fwlog was
created.
Switch the dev passed in dev_warn() to the one stored in fwlog.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The new structure is needed to make the fwlog code a library. A goal is
to drop ice_hw structure in all fwlog related functions calls.
Pass a ice_fwlog pointer across fwlog functions and use it wherever it
is possible.
Still use &hw->fwlog in debugfs code as it needs changing the value
being passed in priv. It will be done in one of the next patches.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Any other access to fwlog_cfg isn't done through a function. Follow
scheme that is used to access other fwlog_cfg elements from debugfs and
write to the log_level directly.
ice_pf_fwlog_update_module() is called only twice (from one function).
Remove it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change the function prototype to receive hw structure instead of pf to
simplify the call. Instead of passing whole event pass only msg_buf
pointer and length.
Make ice_fwlog_ring_full() static as it isn't called from any other
context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_fwlog_supported(), ice_fwlog_get() and ice_fwlog_supported() aren't
called outside the ice_fwlog.c file. Make it static and move in the file
to allow clean build.
Drop ice_fwlog_get(). It is called only from ice_fwlog_init() function
where the fwlog support is already checked. There is no need to check it
again, call ice_aq_fwlog_get() instead.
Drop no longer valid comment from ice_fwlog_get_supported().
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
xdp_update_skb_shared_info() needs to update skb state which
was maintained in xdp_buff / frame. Pass full flags into it,
instead of breaking it out bit by bit. We will need to add
a bit for unreadable frags (even tho XDP doesn't support
those the driver paths may be common), at which point almost
all call sites would become:
xdp_update_skb_shared_info(skb, num_frags,
sinfo->xdp_frags_size,
MY_PAGE_SIZE * num_frags,
xdp_buff_is_frag_pfmemalloc(xdp),
xdp_buff_is_frag_unreadable(xdp));
Keep a helper for accessing the flags, in case we need to
transform them somehow in the future (e.g. to cover up xdp_buff
vs xdp_frame differences).
While we are touching call callers - rename the helper to
xdp_update_skb_frags_info(), previous name may have implied that
it's shinfo that's updated. We are updating flags in struct sk_buff
based on frags that got attched.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent versions of the E810 firmware have support for an extra interrupt to
handle report of the "low latency" Tx timestamps coming from the
specialized low latency firmware interface. Instead of polling the
registers, software can wait until the low latency interrupt is fired.
This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as
it uses the same "ready" bitmap to track which Tx timestamps complete.
Unfortunately, the ice_ll_ts_intr() function does not check if the
tracker is initialized before its first access. This results in NULL
dereference or use-after-free bugs similar to the issues fixed in the
ice_ptp_ts_irq() function.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: 82e71b226e0e ("ice: Enable SW interrupt from FW for LL TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The E810 device has support for a "low latency" firmware interface to
access and read the Tx timestamps. This interface does not use the standard
Tx timestamp logic, due to the latency overhead of proxying sideband
command requests over the firmware AdminQ.
The logic still makes use of the Tx timestamp tracking structure,
ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx
timestamps complete.
Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker
is initialized before its first access. This results in NULL dereference or
use-after-free bugs similar to the following:
[245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000
[245977.278774] RIP: 0010:_find_first_bit+0x19/0x40
[245977.278796] Call Trace:
[245977.278809] ? ice_misc_intr+0x364/0x380 [ice]
This can occur if a Tx timestamp interrupt races with the driver reset
logic.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: f9472aaabd1f ("ice: Process TSYN IRQ in a separate function")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26fb ("idpf: do not linearize big TSO packets")
6c4e68480238 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: split ice_virtchnl.c git-blame friendly way
Przemek Kitszel says:
Split ice_virtchnl.c into two more files (+headers), in a way
that git-blame works better.
Then move virtchnl files into a new subdir.
No logic changes.
I have developed (or discovered ;)) how to split a file in a way that
both old and new are nice in terms of git-blame
There was not much discussion on [RFC], so I would like to propose
to go forward with this approach.
There are more commits needed to have it nice, so it forms a git-log vs
git-blame tradeoff, but (after the brief moment that this is on the top)
we spend orders of magnitude more time looking at the blame output (and
commit messages linked from that) - so I find it much better to see
actual logic changes instead of "move xx to yy" stuff (typical for
"squashed/single-commit splits").
Cherry-picks/rebases work the same with this method as with simple
"squashed/single-commit" approach (literally all commits squashed into
one (to have better git-log, but shitty git-blame output).
Rationale for the split itself is, as usual, "file is big and we want to
extend it".
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: finish virtchnl.c split into rss.c
ice: extract virt/rss.c: cleanup - p2
ice: extract virt/rss.c: cleanup - p1
ice: split RSS stuff out of virtchnl.c - copy back
ice: split RSS stuff out of virtchnl.c - tmp rename
ice: finish virtchnl.c split into queues.c
ice: extract virt/queues.c: cleanup - p3
ice: extract virt/queues.c: cleanup - p2
ice: extract virt/queues.c: cleanup - p1
ice: split queue stuff out of virtchnl.c - copy back
ice: split queue stuff out of virtchnl.c - tmp rename
ice: add virt/ and move ice_virtchnl* files there
====================
Link: https://patch.msgid.link/20250827224641.415806-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move functions out of virt/virtchnl.c to virt/rss.c.
Same "git tricks" used as for the split into virt/queues.c
that is immediately preceding this split.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove remaining portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Start removing stuff from virt/rss.c that will be kept in the main
virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/rss.c have the same content,
and only the former of the two in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Temporary rename of virtchnl.c into rss.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move queue configuration functions out of virtchnl.c to queues.c.
Technically the move was started by an earlier commit of the series,
that was duplicating virtchnl.c as queues.c (what forces git to nicely
show blame when asked), followed by a couple of cleanup commits (that
removed stuff that is not moved from the new file, again - multiple
commits, to avoid git saving on changes lines by reusing removed lines
as a content of some kept function), with this final commit actually
enabling compilation of the new file, removing stuff from the virtchnl.c,
and making some moved functions visible (via static keyword removal).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove final portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove next piece of the content that stays in virtchnl.c,
(separate commits to have nicer git history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Start removing stuff from virt/queues.c that will be kept in the
main virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/queues.c have the same content,
and only the former of the two is in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Temporary rename of virtchnl.c into queues.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move the default graceful period from a parameter to
devlink_health_reporter_create() to a field in the
devlink_health_reporter_ops structure.
This change improves consistency, as the graceful period is inherently
tied to the reporter's behavior and recovery policy. It simplifies the
signature of devlink_health_reporter_create() and its internal helper
functions. It also centralizes the reporter configuration at the ops
structure, preparing the groundwork for a downstream patch that will
introduce a devlink health reporter burst period attribute whose
default value will similarly be provided by the driver via the ops
structure.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver increments `alloc_page_failed` when buffer allocation fails
in `ice_clean_rx_irq()`. However, this counter is intended for page allocation
failures, not buffer allocation issues.
This patch corrects the counter by incrementing `alloc_buf_failed` instead,
ensuring accurate statistics reporting for buffer allocation failures.
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_adapter structure is used by the ice driver to connect multiple
physical functions of a device in software. It was introduced by
commit 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on
the same NIC") and is primarily used for PTP support, as well as for
handling certain cross-PF synchronization.
The original design of ice_adapter used PCI address information to
determine which devices should be connected. This was extended to support
E825C devices by commit fdb7f54700b1 ("ice: Initial support for E825C
hardware in ice_adapter"), which used the device ID for E825C devices
instead of the PCI address.
Later, commit 0093cb194a75 ("ice: use DSN instead of PCI BDF for
ice_adapter index") replaced the use of Bus/Device/Function addressing with
use of the device serial number.
E825C devices may appear in "Dual NAC" configuration which has multiple
physical devices tied to the same clock source and which need to use the
same ice_adapter. Unfortunately, each "NAC" has its own NVM which has its
own unique Device Serial Number. Thus, use of the DSN for connecting
ice_adapter does not work properly. It "worked" in the pre-production
systems because the DSN was not initialized on the test NVMs and all the
NACs had the same zero'd serial number.
Since we cannot rely on the DSN, lets fall back to the logic in the
original E825C support which used the device ID. This is safe for E825C
only because of the embedded nature of the device. It isn't a discreet
adapter that can be plugged into an arbitrary system. All E825C devices on
a given system are connected to the same clock source and need to be
configured through the same PTP clock.
To make this separation clear, reserve bit 63 of the 64-bit index values as
a "fixed index" indicator. Always clear this bit when using the device
serial number as an index.
For E825C, use a fixed value defined as the 0x579C E825C backplane device
ID bitwise ORed with the fixed index indicator. This is slightly different
than the original logic of just using the device ID directly. Doing so
prevents a potential issue with systems where only one of the NACs is
connected with an external PHY over SGMII. In that case, one NAC would
have the E825C_SGMII device ID, but the other would not.
Separate the determination of the full 64-bit index from the 32-bit
reduction logic. Provide both ice_adapter_index() and a wrapping
ice_adapter_xa_index() which handles reducing the index to a long on 32-bit
systems. As before, cache the full index value in the adapter structure to
warn about collisions.
This fixes issues with E825C not initializing PTP on both NACs, due to
failure to connect the appropriate devices to the same ice_adapter.
Fixes: 0093cb194a75 ("ice: use DSN instead of PCI BDF for ice_adapter index")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_cfg_tx_topo function attempts to apply Tx scheduler topology
configuration based on NVM parameters, selecting either a 5 or 9 layer
topology.
As part of this flow, the driver acquires the "Global Configuration Lock",
which is a hardware resource associated with programming the DDP package
to the device. This "lock" is implemented by firmware as a way to
guarantee that only one PF can program the DDP for a device. Unlike a
traditional lock, once a PF has acquired this lock, no other PF will be
able to acquire it again (including that PF) until a CORER of the device.
Future requests to acquire the lock report that global configuration has
already completed.
The following flow is used to program the Tx topology:
* Read the DDP package for scheduler configuration data
* Acquire the global configuration lock
* Program Tx scheduler topology according to DDP package data
* Trigger a CORER which clears the global configuration lock
This is followed by the flow for programming the DDP package:
* Acquire the global configuration lock (again)
* Download the DDP package to the device
* Release the global configuration lock.
However, if configuration of the Tx topology fails, (i.e.
ice_get_set_tx_topo returns an error code), the driver exits
ice_cfg_tx_topo() immediately, and fails to trigger CORER.
While the global configuration lock is held, the firmware rejects most
AdminQ commands, as it is waiting for the DDP package download (or Tx
scheduler topology programming) to occur.
The current driver flows assume that the global configuration lock has been
reset by CORER after programming the Tx topology. Thus, the same PF
attempts to acquire the global lock again, and fails. This results in the
driver reporting "an unknown error occurred when loading the DDP package".
It then attempts to enter safe mode, but ultimately fails to finish
ice_probe() since nearly all AdminQ command report error codes, and the
driver stops loading the device at some point during its initialization.
The only currently known way that ice_get_set_tx_topo() can fail is with
certain older DDP packages which contain invalid topology configuration, on
firmware versions which strictly validate this data. The most recent
releases of the DDP have resolved the invalid data. However, it is still
poor practice to essentially brick the device, and prevent access to the
device even through safe mode or recovery mode. It is also plausible that
this command could fail for some other reason in the future.
We cannot simply release the global lock after a failed call to
ice_get_set_tx_topo(). Releasing the lock indicates to firmware that global
configuration (downloading of the DDP) has completed. Future attempts by
this or other PFs to load the DDP will fail with a report that the DDP
package has already been downloaded. Then, PFs will enter safe mode as they
realize that the package on the device does not meet the minimum version
requirement to load. The reported error messages are confusing, as they
indicate the version of the default "safe mode" package in the NVM, rather
than the version of the file loaded from /lib/firmware.
Instead, we need to trigger CORER to clear global configuration. This is
the lowest level of hardware reset which clears the global configuration
lock and related state. It also clears any already downloaded DDP.
Crucially, it does *not* clear the Tx scheduler topology configuration.
Refactor ice_cfg_tx_topo() to always trigger a CORER after acquiring the
global lock, regardless of success or failure of the topology
configuration.
We need to re-initialize the HW structure when we trigger the CORER. Thus,
it makes sense for this to be the responsibility of ice_cfg_tx_topo()
rather than its caller, ice_init_tx_topology(). This avoids needless
re-initialization in cases where we don't attempt to update the Tx
scheduler topology, such as if it has already been programmed.
There is one catch: failure to re-initialize the HW struct should stop
ice_probe(). If this function fails, we won't have a valid HW structure and
cannot ensure the device is functioning properly. To handle this, ensure
ice_cfg_tx_topo() returns a limited set of error codes. Set aside one
specifically, -ENODEV, to indicate that the ice_init_tx_topology() should
fail and stop probe.
Other error codes indicate failure to apply the Tx scheduler topology. This
is treated as a non-fatal error, with an informational message informing
the system administrator that the updated Tx topology did not apply. This
allows the device to load and function with the default Tx scheduler
topology, rather than failing to load entirely.
Note that this use of CORER will not result in loops with future PFs
attempting to also load the invalid Tx topology configuration. The first PF
will acquire the global configuration lock as part of programming the DDP.
Each PF after this will attempt to acquire the global lock as part of
programming the Tx topology, and will fail with the indication from
firmware that global configuration is already complete. Tx scheduler
topology configuration is only performed during driver init (probe or
devlink reload) and not during cleanup for a CORER that happens after probe
completes.
Fixes: 91427e6d9030 ("ice: Support 5 layer topology")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Issuing a reset when the driver is loaded without RDMA support, will
results in a crash as it attempts to remove RDMA's non-existent auxbus
device:
echo 1 > /sys/class/net/<if>/device/reset
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice]
...
Call Trace:
<TASK>
ice_prepare_for_reset+0x77/0x260 [ice]
pci_dev_save_and_disable+0x2c/0x70
pci_reset_function+0x88/0x130
reset_store+0x5a/0xa0
kernfs_fop_write_iter+0x15e/0x210
vfs_write+0x273/0x520
ksys_write+0x6b/0xe0
do_syscall_64+0x79/0x3b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but
pf->cdev_info will also be NULL, leading to the deref in the trace above.
Introduce a flag to be set when the creation of the auxbus device is
successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().
Fixes: c24a65b6a27c7 ("iidc/ice/irdma: Update IDC to support multiple consumers")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce virt/ directory to collect virtchnl files.
We are going to implement a few sizable extensions soon, each of them
increasing virt/ size, so it looks sensible to introduce a new dir.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch implements the software flows to handle SRIOV VF
communication across an Active/Active link aggregate. The same
restrictions apply as are in place for the support of Active/Backup
bonds.
- the two interfaces must be on the same NIC
- the FW LLDP engine needs to be disabled
- the DDP package that supports VF LAG must be loaded on device
- the two interfaces must have the same QoS config
- only the first interface added to the bond will have VF support
- the interface with VFs must be in switchdev mode
With the additional requirement of
- the version of the FW on the NIC needs to have VF Active/Active support
This requirement is indicated in the capabilities struct associated
with the NVM loaded on the NIC.
The balancing of traffic between the two interfaces is done on a queue
basis. Taking the queues allocated to all of the VFs as a whole, one
half of them will be distributed to each interface. When a link goes
down, then the queues allocated to the down interface will migrate to
the active port. When the down port comes back up, then the same
queues as were originally assigned there will be moved back.
Co-developed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation for implementing SRIOV Active-Active LAG support,
cleanup several unneeded variable initializations in declaration
blocks.
Also move a couple of variable initializations into declaration
block that should be there.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the SRIOV LAG Active-Active, the functions ice_lag_cfg_pf_fltr's
and ice_lag_config_eswitch's content are moved to earlier locations
in the source file. Also, ice_lag_cfg_pf_fltr is renamed, and its
flow is changed.
To reduce the delta in the larger patch, move the original functions
to their new location so that only functional changes are needed in
the larger patch.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A define in the LAG code is missing a driver specific prefix.
Add a prefix to the define.
Also shorten a defines name and move to a more logical place.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation for the new LAG functionality implementation, there are
a couple of existing LAG elements of the capabilities struct that should
be bool instead of u8. Since we are adding a new element to this struct
that should also be a bool, fix the existing LAG u8 in this patch and
eliminate !! operators where possible.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This series will be touching on the LAG code in the ice driver,
to prevent moving or propagating casting on void pointers, clean
them up first.
This also allows for moving the variable initialization into the
variable declaration.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-1-2e2fdc7d3f2c@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simple:
s/ice_aq_str/libie_aq_str
Add libie_aminq module in ice Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow
clean build.
Get version descriptor is a little less detailed on i40e. To not mess up
with shifting or union inside libie desc use get version descriptor from
i40e.
Move additional caps for i40e to libie.
Fix RCT in declaration that is using libie_aq_desc;
Use libie_aq_raw() wherever it can be used.
The libie aq error is extended, cover it in ice driver just to clean
build. In next patches the libie code for that will be used in each
of intel driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the VF handling code, parts of the code for lag can be broken out into
helper functions to reduce code duplication. Break this code out into
helper functions
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously the ice_add_prof() took an array of u8 and looped over it with
for_each_set_bit(), examining each 8 bit value as a bitmap.
This was just hard to understand and unnecessary, and was triggering
undefined behavior sanitizers with unaligned accesses within bitmap
fields (on our internal tools/builds). Since the @ptype being passed in
was already declared as a bitmap, refactor this to use native types with
the advantage of simplifying the code to use a single loop.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
CC: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E835 is an enhanced version of the E830.
It continues to use the same set of commands, registers and interfaces
as other devices in the 800 Series.
Following device IDs are added:
- 0x1248: Intel(R) Ethernet Controller E835-CC for backplane
- 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP
- 0x124A: Intel(R) Ethernet Controller E835-CC for SFP
- 0x1261: Intel(R) Ethernet Controller E835-C for backplane
- 0x1262: Intel(R) Ethernet Controller E835-C for QSFP
- 0x1263: Intel(R) Ethernet Controller E835-C for SFP
- 0x1265: Intel(R) Ethernet Controller E835-L for backplane
- 0x1266: Intel(R) Ethernet Controller E835-L for QSFP
- 0x1267: Intel(R) Ethernet Controller E835-L for SFP
Reviewed-by: Konrad Knitter <konrad.knitter@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code
to process this new option in both the devlink and the Admin Queue Command
GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like
ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on.
This feature allows the driver to correctly report configuration options
for 2x40G on E823 and other cards in the future via devlink.
Example command:
devlink port split pci/0000:01:00.0/0 count 2
Example dmesg:
ice 0000:01:00.0: Available port split options and max port speeds (Gbps):
ice 0000:01:00.0: Status Split Quad 0 Quad 1
ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7
ice 0000:01:00.0: 2 40 - - - 40 - - -
ice 0000:01:00.0: 2 50 - 50 - - - - -
ice 0000:01:00.0: 4 25 25 25 25 - - - -
ice 0000:01:00.0: 4 25 25 - - 25 25 - -
ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10
ice 0000:01:00.0: 1 100 - - - - - - -
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pf->ice_debugfs_pf_fwlog should be checked for an error here.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
