summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
AgeCommit message (Collapse)Author
4 daysMerge tag 'pci-v6.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan Williams) - Switch vmd from custom domain number allocator to the common allocator to prevent a potential race with new non-VMD buses (Dan Williams) - Enable Precision Time Measurement (PTM) only if device advertises support for a relevant role, to prevent invalid PTM Requests that cause ACS violations that are reported as AER Uncorrectable Non-Fatal errors (Mika Westerberg) Resource management: - Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen) - Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen) - Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu drivers so the PCI core can restore BARs if the resize fails (Ilpo Järvinen) - Move Resizable BAR code to rebar.c (Ilpo Järvinen) - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen) - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen) Power management and error handling: - For drivers using PCI legacy suspend, save config state at suspend so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - For devices with no driver or a driver that lacks power management, save config state at hibernate so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - Save device config space on device addition, before driver binding, so error recovery works more reliably (Lukas Wunner) - Drop pci_save_state() from several drivers that no longer need it since the PCI core always does it and pci_restore_state() no longer invalidates the saved state (Lukas Wunner) - Document use of pci_save_state() by drivers to capture the state they want restored during error recovery (Lukas Wunner) Power control: - Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) Endpoint framework: - Convert the endpoint doorbell test to use a threaded IRQ to fix a 'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri) - Add endpoint VNTB MSI doorbell support to reduce latency between host and endpoint (Frank Li) New native PCIe controller drivers: - Add CIX Sky1 host controller DT binding and driver (Hans Zhang) - Add NXP S32G host controller DT binding and driver (Vincent Guittot) - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) - Add SpacemiT K1 host controller DT binding and driver (Alex Elder) Amlogic Meson PCIe controller driver: - Update DT binding to name DBI region 'dbi', not 'elbi', and update driver to support both (Manivannan Sadhasivam) Apple PCIe controller driver: - Move struct pci_host_bridge allocation from pci_host_common_init() to callers, which significantly simplifies pcie-apple (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable advertising ASPM L0s support correctly (Jim Quinlan) - Add a panic/die handler to print diagnostic info in case PCIe caused an unrecoverable abort (Jim Quinlan) Cadence PCIe controller driver: - Add module support for Cadence platform host and endpoint controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare for new CIX Sky1 driver (Manikandan K Pillai) MediaTek PCIe controller driver: - Convert DT binding to YAML schema (Christian Marangi) - Add Airoha AN7583 DT compatible and driver support (Christian Marangi) Qualcomm PCIe controller driver: - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu) - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280, sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas (Krzysztof Kozlowski) - Look up OPP using both frequency and data rate (not just frequency) so RPMh votes can account for both (Krishna Chaitanya Chundru) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi) STMicroelectronics STM32MP25 PCIe controller driver: - Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Clear L1 PM Substate Capability 'Supported' bits unless glue driver says it's supported, which prevents users from enabling non-working L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas) - Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas) - Configure L1SS support in dw-rockchip when DT says 'supports-clkreq' (Shawn Lin) TI Keystone PCIe controller driver: - Fail the probe instead of silently succeeding if ks_pcie_of_data didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli) - Make keystone buildable as a loadable module, except on ARM32 where hook_fault_code() is __init (Siddharth Vadapalli)" * tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits) MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller PCI: Add Renesas RZ/G3S host controller driver PCI: host-generic: Move bridge allocation outside of pci_host_common_init() dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding PCI: Validate pci_rebar_size_supported() input Documentation: PCI: Amend error recovery doc with pci_save_state() rules treewide: Drop pci_save_state() after pci_restore_state() PCI/ERR: Ensure error recoverability at all times PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths PCI: dw-rockchip: Configure L1SS support PCI: tegra194: Remove unnecessary L1SS disable code ...
11 daysixgbe: avoid redundant call to ixgbe_non_sfp_link_config()Alok Tiwari
ixgbe_non_sfp_link_config() is called twice in ixgbe_open() once to assign its return value to err and again in the conditional check. This patch uses the stored err value instead of calling the function a second time. This avoids redundant work and ensures consistent error reporting. Also fix a small typo in the ixgbe_remove() comment: "The could be caused" -> "This could be caused". Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20251125223632.1857532-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-24treewide: Drop pci_save_state() after pci_restore_state()Lukas Wunner
In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
2025-10-28ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()Kohei Enju
The error path of ixgbe_recovery_probe() has two memory bugs. For non-E610 adapters, the function jumps to clean_up_probe without calling devlink_free(), leaking the devlink instance and its embedded adapter structure. For E610 adapters, devlink_free() is called at shutdown_aci, but clean_up_probe then accesses adapter->state, sometimes triggering use-after-free because adapter is embedded in devlink. This UAF is similar to the one recently reported in ixgbe_remove(). (Link) Fix both issues by moving devlink_free() after adapter->state access, aligning with the cleanup order in ixgbe_probe(). Link: https://lore.kernel.org/intel-wired-lan/20250828020558.1450422-1-den@valinux.co.jp/ Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-10-13ixgbe: fix too early devlink_free() in ixgbe_remove()Koichiro Den
Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Fixes: a0285236ab93 ("ixgbe: add initial devlink support") Signed-off-by: Koichiro Den <den@valinux.co.jp> Tested-by: Rinitha S <sx.rinitha@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-6-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc7). No conflicts. Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en/fs.h 9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX") 7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-16ixgbe: destroy aci.lock later within ixgbe_remove pathJedrzej Jagielski
There's another issue with aci.lock and previous patch uncovers it. aci.lock is being destroyed during removing ixgbe while some of the ixgbe closing routines are still ongoing. These routines use Admin Command Interface which require taking aci.lock which has been already destroyed what leads to call trace. [ +0.000004] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ +0.000007] WARNING: CPU: 12 PID: 10277 at kernel/locking/mutex.c:155 mutex_lock+0x5f/0x70 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000006] ixgbe_aci_send_cmd+0xc8/0x220 [ixgbe] [ +0.000049] ? try_to_wake_up+0x29d/0x5d0 [ +0.000009] ixgbe_disable_rx_e610+0xc4/0x110 [ixgbe] [ +0.000032] ixgbe_disable_rx+0x3d/0x200 [ixgbe] [ +0.000027] ixgbe_down+0x102/0x3b0 [ixgbe] [ +0.000031] ixgbe_close_suspend+0x28/0x90 [ixgbe] [ +0.000028] ixgbe_close+0xfb/0x100 [ixgbe] [ +0.000025] __dev_close_many+0xae/0x220 [ +0.000005] dev_close_many+0xc2/0x1a0 [ +0.000004] ? kernfs_should_drain_open_files+0x2a/0x40 [ +0.000005] unregister_netdevice_many_notify+0x204/0xb00 [ +0.000006] ? __kernfs_remove.part.0+0x109/0x210 [ +0.000006] ? kobj_kset_leave+0x4b/0x70 [ +0.000008] unregister_netdevice_queue+0xf6/0x130 [ +0.000006] unregister_netdev+0x1c/0x40 [ +0.000005] ixgbe_remove+0x216/0x290 [ixgbe] [ +0.000021] pci_device_remove+0x42/0xb0 [ +0.000007] device_release_driver_internal+0x19c/0x200 [ +0.000008] driver_detach+0x48/0x90 [ +0.000003] bus_remove_driver+0x6d/0xf0 [ +0.000006] pci_unregister_driver+0x2e/0xb0 [ +0.000005] ixgbe_exit_module+0x1c/0xc80 [ixgbe] Same as for the previous commit, the issue has been highlighted by the commit 337369f8ce9e ("locking/mutex: Add MUTEX_WARN_ON() into fast path"). Move destroying aci.lock to the end of ixgbe_remove(), as this simply fixes the issue. Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-16ixgbe: initialize aci.lock before it's usedJedrzej Jagielski
Currently aci.lock is initialized too late. A bunch of ACI callbacks using the lock are called prior it's initialized. Commit 337369f8ce9e ("locking/mutex: Add MUTEX_WARN_ON() into fast path") highlights that issue what results in call trace. [ 4.092899] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 4.092910] WARNING: CPU: 0 PID: 578 at kernel/locking/mutex.c:154 mutex_lock+0x6d/0x80 [ 4.098757] Call Trace: [ 4.098847] <TASK> [ 4.098922] ixgbe_aci_send_cmd+0x8c/0x1e0 [ixgbe] [ 4.099108] ? hrtimer_try_to_cancel+0x18/0x110 [ 4.099277] ixgbe_aci_get_fw_ver+0x52/0xa0 [ixgbe] [ 4.099460] ixgbe_check_fw_error+0x1fc/0x2f0 [ixgbe] [ 4.099650] ? usleep_range_state+0x69/0xd0 [ 4.099811] ? usleep_range_state+0x8c/0xd0 [ 4.099964] ixgbe_probe+0x3b0/0x12d0 [ixgbe] [ 4.100132] local_pci_probe+0x43/0xa0 [ 4.100267] work_for_cpu_fn+0x13/0x20 [ 4.101647] </TASK> Move aci.lock mutex initialization to ixgbe_sw_init() before any ACI command is sent. Along with that move also related SWFW semaphore in order to reduce size of ixgbe_probe() and that way all locks are initialized in ixgbe_sw_init(). Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-11ixgbe: fwlog support for e610Michal Swiatkowski
The device support firmware logging feature. Use libie code to initialize it and allow reading the logs using debugfs. The commands are the same as in ice driver. Look at the description in commit 96a9a9341cda ("ice: configure FW logging") for more info. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-08-20ixgbe: fix ndo_xdp_xmit() workloadsMaciej Fijalkowski
Currently ixgbe driver checks periodically in its watchdog subtask if there is anything to be transmitted (considering both Tx and XDP rings) under state of carrier not being 'ok'. Such event is interpreted as Tx hang and therefore results in interface reset. This is currently problematic for ndo_xdp_xmit() as it is allowed to produce descriptors when interface is going through reset or its carrier is turned off. Furthermore, XDP rings should not really be objects of Tx hang detection. This mechanism is rather a matter of ndo_tx_timeout() being called from dev_watchdog against Tx rings exposed to networking stack. Taking into account issues described above, let us have a two fold fix - do not respect XDP rings in local ixgbe watchdog and do not produce Tx descriptors in ndo_xdp_xmit callback when there is some problem with carrier currently. For now, keep the Tx hang checks in clean Tx irq routine, but adjust it to not execute for XDP rings. Cc: Tobias Böhm <tobias.boehm@hetzner-cloud.de> Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Closes: https://lore.kernel.org/netdev/eca1880f-253a-4955-afe6-732d7c6926ee@hetzner-cloud.de/ Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect") Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250819222000.3504873-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-03ixgbe: spelling correctionsSimon Horman
Correct spelling as flagged by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-03ixgbe: turn off MDD while modifying SRRCTLRadoslaw Tyl
Modifying SRRCTL register can generate MDD event. Turn MDD off during SRRCTL register write to prevent generating MDD. Fix RCT in ixgbe_set_rx_drop_en(). Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-03ixgbe: add Tx hang detection unhandled MDDSlawomir Mrozowicz
Add Tx Hang detection due to an unhandled MDD Event. Previously, a malicious VF could disable the entire port causing TX to hang on the E610 card. Those events that caused PF to freeze were not detected as an MDD event and usually required a Tx Hang watchdog timer to catch the suspension, and perform a physical function reset. Implement flows in the affected PF driver in such a way to check the cause of the hang, detect it as an MDD event and log an entry of the malicious VF that caused the Hang. The PF blocks the malicious VF, if it continues to be the source of several MDD events. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-03ixgbe: check for MDD eventsDon Skidmore
When an event is detected it is logged and, for the time being, the queue is immediately re-enabled. This is due to the lack of an API to the hypervisor so it could deal with it as it chooses. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-03ixgbe: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean
New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert the Intel ixgbe driver to the new API, so that timestamping configuration can be removed from the ndo_eth_ioctl() path completely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Milena Olech <milena.olech@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09ixgbe: add link_down_events statisticMartyna Szapar-Mudlaw
Introduce a link_down_events counter to the ixgbe driver, incremented each time the link transitions from up to down. This counter can help diagnose issues related to link stability, such as port flapping or unexpected link drops. The value is exposed via ethtool's get_link_ext_stats() interface. Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-29ixgbe: devlink: add devlink region support for E610Slawomir Mrozowicz
Provide support for the following devlink cmds: -DEVLINK_CMD_REGION_GET -DEVLINK_CMD_REGION_NEW -DEVLINK_CMD_REGION_DEL -DEVLINK_CMD_REGION_READ ixgbe devlink region implementation, similarly to the ice one, lets user to create snapshots of content of Non Volatile Memory, content of Shadow RAM, and capabilities of the device. For both NVM and SRAM regions provide .read() handler to let user read their contents without the need to create full snapshots. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-29ixgbe: create E610 specific ethtool_ops structureJedrzej Jagielski
E610's implementation of various ethtool ops is different than the ones corresponding to ixgbe legacy products. Therefore create separate E610 ethtool_ops struct which will be filled out in the forthcoming patches. Add adequate ops struct basing on MAC type. This step requires changing a bit the flow of probing by placing ixgbe_set_ethtool_ops after hw.mac.type is assigned. So move the whole netdev assignment block after hw.mac.type is known. This step doesn't have any additional impact on probing sequence. Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add support for FW rollback modeAndrii Staikov
The driver should detect whether the device entered FW rollback mode and then notify user with the dedicated message including FW and NVM versions. Even if the driver detected rollback mode, this should not result in an probe error and the normal flow proceeds. FW tries to rollback to "old" operational FW located in the inactive NVM bank in cases when newly loaded FW exhibits faulty behavior. If something goes wrong during boot the FW may switch into rollback mode in an attempt to avoid recovery mode and stay operational. After rollback is successful, the banks are swapped, and the "rollback" bank becomes the active bank for the next reset. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add E610 implementation of FW recovery modeJedrzej Jagielski
Add E610 implementation of fw_recovery_mode MAC operation. In case of E610 information about recovery mode is obtained from FW_MODES field in IXGBE_GL_MNG_FWSM register (0x000B6134). Introduce recovery specific probing flow and init only vital features. User should be able to perform NVM update using devlink once FW error is detected in order to load a healthy img. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add FW API version checkJedrzej Jagielski
Add E610 specific function checking whether the FW API version is compatible with the driver expectations. The major API version should be less than or equal to the expected API version. If not the driver won't be fully operational. Check the minor version, and if it is more than two versions lesser or greater than the expected version, print a message indicating that the NVM or driver should be updated respectively. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add support for devlink reloadJedrzej Jagielski
The E610 adapters contain an embedded chip with firmware which can be updated using devlink flash. The firmware which runs on this chip is referred to as the Embedded Management Processor firmware (EMP firmware). Activating the new firmware image currently requires that the system be rebooted. This is not ideal as rebooting the system can cause unwanted downtime. The EMP firmware itself can be reloaded by issuing a special update to the device called an Embedded Management Processor reset (EMP reset). This reset causes the device to reset and reload the EMP firmware. Implement support for devlink reload with the "fw_activate" flag. This allows user space to request the firmware be activated immediately. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add E610 functions getting PBA and FW ver infoJedrzej Jagielski
Introduce 2 E610 specific callbacks implementations: -ixgbe_start_hw_e610() which expands the regular .start_hw callback with getting FW version information -ixgbe_read_pba_string_e610() which gets Product Board Assembly string Extend EEPROM ops with new .read_pba_string in order to distinguish generic one and the E610 one. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add E610 functions for acquiring flash dataSlawomir Mrozowicz
Read NVM related info from the flash. Add several helper functions used to access the flash data, find memory banks, calculate offsets, calculate the flash size. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: add initial devlink supportJedrzej Jagielski
Add an initial support for devlink interface to ixgbe driver. Similarly to i40e driver the implementation doesn't enable devlink to manage device-wide configuration. Devlink instance is created for each physical function of PCIe device. Create separate directory for devlink related ixgbe files and use naming scheme similar to the one used in the ice driver. Add a stub for Documentation, to be extended by further patches. Change struct ixgbe_adapter allocation to be done by devlink (Przemek), as suggested by Jiri. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-15ixgbe: wrap netdev_priv() usagePrzemek Kitszel
Wrap use of netdev_priv() in order to change the allocator of the device private structure from alloc_etherdev_mq() to the devlink in next commit. All but one netdev_priv() calls in the whole driver are replaced, the remaining one is called on MACVLAN (so not ixgbe) device. Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-18ixgbe: add support for thermal sensor event receptionJedrzej Jagielski
E610 NICs unlike the previous devices utilising ixgbe driver are notified in the case of overheating by the FW ACI event. In event of overheat when threshold is exceeded, FW suspends all traffic and sends overtemp event to the driver. Then driver logs appropriate message and disables the adapter instance. The card remains in that state until the platform is rebooted. This approach is a solution to the fact current version of the E610 FW doesn't support reading thermal sensor data by the SW. So give to user at least any info that overtemp event has occurred, without interface disappearing from the OS without any note. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-11ixgbe: Fix possible skb NULL pointer dereferencePiotr Kwapulinski
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status encoding. Propagate this logic to the ixgbe_put_rx_buffer(). The commit also relaxed the skb NULL pointer check - caught by Smatch. Restore this check. Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/ Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()Yue Haibing
ixgbe_run_xdp() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in ixgbe_clean_rx_irq(). Remove this error pointer handing instead use plain int return value. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20ixgbe: Enable link management in E610 devicePiotr Kwapulinski
Add high level link management support for E610 device. Enable the following features: - driver load - bring up network interface - IP address assignment - pass traffic - show statistics (e.g. via ethtool) - disable network interface - driver unload Co-developed-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Clean up the E610 link management related codePiotr Kwapulinski
Required for enabling the link management in E610 device. Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add support for E610 device capabilities detectionPiotr Kwapulinski
Add low level support for E610 device capabilities detection. The capabilities are discovered via the Admin Command Interface. Discover the following capabilities: - function caps: vmdq, dcb, rss, rx/tx qs, msix, nvm, orom, reset - device caps: vsi, fdir, 1588 - phy caps Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000) For ice: Mateusz refactors and adds additional SerDes configuration values to be output. Przemek refactors processing of DDP and adds support for a flag field in the DDP's signature segment header. Joe Damato adds support for persistent NAPI config. Brett adjusts setting of Tx promiscuous based on unicast/multicast setting. Jake moves setting of pf->supported_rxdids to occur directly after DDP load and changes a small struct to use stack memory. Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue. For ixgbe: Diomidis Spinellis removes a circular dependency. For igc: Vitaly removes an unneeded autoneg parameter. For igb: Johnny Park fixes a couple of typos. For igbvf: Wander Lairson Costa removes an unused spinlock. For e1000: Joe Damato adds RTNL lock to some calls where it is expected to be held. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: Hold RTNL when e1000_down can be called igbvf: remove unused spinlock igb: Fix 2 typos in comments in igb_main.c igc: remove autoneg parameter from igc_mac_info ixgbe: Break include dependency cycle ice: Unbind the workqueue ice: use stack variable for virtchnl_supported_rxdids ice: initialize pf->supported_rxdids immediately after loading DDP ice: only allow Tx promiscuous for multicast ice: Add support for persistent NAPI config ice: support optional flags in signature segment header ice: refactor "last" segment of DDP pkg ice: extend dump serdes equalizer values feature ice: rework of dump serdes equalizer values feature ==================== Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13ixgbe: Break include dependency cycleDiomidis Spinellis
Header ixgbe_type.h includes ixgbe_mbx.h. Also, header ixgbe_mbx.h included ixgbe_type.h, thus introducing a circular dependency. - Remove ixgbe_mbx.h inclusion from ixgbe_type.h. - ixgbe_mbx.h requires the definition of struct ixgbe_mbx_operations so move its definition there. While at it, add missing argument identifier names. - Add required forward structure declarations. - Include ixgbe_mbx.h in the .c files that need it, for the following reasons: ixgbe_sriov.c uses ixgbe_check_for_msg ixgbe_main.c uses ixgbe_init_mbx_params_pf ixgbe_82599.c uses mbx_ops_generic ixgbe_x540.c uses mbx_ops_generic ixgbe_x550.c uses mbx_ops_generic Signed-off-by: Diomidis Spinellis <dds@aueb.gr> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-03netdev_features: convert NETIF_F_FCOE_MTU to dev->fcoe_mtuAlexander Lobakin
Ability to handle maximum FCoE frames of 2158 bytes can never be changed and thus more of an attribute, not a toggleable feature. Move it from netdev_features_t to "cold" priv flags (bitfield bool) and free yet another feature bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-29 (net: intel) This series contains updates to most Intel drivers. Jesse moves declaration of pci_driver struct to remove need for forward declarations in igb and converts Intel drivers to user newer power management ops. Sasha reworks power management flow on igc to avoid using rtnl_lock() during those flows. Maciej reorganizes i40e_nvm file to avoid forward declarations. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: avoid forward declarations in i40e_nvm.c igc: Refactor runtime power management flow net: intel: implement modern PM ops declarations igb: simplify pci ops declaration ==================== Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-08Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-06 (iavf, i40e, ixgbe) This series contains updates to iavf, i40e, and ixgbe drivers. Alexey Kodanev removes duplicate calls related to cloud filters on iavf and unnecessary null checks on i40e. Maciej adds helper functions for common code relating to updating statistics for ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06ixgbe: pull out stats update to common routinesMaciej Fijalkowski
Introduce ixgbe_update_{r,t}x_ring_stats() that will be used by both standard and ZC datapath. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04intel: make module parameters readable in sys filesystemJon Maxwell
Linux users sometimes need an easy way to check current values of module parameters. For example the module may be manually reloaded with different parameters. Make these visible and readable in the /sys filesystem to allow that. But don't make the "debug" module parameter visible as debugging is enabled via ethtool msglvl. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}ableMaciej Fijalkowski
Currently routines that are supposed to toggle state of ring pair do not take care of associated interrupt with queue vector that these rings belong to. This causes funky issues such as dead interface due to irq misconfiguration, as per Pavel's report from Closes: tag. Add a function responsible for disabling single IRQ in EIMC register and call this as a very first thing when disabling ring pair during xsk_pool setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this, disable/enable NAPI as first/last thing when dealing with closing or opening ring pair that xsk_pool is being configured on. Reported-by: Pavel Vazharov <pavel@x3me.net> Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/ Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-09 04:09:57 +0000