| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nvme_fc_delete_assocation() waits for pending I/O to complete before
returning, and an error can cause ->ioerr_work to be queued after
cancel_work_sync() had been called. Move the call to cancel_work_sync() to
be after nvme_fc_delete_association() to ensure ->ioerr_work is not running
when the nvme_fc_ctrl object is freed. Otherwise the following can occur:
[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL
[ 1135.917705] ------------[ cut here ]------------
[ 1135.922336] kernel BUG at lib/list_debug.c:52!
[ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)
[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025
[ 1135.950969] Workqueue: 0x0 (nvme-wq)
[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b
[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046
[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000
[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0
[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08
[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100
[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0
[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000
[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0
[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1136.055910] PKRU: 55555554
[ 1136.058623] Call Trace:
[ 1136.061074] <TASK>
[ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.071898] ? move_linked_works+0x4a/0xa0
[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.081744] ? __die_body.cold+0x8/0x12
[ 1136.085584] ? die+0x2e/0x50
[ 1136.088469] ? do_trap+0xca/0x110
[ 1136.091789] ? do_error_trap+0x65/0x80
[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.101289] ? exc_invalid_op+0x50/0x70
[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20
[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.120806] move_linked_works+0x4a/0xa0
[ 1136.124733] worker_thread+0x216/0x3a0
[ 1136.128485] ? __pfx_worker_thread+0x10/0x10
[ 1136.132758] kthread+0xfa/0x240
[ 1136.135904] ? __pfx_kthread+0x10/0x10
[ 1136.139657] ret_from_fork+0x31/0x50
[ 1136.143236] ? __pfx_kthread+0x10/0x10
[ 1136.146988] ret_from_fork_asm+0x1a/0x30
[ 1136.150915] </TASK>
Fixes: 19fce0470f05 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context")
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Now target is removed from nvme_fc_ctrl_free() which is the ctrl->ref
release handler. And even admin queue is unquiesced there, this way
is definitely wrong because the ctr->ref is grabbed when submitting
command.
And Marco observed that nvme_fc_ctrl_free() can be called from request
completion code path, and trigger kernel warning since request completes
from softirq context.
Fix the issue by moveing target removal into nvme_fc_delete_ctrl(),
which is also aligned with nvme-tcp and nvme-rdma.
Patch originally proposed by Ming Lei, then modified to move the tagset
removal down to after nvme_fc_delete_association() after further testing.
Cc: Marco Patalano <mpatalan@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Blktests test cases nvme/014, 057 and 058 fail occasionally due to a
lockdep WARN. As reported in the Closes tag URL, the WARN indicates that
a deadlock can happen due to the dependency among disk->open_mutex,
kblockd workqueue completion and partition_scan_work completion.
To avoid the lockdep WARN and the potential deadlock, cut the dependency
by running the partition_scan_work not by kblockd workqueue but by
nvme_wq.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs8mJ+R_GmQm9R8ebResKAWUE8kF5+_WVg0v8zndmqd6BQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-block/oeyzci6ffshpukpfqgztsdeke5ost5hzsuz4rrsjfmvpqcevax@5nhnwbkzbrpa/
Fixes: 1f021341eef4 ("nvme-multipath: defer partition scanning")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 7e091add9c43 "nvme-auth: update sc_c in host response" added
the sc_c variable to the dhchap queue context structure which is
appropriately set during negotiate and then used in the host response.
This breaks secure concat connections with a Linux target as the target
code wasn't updated at the same time. This patch fixes this by adding a
new sc_c variable to the host hash calculations.
Fixes: 7e091add9c43 ("nvme-auth: update sc_c in host response")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Martin George <marting@netapp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In commit eadaa8b255f3 ("dma-mapping: introduce new DMA attribute to
indicate MMIO memory"), DMA_ATTR_MMIO attribute was added to describe
MMIO addresses, which require to avoid any memory cache flushing, as
an outcome of the discussion pointed in Link tag below.
In case of PCI_P2PDMA_MAP_THRU_HOST_BRIDGE transfer, blk-mq-dm logic
treated this as regular page and relied on "struct page" DMA flow.
That flow performs CPU cache flushing, which shouldn't be done here,
and doesn't set IOMMU_MMIO flag in DMA-IOMMU case.
As a solution, let's encode peer-to-peer transaction type in NVMe IOD
flags variable and provide it to blk-mq-dma API.
Link: https://lore.kernel.org/all/f912c446-1ae9-4390-9c11-00dce7bf0fd3@arm.com/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After introduction of dma_map_phys(), there is no need to convert
from physical address to struct page in order to map page. So let's
use it directly.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.
Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The namespaces can access the controller's admin request_queue, and
stale references on the namespaces may exist after tearing down the
controller. Ensure the admin request_queue is active by moving the
controller's 'put' to after all controller references have been released
to ensure no one is can access the request_queue. This fixes a reported
use-after-free bug:
BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0
Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287
CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
print_report+0xc4/0x620
? _raw_spin_lock_irqsave+0x70/0xb0
? _raw_read_unlock_irqrestore+0x30/0x30
? blk_queue_enter+0x41c/0x4a0
kasan_report+0xab/0xe0
? blk_queue_enter+0x41c/0x4a0
blk_queue_enter+0x41c/0x4a0
? __irq_work_queue_local+0x75/0x1d0
? blk_queue_start_drain+0x70/0x70
? irq_work_queue+0x18/0x20
? vprintk_emit.part.0+0x1cc/0x350
? wake_up_klogd_work_func+0x60/0x60
blk_mq_alloc_request+0x2b7/0x6b0
? __blk_mq_alloc_requests+0x1060/0x1060
? __switch_to+0x5b7/0x1060
nvme_submit_user_cmd+0xa9/0x330
nvme_user_cmd.isra.0+0x240/0x3f0
? force_sigsegv+0xe0/0xe0
? nvme_user_cmd64+0x400/0x400
? vfs_fileattr_set+0x9b0/0x9b0
? cgroup_update_frozen_flag+0x24/0x1c0
? cgroup_leave_frozen+0x204/0x330
? nvme_ioctl+0x7c/0x2c0
blkdev_ioctl+0x1a8/0x4d0
? blkdev_common_ioctl+0x1930/0x1930
? fdget+0x54/0x380
__x64_sys_ioctl+0x129/0x190
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f765f703b0b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b
RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003
R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
</TASK>
Reported-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit b76b840fd933 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
io_uring task work dispatch makes an indirect call to struct io_kiocb's
io_task_work.func field to allow running arbitrary task work functions.
In the uring_cmd case, this calls io_uring_cmd_work(), which immediately
makes another indirect call to struct io_uring_cmd's task_work_cb field.
Change the uring_cmd task work callbacks to functions whose signatures
match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert
from the task work's struct io_tw_req argument to struct io_uring_cmd *.
Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid
manufacturing issue_flags in the uring_cmd task work callbacks. Now
uring_cmd task work dispatch makes a single indirect call to the
uring_cmd implementation's callback. This also allows removing the
task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for
future storage.
Since fuse_uring_send_in_task() now has access to the io_tw_token_t,
check its cancel field directly instead of relying on the
IO_URING_F_TASK_DEAD issue flag.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The dma_map_bvec helper doesn't work for p2p data, so use the same
blk_map_iter method that sgl uses for this memory type.
Reported-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The target code should set the sc_c bit in calculating the host response
based on the status of the 'concat' setting, otherwise we'll get an
authentication mismatch for hosts setting that bit correctly.
Fixes: 7e091add9c43 ("nvme-auth: update sc_c in host response")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
With TLS enabled, records that are encrypted and appended to TLS TX
list can fail to see a retry if the underlying TCP socket is busy, for
example, hitting an EAGAIN from tcp_sendmsg_locked(). This is not known
to the NVMe TCP driver, as the TLS layer successfully generated a record.
Typically, the TLS write_space() callback would ensure such records are
retried, but in the NVMe TCP Host driver, write_space() invokes
nvme_tcp_write_space(). This causes a partially sent record in the TLS TX
list to timeout after not being retried.
This patch fixes the above by calling queue->write_space(), which calls
into the TLS layer to retry any pending records.
Fixes: be8e82caa685 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The sc_c field is currently not updated in the host response to the
controller challenge leading to failures while attempting secure
channel concatenation. Fix this by adding a new sc_c variable to the
dhchap queue context structure which is appropriately set during
negotiate and then used in the host response.
Fixes: e88a7595b57f ("nvme-tcp: request secure channel concatenation")
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Prashanth Adurthi <prashana@netapp.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
For queue-depth I/O policy, this patch fixes unbalanced I/Os across
nvme multipaths.
Issue Description:
The RETRY disposition incorrectly increments ns->ctrl->nr_active
counter and reinitializes iostat start-time. In such cases nr_active
counter never goes back to zero until that path disconnects and
reconnects.
Such a path is not chosen for new I/Os if multiple RETRY cases on a given
a path cause its queue-depth counter to be artificially higher compared
to other paths. This leads to unbalanced I/Os across paths.
The patch skips incrementing nr_active if NVME_MPATH_CNT_ACTIVE is already
set. And it skips restarting io stats if NVME_MPATH_IO_STATS is already set.
base-commit: e989a3da2d371a4b6597ee8dee5c72e407b4db7a
Fixes: d4d957b53d91eeb ("nvme-multipath: support io stats on the mpath device")
Signed-off-by: Amit Chaudhary <achaudhary@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
for-6.18/block
Pull NVMe updates from Keith:
" - FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)"
* tag 'nvme-6.18-2025-09-23' of git://git.infradead.org/nvme:
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk
nvme-auth: use hkdf_expand_label()
nvme-auth: add hkdf_expand_label()
nvme-tcp: send only permitted commands for secure concat
nvme-fc: use lock accessing port_state and rport state
nvmet-fcloop: call done callback even when remote port is gone
nvmet-fc: avoid scheduling association deletion twice
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
nvme-auth: update bi_directional flag
|
|
The NVMe Base Specification 2.1 states that:
"""
A host requests an explicit persistent connection ... by specifying a
non-zero Keep Alive Timer value in the Connect command.
"""
As such if we are starting a persistent connection to a discovery
controller and the KATO is currently 0 we need to update KATO to a non
zero value to avoid continuous timeouts on the target.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Replace comment about required lock with a lockdep_assert_held()
check in the following functions:
- nvmet_p2pmem_ns_add_p2p()
- nvmet_setup_p2p_ns_map()
- nvmet_release_p2p_ns_map()
This ensures the subsystem lock is held at runtime.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Replace the current I/O controller check in
nvme_init_non_mdts_limits() with the helper nvme_is_io_ctrl()
function to maintain consistency with similar checks in other
parts of the code and improve code readability.
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
An administrative controller does not support I/O queues, hence it
should ignore existing checks for IOCCSZ/IORCSZ. Currently, these checks
only exclude a discovery controller but need to also exclude an
administrative controller.
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add nvme_is_io_ctrl() to check if the controller is of type I/O
controller. Uses negative logic by excluding an administrative
controller and a discovery controller.
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme uring_cmd only uses 32b CQEs. If the ring uses a mixed CQ, then
we need to make sure we flag the completion as a 32b CQE.
On the other hand, if nvme uring_cmd was using a dedicated 32b CQE, the
posting was missing the extra memcpy because it only applied to bit CQEs
on a mixed CQ.
Fixes: e26dca67fde1943 ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On the TUXEDO InfinityBook S Gen8, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (3.5 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When generating keying material during an authentication transaction
(secure channel concatenation), the HKDF-Expand-Label function is part
of the specified key derivation process.
The current open-coded implementation misses the length prefix
requirements on the HkdfLabel label and context variable-length vectors
(RFC 8446 Section 3.4).
Instead, use the hkdf_expand_label() function.
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Provide an implementation of RFC 8446 (TLS 1.3) HKDF-Expand-Label
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In addition to sending permitted commands such as connect/auth
over the initial unencrypted admin connection as part of secure
channel concatenation, the host also sends commands such as
Property Get and Identify on the same. This is a spec violation
leading to secure concat failures. Fix this by ensuring these
additional commands are avoided on this connection.
Fixes: 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation")
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_fc_unregister_remote removes the remote port on a lport object at
any point in time when there is no active association. This races with
with the reconnect logic, because nvme_fc_create_association is not
taking a lock to check the port_state and atomically increase the
active count on the rport.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/u4ttvhnn7lark5w3sgrbuy2rxupcvosp4qmvj46nwzgeo5ausc@uyrkdls2muwx
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the target port is gone, it's not possible to access any of the
request resources. The function should just silently drop the response.
The comment is misleading in this regard.
Though it's still necessary to call the driver via the ->done callback
so the driver is able to release all resources.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs-OBA0WMt5f7R0dz+rR4HcEz19YLhnyGsj-MRV3jWDsPg@mail.gmail.com/
Fixes: 84eedced1c5b ("nvmet-fcloop: drop response if targetport is gone")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When forcefully shutting down a port via the configfs interface,
nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and
then nvmet_disable_port(). Both functions will eventually schedule all
remaining associations for deletion.
The current implementation checks whether an association is about to be
removed, but only after the work item has already been scheduled. As a
result, it is possible for the first scheduled work item to free all
resources, and then for the same work item to be scheduled again for
deletion.
Because the association list is an RCU list, it is not possible to take
a lock and remove the list entry directly, so it cannot be looked up
again. Instead, a flag (terminating) must be used to determine whether
the association is already in the process of being deleted.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/rsdinhafrtlguauhesmrrzkybpnvwantwmyfq2ih5aregghax5@mhr7v3eryci3/
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.
Fixes: 710c69dbaccd ("nvmet-fc: avoid deadlock on delete association path")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While setting chap->s2 to zero as part of secure channel
concatenation, the host missed out to disable the bi_directional
flag to indicate that controller authentication is not requested.
Fix the same.
Fixes: e88a7595b57f ("nvme-tcp: request secure channel concatenation")
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We can now safely provide a block device when extracting user pages for
driver and user passthrough commands. Set the bdev so the caller doesn't
have to do that later. This has an additional benefit of being able to
extract P2P pages in the passthrough path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only need to consider data and metadata dma mapping types separately.
The request and bio integrity payload have enough flag bits to
internally track the mapping type for each. Use these so the caller
doesn't need to track them, and provide separete request and integrity
helpers to the common code. This will make it easier to scale new
mappings, like the proposed MMIO attribute, without burdening the caller
to track such things.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for ANS2 NVMe on Apple A11 SoC.
This version of ANS2 is less quirky than the one in M1, and does not have
NVMMU or Linear SQ. However, it still requires a non-standard 128-byte
SQE.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250826-t8015-nvme-v5-2-caee6ab00144@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-6.18/block
Pull struct block_device getgeo changes from Al.
"switching ->getgeo() from struct block_device to struct gendisk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"
* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block: switch ->getgeo() to struct gendisk
scsi: switch ->bios_param() to passing gendisk
scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
|
|
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Aligns data and metadata to the similar dma mapping scheme and removes
one more user of the scatter-gather dma mapping.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-10-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This can be reused by metadata sgls once that starts using the blk-mq
dma api.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-9-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparing for integrity dma mappings, we can't rely on the request
flag because data and metadata may have different mapping types.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 528589947c180 ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/
Fixes: 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
