| Age | Commit message (Collapse) | Author |
|---|
|
Intel Wildcat Lake derives its Thunderbolt/USB4 controller from Lunar
Lake platform. Add Wildcat Lake PCI ID to the driver list of supported
devices.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(),
which does not ensure that the delayed work item tunnel->dprx_work has
fully completed if it was already running. This leads to use-after-free
scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while
tunnel->dprx_work remains active and attempts to dereference tb_tunnel
in tb_dp_dprx_work().
A typical race condition is illustrated below:
CPU 0 | CPU 1
tb_dp_tunnel_active() |
tb_deactivate_and_free_tunnel()| tb_dp_dprx_start()
tb_tunnel_deactivate() | queue_delayed_work()
tb_dp_activate() |
tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker
cancel_delayed_work() |
tb_tunnel_put(tunnel); |
| tunnel = container_of(...); //UAF
| tunnel-> //UAF
Replacing cancel_delayed_work() with cancel_delayed_work_sync() is
not feasible as it would introduce a deadlock: both tb_dp_dprx_work()
and the cleanup path acquire tb->lock, and cancel_delayed_work_sync()
would wait indefinitely for the work item that cannot proceed.
Instead, implement proper reference counting:
- If cancel_delayed_work() returns true (work is pending), we release
the reference in the stop function.
- If it returns false (work is executing or already completed), the
reference is released in delayed work function itself.
This ensures the tb_tunnel remains valid during work item execution
while preventing memory leaks.
This bug was found by static analysis.
Fixes: d6d458d42e1e ("thunderbolt: Handle DisplayPort tunnel activation asynchronously")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make xdomain.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make usb4_port.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make usb4.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make tunnel.h function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make tunnel.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make tmu.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add missing parameters and struct/enum description in tb.h kernel-doc
comments. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make tb.h function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make tb.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make switch.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make retimer.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make property.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make path.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make nvm.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add missing description of fields in ring_desc struct found in
"nhi_regs.h". No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make nhi.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make lc.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make eeprom.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make domain.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make dma_port.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add missing @request field description in tb_cfg_request struct
kernel-doc. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make ctl.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make clx.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make cap.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make acpi.c function documentation compliant with current kernel-doc
standards. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Use string_choices.h helpers instead of hard-coded strings.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The thunderbolt driver sets up device link dependencies from hotplug ports
to the Host Router (aka Native Host Interface, NHI). When resuming from
system sleep, this allows the Host Router to re-establish tunnels to
attached Thunderbolt devices before the hotplug ports resume.
To identify the hotplug ports, the driver utilizes the is_hotplug_bridge
flag which also encompasses ACPI slots handled by the ACPI hotplug driver.
Thunderbolt hotplug ports are always Hot-Plug Capable PCIe ports, so it is
more apt to identify them with the is_pciehp flag.
Similarly, hotplug ports on older Thunderbolt controllers have broken MSI
support and are quirked to use legacy INTx interrupts instead. The quirk
identifies them with is_hotplug_bridge, even though all affected ports are
also matched by is_pciehp. So use is_pciehp here as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
There are other vendors now that have their own USB4 host router
hardware so using the Intel donated IDs may confuse users. For this
reason switch to use USB IDs provided by the Linux Foundation for
XDomain discovery.
Link: https://lore.kernel.org/linux-usb/20250722175026.1994846-1-Raju.Rangoju@amd.com/
Cc: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Use the hmac_sha256_usingrawkey() library function instead of the
"hmac(sha256)" crypto_shash. This is simpler and faster.
As a cleanup, change the input data parameters from "challenge,
sizeof(hmac)" to "challenge, sizeof(challenge)", so that the size is
being taken of the correct buffer. This is not a functional change,
since it happens that sizeof(hmac) == sizeof(challenge).
Replace the selection of CRYPTO and CRYPTO_HASH with CRYPTO_LIB_SHA256
and CRYPTO_LIB_UTILS. The latter is needed for crypto_memneq() which
was previously being pulled in via CRYPTO.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been
intended to be TBSVC_MATCH_PROTOCOL_REVISION.
Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol")
Cc: stable <stable@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB/Thunderbolt fixes in here for other patches to be on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes two minor typos in Thunderbolt driver comments:
Correct "passwd" -> "passed" in nvm.c.
Correct "boths" -> "both" in switch.c.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect")
fixated on the USB4 port sysfs wakeup file not working properly to control
policy, but it had an unintended side effect that the sysfs file controls
policy both at runtime and at suspend time. The sysfs file is supposed to
only control behavior while system is suspended.
Pass whether programming a port for runtime into usb4_switch_set_wake()
and if runtime then ignore the value in the sysfs file.
Cc: stable@vger.kernel.org
Reported-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Tested-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.16 merge window
This includes following USB4/Thunderbolt changes for the v6.16 merge
window:
- Enable wake on connect and disconnect over system suspend.
- Add mapping between Type-C ports and USB4 ports on non-Chrome systems.
- Expose tunneling related events to userspace.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
Documentation/admin-guide: Document Thunderbolt/USB4 tunneling events
thunderbolt: Notify userspace about firmware CM tunneling events
thunderbolt: Notify userspace about software CM tunneling events
thunderbolt: Introduce domain event message handler
usb: typec: Connect Type-C port with associated USB4 port
thunderbolt: Add Thunderbolt/USB4 <-> USB3 match function
thunderbolt: Expose usb4_port_index() to other modules
thunderbolt: Fix a logic error in wake on connect
thunderbolt: Use wake on connect and disconnect over suspend
|
|
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In the same way we do for software connection manager, send
notifications about tunneling changes done by the firmware connection
manager as well. There are some limitations with this though, for
example we only get "DP Configuration Changed" message from the firmware
without any indication if DisplayPort tunnel was activated or
deactivated. Also we don't get information about the tunnel itself
either so the event then looks like:
TUNNEL_EVENT=changed
TUNNEL_DETAILS=(DP)
XDomain connections are similar to what the software connection manager
sends.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This adds notification whenever software connection manager activates,
changes or deactivates a tunnel, and also if there is limitation in
bandwidth.
The notification looks like below:
TUNNEL_EVENT=activated|changed|deactivated|low bandwidth|
insufficient bandwidth
TUNNEL_DETAILS=0:12 <-> 1:20 (USB3)
Userspace can then listen these and inform user if needed. For example
if there is not enough bandwidth, it can show warning dialog to the user.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This patch introduces a function that can be used to send uevent
notifications in the domain to userspace. For instance, it can indicate
that a DisplayPort tunnel could not be established due to insufficient
bandwidth. Userspace can then forward to user via dialog or similar.
Convert boot_acl_store() to call this instead of open-coding.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function checks whether given USB4 port device matches with USB3.x
port device, using ACPI _DSD property.
It is designed to be used by component framework to match
USB4 ports with Type-C ports they are connected to.
Also, added USB4 config stub in case mapping function is not reachable.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Make usb4_port_index() available to other files in the driver, rename
and add function documentation.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
commit a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect
on USB4 ports") introduced a sysfs file to control wake up policy
for a given USB4 port that defaulted to disabled.
However when testing commit 4bfeea6ec1c02 ("thunderbolt: Use wake
on connect and disconnect over suspend") I found that it was working
even without making changes to the power/wakeup file (which defaults
to disabled). This is because of a logic error doing a bitwise or
of the wake-on-connect flag with device_may_wakeup() which should
have been a logical AND.
Adjust the logic so that policy is only applied when wakeup is
actually enabled.
Fixes: a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Wake on connect is useful for being able to wake up a suspended
laptop without opening the lid by plugging into a dock.
Add the default policy to the USB4 router when wakeup is enabled
for the router. Behavior for individual ports can be controlled
by port wakeup settings.
Cc: Opal Voravootivat <puthik@google.com>
Cc: Raul Rangel <rrangel@chromium.org>
Cc: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: Richard Gong <richard.gong@amd.com>
Cc: Sanath S <sanath.s@amd.com>
Link: https://lore.kernel.org/linux-usb/20250410042723.GU3152277@black.fi.intel.com/T/#m0249e8c0e1c77ec92a44a3d6c8b4a8e5a9b7114e
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
|
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.
In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.
Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
