| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull 'at_least' array size update from Eric Biggers:
"C supports lower bounds on the sizes of array parameters, using the
static keyword as follows: 'void f(int a[static 32]);'. This allows
the compiler to warn about a too-small array being passed.
As discussed, this reuse of the 'static' keyword, while standard, is a
bit obscure. Therefore, add an alias 'at_least' to compiler_types.h.
Then, add this 'at_least' annotation to the array parameters of
various crypto library functions"
* tag 'libcrypto-at-least-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha2: Add at_least decoration to fixed-size array params
lib/crypto: sha1: Add at_least decoration to fixed-size array params
lib/crypto: poly1305: Add at_least decoration to fixed-size array params
lib/crypto: md5: Add at_least decoration to fixed-size array params
lib/crypto: curve25519: Add at_least decoration to fixed-size array params
lib/crypto: chacha: Add at_least decoration to fixed-size array params
lib/crypto: chacha20poly1305: Statically check fixed array lengths
compiler_types: introduce at_least parameter decoration pseudo keyword
wifi: iwlwifi: trans: rename at_least variable to min_mode
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the sha2 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the sha1 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the poly1305 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the md5 library functions. This causes clang to warn when
a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the curve25519 library functions. This causes clang to
warn when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the chacha library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Several parameters of the chacha20poly1305 functions require arrays of
an exact length. Use the new at_least keyword to instruct gcc and
clang to statically check that the caller is passing an object of at
least that length.
Here it is in action, with this faulty patch to wireguard's cookie.h:
struct cookie_checker {
u8 secret[NOISE_HASH_LEN];
- u8 cookie_encryption_key[NOISE_SYMMETRIC_KEY_LEN];
+ u8 cookie_encryption_key[NOISE_SYMMETRIC_KEY_LEN - 1];
u8 message_mac1_key[NOISE_SYMMETRIC_KEY_LEN];
If I try compiling this code, I get this helpful warning:
CC drivers/net/wireguard/cookie.o
drivers/net/wireguard/cookie.c: In function ‘wg_cookie_message_create’:
drivers/net/wireguard/cookie.c:193:9: warning: ‘xchacha20poly1305_encrypt’ reading 32 bytes from a region of size 31 [-Wstringop-overread]
193 | xchacha20poly1305_encrypt(dst->encrypted_cookie, cookie, COOKIE_LEN,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
194 | macs->mac1, COOKIE_LEN, dst->nonce,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
195 | checker->cookie_encryption_key);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireguard/cookie.c:193:9: note: referencing argument 7 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/net/wireguard/messages.h:10,
from drivers/net/wireguard/cookie.h:9,
from drivers/net/wireguard/cookie.c:6:
include/crypto/chacha20poly1305.h:28:6: note: in a call to function ‘xchacha20poly1305_encrypt’
28 | void xchacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251123054819.2371989-4-Jason@zx2c4.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This reverts commit 0f8d42bf128d349ad490e87d5574d211245e40f1, with the
memcpy_sglist() part dropped.
Now that memcpy_sglist() no longer uses the skcipher_walk code, the
skcipher_walk code can be moved back to where it belongs.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on. The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.
Fix it by replacing it with a new implementation written from scratch.
It always succeeds. It's also a bit faster, since it avoids the
overhead of skcipher_walk. skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.
Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1f0 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf128d ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Migrate the x86_64 implementation of POLYVAL into lib/crypto/, wiring it
up to the POLYVAL library interface. This makes the POLYVAL library be
properly optimized on x86_64.
This drops the x86_64 optimizations of polyval in the crypto_shash API.
That's fine, since polyval will be removed from crypto_shash entirely
since it is unneeded there. But even if it comes back, the crypto_shash
API could just be implemented on top of the library API, as usual.
Adjust the names and prototypes of the assembly functions to align more
closely with the rest of the library code.
Also replace a movaps instruction with movups to remove the assumption
that the key struct is 16-byte aligned. Users can still align the key
if they want (and at least in this case, movups is just as fast as
movaps), but it's inconvenient to require it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Migrate the arm64 implementation of POLYVAL into lib/crypto/, wiring it
up to the POLYVAL library interface. This makes the POLYVAL library be
properly optimized on arm64.
This drops the arm64 optimizations of polyval in the crypto_shash API.
That's fine, since polyval will be removed from crypto_shash entirely
since it is unneeded there. But even if it comes back, the crypto_shash
API could just be implemented on top of the library API, as usual.
Adjust the names and prototypes of the assembly functions to align more
closely with the rest of the library code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for POLYVAL to lib/crypto/.
This will replace the polyval crypto_shash algorithm and its use in the
hctr2 template, simplifying the code and reducing overhead.
Specifically, this commit introduces the POLYVAL library API and a
generic implementation of it. Later commits will migrate the existing
architecture-optimized implementations of POLYVAL into lib/crypto/ and
add a KUnit test suite.
I've also rewritten the generic implementation completely, using a more
modern approach instead of the traditional table-based approach. It's
now constant-time, requires no precomputation or dynamic memory
allocations, decreases the per-key memory usage from 4096 bytes to 16
bytes, and is faster than the old polyval-generic even on bulk data
reusing the same key (at least on x86_64, where I measured 15% faster).
We should do this for GHASH too, but for now just do it for POLYVAL.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Replace sha3_generic.c with a new file sha3.c which implements the SHA-3
crypto_shash algorithms on top of the SHA-3 library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512,blake2b}.c.
Implement export_core and import_core, since crypto/hmac.c expects these
to be present. (Note that there is no security purpose in wrapping
SHA-3 with HMAC. HMAC was designed for older algorithms that don't
resist length extension attacks. But since someone could be using
"hmac(sha3-*)" via crypto_shash anyway, keep supporting it for now.)
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-15-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add SHA-3 support to lib/crypto/. All six algorithms in the SHA-3
family are supported: four digests (SHA3-224, SHA3-256, SHA3-384, and
SHA3-512) and two extendable-output functions (SHAKE128 and SHAKE256).
The SHAKE algorithms will be required for ML-DSA.
[EB: simplified the API to use fewer types and functions, fixed bug that
sometimes caused incorrect SHAKE output, cleaned up the
documentation, dropped an ad-hoc test that was inconsistent with
the rest of lib/crypto/, and many other cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This patch introduces infrastructure for allocating req objects on the
stack for AEADs. The additions mirror the existing sync skcipher APIs.
This can be used in cases where simple sync AEAD operations are being
done. So allocating the request on stack avoides possible out-of-memory
errors.
The struct crypto_sync_aead is a wrapper around crypto_aead and should
be used in its place when sync only requests will be done on the stack.
Correspondingly, the request should be allocated with
SYNC_AEAD_REQUEST_ON_STACK().
Similar to sync_skcipher APIs, the new sync_aead APIs are wrappers
around the regular aead APIs to facilitate sync only operations. The
following crypto APIs are added:
- struct crypto_sync_aead
- crypto_alloc_sync_aead()
- crypto_free_sync_aead()
- crypto_aync_aead_tfm()
- crypto_sync_aead_setkey()
- crypto_sync_aead_setauthsize()
- crypto_sync_aead_authsize()
- crypto_sync_aead_maxauthsize()
- crypto_sync_aead_ivsize()
- crypto_sync_aead_blocksize()
- crypto_sync_aead_get_flags()
- crypto_sync_aead_set_flags()
- crypto_sync_aead_clear_flags()
- crypto_sync_aead_reqtfm()
- aead_request_set_sync_tfm()
- SYNC_AEAD_REQUEST_ON_STACK()
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace blake2b_generic.c with a new file blake2b.c which implements the
BLAKE2b crypto_shash algorithms on top of the BLAKE2b library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512}.c.
Remove include/crypto/internal/blake2b.h since it is no longer used.
Likewise, remove struct blake2b_state from include/crypto/blake2b.h.
Omit support for import_core and export_core, since there are no legacy
drivers that need these for these algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add kerneldoc for the BLAKE2s library API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Replace aes used in drbg with library calls.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Export drbg_ctr_df() derivative function to new module df_sp80090.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
Pull interleaved SHA-256 hashing support from Eric Biggers:
"Optimize fsverity with 2-way interleaved hashing
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: Use 2-way interleaved SHA-256 hashing when supported
fsverity: Remove inode parameter from fsverity_hash_block()
lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()
lib/crypto: x86/sha256: Add support for 2-way interleaved hashing
lib/crypto: arm64/sha256: Add support for 2-way interleaved hashing
lib/crypto: sha256: Add support for 2-way interleaved hashing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
|
|
Commit 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in
af_alg_sendmsg") changed some fields from bool to 1-bit bitfields of
type u32.
However, some assignments to these fields, specifically 'more' and
'merge', assign values greater than 1. These relied on C's implicit
conversion to bool, such that zero becomes false and nonzero becomes
true.
With a 1-bit bitfields of type u32 instead, mod 2 of the value is taken
instead, resulting in 0 being assigned in some cases when 1 was intended.
Fix this by restoring the bool type.
Fixes: 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's no longer required to use nth_page() when iterating pages within a
single SG entry, so let's drop the nth_page() usage.
Link: https://lkml.kernel.org/r/20250901150359.867252-34-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation
code into acomp"), the crypto_acomp_streams struct was made to rely on
having the alloc_ctx and free_ctx operations defined in the same order
as the scomp_alg struct. But in that same commit, the alloc_ctx and
free_ctx members of scomp_alg may be randomized by structure layout
randomization, since they are contained in a pure ops structure
(containing only function pointers). If the pointers within scomp_alg
are randomized, but those in crypto_acomp_streams are not, then
the order may no longer match. This fixes the problem by removing the
union from scomp_alg so that both crypto_acomp_streams and scomp_alg
will share the same definition of alloc_ctx and free_ctx, ensuring
they will always have the same layout.
Signed-off-by: Dan Moulding <dan@danm.net>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing.
Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many arm64 and x86_64 CPUs can compute two SHA-256 hashes in nearly the
same speed as one, if the instructions are interleaved. This is because
SHA-256 is serialized block-by-block, and two interleaved hashes take
much better advantage of the CPU's instruction-level parallelism.
Meanwhile, a very common use case for SHA-256 hashing in the Linux
kernel is dm-verity and fs-verity. Both use a Merkle tree that has a
fixed block size, usually 4096 bytes with an empty or 32-byte salt
prepended. Usually, many blocks need to be hashed at a time. This is
an ideal scenario for 2-way interleaved hashing.
To enable this optimization, add a new function sha256_finup_2x() to the
SHA-256 library API. It computes the hash of two equal-length messages,
starting from a common initial context.
For now it always falls back to sequential processing. Later patches
will wire up arm64 and x86_64 optimized implementations.
Note that the interleaving factor could in principle be higher than 2x.
However, that runs into many practical difficulties and CPU throughput
limitations. Thus, both the implementations I'm adding are 2x. In the
interest of using the simplest solution, the API matches that.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move curve25519() and curve25519_generate_public() from curve25519.h to
curve25519.c. There's no good reason for them to be inline.
Link: https://lore.kernel.org/r/20250906213523.84915-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the Curve25519 test from an ad-hoc self-test to a KUnit test.
Generally keep the same test logic for now, just translated to KUnit.
There's one exception, which is that I dropped the incomplete test of
curve25519_generic(). The approach I'm taking to cover the different
implementations with the KUnit tests is to just rely on booting kernels
in QEMU with different '-cpu' options, rather than try to make the tests
(incompletely) test multiple implementations on one CPU. This way, both
the test and the library API are simpler.
This commit makes the file lib/crypto/curve25519.c no longer needed, as
its only purpose was to call the self-test. However, keep it for now,
since a later commit will add code to it again.
Temporarily omit the default value of CRYPTO_SELFTESTS that the other
lib/crypto/ KUnit tests have. It would cause a recursive kconfig
dependency, since the Curve25519 code is still entangled with CRYPTO. A
later commit will fix that.
Link: https://lore.kernel.org/r/20250906213523.84915-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
As was done with the other algorithms, reorganize the BLAKE2s code so
that the generic implementation and the arch-specific "glue" code is
consolidated into a single translation unit, so that the compiler will
inline the functions and automatically decide whether to include the
generic code in the resulting binary or not.
Similarly, also consolidate the build rules into
lib/crypto/{Makefile,Kconfig}. This removes the last uses of
lib/crypto/{arm,x86}/{Makefile,Kconfig}, so remove those too.
Don't keep the !KMSAN dependency. It was needed only for other
algorithms such as ChaCha that initialize memory from assembly code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove the original BLAKE2s self-test, since it will be superseded by
blake2s_kunit.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Consolidate the ChaCha code into a single module (excluding
chacha-block-generic.c which remains always built-in for random.c),
similar to various other algorithms:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/chacha.h,
replacing lib/crypto/$(SRCARCH)/chacha*.c. The header defines
chacha_crypt_arch() and hchacha_block_arch(). It is included by
lib/crypto/chacha.c, and thus the code gets built into the single
libchacha module, with improved inlining in some cases.
- Whether arch-optimized ChaCha is buildable is now controlled centrally
by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig.
The conditions for enabling it remain the same as before, and it
remains enabled by default.
- Any additional arch-specific translation units for the optimized
ChaCha code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
This removes the last use for the Makefile and Kconfig files in the
arm64, mips, powerpc, riscv, and s390 subdirectories of lib/crypto/. So
also remove those files and the references to them.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
chacha_is_arch_optimized() is no longer used, so remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Consolidate the Poly1305 code into a single module, similar to various
other algorithms (SHA-1, SHA-256, SHA-512, etc.):
- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h,
replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines
poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and
optionally poly1305_mod_init_arch(). It is included by
lib/crypto/poly1305.c, and thus the code gets built into the single
libpoly1305 module, with improved inlining in some cases.
- Whether arch-optimized Poly1305 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default. (The PPC64 one
remains unconditionally disabled due to 'depends on BROKEN'.)
- Any additional arch-specific translation units for the optimized
Poly1305 code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
A special consideration is needed because the Adiantum code uses the
poly1305_core_*() functions directly. For now, just carry forward that
approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig
symbol, and keeping the poly1305_core_*() functions in separate
translation units. So it's not quite as streamlined I've done with the
other hash functions, but we still get a single libpoly1305 module.
Note: to see the diff from the arm, arm64, and x86 .c files to the new
.h files, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
poly1305_is_arch_optimized() is unused, so remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add library functions for MD5, including HMAC support. The MD5
implementation is derived from crypto/md5.c. This closely mirrors the
corresponding SHA-1 and SHA-2 changes.
Like SHA-1 and SHA-2, support for architecture-optimized MD5
implementations is included. I originally proposed dropping those, but
unfortunately there is an AF_ALG user of the PowerPC MD5 code
(https://lore.kernel.org/r/c4191597-341d-4fd7-bc3d-13daf7666c41@csgroup.eu/),
and dropping that code would be viewed as a performance regression. We
don't add new software algorithm implementations purely for AF_ALG, as
escalating to kernel mode merely to do calculations that could be done
in userspace is inefficient and is completely the wrong design. But
since this one already existed, it gets grandfathered in for now. An
objection was also raised to dropping the SPARC64 MD5 code because it
utilizes the CPU's direct support for MD5, although it remains unclear
that anyone is using that. Regardless, we'll keep these around for now.
Note that while MD5 is a legacy algorithm that is vulnerable to
practical collision attacks, it still has various in-kernel users that
implement legacy protocols. Switching to a simple library API, which is
the way the code should have been organized originally, will greatly
simplify their code. For example:
MD5:
drivers/md/dm-crypt.c (for lmk IV generation)
fs/nfsd/nfs4recover.c
fs/ecryptfs/
fs/smb/client/
net/{ipv4,ipv6}/ (for TCP-MD5 signatures)
HMAC-MD5:
fs/smb/client/
fs/smb/server/
(Also net/sctp/ if it continues using HMAC-MD5 for cookie generation.
However, that use case has the flexibility to upgrade to a more modern
algorithm, which I'll be proposing instead.)
As usual, the "md5" and "hmac(md5)" crypto_shash algorithms will also be
reimplemented on top of these library functions. For "hmac(md5)" this
will provide a faster, more streamlined implementation.
Link: https://lore.kernel.org/r/20250805222855.10362-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move S390_SHA_CTX_SIZE into crypto/hash.h so that the derivation
of HASH_MAX_DESCSIZE is less cryptic.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that broke hmac(sha3-224-s390)"
* tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hash - Increase HASH_MAX_DESCSIZE for hmac(sha3-224-s390)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
|
|
The value of HASH_MAX_DESCSIZE is off by one for hmac(sha3-224-s390).
Fix this so that hmac(sha3-224-s390) can be registered.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 6f90ba706551 ("crypto: s390/sha3 - Use API partial block handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
|
