| Age | Commit message (Collapse) | Author |
|---|
|
The v4l2_isp_params_block_info structure contains validation information
that apply to a block -type- and not only to a specific ISP block
implementation.
Clarify this by renaming v4l2_isp_params_block_info in
v4l2_isp_params_block_type_info and update the documentation and the
users of v4l2-isp accordingly.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add to the V4L2 framework helper functions to support drivers when
validating a buffer of V4L2 ISP parameters.
Driver shall use v4l2_isp_params_validate_buffer_size() to verify the
size correctness of the data received from userspace, and after having
copied the data to a kernel-only memory location, complete the
validation by calling v4l2_isp_params_validate_buffer().
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Sometimes, users will not use all of the MIPI CSI 2 lanes available when
connecting to the MIPI CSI receiver of their device. Add a helper
function that checks the mbus_config for the device driver to allow
users to define the number of active data lanes through the
get_mbus_config op.
If the driver does not implement this op, fall back to using the maximum
number of lanes available.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vbi_fops stored in struct saa7146_ext_vv is a full
v4l2_file_operations, but only its .write field is used. Replace it with
a single vbi_write function pointer to save memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Retain the constness of the graph objects and interfaces in macros to
obtain their containers, by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Retain the constness of the object in media_entity_to_video_device() and
to_video_device(), by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Retain the constness of the object in media_entity_to_v4l2_subdev(), by
switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_m2m_buf_copy_metadata() function takes a boolean
copy_frame_flags argument. When true, it causes the function to copy the
V4L2_BUF_FLAG_KEYFRAME, V4L2_BUF_FLAG_BFRAME and V4L2_BUF_FLAG_PFRAME
flags from the output buffer to the capture buffer.
There is no use cases in any upstream driver for copying the flags.
KEY/P/B frames are properties of the bitstream buffer in some formats.
Once decoded, this is no longer a property of the video frame and should
be discarded.
It was considered useful to know if an uncompressed frame was decoded
from a KEY/P/B compressed frame, and to preserve that information if
that same uncompressed frame was passed through another M2M device (e.g.
a scaler). However, the V4L2 documentation makes it clear that the flags
are meant for compressed frames only.
Drop the copy_frame_flags argument from v4l2_m2m_buf_copy_metadata().
The change to drivers was performed with the following Coccinelle
semantic patch:
@@
expression src;
expression dst;
expression flag;
@@
- v4l2_m2m_buf_copy_metadata(src, dst, flag);
+ v4l2_m2m_buf_copy_metadata(src, dst);
include/media/v4l2-mem2mem.h and drivers/media/v4l2-core/v4l2-mem2mem.c
have been updated manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_m2m_get_vq() never returns a NULL pointer, as the internal
get_queue_ctx() helper always returns a non-NULL pointer. Many drivers
check the return value against NULL, due to a combination of old code
and cargo-cult programming. Even v4l2-mem2mem.c contains unneeded NULL
checks.
Clarify the API by documenting explicitly that a NULL check is not
needed, and simplify the code by removing the unneeded NULL checks from
v4l2-mem2mem.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Commit cbd9463da1b1 ("media: v4l2-mem2mem: Avoid calling .device_run in
v4l2_m2m_job_finish") deferred calls to .device_run() to a work queue to
avoid recursive calls when a job is finished right away from
.device_run(). It failed to update the v4l2_m2m_job_finish()
documentation that still states the function must not be called from
.device_run(). Fix it.
Fixes: cbd9463da1b1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The recently introduced devm_v4l2_sensor_clk_get() helper aims at
simplifying sensor drivers by centralizing clock handling code, as well
as reducing cargo-cult and deprecated behaviour.
A set of drivers implement external clock handling in a non-standard
way. This can't be changed as there is a high risk of breaking existing
platforms, but keeping the code as-is creates a risk of new drivers
copying deprecated behaviour.
To fix this, introduce a new devm_v4l2_sensor_clk_get_legacy() helper
and use it in those driver. Compared to devm_v4l2_sensor_clk_get(), the
new helper takes the "clock-frequency" property into account and sets
the external clock rate on OF platforms, and adds the ability to specify
a fixed default or fallback clock rate in case the "clock-frequency"
property is not present.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The last user of the mt9v032 driver through board files and platform
data has long been removed. Drop support for platform data from the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The mt9v022 driver got removed in commit e7eab49132ba ("media:
staging/media/soc_camera: remove this driver"), but its platform header
file got left behind. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace hverkuil@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace hansverk@cisco.com by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for DRM (Dynamic Range and Mastering) InfoFrames.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The v4l2_get_link_freq() macro doesn't modify the pad argument. Make it
possible to call it with a const media_pad pointer.
Link: https://lore.kernel.org/r/20250822002734.23516-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The output pixel interface is a parallel bus (32 bits), which
supports sending multiple pixels (1, 2 or 4) per clock cycle for
smaller pixel widths like RAW8-RAW16.
Dual-pixel and Quad-pixel modes can be a requirement if the export rate
of the Cadence IP in Single-pixel mode maxes out before the maximum
supported DPHY-RX frequency, which is the case with TI's integration of
this IP [1].
So, we export a function that lets the downstream hardware block request
a higher pixel-per-clock on a particular output pad.
We check if we can support the requested pixels per clock given the
known maximum for the currently configured format. If not, we set it
to the highest feasible value and return this value to the caller.
[1] Section 12.6.1.4.8.14 CSI_RX_IF Programming Restrictions of AM62 TRM
Link: https://www.ti.com/lit/pdf/spruj16
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document that v4l2_get_link_freq() obtains the link frequency primarily
by calling the get_mbus_config sub-device pad operation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove the workaround that allowed calling v4l2_get_link_freq() on the
control handler.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 982c0487185b ("media: subdev: Add v4l2_subdev_call_state_try() macro")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aJTNtpDUbTz7eyJc%40stanley.mountain/
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_subdev_stream_config structure holds configuration data for a
stream. It was meant to be used internally only, but already found its
way into the ds90ub913 driver. Now that the driver has been fixed, make
the structure private to v4l2-subdev.c to avoid using it by accident.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove the extra leading period and provide more elaborate explanation for
why devm_v4l2_sensor_clk_get() is only allowed to be used on camera sensor
devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce a helper for v4l2 sensor drivers on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.
This helper behaves the same as devm_clk_get() except where there is
no clock producer like in ACPI-based platforms.
For ACPI-based platforms the function will read the "clock-frequency"
ACPI _DSD property and register a fixed frequency clock with the frequency
indicated in the property.
This function also handles the special ACPI-based system case where:
. The clock-frequency _DSD property is present.
. A reference to the clock producer is present, where the clock is provided
by a camera sensor PMIC driver (e.g. int3472/tps68470.c)
In this case try to set the clock-frequency value to the provided clock.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The second argument to the ioctl handlers is not a file handle any more.
Rename it from 'void *fh' to 'void *priv' in the V4L2 core, to avoid
misconceptions.
While at it, align function arguments in include/media/v4l2-mem2mem.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now that all drivers access the v4l2_fh from the file structure, there
is no need to pass it as an explicit argument to ioctl handlers. Set the
argument to NULL in the __video_do_ioctl() function, and rename the 'fh'
argument in the ioctl handler declarations to 'priv' indicate it does
not contain a file handle.
The argument could be removed altogether with a mechanical change
(probably using coccinelle), but there are plans to pass a new argument
to the ioctl handlers in the near future. The tree-wide change to remove
the argument, only to add another one soon after, would be too much
churn.
While at it, fix argument alignment in vidioc_try_fmt_vid_out_overlay().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH
checks through the V4L2 core.
To ensure that all new drivers use v4l2_fh, keep setting the
V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after
the .open() file operation returns.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The paragraph in the v4l2_fh_del() documentation that indicates the
function sets filp->private_data was added in the wrong place. It is
meant for v4l2_fh_open(). Move it to where it belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily convert
implicitly to any pointer type. To avoid direct access to
file->private_data, introduce a new inline function that retrieves the
v4l2_fh pointer, and use it to replace common access patterns through
the kernel.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
struct file *filp;
identifier fh;
@@
- struct v4l2_fh *fh = filp->private_data;
+ struct v4l2_fh *fh = file_to_v4l2_fh(filp);
Manual changes have been applied to Documentation/ to update the usage
patterns, and to include/media/v4l2-fh.h to add the new function.
While at it, fix a typo in the title of v4l2-fh.rst: the file describes
the "file handles" API, not "file handlers".
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
video_translate_cmd() can be useful for drivers to convert between the
VIDIOC_*32 and VIDIOC_ defines. Let's export it.
Now that the function is exported, use this opportunity to rename the
function with the v4l2_ prefix, that is less ambiguous than video_
The VIDIOC_*32 defines are not accessible by the drivers, they live in
v4l2-compat-ioctl32.c.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-6-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
There are no consumers or implementations left in tree for the subdevice
operation g_pixelaspect, delete it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250705083741.77517-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Make media_entity_to_video_device(NULL) return NULL, instead of an invalid
pointer value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
v4l2_ctrl_handler_free() used to return void but changing this to int,
returning the handler's error code, enables the drivers to simply return
the handler's error in this common error handling pattern:
if (handler->error)
return v4l2_ctrl_handler_free(handler);
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add support for VSPX, a specialized version of the VSP2 that
transfers data to the ISP. The VSPX is composed of two RPF units
to read data from external memory and an IIF instance that performs
transfer towards the ISP.
The VSPX is supported through a newly introduced vsp1_vspx.c file that
exposes two interfaces: vsp1_vspx interface, declared in vsp1_vspx.h
for the vsp1 core to initialize and cleanup the VSPX, and a vsp1_isp
interface, declared in include/media/vsp1.h for the ISP driver to
control the VSPX operations.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250617-b4-vspx-v13-1-9f4054c1c9af@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add a function to perform soft reset of the FCP.
It is intended to support the correct stop procedure of the VSPX-FCPVX
and VSPD-FCPD pairs according to section "62.3.7.3 Reset Operation" of
the R-Car Hardware Manual at revision 1.20.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250616-vspx-reset-v2-1-6cc12ed7e9bb@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The functions:
v4l2_jpeg_parse_huffman_tables()
v4l2_jpeg_parse_quantization_tables()
v4l2_jpeg_parse_scan_header()
and
v4l2_jpeg_parse_frame_header()
were added in 2020 by
commit 50733b5b9102 ("media: add v4l2 JPEG helpers")
but have remained unused.
Remove them.
They're all just wrappers around an underlying set of helpers,
which are all still called via v4l2_jpeg_parse_header().
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
v4l2_find_nearest_size() returns a mode from sensor driver's mode list
that is a best match width and height wise for the sensor. Some drivers
have different set of available modes depending on the number of lanes.
While this could be handled within a driver by providing different lists
of modes, provide a helper v4l2_find_nearest_size_conditional() to ignore
modes that aren't available.
Also use size_t for the array index and remove extra commas while at it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Now that the VSP1 driver supports color spaces, expose them through the
API used by the DU driver. This allows configuring the YCbCr encoding
and quantization used by each plane, ensuring correct color rendering.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-9-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
We use this logic in a couple of places. Refactor into a function.
No functional change expected from this patch.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidiod_ext_ctrl. We can remove this callback.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidioc_g_ext_ctrls callback. We can remove this callback.
Thanks for your service!
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidioc_query_ext_ctrl. We can remove this callback to reduce the
temptation of new drivers to implement it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Reorder the fields in these structs so that we waste less space due to
padding. pahole shows that lirc_fh is 8 bytes smaller, and rc_dev is 32
bytes smaller.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
|
|
Add p_rect to struct v4l2_ext_control with basic support in
v4l2-ctrls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-1-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
'struct tunertype', 'struct tuner_range' and 'struct tuner_params' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
2877 8554 0 11431 2ca7 drivers/media/tuners/tuner-types.o
After:
=====
text data bss dec hex filename
11421 48 0 11469 2ccd drivers/media/tuners/tuner-types.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This new function determines how many blocks the EDID has.
Traditionally the number of extension blocks is read from
the EDID at offset 126, but this can be overridden by the
HDMI Forum EDID Extension Override Data Block. So check
that as well in this helper.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Memset the config argument to get_mbus_config V4L2 sub-device pad
operation to zero before calling the operation. This ensures the callers
don't need to bother with it nor the implementations need to set all
fields that may not be relevant to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
