| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.
[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
|
Change Device::vendor_id() to return a Vendor type, and change
DeviceId::from_id() to accept a Vendor type.
Use the new pci::Vendor in the various Rust for Linux callers who were
previously using bindings::PCI_VENDOR_ID_*.
Doing so also allows removing "use kernel::bindings" entirely from most
of the affected files here.
Also, mark vendor_id() as inline.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250829223632.144030-6-jhubbard@nvidia.com
[ Replace "as a validated vendor" with "as [`Vendor`]". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Update call sites in the driver-core files and its related samples
to import `ARef` and `AlwaysRefCounted` from `sync::aref`
instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://lore.kernel.org/r/20250814104615.355106-1-shankari.ak0208@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Reset the pci-testdev when the driver is unbound from its device.
Link: https://lore.kernel.org/r/20250621195118.124245-9-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
So far Devres uses an inner memory allocation and reference count, i.e.
an inner Arc, in order to ensure that the devres callback can't run into
a use-after-free in case where the Devres object is dropped while the
devres callback runs concurrently.
Instead, use a completion in order to avoid a potential UAF: In
Devres::drop(), if we detect that we can't remove the devres action
anymore, we wait for the completion that is completed from the devres
callback. If, in turn, we were able to successfully remove the devres
action, we can just go ahead.
This, again, allows us to get rid of the internal Arc, and instead let
Devres consume an `impl PinInit<T, E>` in order to return an
`impl PinInit<Devres<T>, E>`, which enables us to get away with less
memory allocations.
Additionally, having the resulting explicit synchronization in
Devres::drop() prevents potential subtle undesired side effects of the
devres callback dropping the final Arc reference asynchronously within
the devres callback.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250626200054.243480-4-dakr@kernel.org
[ Move '# Invariants' below '# Examples'. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
For the I/O operations executed from the probe() method, take advantage
of Devres::access(), avoiding the atomic check and RCU read lock required
otherwise entirely.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://lore.kernel.org/r/20250428140137.468709-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This method limits the scope of the revocable guard and is considered
safer to use for most cases, so let's showcase it here.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250411-try_with-v4-2-f470ac79e2e2@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
As by now, pci::Device is implemented as:
#[derive(Clone)]
pub struct Device(ARef<device::Device>);
This may be convenient, but has the implication that drivers can call
device methods that require a mutable reference concurrently at any
point of time.
Instead define pci::Device as
pub struct Device<Ctx: DeviceContext = Normal>(
Opaque<bindings::pci_dev>,
PhantomData<Ctx>,
);
and manually implement the AlwaysRefCounted trait.
With this we can implement methods that should only be called from
bus callbacks (such as probe()) for pci::Device<Core>. Consequently, we
make this type accessible in bus callbacks only.
Arbitrary references taken by the driver are still of type
ARef<pci::Device> and hence don't provide access to methods that are
reserved for bus callbacks.
Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the `module!` macro, the `author` field is currently of type `String`.
Since modules can have multiple authors, this limitation prevents
specifying more than one.
Add an `authors` field as `Option<Vec<String>>` to allow creating
modules with multiple authors, and change the documentation and all
current users to use it. Eventually, the single `author` field may
be removed.
[ The `modinfo` key needs to still be `author`; otherwise, tooling
may not work properly, e.g.:
$ modinfo --author samples/rust/rust_print.ko
Rust for Linux Contributors
I have also kept the original `author` field (undocumented), so
that we can drop it more easily in a kernel cycle or two.
- Miguel ]
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/244
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Link: https://lore.kernel.org/r/20250309175712.845622-2-trintaeoitogc@gmail.com
[ Fixed `modinfo` key. Kept `author` field. Reworded message
accordingly. Updated my email. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rename the I/O accessors provided by `Io` to encode the type as
number instead of letter. This is in preparation for Port I/O support
to use a trait for generic accessors.
Add a `c_fn` argument to the accessor generation macro to translate
between rust and C names.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/PIO.20support/near/499460541
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-io-generic-rename-v1-1-06d97a9e3179@kloenk.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit adds a sample Rust PCI driver for QEMU's "pci-testdev"
device. To enable this device QEMU has to be called with
`-device pci-testdev`.
The same driver shows how to use the PCI device / driver abstractions,
as well as how to request and map PCI BARs, including a short sequence of
MMIO operations.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-12-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
