| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Enable parallel hotplug for RISC-V
- Optimize vector regset allocation for ptrace()
- Add a kernel selftest for the vector ptrace interface
- Enable the userspace RAID6 test to build and run using RISC-V vectors
- Add initial support for the Zalasr RISC-V ratified ISA extension
- For the Zicbop RISC-V ratified ISA extension to userspace, expose
hardware and kernel support to userspace and add a kselftest for
Zicbop
- Convert open-coded instances of 'asm goto's that are controlled by
runtime ALTERNATIVEs to use riscv_has_extension_{un,}likely(),
following arm64's alternative_has_cap_{un,}likely()
- Remove an unnecessary mask in the GFP flags used in some calls to
pagetable_alloc()
* tag 'riscv-for-linus-6.19-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: Add Zicbop prefetch test
riscv: hwprobe: Expose Zicbop extension and its block size
riscv: Introduce Zalasr instructions
riscv: hwprobe: Export Zalasr extension
dt-bindings: riscv: Add Zalasr ISA extension description
riscv: Add ISA extension parsing for Zalasr
selftests: riscv: Add test for the Vector ptrace interface
riscv: ptrace: Optimize the allocation of vector regset
raid6: test: Add support for RISC-V
raid6: riscv: Allow code to be compiled in userspace
raid6: riscv: Prevent compiler from breaking inline vector assembly code
riscv: cmpxchg: Use riscv_has_extension_likely
riscv: bitops: Use riscv_has_extension_likely
riscv: hweight: Use riscv_has_extension_likely
riscv: checksum: Use riscv_has_extension_likely
riscv: pgtable: Use riscv_has_extension_unlikely
riscv: Remove __GFP_HIGHMEM masking
RISC-V: Enable HOTPLUG_PARALLEL for secondary CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fix from Steven Rostedt:
- Fix incorrect variable in error message in config-bisect.pl
If the old config file fails to get copied as the last good or bad
config file, then it fails the program and prints an error message.
But the variable used to print what the old config's name was
incorrect. It was $config when it should have been $output_config.
* tag 'ktest-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix uninitialized var in config-bisect.pl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Adapt the ftracetest script to be run from a different folder
This uses the already existing OPT_TEST_DIR but extends it further to
run independent tests, then add an --rv flag to allow using the
script for testing RV (mostly) independently on ftrace.
- Add basic RV selftests in selftests/verification for more validations
Add more validations for available/enabled monitors and reactors.
This could have caught the bug introducing kernel panic solved above.
Tests use ftracetest.
- Convert react() function in reactor to use va_list directly
Use a central helper to handle the variadic arguments. Clean up
macros and mark functions as static.
- Add lockdep annotations to reactors to have lockdep complain of
errors
If the reactors are called from improper context. Useful to develop
new reactors. This highlights a warning in the panic reactor that is
related to the printk subsystem and not to RV.
- Convert core RV code to use lock guards and __free helpers
This completely removes goto statements.
- Fix compilation if !CONFIG_RV_REACTORS
Fix the warning by keeping LTL monitor variable as always static.
* tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix compilation if !CONFIG_RV_REACTORS
rv: Convert to use __free
rv: Convert to use lock guard
rv: Add explicit lockdep context for reactors
rv: Make rv_reacting_on() static
rv: Pass va_list to reactors
selftests/verification: Add initial RV tests
selftest/ftrace: Generalise ftracetest to use with RV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla trace tooling updates from Steven Rostedt:
- Officially add Tomas Glozar as a maintainer to RTLA tool
- Add for_each_monitored_cpu() helper
In multiple places, RTLA tools iterate over the list of CPUs running
tracer threads.
Use single helper instead of repeating the for/if combination.
- Remove unused variable option_index in argument parsing
RTLA tools use getopt_long() for argument parsing. For its last
argument, an unused variable "option_index" is passed.
Remove the variable and pass NULL to getopt_long() to shorten the
naturally long parsing functions, and make them more readable.
- Fix unassigned nr_cpus after code consolidation
In recent code consolidation, timerlat tool cleanup, previously
implemented separately for each tool, was moved to a common function
timerlat_free().
The cleanup relies on nr_cpus being set. This was not done in the new
function, leaving the variable uninitialized.
Initialize the variable properly, and remove silencing of compiler
warning for uninitialized variables.
- Stop tracing on user latency in BPF mode
Despite the name, rtla-timerlat's -T/--thread option sets timerlat's
stop_tracing_total_us option, which also stops tracing on
return-from-user latency, not only on thread latency.
Implement the same behavior also in BPF sample collection stop
tracing handler to avoid a discrepancy and restore correspondence of
behavior with the equivalent option of cyclictest.
- Fix threshold actions always triggering
A bug in threshold action logic caused the action to execute even if
tracing did not stop because of threshold.
Fix the logic to stop correctly.
- Fix few minor issues in tests
Extend tests that were shown to need it to 5s, fix osnoise test
calling timerlat by mistake, and use new, more reliable output
checking in timerlat's "top stop at failed action" test.
- Do not print usage on argument parsing error
RTLA prints the entire usage message on encountering errors in
argument parsing, like a malformed CPU list.
The usage message has gotten too long. Instead of printing it, use
newly added fatal() helper function to simply exit with the error
message, excluding the usage.
- Fix unintuitive -C/--cgroup interface
"-C cgroup" and "--cgroup cgroup" are invalid syntax, despite that
being a common way to specify an option with argument. Moreover,
using them fails silently and no cgroup is set.
Create new helper function to unify the handling of all such options
and allow all of:
-Xsomething
-X=something
-X something
as well as the equivalent for the long option.
- Fix -a overriding -t argument filename
Fix a bug where -a following -t custom_file.txt overrides the custom
filename with the default timerlat_trace.txt.
- Stop tracing correctly on multiple events at once
In some race scenarios, RTLA BPF sample collection might send
multiple stop tracing events via the BPF ringbuffer at once.
Compare the number of events for != 0 instead of == 1 to cover for
this scenario and stop tracing properly.
* tag 'trace-tools-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Exit top main loop on any non-zero wait_retval
rtla/tests: Don't rely on matching ^1ALL
rtla: Fix -a overriding -t argument
rtla: Fix -C/--cgroup interface
tools/rtla: Replace osnoise_hist_usage("...") with fatal("...")
tools/rtla: Replace osnoise_top_usage("...") with fatal("...")
tools/rtla: Replace timerlat_hist_usage("...") with fatal("...")
tools/rtla: Replace timerlat_top_usage("...") with fatal("...")
tools/rtla: Add fatal() and replace error handling pattern
rtla/tests: Fix osnoise test calling timerlat
rtla/tests: Extend action tests to 5s
tools/rtla: Fix --on-threshold always triggering
rtla/timerlat_bpf: Stop tracing on user latency
tools/rtla: Fix unassigned nr_cpus
tools/rtla: Remove unused optional option_index
tools/rtla: Add for_each_monitored_cpu() helper
MAINTAINERS: Add Tomas Glozar as a maintainer to RTLA tool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains changes to unify TPM return code translation between
trusted_tpm2 and TPM driver itself. Other than that the changes are
either bug fixes or minor imrovements"
* tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2
tpm: Use -EPERM as fallback error code in tpm_ret_to_err
tpm: Cap the number of PCR banks
tpm: Remove tpm_find_get_ops
tpm: add WQ_PERCPU to alloc_workqueue users
tpm_crb: add missing loc parameter to kerneldoc
tpm_crb: Fix a spelling mistake
selftests: tpm2: Fix ill defined assertions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This is a pretty consequential cycle for iommufd, though this pull is
not too big. It is based on a shared branch with VFIO that introduces
VFIO_DEVICE_FEATURE_DMA_BUF a DMABUF exporter for VFIO device's MMIO
PCI BARs. This was a large multiple series journey over the last year
and a half.
Based on that work IOMMUFD gains support for VFIO DMABUF's in its
existing IOMMU_IOAS_MAP_FILE, which closes the last major gap to
support PCI peer to peer transfers within VMs.
In Joerg's iommu tree we have the "generic page table" work which aims
to consolidate all the duplicated page table code in every iommu
driver into a single algorithm. This will be used by iommufd to
implement unique page table operations to start adding new features
and improve performance.
In here:
- Expand IOMMU_IOAS_MAP_FILE to accept a DMABUF exported from VFIO.
This is the first step to broader DMABUF support in iommufd, right
now it only works with VFIO. This closes the last functional gap
with classic VFIO type 1 to safely support PCI peer to peer DMA by
mapping the VFIO device's MMIO into the IOMMU.
- Relax SMMUv3 restrictions on nesting domains to better support
qemu's sequence to have an identity mapping before the vSID is
established"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3-iommufd: Allow attaching nested domain for GBPA cases
iommufd/selftest: Add some tests for the dmabuf flow
iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE
iommufd: Have iopt_map_file_pages convert the fd to a file
iommufd: Have pfn_reader process DMABUF iopt_pages
iommufd: Allow MMIO pages in a batch
iommufd: Allow a DMABUF to be revoked
iommufd: Do not map/unmap revoked DMABUFs
iommufd: Add DMABUF to iopt_pages
vfio/pci: Add vfio_pci_dma_buf_iommufd_map()
|
|
Pull VFIO updates from Alex Williamson:
- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests (David Matlack)
- Fix comment typo in mtty driver (Chu Guangqing)
- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user (Longfang Liu)
- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver (Raghavendra Rao Ananta)
- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution (Jason Gunthorpe)
- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)
- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue
(Alex Williamson)
- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers (Alex Mastro)
- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset (Ankit Agrawal)
- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency (David Matlack)
* tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits)
vfio: selftests: Add vfio_pci_device_init_perf_test
vfio: selftests: Eliminate INVALID_IOVA
vfio: selftests: Split libvfio.h into separate header files
vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c
vfio: selftests: Rename vfio_util.h to libvfio.h
vfio: selftests: Stop passing device for IOMMU operations
vfio: selftests: Move IOVA allocator into iova_allocator.c
vfio: selftests: Move IOMMU library code into iommu.c
vfio: selftests: Rename struct vfio_dma_region to dma_region
vfio: selftests: Upgrade driver logging to dev_err()
vfio: selftests: Prefix logs with device BDF where relevant
vfio: selftests: Eliminate overly chatty logging
vfio: selftests: Support multiple devices in the same container/iommufd
vfio: selftests: Introduce struct iommu
vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode
vfio: selftests: Allow passing multiple BDFs on the command line
vfio: selftests: Split run.sh into separate scripts
vfio: selftests: Move run.sh into scripts directory
vfio/nvgrace-gpu: wait for the GPU mem to be ready
vfio/nvgrace-gpu: Inform devmem unmapped after reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (CXL) updates from Dave Jiang:
"The additions of note are adding CXL region remove support for locked
CXL decoders, adding unit testing support for XOR address translation,
and adding unit testing support for extended linear cache.
Misc:
- Remove incorrect page-allocator quirk section in documentation
- Remove unused devm_cxl_port_enumerate_dports() function
- Fix typo in cdat.c code comment
- Replace use of system_wq with system_percpu_wq
- Add locked CXL decoder support for region removal
- Return when generic target updated
- Rename region_res_match_cxl_range() to spa_maps_hpa()
- Clarify comment in spa_maps_hpa()
Enable unit testing for XOR address translation of SPA to DPA and vice versa:
- Refactor address translation funcs for testing in cxl_region
- Make the XOR calculations available for testing
- Add cxl_translate module for address translation testing in
cxl_test
Extended Linear Cache changes:
- Add extended linear cache size sysfs attribute
- Adjust failure emission of extended linear cache detection in
cxl_acpi
- Added extended linear cache unit testing support in cxl_test
Preparation refactor patches for PRM translation support:
- Simplify cxl_rd_ops allocation and handling
- Group xor arithmetric setup code in a single block
- Remove local variable @inc in cxl_port_setup_targets()"
* tag 'cxl-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (22 commits)
cxl/test: Assign overflow_err_count from log->nr_overflow
cxl/test: Remove ret_limit race condition in mock_get_event()
cxl/test: remove unused mock function for cxl_rcd_component_reg_phys()
cxl/test: Add support for acpi extended linear cache
cxl/test: Add cxl_test CFMWS support for extended linear cache
cxl/test: Standardize CXL auto region size
cxl/region: Remove local variable @inc in cxl_port_setup_targets()
cxl/acpi: Group xor arithmetric setup code in a single block
cxl: Simplify cxl_rd_ops allocation and handling
cxl: Clarify comment in spa_maps_hpa()
cxl: Rename region_res_match_cxl_range() to spa_maps_hpa()
acpi/hmat: Return when generic target is updated
cxl: Add handling of locked CXL decoder
cxl/region: Add support to indicate region has extended linear cache
cxl: Adjust extended linear cache failure emission in cxl_acpi
cxl/test: Add cxl_translate module for address translation testing
cxl/acpi: Make the XOR calculations available for testing
cxl/region: Refactor address translation funcs for testing
cxl/pci: replace use of system_wq with system_percpu_wq
cxl: fix typos in cdat.c comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Proper mapping of HID_GD_Z to ABS_DISTANCE for stylus/pen types of
devices (Ping Cheng)
- Power management/hibernation improvements in intel-ish (Zhang Lixu)
- Improved support for several Logitech devices, e.g. G Pro X
Superlight 2, new iteration of Lighspeed receiver, G13, G510 (Nathan
Rossi, Mavroudis Chatzilazaridis, Leo L Schwab, Hans de Goede)
- Support for UcLogic XP-PEN Artist 24 Pro (Joshua Goins)
- WinWing Orion2 throttle support improvement (Ivan Gorinov)
- other assorted small fixes and device ID additions
* tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (37 commits)
drivers: hid: renegotiate resolution multipliers with device after reset
HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226f
HID: logitech-dj: Fix probe failure when used with KVM
HID: logitech-dj: Remove duplicate error logging
HID: logitech-dj: Add support for G Pro X Superlight 2 receiver
selftests/hid-tablet: add ABS_DISTANCE test for stylus/pen
HID: input: map HID_GD_Z to ABS_DISTANCE for stylus/pen
HID: bpf: fix typo in HID usage table
HID: bpf: add the Huion Kamvas 27 Pro
HID: bpf: add heuristics to the Huion Inspiroy 2S eraser button
HID: bpf: Add support for XP-Pen Deco02
HID: bpf: Add support for the XP-Pen Deco 01 V3
HID: bpf: Add support for the Waltop Batteryless Tablet
HID: bpf: Add fixup for Logitech SpaceNavigator variants
HID: bpf: support for Huion Kamvas 16 Gen 3
HID: bpf: add support for Huion Kamvas 13 (Gen 3) (model GS1333)
HID: bpf: Add support for the Inspiroy 2M
Documentation: hid-alps: Format DataByte* subsection headings
Documentation: hid-alps: Fix packet format section headings
HID: nintendo: add WQ_PERCPU to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
Remove parentheses around assert statements in Python. With parentheses,
assert always evaluates to True, making the checks ineffective.
Signed-off-by: Maurice Hieronymus <mhi@mailbox.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Preparations to the use of nolibc in UML:
- Cleanup of sparse warnings
- Library mode without _start()
- More consistency when disabling errno
- Unconditional installation of all architecture support files
- Always 64-bit wide ino_t and off_t
- Various cleanups and bug fixes
* tag 'nolibc-20251130-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
selftests/nolibc: error out on linker warnings
selftests/nolibc: use lld to link loongarch binaries
tools/nolibc: remove more __nolibc_enosys() fallbacks
tools/nolibc: remove now superfluous overflow check in llseek
tools/nolibc: use 64-bit off_t
tools/nolibc: prefer the llseek syscall
tools/nolibc: handle 64-bit off_t for llseek
tools/nolibc: use 64-bit ino_t
tools/nolibc: avoid using plain integer as NULL pointer
tools/nolibc: add support for fchdir()
tools/nolibc: clean up outdated comments in generic arch.h
tools/nolibc: make the "headers" target install all supported archs
tools/nolibc: add the more portable inttypes.h
tools/nolibc: provide the portable sys/select.h
tools/nolibc: add missing memchr() to string.h
tools/nolibc: fix misleading help message regarding installation path
tools/nolibc: add uio.h with readv and writev
tools/nolibc: add option to disable runtime
tools/nolibc: use __fallthrough__ rather than fallthrough
tools/nolibc: implement %m if errno is not defined
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add Microsoft fan extensions support to the ACPI fan driver, fix
a bug in ACPICA, update other ACPI drivers (processor, time and alarm
device), update ACPI power management code and ACPI device properties
management, and fix an ACPI utility:
- Avoid walking the ACPI namespace in the AML interpreter if the
starting node cannot be determined (Cryolitia PukNgae)
- Use min() instead of min_t() in the ACPI device properties handling
code to avoid discarding significant bits (David Laight)
- Fix potential fwnode refcount leak in
acpi_fwnode_graph_parse_endpoint() that may prevent the parent
fwnode from being released (Haotian Zhang)
- Rework acpi_graph_get_next_endpoint() to use ACPI functions only,
remove unnecessary conditionals from it to make it easier to
follow, and make acpi_get_next_subnode() static (Sakari Ailus)
- Drop unused function acpi_get_lps0_constraint(), make some
Low-Power S0 callback functions for suspend-to-idle static, and
rearrange the code retrieving Low-Power S0 constraints so it only
runs when the constraints are actually used (Rafael Wysocki)
- Drop redundant locking from the ACPI battery driver (Rafael
Wysocki)
- Improve runtime PM in the ACPI time and alarm device (TAD) driver
using guard macros and rearrange code related to runtime PM in
acpi_tad_remove() (Rafael Wysocki)
- Add support for Microsoft fan extensions to the ACPI fan driver
along with notification support and work around a 64-bit firmware
bug in that driver (Armin Wolf)
- Use ACPI_FREE() to free ACPI buffer in the ACPI DPTF code
(Kaushlendra Kumar)
- Fix a memory leak and a resource leak in the ACPI pfrut utility
(Malaya Kumar Rout)
- Replace `core::mem::zeroed` with `pin_init::zeroed` in the ACPI
Rust code (Siyuan Huang)
- Update the ACPI code to use the new style of allocating workqueues
and new global workqueues (Marco Crivellari)
- Fix two spelling mistakes in the ACPI code (Chu Guangqing)
- Fix ISAPNP to generate uevents to auto-load modules (René Rebe)
- Relocate the state flags initialization in the ACPI processor idle
driver and drop redundant C-state count checks from it (Huisong Li)
- Fix map_x2apic_id() in the ACPI processor core driver for
amd-pstate on am4 (René Rebe)"
* tag 'acpi-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: PM: Fix a spelling mistake
ACPI: LPSS: Fix a spelling mistake
ACPI: processor_core: fix map_x2apic_id for amd-pstate on am4
ACPICA: Avoid walking the Namespace if start_node is NULL
ACPI: tools: pfrut: fix memory leak and resource leak in pfrut.c
ACPI: property: use min() instead of min_t()
PNP: Fix ISAPNP to generate uevents to auto-load modules
ACPI: property: Fix fwnode refcount leak in acpi_fwnode_graph_parse_endpoint()
ACPI: DPTF: Use ACPI_FREE() for ACPI buffer deallocation
ACPI: processor: idle: Drop redundant C-state count checks
ACPI: thermal: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: Add WQ_PERCPU to alloc_workqueue() users
ACPI: EC: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: replace use of system_wq with system_percpu_wq
ACPI: scan: replace use of system_unbound_wq with system_dfl_wq
ACPI: fan: Add support for Microsoft fan extensions
ACPI: fan: Add hwmon notification support
ACPI: fan: Add basic notification support
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Dave Hansen:
"The biggest thing of note here is Linear Address Space Separation
(LASS). It represents the first time I can think of that the
upper=>kernel/lower=>user address space convention is actually
recognized by the hardware on x86. It ensures that userspace can not
even get the hardware to _start_ page walks for the kernel address
space. This, of course, is a really nice generic side channel defense.
This is really only a down payment on LASS support. There are still
some details to work out in its interaction with EFI calls and
vsyscall emulation. For now, LASS is disabled if either of those
features is compiled in (which is almost always the case).
There's also one straggler commit in here which converts an
under-utilized AMD CPU feature leaf into a generic Linux-defined leaf
so more feature can be packed in there.
Summary:
- Enable Linear Address Space Separation (LASS)
- Change X86_FEATURE leaf 17 from an AMD leaf to Linux-defined"
* tag 'x86_cpu_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable LASS during CPU initialization
selftests/x86: Update the negative vsyscall tests to expect a #GP
x86/traps: Communicate a LASS violation in #GP message
x86/kexec: Disable LASS during relocate kernel
x86/alternatives: Disable LASS when patching kernel code
x86/asm: Introduce inline memcpy and memset
x86/cpu: Add an LASS dependency on SMAP
x86/cpufeatures: Enumerate the LASS feature bits
x86/cpufeatures: Make X86_FEATURE leaf 17 Linux-specific
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The mandatory pile of cleanups the cat drags in every merge window
* tag 'x86_cleanups_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Clean up whitespace in a20.c
x86/mm: Delete disabled debug code
x86/{boot,mtrr}: Remove unused function declarations
x86/percpu: Use BIT_WORD() and BIT_MASK() macros
x86/cpufeatures: Correct LKGS feature flag description
x86/idtentry: Add missing '*' to kernel-doc lines
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- SCA rework
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Prevent a thundering herd problem when the timekeeper CPU is delayed
and a large number of CPUs compete to acquire jiffies_lock to do the
update. Limit it to one CPU with a separate "uncontended" atomic
variable.
- A set of improvements for the timer migration mechanism:
- Support imbalanced NUMA trees correctly
- Support dynamic exclusion of CPUs from the migrator duty to allow
the cpuset/isolation mechanism to exclude them from handling
timers of remote idle CPUs
- The usual small updates, cleanups and enhancements
* tag 'timers-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Exclude isolated cpus from hierarchy
cpumask: Add initialiser to use cleanup helpers
sched/isolation: Force housekeeping if isolcpus and nohz_full don't leave any
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
timers/migration: Use scoped_guard on available flag set/clear
timers/migration: Add mask for CPUs available in the hierarchy
timers/migration: Rename 'online' bit to 'available'
selftests/timers/nanosleep: Add tests for return of remaining time
selftests/timers: Clean up kernel version check in posix_timers
time: Fix a few typos in time[r] related code comments
time: tick-oneshot: Add missing Return and parameter descriptions to kernel-doc
hrtimer: Store time as ktime_t in restart block
timers/migration: Remove dead code handling idle CPU checking for remote timers
timers/migration: Remove unused "cpu" parameter from tmigr_get_group()
timers/migration: Assert that hotplug preparing CPU is part of stable active hierarchy
timers/migration: Fix imbalanced NUMA trees
timers/migration: Remove locking on group connection
timers/migration: Convert "while" loops to use "for"
tick/sched: Limit non-timekeeper CPUs calling jiffies update
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.19
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
|
|
KVM/riscv changes for 6.19
- SBI MPXY support for KVM guest
- New KVM_EXIT_FAIL_ENTRY_NO_VSFILE for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support enabling dirty log gradually in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.19
1. Get VM PMU capability from HW GCFG register.
2. Add AVEC basic support.
3. Use 64-bit register definition for EIOINTC.
4. Add KVM timer test cases for tools/selftests.
|
|
Add tests that trigger packet drops in cake_enqueue(): "CAKE with QFQ
Parent - CAKE enqueue with packets dropping". It forces CAKE_enqueue to
return NET_XMIT_CN after dropping the packets when it has a QFQ parent.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251128001415.377823-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
Currently, tolerance is computed against the TC’s expected percentage,
making TC3 (20%) validation overly strict and TC4 (80%) overly loose.
Update BandwidthValidator to take a dict of shares and compute bounds
relative to the overall total, so that all shares are validated
consistently.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-7-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the documented bandwidth distribution between TC3 and TC4
from 80/20 to 20/80. Update test descriptions and printed messages
to consistently reflect the intended split.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-6-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the inline iperf3 subprocess and JSON parsing with
Iperf3Runner.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-4-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes devlink_rate_tc_bw.py present in the Makefile under the same
directory.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-2-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This removes some noise that can be distracting while looking at
selftests by redirecting socat stderr to /dev/null.
Before this commit, netcons_basic would output:
Running with target mode: basic (ipv6)
2025/11/29 12:08:03 socat[259] W exiting on signal 15
2025/11/29 12:08:03 socat[271] W exiting on signal 15
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
2025/11/29 12:08:05 socat[329] W exiting on signal 15
2025/11/29 12:08:05 socat[322] W exiting on signal 15
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[380] W exiting on signal 15
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
2025/11/29 12:08:10 socat[440] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
extended : ipv4 : Test passed
After these changes, output looks like:
Running with target mode: basic (ipv6)
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
extended : ipv4 : Test passed
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New NIPA installation had been reporting a few flaky tests.
arp_ndisc_evict_nocarrier is most flaky of them all.
I suspect that the flakiness is due to udev swapping the MAC
addresses on the interfaces. Extend the message in
arp_ndisc_evict_nocarrier to hint at this potential issue.
Having the neigh get fail right after ping is rather unusual,
unless udev changes the MAC addr causing a flush in the meantime.
Link: https://patch.msgid.link/20251127194556.2409574-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
