Merge tag 'soc-arm-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC ARM code updates from Arnd Bergmann:
 "These are very minimal changes for 32-bit Arm platform code, enabling
  SMP bringup for one more SoC variant (mt6582) among spelling changes
  and a build warning fix"

* tag 'soc-arm-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: omap1: avoid symbol clashes in fiq handler
  ARM: gemini: fix typos in comments
  ARM: versatile: Fix typo in versatile.c
  ARM: OMAP2+: Fix falg->flag typo in omap_smc2()
  ARM: mediatek: add MT6582 smp bring up code
  ARM: mediatek: add board_dt_compat entry for the MT6582 SoC

8 files changed, 29 insertions, 23 deletions

diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
index fbafe7475c02..2bba617e4d54 100644
--- a/arch/arm/mach-gemini/board-dt.c
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -34,7 +34,7 @@ static void gemini_idle(void)
 {
 	/*
 	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
+	 * will never wakeup... Actually it is not very good to enable
 	 * interrupts first since scheduler can miss a tick, but there is
 	 * no other way around this. Platforms that needs it for power saving
 	 * should enable it in init code, since by default it is
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 638eabad2dd3..64ec487c13ab 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -19,6 +19,10 @@ config MACH_MT6572
 	bool "MediaTek MT6572 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT6582
+	bool "MediaTek MT6582 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index 5c28124bd007..fd3a8834fc4f 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -39,6 +39,7 @@ static void __init mediatek_timer_init(void)
 static const char * const mediatek_board_dt_compat[] = {
 	"mediatek,mt2701",
 	"mediatek,mt6572",
+	"mediatek,mt6582",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
 	"mediatek,mt7623",
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index bbd26d423bde..6b0943d95555 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -56,6 +56,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
 	{ .compatible   = "mediatek,mt6572", .data = &mtk_mt6572_boot },
+	{ .compatible   = "mediatek,mt6582", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt7629", .data = &mtk_mt7623_boot },
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 35c2f9574dbd..5cf6fcca602c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -97,7 +97,7 @@ ENTRY(qwerty_fiqin_start)
 
 	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
 	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ none - spurious FIQ? exit
+	beq .Lexit				@ none - spurious FIQ? exit
 
 	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
 
@@ -105,25 +105,25 @@ ENTRY(qwerty_fiqin_start)
 	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
 
 	cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY)	@ is it GPIO interrupt?
-	beq gpio				@ yes - process it
+	beq .Lgpio				@ yes - process it
 
 	mov r8, #1
 	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
 	str r8, [r12, #IRQ_MIR_REG_OFFSET]
-exit:
+.Lexit:
 	subs	pc, lr, #4			@ return from FIQ
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@
-gpio:	@ GPIO bank interrupt handler
+.Lgpio:	@ GPIO bank interrupt handler
 	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
 
 	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
-restart:
+.Lrestart:
 	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
 	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ no - spurious interrupt? exit
+	beq .Lexit				@ no - spurious interrupt? exit
 
 	orr r11, r11, r13			@ mask all requested interrupts
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
@@ -131,7 +131,7 @@ restart:
 	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
 
 	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
-	beq hksw				@ no - try next source
+	beq .Lhksw				@ no - try next source
 
 
 	@@@@@@@@@@@@@@@@@@@@@@
@@ -145,10 +145,10 @@ restart:
 
 	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
 	cmp r10, #0				@ are we expecting start bit?
-	bne data				@ no - go to data processing
+	bne .Ldata				@ no - go to data processing
 
 	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
-	beq hksw				@ no - try next source
+	beq .Lhksw				@ no - try next source
 
 	@ r8 contains KEYBRD_DATA_MASK, use it
 	str r8, [r9, #BUF_STATE]		@ enter data processing state
@@ -162,9 +162,9 @@ restart:
 	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
 
-	b restart				@ restart
+	b .Lrestart				@ restart
 
-data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+.Ldata:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 
 	@ r8 still contains GPIO input bits
 	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
@@ -175,7 +175,7 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	mov r10, r10, lsl #1			@ shift mask left
 	bics r10, r10, #0x800			@ have we got all the bits?
 	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
-	bne restart				@ and restart
+	bne .Lrestart				@ and restart
 
 	@ r10 already contains 0, reuse it
 	str r10, [r9, #BUF_STATE]		@ reset state to start
@@ -189,7 +189,7 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
 	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
 	cmp r10, r8				@ is buffer full?
-	beq hksw				@ yes - key lost, next source
+	beq .Lhksw				@ yes - key lost, next source
 
 	add r10, r10, #1			@ incremet keystrokes counter
 	str r10, [r9, #BUF_KEYS_CNT]
@@ -213,9 +213,9 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-hksw:	@Is hook switch interrupt requested?
+.Lhksw:	@Is hook switch interrupt requested?
 	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
-	beq mdm					@ no - try next source
+	beq .Lmdm				@ no - try next source
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@
@@ -230,9 +230,9 @@ hksw:	@Is hook switch interrupt requested?
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-mdm:	@Is it a modem interrupt?
+.Lmdm:	@Is it a modem interrupt?
 	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
-	beq irq					@ no - check for next interrupt
+	beq .Lirq				@ no - check for next interrupt
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@
@@ -245,13 +245,13 @@ mdm:	@Is it a modem interrupt?
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-irq:	@ Place deferred_fiq interrupt request
+.Lirq:	@ Place deferred_fiq interrupt request
 	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
 	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
 	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
 
 	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
-	b restart				@ check for next GPIO interrupt
+	b .Lrestart				@ check for next GPIO interrupt
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
 
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 2517c4a5a0e2..04b4ba0f59ab 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -68,7 +68,7 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern void omap_smccc_smc(u32 fn, u32 arg);
 extern void omap_smc1(u32 fn, u32 arg);
-extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern u32 omap_smc2(u32 id, u32 flag, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern int omap_secure_ram_reserve_memblock(void);
 extern u32 save_secure_ram_context(u32 args_pa);
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index 7376f528034d..fe3b5478200a 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -32,7 +32,7 @@ ENTRY(_omap_smc1)
 ENDPROC(_omap_smc1)
 
 /**
- * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
+ * u32 omap_smc2(u32 id, u32 flag, u32 pargs)
  * Low level common routine for secure HAL and PPA APIs.
  * @id: Application ID of HAL APIs
  * @flag: Flag to indicate the criticality of operation
diff --git a/arch/arm/mach-versatile/versatile.c b/arch/arm/mach-versatile/versatile.c
index 7ef03d0c224d..f0c80d4663ca 100644
--- a/arch/arm/mach-versatile/versatile.c
+++ b/arch/arm/mach-versatile/versatile.c
@@ -134,7 +134,7 @@ static void __init versatile_dt_pci_init(void)
 	val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
 	if (val & 1) {
 		/*
-		 * Enable PCI accesses. Note that the documentaton is
+		 * Enable PCI accesses. Note that the documentation is
 		 * inconsistent whether or not this is needed, but the old
 		 * driver had it so we will keep it.
 		 */