Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "There's one new driver, lots of various updates to existing ones, some
  refactoring support for new models and misc tweaks and fixes.

  The biggest new feature in GPIO core is adding support for managed,
  enable-counted sharing of GPIO pins, something that - until now - was
  only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
  which basically allowed drivers to "fight it out" for the descriptor
  and provided no synchronization. It was enabled on Qualcomm platforms
  (and thus is enabled on arm64 defconfig) and I plan on removing
  GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
  the new mechanism.

  GPIO core:
   - add proper support for shared GPIOs that's aiming to replace the
     current sharing mechanism (which provides no synchronization ot
     enable counting) and enable it for Qualcomm platforms
   - improve the software node GPIO lookup by using the fwnode
     representation instead of the software node's name which was prone
     to bugs (GPIO controllers don't have to use the software node's
     name as their kernel label)
   - remove the last user of legacy-of-mm-gpiochip.h and drop the header
   - move closer to removing the legacy gpio_request_one() routine
   - rename some symbols for consistency
   - shrink GPIO printk() helpers by reusing existing code
   - remove some redundant kernel messages
   - use min() instead of min_t() in GPIO ACPI code
   - use system_percpu_wq instead of system_wq in GPIO character device
     code

  New drivers:
   - add a driver for the QIXIS FPGA GPIO controller

  Driver improvements:
   - use modernized variants of power management macros across a wide
     array of drivers in order to avoid having to use the __maybe_unused
     attribute
   - convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
     instead of the platform bus as they are not really described in
     firmware
   - use lock guards and update symbol prefixes in gpio-mmio
   - support the bryx radio interface kit in gpio-mpsse + refactor the
     driver
   - use software nodes for configuring the reset-gpio driver, including
     setting up the reference to the shared "reset" pin
   - check and propagate the return value of gpiod_set_value() to
     user-space in gpio-virtuser (this was previously not possible as
     this function returned void)
   - extend the gpio-regmap helper with more features (bypass cache for
     aliased inputs, force writes for aliased data registers, add a new
     configuration parameter)
   - remove unneeded includes from gpio-aspeed and gpio-latch
   - add support for Tegra410 to gpio-tegra186
   - replace PCI-specific PM with generic device-level PM in gpio-bt8xx
   - use dynamic GPIO range allocation in gpio-loongson-64bit
   - improve handling of level-triggered interrupts in gpio-pca953x
   - add suspend/resume support to gpio-fxl6408
   - add support for more models to gpio-menz127
   - optimize gpio-mvebu interrupt handling by avoiding unnecessary
     calls to mvebu_gpio_irq_handler()
   - make locking more consistent in gpio-grgpio

  Device-tree bindings:
   - document new NXP and Microchip models

  Documentation:
   - add a comprehensive compatibility and feature list for
     gpio-pca953x, which is a great addition as it's probably the most
     commonly used GPIO expander driver
   - kernel-doc tweaks

  Late fixes:
   - use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"

* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
  gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
  gpio: regmap: fix kernel-doc notation
  gpio: shared: fix a deadlock
  gpio: shared-proxy: set suppress_bind_attrs
  gpio: shared: ignore GPIO hogs when traversing the device tree
  gpio: shared: ignore special __symbols__ node when traversing device tree
  gpio: shared: handle the reset-gpios corner case
  gpio: zynq: Use modern PM macros
  gpio: xilinx: Use modern PM macros
  gpio: xgene: Use modern PM macros
  gpio: uniphier: Use modern PM macros
  gpio: tqmx86: Use modern PM macros
  gpio: pch: Use modern PM macros
  gpio: omap: Use modern PM macros
  gpio: msc313: Use modern PM macros
  gpio: mlxbf2: Use modern PM macros
  gpio: ml-ioh: Use modern PM macros
  gpio: pl061: Use modern PM macros
  gpio: htc-egpio: Use modern PM macros
  gpio: brcmstb: Use modern PM macros
  ...

4 files changed, 559 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
index d78da7dd2a56..184432d24ea1 100644
--- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -11,7 +11,10 @@ maintainers:
 
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - const: microchip,pic64gx-gpio
+          - const: microchip,mpfs-gpio
       - enum:
           - microchip,mpfs-gpio
           - microchip,coregpio-rtl-v3
diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
index c994177de940..3f4bbd57fc52 100644
--- a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
@@ -22,6 +22,8 @@ properties:
           - cznic,moxtet-gpio
           - dlg,slg7xl45106
           - fcs,fxl6408
+          - fsl,ls1046aqds-fpga-gpio-stat-pres2
+          - fsl,lx2160ardb-fpga-gpio-sfp
           - gateworks,pld-gpio
           - ibm,ppc4xx-gpio
           - loongson,ls1x-gpio
diff --git a/Documentation/driver-api/gpio/index.rst b/Documentation/driver-api/gpio/index.rst
index 87929840e85a..bee58f709b9a 100644
--- a/Documentation/driver-api/gpio/index.rst
+++ b/Documentation/driver-api/gpio/index.rst
@@ -15,6 +15,7 @@ Contents:
    legacy-boards
    drivers-on-gpio
    bt8xxgpio
+   pca953x
 
 Core
 ====
diff --git a/Documentation/driver-api/gpio/pca953x.rst b/Documentation/driver-api/gpio/pca953x.rst
new file mode 100644
index 000000000000..4bd7cf1120cb
--- /dev/null
+++ b/Documentation/driver-api/gpio/pca953x.rst
@@ -0,0 +1,552 @@
+============================================
+PCA953x I²C GPIO expander compatibility list
+============================================
+
+:Author: Levente Révész <levente.revesz@eilabs.com>
+
+I went through all the datasheets and created this note listing
+chip functions and register layouts.
+
+Overview of chips
+=================
+
+Chips with the basic 4 registers
+--------------------------------
+
+These chips have 4 register banks: input, output, invert and direction.
+Each of these banks contains (lines/8) registers, one for each GPIO port.
+
+Banks offset is always a power of 2:
+
+- 4 lines  -> bank offset is 1
+- 8 lines  -> bank offset is 1
+- 16 lines -> bank offset is 2
+- 24 lines -> bank offset is 4
+- 32 lines -> bank offset is 4
+- 40 lines -> bank offset is 8
+
+For example, register layout of GPIO expander with 24 lines:
+
++------+-----------------+--------+
+| addr | function        | bank   |
++======+=================+========+
+|  00  | input port0     |        |
++------+-----------------+        |
+|  01  | input port1     | bank 0 |
++------+-----------------+        |
+|  02  | input port2     |        |
++------+-----------------+--------+
+|  03  | n/a             |        |
++------+-----------------+--------+
+|  04  | output port0    |        |
++------+-----------------+        |
+|  05  | output port1    | bank 1 |
++------+-----------------+        |
+|  06  | output port2    |        |
++------+-----------------+--------+
+|  07  | n/a             |        |
++------+-----------------+--------+
+|  08  | invert port0    |        |
++------+-----------------+        |
+|  09  | invert port1    | bank 2 |
++------+-----------------+        |
+|  0A  | invert port2    |        |
++------+-----------------+--------+
+|  0B  | n/a             |        |
++------+-----------------+--------+
+|  0C  | direction port0 |        |
++------+-----------------+        |
+|  0D  | direction port1 | bank 3 |
++------+-----------------+        |
+|  0E  | direction port2 |        |
++------+-----------------+--------+
+|  0F  | n/a             |        |
++------+-----------------+--------+
+
+.. note::
+     This is followed by all supported chips, except by pcal6534.
+
+The table below shows the offsets for each of the compatible chips:
+
+========== ===== ========= ===== ====== ====== =========
+compatible lines interrupt input output invert direction
+========== ===== ========= ===== ====== ====== =========
+pca9536        4        no    00     01     02        03
+pca9537        4       yes    00     01     02        03
+pca6408        8       yes    00     01     02        03
+tca6408        8       yes    00     01     02        03
+pca9534        8       yes    00     01     02        03
+pca9538        8       yes    00     01     02        03
+pca9554        8       yes    00     01     02        03
+tca9554        8       yes    00     01     02        03
+pca9556        8        no    00     01     02        03
+pca9557        8        no    00     01     02        03
+pca6107        8       yes    00     01     02        03
+pca6416       16       yes    00     02     04        06
+tca6416       16       yes    00     02     04        06
+pca9535       16       yes    00     02     04        06
+pca9539       16       yes    00     02     04        06
+tca9539       16       yes    00     02     04        06
+pca9555       16       yes    00     02     04        06
+max7318       16       yes    00     02     04        06
+tca6424       24       yes    00     04     08        0C
+========== ===== ========= ===== ====== ====== =========
+
+Chips with additional timeout_en register
+-----------------------------------------
+
+These Maxim chips have a bus timeout function which can be enabled in
+the timeout_en register. This is present in only two chips. Defaults to
+timeout disabled.
+
+========== ===== ========= ===== ====== ====== ========= ==========
+compatible lines interrupt input output invert direction timeout_en
+========== ===== ========= ===== ====== ====== ========= ==========
+max7310        8        no    00     01     02        03         04
+max7312       16       yes    00     02     04        06         08
+========== ===== ========= ===== ====== ====== ========= ==========
+
+Chips with additional int_mask register
+---------------------------------------
+
+These chips have an interrupt mask register in addition to the 4 basic
+registers. The interrupt masks default to all interrupts disabled. To
+use interrupts with these chips, the driver has to set the int_mask
+register.
+
+========== ===== ========= ===== ====== ====== ========= ========
+compatible lines interrupt input output invert direction int_mask
+========== ===== ========= ===== ====== ====== ========= ========
+pca9505       40       yes    00     08     10        18       20
+pca9506       40       yes    00     08     10        18       20
+========== ===== ========= ===== ====== ====== ========= ========
+
+Chips with additional int_mask and out_conf registers
+-----------------------------------------------------
+
+This chip has an interrupt mask register, and an output port
+configuration register, which can select between push-pull and
+open-drain modes. Each bit controls two lines. Both of these registers
+are present in PCAL chips as well, albeit the out_conf works
+differently.
+
+========== ===== ========= ===== ====== ====== ========= ======== ========
+compatible lines interrupt input output invert direction int_mask out_conf
+========== ===== ========= ===== ====== ====== ========= ======== ========
+pca9698       40       yes    00     08     10        18       20       28
+========== ===== ========= ===== ====== ====== ========= ======== ========
+
+pca9698 also has a "master output" register for setting all outputs per
+port to the same value simultaneously, and a chip specific mode register
+for various additional chip settings.
+
+========== ============= ====
+compatible master_output mode
+========== ============= ====
+pca9698               29   2A
+========== ============= ====
+
+Chips with LED blink and intensity control
+------------------------------------------
+
+These Maxim chips have no invert register.
+
+They have two sets of output registers (output0 and output1). An internal
+timer alternates the effective output between the values set in these
+registers, if blink mode is enabled in the blink register. The
+master_intensity register and the intensity registers together define
+the PWM intensity value for each pair of outputs.
+
+These chips can be used as simple GPIO expanders if the driver handles the
+input, output0 and direction registers.
+
+========== ===== ========= ===== ======= ========= ======= ================ ===== =========
+compatible lines interrupt input output0 direction output1 master_intensity blink intensity
+========== ===== ========= ===== ======= ========= ======= ================ ===== =========
+max7315        8       yes    00      01        03      09               0E    0F        10
+max7313       16       yes    00      02        06      0A               0E    0F        10
+========== ===== ========= ===== ======= ========= ======= ================ ===== =========
+
+Basic PCAL chips
+----------------
+
+========== ===== ========= ===== ====== ====== =========
+compatible lines interrupt input output invert direction
+========== ===== ========= ===== ====== ====== =========
+pcal6408       8       yes    00     01     02        03
+pcal9554b      8       yes    00     01     02        03
+pcal6416      16       yes    00     02     04        06
+pcal9535      16       yes    00     02     04        06
+pcal9555a     16       yes    00     02     04        06
+========== ===== ========= ===== ====== ====== =========
+
+These chips have several additional features:
+
+    1. output drive strength setting (out_strength)
+    2. input latch (in_latch)
+    3. pull-up/pull-down (pull_in, pull_sel)
+    4. push-pull/open-drain outputs (out_conf)
+    5. interrupt mask and interrupt status (int_mask, int_status)
+
+========== ============ ======== ======= ======== ======== ========== ========
+compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf
+========== ============ ======== ======= ======== ======== ========== ========
+pcal6408             40       42      43       44       45         46       4F
+pcal9554b            40       42      43       44       45         46       4F
+pcal6416             40       44      46       48       4A         4C       4F
+pcal9535             40       44      46       48       4A         4C       4F
+pcal9555a            40       44      46       48       4A         4C       4F
+========== ============ ======== ======= ======== ======== ========== ========
+
+Currently the driver has support for the input latch, pull-up/pull-down
+and uses int_mask and int_status for interrupts.
+
+PCAL chips with extended interrupt and output configuration functions
+---------------------------------------------------------------------
+
+========== ===== ========= ===== ====== ====== =========
+compatible lines interrupt input output invert direction
+========== ===== ========= ===== ====== ====== =========
+pcal6524      24       yes    00     04     08        0C
+pcal6534      34       yes    00     05     0A        0F
+========== ===== ========= ===== ====== ====== =========
+
+These chips have the full PCAL register set, plus the following functions:
+
+    1. interrupt event selection: level, rising, falling, any edge
+    2. clear interrupt status per line
+    3. read input without clearing interrupt status
+    4. individual output config (push-pull/open-drain) per output line
+    5. debounce inputs
+
+========== ============ ======== ======= ======== ======== ========== ========
+compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf
+========== ============ ======== ======= ======== ======== ========== ========
+pcal6524             40       48      4C       50       54       58         5C
+pcal6534             30       3A      3F       44       49       4E         53
+========== ============ ======== ======= ======== ======== ========== ========
+
+========== ======== ========= ============ ============== ======== ==============
+compatible int_edge int_clear input_status indiv_out_conf debounce debounce_count
+========== ======== ========= ============ ============== ======== ==============
+pcal6524         60        68           6C             70       74             76
+pcal6534         54        5E           63             68       6D             6F
+========== ======== ========= ============ ============== ======== ==============
+
+As can be seen in the table above, pcal6534 does not follow the usual
+bank spacing rule. Its banks are closely packed instead.
+
+PCA957X chips with a completely different register layout
+---------------------------------------------------------
+
+These chips have the basic 4 registers, but at unusual addresses.
+
+Additionally, they have:
+
+    1. pull-up/pull-down (pull_sel)
+    2. a global pull enable, defaults to disabled (config)
+    3. interrupt mask, interrupt status (int_mask, int_status)
+
+========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ==========
+compatible lines interrupt input invert config pull_sel direction output int_mask int_status
+========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ==========
+pca9574        8       yes    00     01     02       03        04     05       06         07
+pca9575       16       yes    00     02     04       06        08     0A       0C         0E
+========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ==========
+
+Currently the driver supports none of the advanced features.
+
+XRA1202
+-------
+
+Basic 4 registers, plus advanced features:
+
+    1. interrupt mask, defaults to interrupts disabled
+    2. interrupt status
+    3. interrupt event selection, level, rising, falling, any edge
+       (int_mask, rising_mask, falling_mask)
+    4. pull-up (no pull-down)
+    5. tri-state
+    6. debounce
+
+========== ===== ========= ===== ====== ====== ========= =========
+compatible lines interrupt input output invert direction pullup_en
+========== ===== ========= ===== ====== ====== ========= =========
+xra1202        8       yes    00     01     02        03        04
+========== ===== ========= ===== ====== ====== ========= =========
+
+========== ======== ======== ========== =========== ============ ========
+compatible int_mask tristate int_status rising_mask falling_mask debounce
+========== ======== ======== ========== =========== ============ ========
+xra1202          05       06         07          08           09       0A
+========== ======== ======== ========== =========== ============ ========
+
+Overview of functions
+=====================
+
+This section lists chip functions that are supported by the driver
+already, or are at least common in multiple chips.
+
+Input, Output, Invert, Direction
+--------------------------------
+
+The basic 4 GPIO functions are present in all but one chip category, i.e.
+`Chips with LED blink and intensity control`_ are missing the invert
+register.
+
+3 different layouts are used for these registers:
+
+    1. banks 0, 1, 2, 3 with bank offsets of 2^n
+        - all other chips
+
+    2. banks 0, 1, 2, 3 with closely packed banks
+        - pcal6534
+
+    3. banks 0, 5, 1, 4 with bank offsets of 2^n
+        - pca9574
+        - pca9575
+
+Interrupts
+----------
+
+Only an interrupt mask register
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The same layout is used for all of these:
+
+    1. bank 5 with bank offsets of 2^n
+        - pca9505
+        - pca9506
+        - pca9698
+
+Interrupt mask and interrupt status registers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+These work the same way in all of the chips: mask and status have
+one bit per line, 1 in the mask means interrupt enabled.
+
+Layouts:
+
+    1. base offset 0x40, bank 5 and bank 6, bank offsets of 2^n
+        - pcal6408
+        - pcal6416
+        - pcal9535
+        - pcal9554b
+        - pcal9555a
+        - pcal6524
+
+    2. base offset 0x30, bank 5 and 6, closely packed banks
+        - pcal6534
+
+    3. bank 6 and 7, bank offsets of 2^n
+        - pca9574
+        - pca9575
+
+    4. bank 5 and 7, bank offsets of 2^n
+        - xra1202
+
+Interrupt on specific edges
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+`PCAL chips with extended interrupt and output configuration functions`_
+have an int_edge register. This contains 2 bits per line, one of 4 events
+can be selected for each line:
+
+    0: level, 1: rising edge, 2: falling edge, 3: any edge
+
+Layouts:
+
+    1. base offset 0x40, bank 7, bank offsets of 2^n
+
+        - pcal6524
+
+    2. base offset 0x30, bank 7 + offset 0x01, closely packed banks
+       (out_conf is 1 byte, not (lines/8) bytes, hence the 0x01 offset)
+
+        - pcal6534
+
+`XRA1202`_ chips have a different mechanism for the same thing: they have
+a rising mask and a falling mask, with one bit per line.
+
+Layout:
+
+    1. bank 5, bank offsets of 2^n
+
+Input latch
+-----------
+
+Only `Basic PCAL chips`_ and
+`PCAL chips with extended interrupt and output configuration functions`_
+have this function. When the latch is enabled, the interrupt is not cleared
+until the input port is read. When the latch is disabled, the interrupt
+is cleared even if the input register is not read, if the input pin returns
+to the logic value it had before generating the interrupt. Defaults to latch
+disabled.
+
+Currently the driver enables the latch for each line with interrupt
+enabled.
+
+    1. base offset 0x40, bank 2, bank offsets of 2^n
+        - pcal6408
+        - pcal6416
+        - pcal9535
+        - pcal9554b
+        - pcal9555a
+        - pcal6524
+
+    2. base offset 0x30, bank 2, closely packed banks
+        - pcal6534
+
+Pull-up and pull-down
+---------------------
+
+`Basic PCAL chips`_ and
+`PCAL chips with extended interrupt and output configuration functions`_
+use the same mechanism: their pull_en register enables the pull-up or pull-down
+function, and their pull_sel register chooses the direction. They all use one
+bit per line.
+
+    0: pull-down, 1: pull-up
+
+Layouts:
+
+    1. base offset 0x40, bank 3 (en) and 4 (sel), bank offsets of 2^n
+        - pcal6408
+        - pcal6416
+        - pcal9535
+        - pcal9554b
+        - pcal9555a
+        - pcal6524
+
+    2. base offset 0x30, bank 3 (en) and 4 (sel), closely packed banks
+        - pcal6534
+
+`PCA957X chips with a completely different register layout`_ have a pull_sel
+register with one bit per line, and a global pull_en bit in their config
+register.
+
+Layout:
+
+    1. bank 2 (config), bank 3 (sel), bank offsets of 2^n
+        - pca9574
+        - pca9575
+
+`XRA1202`_ chips can only pull-up. They have a pullup_en register.
+
+Layout:
+
+    1. bank 4, bank offsets of 2^n
+        - xra1202
+
+Push-pull and open-drain
+------------------------
+
+`Chips with additional int_mask and out_conf registers`_ have this function,
+but only for select IO ports. Register has 1 bit per 2 lines. In pca9698,
+only port0 and port1 have this function.
+
+    0: open-drain, 1: push-pull
+
+Layout:
+
+    1. base offset 5*bankoffset
+        - pca9698
+
+`Basic PCAL chips`_ have 1 bit per port in one single out_conf register.
+Only whole ports can be configured.
+
+    0: push-pull, 1: open-drain
+
+Layout:
+
+    1. base offset 0x4F
+        - pcal6408
+        - pcal6416
+        - pcal9535
+        - pcal9554b
+        - pcal9555a
+
+`PCAL chips with extended interrupt and output configuration functions`_
+can set this for each line individually. They have the same per-port out_conf
+register as `Basic PCAL chips`_, but they also have an indiv_out_conf register
+with one bit per line, which inverts the effect of the port-wise setting.
+
+    0: push-pull, 1: open-drain
+
+Layouts:
+
+    1. base offset 0x40 + 7*bankoffset (out_conf),
+       base offset 0x60, bank 4 (indiv_out_conf) with bank offset of 2^n
+
+        - pcal6524
+
+    2. base offset 0x30 + 7*banksize (out_conf),
+       base offset 0x54, bank 4 (indiv_out_conf), closely packed banks
+
+        - pcal6534
+
+This function is currently not supported by the driver.
+
+Output drive strength
+---------------------
+
+Only PCAL chips have this function. 2 bits per line.
+
+==== ==============
+bits drive strength
+==== ==============
+  00          0.25x
+  01          0.50x
+  10          0.75x
+  11          1.00x
+==== ==============
+
+    1. base offset 0x40, bank 0 and 1, bank offsets of 2^n
+        - pcal6408
+        - pcal6416
+        - pcal9535
+        - pcal9554b
+        - pcal9555a
+        - pcal6524
+
+    2. base offset 0x30, bank 0 and 1, closely packed banks
+        - pcal6534
+
+Currently not supported by the driver.
+
+Datasheets
+==========
+
+- MAX7310: https://datasheets.maximintegrated.com/en/ds/MAX7310.pdf
+- MAX7312: https://datasheets.maximintegrated.com/en/ds/MAX7312.pdf
+- MAX7313: https://datasheets.maximintegrated.com/en/ds/MAX7313.pdf
+- MAX7315: https://datasheets.maximintegrated.com/en/ds/MAX7315.pdf
+- MAX7318: https://datasheets.maximintegrated.com/en/ds/MAX7318.pdf
+- PCA6107: https://pdf1.alldatasheet.com/datasheet-pdf/view/161780/TI/PCA6107.html
+- PCA6408A: https://www.nxp.com/docs/en/data-sheet/PCA6408A.pdf
+- PCA6416A: https://www.nxp.com/docs/en/data-sheet/PCA6416A.pdf
+- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf
+- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf
+- PCA9534: https://www.nxp.com/docs/en/data-sheet/PCA9534.pdf
+- PCA9535: https://www.nxp.com/docs/en/data-sheet/PCA9535_PCA9535C.pdf
+- PCA9536: https://www.nxp.com/docs/en/data-sheet/PCA9536.pdf
+- PCA9537: https://www.nxp.com/docs/en/data-sheet/PCA9537.pdf
+- PCA9538: https://www.nxp.com/docs/en/data-sheet/PCA9538.pdf
+- PCA9539: https://www.nxp.com/docs/en/data-sheet/PCA9539_PCA9539R.pdf
+- PCA9554: https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
+- PCA9555: https://www.nxp.com/docs/en/data-sheet/PCA9555.pdf
+- PCA9556: https://www.nxp.com/docs/en/data-sheet/PCA9556.pdf
+- PCA9557: https://www.nxp.com/docs/en/data-sheet/PCA9557.pdf
+- PCA9574: https://www.nxp.com/docs/en/data-sheet/PCA9574.pdf
+- PCA9575: https://www.nxp.com/docs/en/data-sheet/PCA9575.pdf
+- PCA9698: https://www.nxp.com/docs/en/data-sheet/PCA9698.pdf
+- PCAL6408A: https://www.nxp.com/docs/en/data-sheet/PCAL6408A.pdf
+- PCAL6416A: https://www.nxp.com/docs/en/data-sheet/PCAL6416A.pdf
+- PCAL6524: https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf
+- PCAL6534: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf
+- PCAL9535A: https://www.nxp.com/docs/en/data-sheet/PCAL9535A.pdf
+- PCAL9554B: https://www.nxp.com/docs/en/data-sheet/PCAL9554B_PCAL9554C.pdf
+- PCAL9555A: https://www.nxp.com/docs/en/data-sheet/PCAL9555A.pdf
+- TCA6408A: https://www.ti.com/lit/gpn/tca6408a
+- TCA6416: https://www.ti.com/lit/gpn/tca6416
+- TCA6424: https://www.ti.com/lit/gpn/tca6424
+- TCA9539: https://www.ti.com/lit/gpn/tca9539
+- TCA9554: https://www.ti.com/lit/gpn/tca9554
+- XRA1202: https://assets.maxlinear.com/web/documents/xra1202_1202p_101_042213.pdf