Merge branch 'pci/controller/mediatek'

- Convert DT binding to YAML schema (Christian Marangi)

- Add Airoha AN7583 DT compatible and driver support (Christian Marangi)

* pci/controller/mediatek:
  PCI: mediatek: Add support for Airoha AN7583 SoC
  PCI: mediatek: Use generic MACRO for TPVPERL delay
  PCI: mediatek: Convert bool to single quirks entry and bitmap
  dt-bindings: PCI: mediatek: Add support for Airoha AN7583
  dt-bindings: PCI: mediatek: Convert to YAML schema

3 files changed, 602 insertions, 289 deletions

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml
new file mode 100644
index 000000000000..e33bcc216e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-mt7623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pcie
+      - mediatek,mt7623-pcie
+
+  reg:
+    minItems: 4
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: subsys
+      - const: port0
+      - const: port1
+      - const: port2
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: free_ck
+      - const: sys_ck0
+      - const: sys_ck1
+      - const: sys_ck2
+
+  resets:
+    minItems: 3
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: pcie-rst0
+      - const: pcie-rst1
+      - const: pcie-rst2
+
+  phys:
+    minItems: 3
+    maxItems: 3
+
+  phy-names:
+    items:
+      - const: pcie-phy0
+      - const: pcie-phy1
+      - const: pcie-phy2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - '#interrupt-cells'
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - power-domains
+  - pcie@0,0
+  - pcie@1,0
+  - pcie@2,0
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  # MT7623
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/reset/mt2701-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1a140000 {
+            compatible = "mediatek,mt7623-pcie";
+            device_type = "pci";
+            reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+                  <0 0x1a142000 0 0x1000>, /* Port0 registers */
+                  <0 0x1a143000 0 0x1000>, /* Port1 registers */
+                  <0 0x1a144000 0 0x1000>; /* Port2 registers */
+            reg-names = "subsys", "port0", "port1", "port2";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0xf800 0 0 0>;
+            interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+                            <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+                            <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+                    <&hifsys CLK_HIFSYS_PCIE0>,
+                    <&hifsys CLK_HIFSYS_PCIE1>,
+                    <&hifsys CLK_HIFSYS_PCIE2>;
+            clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+            resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+                     <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+                     <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+            reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+            phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+                   <&pcie2_phy PHY_TYPE_PCIE>;
+            phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+            power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>,	/* I/O space */
+                     <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+            pcie@0,0 {
+                device_type = "pci";
+                reg = <0x0000 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+                ranges;
+            };
+
+            pcie@1,0 {
+                device_type = "pci";
+                reg = <0x0800 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+                ranges;
+            };
+
+            pcie@2,0 {
+                device_type = "pci";
+                reg = <0x1000 0 0 0 0>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 0>;
+                interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+                ranges;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
deleted file mode 100644
index 684227522267..000000000000
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ /dev/null
@@ -1,289 +0,0 @@
-MediaTek Gen2 PCIe controller
-
-Required properties:
-- compatible: Should contain one of the following strings:
-	"mediatek,mt2701-pcie"
-	"mediatek,mt2712-pcie"
-	"mediatek,mt7622-pcie"
-	"mediatek,mt7623-pcie"
-	"mediatek,mt7629-pcie"
-	"airoha,en7523-pcie"
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the root ports.
-- reg-names: Names of the above areas to use during resource lookup.
-- #address-cells: Address representation for root ports (must be 3)
-- #size-cells: Size representation for root ports (must be 2)
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names:
-  Mandatory entries:
-   - sys_ckN :transaction layer and data link layer clock
-  Required entries for MT2701/MT7623:
-   - free_ck :for reference clock of PCIe subsys
-  Required entries for MT2712/MT7622:
-   - ahb_ckN :AHB slave interface operating clock for CSR access and RC
-	      initiated MMIO access
-  Required entries for MT7622:
-   - axi_ckN :application layer MMIO channel operating clock
-   - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
-	      pcie_mac_ck/pcie_pipe_ck is turned off
-   - obff_ckN :OBFF functional block operating clock
-   - pipe_ckN :LTSSM and PHY/MAC layer operating clock
-  where N starting from 0 to one less than the number of root ports.
-- phys: List of PHY specifiers (used by generic PHY framework).
-- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
-  number of PHYs as specified in *phys* property.
-- power-domains: A phandle and power domain specifier pair to the power domain
-  which is responsible for collapsing and restoring power to the peripheral.
-- bus-range: Range of bus numbers associated with this controller.
-- ranges: Ranges for the PCI memory and I/O regions.
-
-Required properties for MT7623/MT2701:
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
-  number of root ports.
-
-Required properties for MT2712/MT7622/MT7629:
--interrupts: A list of interrupt outputs of the controller, must have one
-	     entry for each PCIe port
-- interrupt-names: Must include the following entries:
-	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-
-In addition, the device tree node must have sub-nodes describing each
-PCIe port interface, having the following mandatory properties:
-
-Required properties:
-- device_type: Must be "pci"
-- reg: Only the first four bytes are used to refer to the correct bus number
-  and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
-  property is sufficient.
-
-Examples for MT7623:
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pcie: pcie@1a140000 {
-		compatible = "mediatek,mt7623-pcie";
-		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
-		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
-		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
-		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
-		reg-names = "subsys", "port0", "port1", "port2";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 0>;
-		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
-				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
-				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&hifsys CLK_HIFSYS_PCIE0>,
-			 <&hifsys CLK_HIFSYS_PCIE1>,
-			 <&hifsys CLK_HIFSYS_PCIE2>;
-		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
-		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
-		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
-		       <&pcie2_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
-			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
-
-		pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-		};
-
-		pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-		};
-
-		pcie@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-		};
-	};
-
-Examples for MT2712:
-
-	pcie1: pcie@112ff000 {
-		compatible = "mediatek,mt2712-pcie";
-		device_type = "pci";
-		reg = <0 0x112ff000 0 0x1000>;
-		reg-names = "port1";
-		linux,pci-domain = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "pcie_irq";
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck1", "ahb_ck1";
-		phys = <&u3port1 PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy1";
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-				<0 0 0 2 &pcie_intc1 1>,
-				<0 0 0 3 &pcie_intc1 2>,
-				<0 0 0 4 &pcie_intc1 3>;
-		pcie_intc1: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-	pcie0: pcie@11700000 {
-		compatible = "mediatek,mt2712-pcie";
-		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>;
-		reg-names = "port0";
-		linux,pci-domain = <0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "pcie_irq";
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>;
-		clock-names = "sys_ck0", "ahb_ck0";
-		phys = <&u3port0 PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0";
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-				<0 0 0 2 &pcie_intc0 1>,
-				<0 0 0 3 &pcie_intc0 2>,
-				<0 0 0 4 &pcie_intc0 3>;
-		pcie_intc0: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-Examples for MT7622:
-
-	pcie0: pcie@1a143000 {
-		compatible = "mediatek,mt7622-pcie";
-		device_type = "pci";
-		reg = <0 0x1a143000 0 0x1000>;
-		reg-names = "port0";
-		linux,pci-domain = <0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "pcie_irq";
-		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
-		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
-			      "axi_ck0", "obff_ck0", "pipe_ck0";
-
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-				<0 0 0 2 &pcie_intc0 1>,
-				<0 0 0 3 &pcie_intc0 2>,
-				<0 0 0 4 &pcie_intc0 3>;
-		pcie_intc0: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-	pcie1: pcie@1a145000 {
-		compatible = "mediatek,mt7622-pcie";
-		device_type = "pci";
-		reg = <0 0x1a145000 0 0x1000>;
-		reg-names = "port1";
-		linux,pci-domain = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "pcie_irq";
-		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
-			 /* designer has connect RC1 with p0_ahb clock */
-			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
-			      "axi_ck1", "obff_ck1", "pipe_ck1";
-
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
-		status = "disabled";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-				<0 0 0 2 &pcie_intc1 1>,
-				<0 0 0 3 &pcie_intc1 2>,
-				<0 0 0 4 &pcie_intc1 3>;
-		pcie_intc1: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml
new file mode 100644
index 000000000000..0b8c78ec4f91
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml
@@ -0,0 +1,438 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - airoha,an7583-pcie
+          - mediatek,mt2712-pcie
+          - mediatek,mt7622-pcie
+          - mediatek,mt7629-pcie
+      - items:
+          - const: airoha,en7523-pcie
+          - const: mediatek,mt7622-pcie
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    enum: [ port0, port1 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ sys_ck0, sys_ck1 ]
+      - enum: [ ahb_ck0, ahb_ck1 ]
+      - enum: [ aux_ck0, aux_ck1 ]
+      - enum: [ axi_ck0, axi_ck1 ]
+      - enum: [ obff_ck0, obff_ck1 ]
+      - enum: [ pipe_ck0, pipe_ck1 ]
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: pcie-rst1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: pcie_irq
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum: [ pcie-phy0, pcie-phy1 ]
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,pbus-csr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to pbus-csr syscon
+          - description: offset of pbus-csr base address register
+          - description: offset of pbus-csr base address mask register
+    description:
+      Phandle with two arguments to the syscon node used to detect if
+      a given address is accessible on PCIe controller.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - '#interrupt-cells'
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+  - if:
+      properties:
+        compatible:
+          const: airoha,an7583-pcie
+    then:
+      properties:
+        reg-names:
+          const: port1
+
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: sys_ck1
+
+        phy-names:
+          const: pcie-phy1
+
+        power-domain: false
+
+      required:
+        - resets
+        - reset-names
+        - phys
+        - phy-names
+        - mediatek,pbus-csr
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt2712-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+        clock-names:
+          minItems: 2
+          maxItems: 2
+
+        reset: false
+
+        reset-names: false
+
+        power-domains: false
+
+        mediatek,pbus-csr: false
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7622-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 6
+
+        reset: false
+
+        reset-names: false
+
+        phys: false
+
+        phy-names: false
+
+        mediatek,pbus-csr: false
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7629-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 6
+
+        reset: false
+
+        reset-names: false
+
+        mediatek,pbus-csr: false
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: airoha,en7523-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        reset: false
+
+        reset-names: false
+
+        phys: false
+
+        phy-names: false
+
+        power-domain: false
+
+        mediatek,pbus-csr: false
+
+unevaluatedProperties: false
+
+examples:
+  # MT2712
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+
+    soc_1 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@112ff000 {
+            compatible = "mediatek,mt2712-pcie";
+            device_type = "pci";
+            reg = <0 0x112ff000 0 0x1000>;
+            reg-names = "port1";
+            linux,pci-domain = <1>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pcie_irq";
+            clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P1_SEL */
+                     <&pericfg>; /* CLK_PERI_PCIE1 */
+            clock-names = "sys_ck1", "ahb_ck1";
+            phys = <&u3port1 PHY_TYPE_PCIE>;
+            phy-names = "pcie-phy1";
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+                            <0 0 0 2 &pcie_intc1 1>,
+                            <0 0 0 3 &pcie_intc1 2>,
+                            <0 0 0 4 &pcie_intc1 3>;
+            pcie_intc1: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+
+        pcie@11700000 {
+            compatible = "mediatek,mt2712-pcie";
+            device_type = "pci";
+            reg = <0 0x11700000 0 0x1000>;
+            reg-names = "port0";
+            linux,pci-domain = <0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pcie_irq";
+            clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P0_SEL */
+                     <&pericfg>; /* CLK_PERI_PCIE0 */
+            clock-names = "sys_ck0", "ahb_ck0";
+            phys = <&u3port0 PHY_TYPE_PCIE>;
+            phy-names = "pcie-phy0";
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                            <0 0 0 2 &pcie_intc0 1>,
+                            <0 0 0 3 &pcie_intc0 2>,
+                            <0 0 0 4 &pcie_intc0 3>;
+            pcie_intc0: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
+
+  # MT7622
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt7622-power.h>
+
+    soc_2 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1a143000 {
+            compatible = "mediatek,mt7622-pcie";
+            device_type = "pci";
+            reg = <0 0x1a143000 0 0x1000>;
+            reg-names = "port0";
+            linux,pci-domain = <0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "pcie_irq";
+            clocks = <&pciesys>, /* CLK_PCIE_P0_MAC_EN */
+                     <&pciesys>, /* CLK_PCIE_P0_AHB_EN */
+                     <&pciesys>, /* CLK_PCIE_P0_AUX_EN */
+                     <&pciesys>, /* CLK_PCIE_P0_AXI_EN */
+                     <&pciesys>, /* CLK_PCIE_P0_OBFF_EN */
+                     <&pciesys>; /* CLK_PCIE_P0_PIPE_EN */
+            clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+                          "axi_ck0", "obff_ck0", "pipe_ck0";
+
+            power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc0_1 0>,
+                            <0 0 0 2 &pcie_intc0_1 1>,
+                            <0 0 0 3 &pcie_intc0_1 2>,
+                            <0 0 0 4 &pcie_intc0_1 3>;
+            pcie_intc0_1: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+
+        pcie@1a145000 {
+            compatible = "mediatek,mt7622-pcie";
+            device_type = "pci";
+            reg = <0 0x1a145000 0 0x1000>;
+            reg-names = "port1";
+            linux,pci-domain = <1>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "pcie_irq";
+            clocks = <&pciesys>, /* CLK_PCIE_P1_MAC_EN */
+                     /* designer has connect RC1 with p0_ahb clock */
+                     <&pciesys>, /* CLK_PCIE_P0_AHB_EN */
+                     <&pciesys>, /* CLK_PCIE_P1_AUX_EN */
+                     <&pciesys>, /* CLK_PCIE_P1_AXI_EN */
+                     <&pciesys>, /* CLK_PCIE_P1_OBFF_EN */
+                     <&pciesys>; /* CLK_PCIE_P1_PIPE_EN */
+            clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+                          "axi_ck1", "obff_ck1", "pipe_ck1";
+
+            power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc1_1 0>,
+                            <0 0 0 2 &pcie_intc1_1 1>,
+                            <0 0 0 3 &pcie_intc1_1 2>,
+                            <0 0 0 4 &pcie_intc1_1 3>;
+            pcie_intc1_1: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
+
+  # AN7583
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/en7523-clk.h>
+
+    soc_3 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1fa92000 {
+            compatible = "airoha,an7583-pcie";
+            device_type = "pci";
+            linux,pci-domain = <1>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            reg = <0x0 0x1fa92000 0x0 0x1670>;
+            reg-names = "port1";
+
+            clocks = <&scuclk EN7523_CLK_PCIE>;
+            clock-names = "sys_ck1";
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy1";
+
+            ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+            resets = <&scuclk>; /* AN7583_PCIE1_RST */
+            reset-names = "pcie-rst1";
+
+            mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+            interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pcie_irq";
+            bus-range = <0x00 0xff>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+                            <0 0 0 2 &pcie_intc1 1>,
+                            <0 0 0 3 &pcie_intc1 2>,
+                            <0 0 0 4 &pcie_intc1 3>;
+
+            pcie_intc1_4: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };