Merge tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.19 part2

Late fixes and cleanups:
* Fix build warnings for unapplied overlays for PHYTEC, SA67 and certain TI EVM
* Fix pinmux of SD regulator control line on J721e SK
* Correct unit address of cbass_wakeup node for AM62L

* tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: dts: ti: k3-am62l: Fix unit address of cbass_wakeup
  arm64: dts: ti: k3-j721e-sk: Fix pinmux for pin Y1 used by power regulator
  arm64: dts: ti: Add missing applied DT overlay targets
  arm64: dts: ti: sa67: add build time dtb for overlays
  arm64: dts: ti: Enable build testing of PHYTEC board overlays

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 41 insertions, 7 deletions

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8a2f0530e7cc..ba01a929e06f 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -119,9 +119,11 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo
 
 # Boards with J721e SoC
 k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
+k3-j721e-evm-gesi-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
@@ -192,6 +194,17 @@ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo
+k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-eth-phy.dtbo
+k3-am62a7-phyboard-lyra-disable-rtc-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-rtc.dtbo
+k3-am62a7-phyboard-lyra-disable-spi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-spi-nor.dtbo
+k3-am62a7-phyboard-lyra-gpio-fan-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am62x-phyboard-lyra-gpio-fan.dtbo
+k3-am62a7-phyboard-lyra-qspi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-qspi-nor.dtbo
 k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
 	k3-am62x-sk-csi2-imx219.dtbo
 k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
@@ -231,6 +244,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
 k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-am67a-kontron-sa67-base-gpios-dtbs := \
+	k3-am67a-kontron-sa67-base.dtb k3-am67a-kontron-sa67-gpios.dtbo
 k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-am68-sk-base-board-pcie1-ep-dtbs := k3-am68-sk-base-board.dtb \
@@ -269,11 +284,22 @@ k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
 dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am625-phyboard-lyra-disable-rtc.dtb \
+	k3-am625-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am625-phyboard-lyra-gpio-fan.dtb \
+	k3-am625-phyboard-lyra-qspi-nor.dtb \
 	k3-am625-sk-csi2-imx219.dtb \
 	k3-am625-sk-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-nand.dtb \
+	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am62a7-phyboard-lyra-disable-rtc.dtb \
+	k3-am62a7-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am62a7-phyboard-lyra-gpio-fan.dtb \
+	k3-am62a7-phyboard-lyra-qspi-nor.dtb \
 	k3-am62a7-sk-csi2-imx219.dtb \
 	k3-am62a7-sk-csi2-ov5640.dtb \
 	k3-am62a7-sk-hdmi-audio.dtb \
@@ -283,8 +309,16 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-evm-icssg1-dualemac.dtb \
 	k3-am642-evm-icssg1-dualemac-mii.dtb \
 	k3-am642-evm-pcie0-ep.dtb \
+	k3-am642-phyboard-electra-disable-eth-phy.dtb \
+	k3-am642-phyboard-electra-disable-rtc.dtb \
+	k3-am642-phyboard-electra-disable-spi-nor.dtb \
+	k3-am642-phyboard-electra-gpio-fan.dtb \
+	k3-am642-phyboard-electra-pcie-usb2.dtb \
+	k3-am642-phyboard-electra-peb-c-010.dtb \
+	k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+	k3-am67a-kontron-sa67-base-gpios.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
 	k3-am68-sk-base-board-pcie1-ep.dtb \
 	k3-am69-sk-csi2-dual-imx219.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62l.dtsi b/arch/arm64/boot/dts/ti/k3-am62l.dtsi
index 25a5f15a8960..23acdbb301fe 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l.dtsi
@@ -98,7 +98,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
-		cbass_wakeup:  bus@43000000 {
+		cbass_wakeup: bus@a80000 {
 			compatible = "simple-bus";
 			ranges = <0x00 0x00a80000 0x00 0x00a80000 0x00 0x00034000>, /* GTC */
 				 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00001400>, /* VTM */
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 542eabfb48db..050776cb4df8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -474,6 +474,12 @@
 			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
 		>;
 	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -536,12 +542,6 @@
 		>;
 	};
 
-	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
-		pinctrl-single,pins = <
-			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
-		>;
-	};
-
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */