crypto: qat - refactor compression template logic

The logic that generates the compression templates, which are used by to
submit compression requests to the QAT device, is very similar between
QAT devices and diverges mainly on the HW generation-specific
configuration word.

This makes the logic that generates the compression and decompression
templates common between GEN2 and GEN4 devices and abstracts the
generation-specific logic to the generation-specific implementations.

The adf_gen2_dc.c and adf_gen4_dc.c have been replaced by adf_dc.c, and
the generation-specific logic has been reduced and moved to
adf_gen2_hw_data.c and adf_gen4_hw_data.c.

This does not introduce any functional change.

Co-developed-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/crypto/intel/qat/qat_common/adf_dc.c b/drivers/crypto/intel/qat/qat_common/adf_dc.c
new file mode 100644
index 000000000000..4beb4b7dbf0e
--- /dev/null
+++ b/drivers/crypto/intel/qat/qat_common/adf_dc.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation */
+#include "adf_accel_devices.h"
+#include "adf_dc.h"
+#include "icp_qat_fw_comp.h"
+
+int qat_comp_build_ctx(struct adf_accel_dev *accel_dev, void *ctx, enum adf_dc_algo algo)
+{
+	struct icp_qat_fw_comp_req *req_tmpl = ctx;
+	struct icp_qat_fw_comp_cd_hdr *comp_cd_ctrl = &req_tmpl->comp_cd_ctrl;
+	struct icp_qat_fw_comp_req_params *req_pars = &req_tmpl->comp_pars;
+	struct icp_qat_fw_comn_req_hdr *header = &req_tmpl->comn_hdr;
+	int ret;
+
+	memset(req_tmpl, 0, sizeof(*req_tmpl));
+	header->hdr_flags =
+		ICP_QAT_FW_COMN_HDR_FLAGS_BUILD(ICP_QAT_FW_COMN_REQ_FLAG_SET);
+	header->service_type = ICP_QAT_FW_COMN_REQ_CPM_FW_COMP;
+	header->comn_req_flags =
+		ICP_QAT_FW_COMN_FLAGS_BUILD(QAT_COMN_CD_FLD_TYPE_16BYTE_DATA,
+					    QAT_COMN_PTR_TYPE_SGL);
+	header->serv_specif_flags =
+		ICP_QAT_FW_COMP_FLAGS_BUILD(ICP_QAT_FW_COMP_STATELESS_SESSION,
+					    ICP_QAT_FW_COMP_NOT_AUTO_SELECT_BEST,
+					    ICP_QAT_FW_COMP_NOT_ENH_AUTO_SELECT_BEST,
+					    ICP_QAT_FW_COMP_NOT_DISABLE_TYPE0_ENH_AUTO_SELECT_BEST,
+					    ICP_QAT_FW_COMP_ENABLE_SECURE_RAM_USED_AS_INTMD_BUF);
+
+	/* Build HW config block for compression */
+	ret = GET_DC_OPS(accel_dev)->build_comp_block(ctx, algo);
+	if (ret) {
+		dev_err(&GET_DEV(accel_dev), "Failed to build compression block\n");
+		return ret;
+	}
+
+	req_pars->crc.legacy.initial_adler = COMP_CPR_INITIAL_ADLER;
+	req_pars->crc.legacy.initial_crc32 = COMP_CPR_INITIAL_CRC;
+	req_pars->req_par_flags =
+		ICP_QAT_FW_COMP_REQ_PARAM_FLAGS_BUILD(ICP_QAT_FW_COMP_SOP,
+						      ICP_QAT_FW_COMP_EOP,
+						      ICP_QAT_FW_COMP_BFINAL,
+						      ICP_QAT_FW_COMP_CNV,
+						      ICP_QAT_FW_COMP_CNV_RECOVERY,
+						      ICP_QAT_FW_COMP_NO_CNV_DFX,
+						      ICP_QAT_FW_COMP_CRC_MODE_LEGACY,
+						      ICP_QAT_FW_COMP_NO_XXHASH_ACC,
+						      ICP_QAT_FW_COMP_CNV_ERROR_NONE,
+						      ICP_QAT_FW_COMP_NO_APPEND_CRC,
+						      ICP_QAT_FW_COMP_NO_DROP_DATA);
+	ICP_QAT_FW_COMN_NEXT_ID_SET(comp_cd_ctrl, ICP_QAT_FW_SLICE_DRAM_WR);
+	ICP_QAT_FW_COMN_CURR_ID_SET(comp_cd_ctrl, ICP_QAT_FW_SLICE_COMP);
+
+	/* Fill second half of the template for decompression */
+	memcpy(req_tmpl + 1, req_tmpl, sizeof(*req_tmpl));
+	req_tmpl++;
+
+	/* Build HW config block for decompression */
+	ret = GET_DC_OPS(accel_dev)->build_decomp_block(req_tmpl, algo);
+	if (ret)
+		dev_err(&GET_DEV(accel_dev), "Failed to build decompression block\n");
+
+	return ret;
+}