Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net

Some of the devlink bits were tricky, but I think I got it right.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 38 insertions, 15 deletions

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 31bce529f685..9c7b69d377bd 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1184,24 +1184,38 @@ static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_
 
 	memset(pa_config, 0, sizeof(*pa_config));
 
-	logical_addr_low  = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18;
-	pt_base = amdgpu_gmc_pd_addr(adev->gart.bo);
-
-	if (adev->apu_flags & AMD_APU_IS_RAVEN2)
-		/*
-		 * Raven2 has a HW issue that it is unable to use the vram which
-		 * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
-		 * workaround that increase system aperture high address (add 1)
-		 * to get rid of the VM fault and hardware hang.
-		 */
-		logical_addr_high = max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18);
-	else
-		logical_addr_high = max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18;
-
 	agp_base = 0;
 	agp_bot = adev->gmc.agp_start >> 24;
 	agp_top = adev->gmc.agp_end >> 24;
 
+	/* AGP aperture is disabled */
+	if (agp_bot == agp_top) {
+		logical_addr_low  = adev->gmc.vram_start >> 18;
+		if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+			/*
+			 * Raven2 has a HW issue that it is unable to use the vram which
+			 * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
+			 * workaround that increase system aperture high address (add 1)
+			 * to get rid of the VM fault and hardware hang.
+			 */
+			logical_addr_high = (adev->gmc.fb_end >> 18) + 0x1;
+		else
+			logical_addr_high = adev->gmc.vram_end >> 18;
+	} else {
+		logical_addr_low  = min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18;
+		if (adev->apu_flags & AMD_APU_IS_RAVEN2)
+			/*
+			 * Raven2 has a HW issue that it is unable to use the vram which
+			 * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
+			 * workaround that increase system aperture high address (add 1)
+			 * to get rid of the VM fault and hardware hang.
+			 */
+			logical_addr_high = max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18);
+		else
+			logical_addr_high = max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18;
+	}
+
+	pt_base = amdgpu_gmc_pd_addr(adev->gart.bo);
 
 	page_table_start.high_part = (u32)(adev->gmc.gart_start >> 44) & 0xF;
 	page_table_start.low_part = (u32)(adev->gmc.gart_start >> 12);
@@ -1503,6 +1517,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 		case IP_VERSION(3, 0, 1):
 		case IP_VERSION(3, 1, 2):
 		case IP_VERSION(3, 1, 3):
+		case IP_VERSION(3, 1, 4):
+		case IP_VERSION(3, 1, 5):
 		case IP_VERSION(3, 1, 6):
 			init_data.flags.gpu_vm_support = true;
 			break;
@@ -1511,6 +1527,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 		}
 		break;
 	}
+	if (init_data.flags.gpu_vm_support &&
+	    (amdgpu_sg_display == 0))
+		init_data.flags.gpu_vm_support = false;
 
 	if (init_data.flags.gpu_vm_support)
 		adev->mode_info.gpu_vm_support = true;
@@ -9639,7 +9658,11 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 	 * `dcn10_can_pipe_disable_cursor`). By now, all modified planes are in
 	 * atomic state, so call drm helper to normalize zpos.
 	 */
-	drm_atomic_normalize_zpos(dev, state);
+	ret = drm_atomic_normalize_zpos(dev, state);
+	if (ret) {
+		drm_dbg(dev, "drm_atomic_normalize_zpos() failed\n");
+		goto fail;
+	}
 
 	/* Remove exiting planes if they are modified */
 	for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state, new_plane_state, i) {