Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.12:

UAPI Changes:

virtio:
- Define DRM capset

Cross-subsystem Changes:

dma-buf:
- heaps: Clean up documentation

printk:
- Pass description to kmsg_dump()

Core Changes:

CI:
- Update IGT tests
- Point upstream repo to GitLab instance

modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support

panic:
- Avoid build-time interference with framebuffer console

docs:
- Document Colorspace property

scheduler:
- Remove full_recover from drm_sched_start

TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory

Driver Changes:

amdgpu:
- Support Power Saving Policy connector property

ast:
- astdp: Support AST2600 with VGA; Clean up HPD

bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable

gma500:
- Update i2c terminology

ivpu:
- Add MODULE_FIRMWARE()

lcdif:
- Fix pixel clock

loongson:
- Use GEM refcount over TTM's

mgag200:
- Improve BMC handling
- Support VBLANK intterupts

nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's

panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
  DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
  BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
  CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
  for code sharing

sti:
- Fix module owner

stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt

tegra:
- Call drm_atomic_helper_shutdown()

v3d:
- Clean up perfmon

vkms:
- Clean up

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box

1 files changed, 26 insertions, 9 deletions

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 3a574a9b46e7..2733366b02b0 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -954,16 +954,24 @@ static void panel_edp_shutdown(struct device *dev)
 	 * drm_atomic_helper_shutdown() at shutdown time and that should
 	 * cause the panel to be disabled / unprepared if needed. For now,
 	 * however, we'll keep these calls due to the sheer number of
-	 * different DRM modeset drivers used with panel-edp. The fact that
-	 * we're calling these and _also_ the drm_atomic_helper_shutdown()
-	 * will try to disable/unprepare means that we can get a warning about
-	 * trying to disable/unprepare an already disabled/unprepared panel,
-	 * but that's something we'll have to live with until we've confirmed
-	 * that all DRM modeset drivers are properly calling
-	 * drm_atomic_helper_shutdown().
+	 * different DRM modeset drivers used with panel-edp. Once we've
+	 * confirmed that all DRM modeset drivers using this panel properly
+	 * call drm_atomic_helper_shutdown() we can simply delete the two
+	 * calls below.
+	 *
+	 * TO BE EXPLICIT: THE CALLS BELOW SHOULDN'T BE COPIED TO ANY NEW
+	 * PANEL DRIVERS.
+	 *
+	 * FIXME: If we're still haven't figured out if all DRM modeset
+	 * drivers properly call drm_atomic_helper_shutdown() but we _have_
+	 * managed to make sure that DRM modeset drivers get their shutdown()
+	 * callback before the panel's shutdown() callback (perhaps using
+	 * device link), we could add a WARN_ON here to help move forward.
 	 */
-	drm_panel_disable(&panel->base);
-	drm_panel_unprepare(&panel->base);
+	if (panel->base.enabled)
+		drm_panel_disable(&panel->base);
+	if (panel->base.prepared)
+		drm_panel_unprepare(&panel->base);
 }
 
 static void panel_edp_remove(struct device *dev)
@@ -1845,7 +1853,10 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x723c, &delay_200_500_e50, "B140XTN07.2"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x73aa, &delay_200_500_e50, "B116XTN02.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x8594, &delay_200_500_e50, "B133UAN01.0"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0xa199, &delay_200_500_e50, "B116XAN06.1"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0xc4b4, &delay_200_500_e50, "B116XAT04.1"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0xd497, &delay_200_500_e50, "B120XAN01.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0xf390, &delay_200_500_e50, "B140XTN07.7"),
 
@@ -1891,15 +1902,18 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09ad, &delay_200_500_e80, "NV116WHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09ae, &delay_200_500_e200, "NT140FHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x09dd, &delay_200_500_e50, "NT116WHM-N21"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a1b, &delay_200_500_e50, "NV133WUM-N63"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a36, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a3e, &delay_200_500_e80, "NV116WHM-N49"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0a5d, &delay_200_500_e50, "NV116WHM-N45"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0ac5, &delay_200_500_e50, "NV116WHM-N4C"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0ae8, &delay_200_500_e50_p2e80, "NV140WUM-N41"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b34, &delay_200_500_e80, "NV122WUM-N41"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b43, &delay_200_500_e200, "NV140FHM-T09"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0b56, &delay_200_500_e80, "NT140FHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c20, &delay_200_500_e80, "NT140FHM-N47"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cb6, &delay_200_500_e200, "NT116WHM-N44"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cfa, &delay_200_500_e50, "NV116WHM-A4D"),
 
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1130, &delay_200_500_e50, "N116BGE-EB2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1132, &delay_200_500_e80_d50, "N116BGE-EA2"),
@@ -1915,8 +1929,10 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1156, &delay_200_500_e80_d50, "Unknown"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1157, &delay_200_500_e80_d50, "N116BGE-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115b, &delay_200_500_e80_d50, "N116BCN-EB1"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115d, &delay_200_500_e80_d50, "N116BCA-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x115e, &delay_200_500_e80_d50, "N116BCA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1160, &delay_200_500_e80_d50, "N116BCJ-EAK"),
+	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1161, &delay_200_500_e80, "N116BCP-EA2"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x1247, &delay_200_500_e80_d50, "N120ACA-EA1"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142b, &delay_200_500_e80_d50, "N140HCA-EAC"),
 	EDP_PANEL_ENTRY('C', 'M', 'N', 0x142e, &delay_200_500_e80_d50, "N140BGA-EA4"),
@@ -1929,6 +1945,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('C', 'S', 'O', 0x1200, &delay_200_500_e50_p2e200, "MNC207QS1-1"),
 
 	EDP_PANEL_ENTRY('C', 'S', 'W', 0x1100, &delay_200_500_e80_d50, "MNB601LS1-1"),
+	EDP_PANEL_ENTRY('C', 'S', 'W', 0x1104, &delay_200_500_e50, "MNB601LS1-4"),
 
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d51, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('H', 'K', 'C', 0x2d5b, &delay_200_500_e200, "Unknown"),