Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from Viresh Kumar <viresh.kumar@linaro.org>:

Hello,

This cleans up some of the user code around calls to
dev_pm_opp_of_remove_table().

All the patches can be picked by respective maintainers directly except
for the last patch, which needs the previous two to get merged first.

These are based for 5.9-rc1.

Rajendra, Since most of these changes are related to qcom stuff, it
would be great if you can give them a try. I wasn't able to test them
due to lack of hardware.

Ulf, I had to revise the sdhci patch, sorry about that. Please pick this
one.

Diff between V1 and V2 is mentioned in each of the patches separately.

Viresh Kumar (8):
  cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
  drm/lima: Unconditionally call dev_pm_opp_of_remove_table()
  drm/msm: Unconditionally call dev_pm_opp_of_remove_table()
  mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-geni-qcom: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-qcom-qspi: Unconditionally call dev_pm_opp_of_remove_table()
  tty: serial: qcom_geni_serial: Unconditionally call
    dev_pm_opp_of_remove_table()
  qcom-geni-se: remove has_opp_table

 drivers/cpufreq/imx6q-cpufreq.c         | 10 ++--------
 drivers/gpu/drm/lima/lima_devfreq.c     |  6 +-----
 drivers/gpu/drm/lima/lima_devfreq.h     |  1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 14 +++++---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 -
 drivers/gpu/drm/msm/dsi/dsi_host.c      |  8 ++------
 drivers/mmc/host/sdhci-msm.c            | 14 +++++---------
 drivers/spi/spi-geni-qcom.c             | 13 +++++--------
 drivers/spi/spi-qcom-qspi.c             | 15 ++++++---------
 drivers/tty/serial/qcom_geni_serial.c   | 13 +++++--------
 include/linux/qcom-geni-se.h            |  2 --
 11 files changed, 31 insertions(+), 66 deletions(-)

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.25.0.rc1.19.g042ed3e048af

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index d9ee8e3dc72d..178954228631 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -371,7 +371,7 @@ again:
 			serial mode), then just fall through */
 		if (msb_read_int_reg(msb, -1))
 			return 0;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_RP_RECEIVE_INT_REQ_RESULT:
 		intreg = mrq->data[0];
@@ -403,7 +403,7 @@ again:
 	case MSB_RP_RECEIVE_STATUS_REG:
 		msb->regs.status = *(struct ms_status_register *)mrq->data;
 		msb->state = MSB_RP_SEND_OOB_READ;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_RP_SEND_OOB_READ:
 		if (!msb_read_regs(msb,
@@ -418,7 +418,7 @@ again:
 		msb->regs.extra_data =
 			*(struct ms_extra_data_register *) mrq->data;
 		msb->state = MSB_RP_SEND_READ_DATA;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_RP_SEND_READ_DATA:
 		/* Skip that state if we only read the oob */
@@ -518,7 +518,7 @@ again:
 		msb->state = MSB_WB_RECEIVE_INT_REQ;
 		if (msb_read_int_reg(msb, -1))
 			return 0;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_WB_RECEIVE_INT_REQ:
 		intreg = mrq->data[0];
@@ -549,7 +549,7 @@ again:
 
 		msb->int_polling = false;
 		msb->state = MSB_WB_SEND_WRITE_DATA;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_WB_SEND_WRITE_DATA:
 		sg_init_table(sg, ARRAY_SIZE(sg));
@@ -628,7 +628,7 @@ again:
 		msb->state = MSB_SC_RECEIVE_INT_REQ;
 		if (msb_read_int_reg(msb, -1))
 			return 0;
-		/* fallthrough */
+		fallthrough;
 
 	case MSB_SC_RECEIVE_INT_REQ:
 		intreg = mrq->data[0];