Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char / misc and other driver subsystem updates
  for 5.14-rc1. Included in here are:

   - habanalabs driver updates

   - fsl-mc driver updates

   - comedi driver updates

   - fpga driver updates

   - extcon driver updates

   - interconnect driver updates

   - mei driver updates

   - nvmem driver updates

   - phy driver updates

   - pnp driver updates

   - soundwire driver updates

   - lots of other tiny driver updates for char and misc drivers

  This is looking more and more like the "various driver subsystems
  mushed together" tree...

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
  PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
  bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
  bus: mhi: Wait for M2 state during system resume
  bus: mhi: core: Fix power down latency
  intel_th: Wait until port is in reset before programming it
  intel_th: msu: Make contiguous buffers uncached
  intel_th: Remove an unused exit point from intel_th_remove()
  stm class: Spelling fix
  nitro_enclaves: Set Bus Master for the NE PCI device
  misc: ibmasm: Modify matricies to matrices
  misc: vmw_vmci: return the correct errno code
  siox: Simplify error handling via dev_err_probe()
  fpga: machxo2-spi: Address warning about unused variable
  lkdtm/heap: Add init_on_alloc tests
  selftests/lkdtm: Enable various testable CONFIGs
  lkdtm: Add CONFIG hints in errors where possible
  lkdtm: Enable DOUBLE_FAULT on all architectures
  lkdtm/heap: Add vmalloc linear overflow test
  lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
  ...

1 files changed, 90 insertions, 133 deletions

diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c
index 252e15ba65e1..bb9c4512c968 100644
--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -32,16 +32,17 @@
  */
 
 #define EE1004_ADDR_SET_PAGE		0x36
-#define EE1004_EEPROM_SIZE		512
+#define EE1004_NUM_PAGES		2
 #define EE1004_PAGE_SIZE		256
 #define EE1004_PAGE_SHIFT		8
+#define EE1004_EEPROM_SIZE		(EE1004_PAGE_SIZE * EE1004_NUM_PAGES)
 
 /*
  * Mutex protects ee1004_set_page and ee1004_dev_count, and must be held
  * from page selection to end of read.
  */
 static DEFINE_MUTEX(ee1004_bus_lock);
-static struct i2c_client *ee1004_set_page[2];
+static struct i2c_client *ee1004_set_page[EE1004_NUM_PAGES];
 static unsigned int ee1004_dev_count;
 static int ee1004_current_page;
 
@@ -71,40 +72,58 @@ static int ee1004_get_current_page(void)
 	return 0;
 }
 
+static int ee1004_set_current_page(struct device *dev, int page)
+{
+	int ret;
+
+	if (page == ee1004_current_page)
+		return 0;
+
+	/* Data is ignored */
+	ret = i2c_smbus_write_byte(ee1004_set_page[page], 0x00);
+	/*
+	 * Don't give up just yet. Some memory modules will select the page
+	 * but not ack the command. Check which page is selected now.
+	 */
+	if (ret == -ENXIO && ee1004_get_current_page() == page)
+		ret = 0;
+	if (ret < 0) {
+		dev_err(dev, "Failed to select page %d (%d)\n", page, ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "Selected page %d\n", page);
+	ee1004_current_page = page;
+
+	return 0;
+}
+
 static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
 				  unsigned int offset, size_t count)
 {
-	int status;
+	int status, page;
+
+	page = offset >> EE1004_PAGE_SHIFT;
+	offset &= (1 << EE1004_PAGE_SHIFT) - 1;
+
+	status = ee1004_set_current_page(&client->dev, page);
+	if (status)
+		return status;
 
-	if (count > I2C_SMBUS_BLOCK_MAX)
-		count = I2C_SMBUS_BLOCK_MAX;
 	/* Can't cross page boundaries */
-	if (unlikely(offset + count > EE1004_PAGE_SIZE))
+	if (offset + count > EE1004_PAGE_SIZE)
 		count = EE1004_PAGE_SIZE - offset;
 
-	status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
-							   count, buf);
-	dev_dbg(&client->dev, "read %zu@%d --> %d\n", count, offset, status);
-
-	return status;
+	return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
 }
 
-static ssize_t ee1004_read(struct file *filp, struct kobject *kobj,
+static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
 			   struct bin_attribute *bin_attr,
 			   char *buf, loff_t off, size_t count)
 {
-	struct device *dev = kobj_to_dev(kobj);
-	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
 	size_t requested = count;
-	int page;
-
-	if (unlikely(!count))
-		return count;
-
-	page = off >> EE1004_PAGE_SHIFT;
-	if (unlikely(page > 1))
-		return 0;
-	off &= (1 << EE1004_PAGE_SHIFT) - 1;
+	int ret = 0;
 
 	/*
 	 * Read data from chip, protecting against concurrent access to
@@ -113,139 +132,85 @@ static ssize_t ee1004_read(struct file *filp, struct kobject *kobj,
 	mutex_lock(&ee1004_bus_lock);
 
 	while (count) {
-		int status;
-
-		/* Select page */
-		if (page != ee1004_current_page) {
-			/* Data is ignored */
-			status = i2c_smbus_write_byte(ee1004_set_page[page],
-						      0x00);
-			if (status == -ENXIO) {
-				/*
-				 * Don't give up just yet. Some memory
-				 * modules will select the page but not
-				 * ack the command. Check which page is
-				 * selected now.
-				 */
-				if (ee1004_get_current_page() == page)
-					status = 0;
-			}
-			if (status < 0) {
-				dev_err(dev, "Failed to select page %d (%d)\n",
-					page, status);
-				mutex_unlock(&ee1004_bus_lock);
-				return status;
-			}
-			dev_dbg(dev, "Selected page %d\n", page);
-			ee1004_current_page = page;
-		}
-
-		status = ee1004_eeprom_read(client, buf, off, count);
-		if (status < 0) {
-			mutex_unlock(&ee1004_bus_lock);
-			return status;
-		}
-		buf += status;
-		off += status;
-		count -= status;
+		ret = ee1004_eeprom_read(client, buf, off, count);
+		if (ret < 0)
+			goto out;
 
-		if (off == EE1004_PAGE_SIZE) {
-			page++;
-			off = 0;
-		}
+		buf += ret;
+		off += ret;
+		count -= ret;
 	}
-
+out:
 	mutex_unlock(&ee1004_bus_lock);
 
-	return requested;
+	return ret < 0 ? ret : requested;
 }
 
-static const struct bin_attribute eeprom_attr = {
-	.attr = {
-		.name = "eeprom",
-		.mode = 0444,
-	},
-	.size = EE1004_EEPROM_SIZE,
-	.read = ee1004_read,
+static BIN_ATTR_RO(eeprom, EE1004_EEPROM_SIZE);
+
+static struct bin_attribute *ee1004_attrs[] = {
+	&bin_attr_eeprom,
+	NULL
 };
 
-static int ee1004_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+BIN_ATTRIBUTE_GROUPS(ee1004);
+
+static void ee1004_cleanup(int idx)
+{
+	if (--ee1004_dev_count == 0)
+		while (--idx >= 0) {
+			i2c_unregister_device(ee1004_set_page[idx]);
+			ee1004_set_page[idx] = NULL;
+		}
+}
+
+static int ee1004_probe(struct i2c_client *client)
 {
 	int err, cnr = 0;
-	const char *slow = NULL;
 
 	/* Make sure we can operate on this adapter */
 	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE |
-				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
-		if (i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE |
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
-			slow = "word";
-		else if (i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE |
-				     I2C_FUNC_SMBUS_READ_BYTE_DATA))
-			slow = "byte";
-		else
-			return -EPFNOSUPPORT;
-	}
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_I2C_BLOCK) &&
+	    !i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -EPFNOSUPPORT;
 
 	/* Use 2 dummy devices for page select command */
 	mutex_lock(&ee1004_bus_lock);
 	if (++ee1004_dev_count == 1) {
-		for (cnr = 0; cnr < 2; cnr++) {
-			ee1004_set_page[cnr] = i2c_new_dummy_device(client->adapter,
-						EE1004_ADDR_SET_PAGE + cnr);
-			if (IS_ERR(ee1004_set_page[cnr])) {
-				dev_err(&client->dev,
-					"address 0x%02x unavailable\n",
-					EE1004_ADDR_SET_PAGE + cnr);
-				err = PTR_ERR(ee1004_set_page[cnr]);
+		for (cnr = 0; cnr < EE1004_NUM_PAGES; cnr++) {
+			struct i2c_client *cl;
+
+			cl = i2c_new_dummy_device(client->adapter, EE1004_ADDR_SET_PAGE + cnr);
+			if (IS_ERR(cl)) {
+				err = PTR_ERR(cl);
 				goto err_clients;
 			}
+			ee1004_set_page[cnr] = cl;
 		}
-	} else if (i2c_adapter_id(client->adapter) !=
-		   i2c_adapter_id(ee1004_set_page[0]->adapter)) {
+
+		/* Remember current page to avoid unneeded page select */
+		err = ee1004_get_current_page();
+		if (err < 0)
+			goto err_clients;
+		dev_dbg(&client->dev, "Currently selected page: %d\n", err);
+		ee1004_current_page = err;
+	} else if (client->adapter != ee1004_set_page[0]->adapter) {
 		dev_err(&client->dev,
 			"Driver only supports devices on a single I2C bus\n");
 		err = -EOPNOTSUPP;
 		goto err_clients;
 	}
-
-	/* Remember current page to avoid unneeded page select */
-	err = ee1004_get_current_page();
-	if (err < 0)
-		goto err_clients;
-	ee1004_current_page = err;
-	dev_dbg(&client->dev, "Currently selected page: %d\n",
-		ee1004_current_page);
 	mutex_unlock(&ee1004_bus_lock);
 
-	/* Create the sysfs eeprom file */
-	err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
-	if (err)
-		goto err_clients_lock;
-
 	dev_info(&client->dev,
 		 "%u byte EE1004-compliant SPD EEPROM, read-only\n",
 		 EE1004_EEPROM_SIZE);
-	if (slow)
-		dev_notice(&client->dev,
-			   "Falling back to %s reads, performance will suffer\n",
-			   slow);
 
 	return 0;
 
- err_clients_lock:
-	mutex_lock(&ee1004_bus_lock);
  err_clients:
-	if (--ee1004_dev_count == 0) {
-		for (cnr--; cnr >= 0; cnr--) {
-			i2c_unregister_device(ee1004_set_page[cnr]);
-			ee1004_set_page[cnr] = NULL;
-		}
-	}
+	ee1004_cleanup(cnr);
 	mutex_unlock(&ee1004_bus_lock);
 
 	return err;
@@ -253,18 +218,9 @@ static int ee1004_probe(struct i2c_client *client,
 
 static int ee1004_remove(struct i2c_client *client)
 {
-	int i;
-
-	sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
-
 	/* Remove page select clients if this is the last device */
 	mutex_lock(&ee1004_bus_lock);
-	if (--ee1004_dev_count == 0) {
-		for (i = 0; i < 2; i++) {
-			i2c_unregister_device(ee1004_set_page[i]);
-			ee1004_set_page[i] = NULL;
-		}
-	}
+	ee1004_cleanup(EE1004_NUM_PAGES);
 	mutex_unlock(&ee1004_bus_lock);
 
 	return 0;
@@ -275,8 +231,9 @@ static int ee1004_remove(struct i2c_client *client)
 static struct i2c_driver ee1004_driver = {
 	.driver = {
 		.name = "ee1004",
+		.dev_groups = ee1004_groups,
 	},
-	.probe = ee1004_probe,
+	.probe_new = ee1004_probe,
 	.remove = ee1004_remove,
 	.id_table = ee1004_ids,
 };