Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Enable memcg accounting for various networking objects.

  BPF:

   - Introduce bpf timers.

   - Add perf link and opaque bpf_cookie which the program can read out
     again, to be used in libbpf-based USDT library.

   - Add bpf_task_pt_regs() helper to access user space pt_regs in
     kprobes, to help user space stack unwinding.

   - Add support for UNIX sockets for BPF sockmap.

   - Extend BPF iterator support for UNIX domain sockets.

   - Allow BPF TCP congestion control progs and bpf iterators to call
     bpf_setsockopt(), e.g. to switch to another congestion control
     algorithm.

  Protocols:

   - Support IOAM Pre-allocated Trace with IPv6.

   - Support Management Component Transport Protocol.

   - bridge: multicast: add vlan support.

   - netfilter: add hooks for the SRv6 lightweight tunnel driver.

   - tcp:
       - enable mid-stream window clamping (by user space or BPF)
       - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
       - more accurate DSACK processing for RACK-TLP

   - mptcp:
       - add full mesh path manager option
       - add partial support for MP_FAIL
       - improve use of backup subflows
       - optimize option processing

   - af_unix: add OOB notification support.

   - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
     router.

   - mac80211: Target Wake Time support in AP mode.

   - can: j1939: extend UAPI to notify about RX status.

  Driver APIs:

   - Add page frag support in page pool API.

   - Many improvements to the DSA (distributed switch) APIs.

   - ethtool: extend IRQ coalesce uAPI with timer reset modes.

   - devlink: control which auxiliary devices are created.

   - Support CAN PHYs via the generic PHY subsystem.

   - Proper cross-chip support for tag_8021q.

   - Allow TX forwarding for the software bridge data path to be
     offloaded to capable devices.

  Drivers:

   - veth: more flexible channels number configuration.

   - openvswitch: introduce per-cpu upcall dispatch.

   - Add internet mix (IMIX) mode to pktgen.

   - Transparently handle XDP operations in the bonding driver.

   - Add LiteETH network driver.

   - Renesas (ravb):
       - support Gigabit Ethernet IP

   - NXP Ethernet switch (sja1105):
       - fast aging support
       - support for "H" switch topologies
       - traffic termination for ports under VLAN-aware bridge

   - Intel 1G Ethernet
       - support getcrosststamp() with PCIe PTM (Precision Time
         Measurement) for better time sync
       - support Credit-Based Shaper (CBS) offload, enabling HW traffic
         prioritization and bandwidth reservation

   - Broadcom Ethernet (bnxt)
       - support pulse-per-second output
       - support larger Rx rings

   - Mellanox Ethernet (mlx5)
       - support ethtool RSS contexts and MQPRIO channel mode
       - support LAG offload with bridging
       - support devlink rate limit API
       - support packet sampling on tunnels

   - Huawei Ethernet (hns3):
       - basic devlink support
       - add extended IRQ coalescing support
       - report extended link state

   - Netronome Ethernet (nfp):
       - add conntrack offload support

   - Broadcom WiFi (brcmfmac):
       - add WPA3 Personal with FT to supported cipher suites
       - support 43752 SDIO device

   - Intel WiFi (iwlwifi):
       - support scanning hidden 6GHz networks
       - support for a new hardware family (Bz)

   - Xen pv driver:
       - harden netfront against malicious backends

   - Qualcomm mobile
       - ipa: refactor power management and enable automatic suspend
       - mhi: move MBIM to WWAN subsystem interfaces

  Refactor:

   - Ambient BPF run context and cgroup storage cleanup.

   - Compat rework for ndo_ioctl.

  Old code removal:

   - prism54 remove the obsoleted driver, deprecated by the p54 driver.

   - wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
  net: Add depends on OF_NET for LiteX's LiteETH
  ipv6: seg6: remove duplicated include
  net: hns3: remove unnecessary spaces
  net: hns3: add some required spaces
  net: hns3: clean up a type mismatch warning
  net: hns3: refine function hns3_set_default_feature()
  ipv6: remove duplicated 'net/lwtunnel.h' include
  net: w5100: check return value after calling platform_get_resource()
  net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
  net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
  net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
  fou: remove sparse errors
  ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
  octeontx2-af: Set proper errorcode for IPv4 checksum errors
  octeontx2-af: Fix static code analyzer reported issues
  octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
  octeontx2-af: Fix loop in free and unmap counter
  af_unix: fix potential NULL deref in unix_dgram_connect()
  dpaa2-eth: Replace strlcpy with strscpy
  octeontx2-af: Use NDC TX for transmit packet data
  ...

1 files changed, 66 insertions, 0 deletions

diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c
index 311d8564d611..e3d840b81357 100644
--- a/drivers/net/can/dev/dev.c
+++ b/drivers/net/can/dev/dev.c
@@ -15,6 +15,7 @@
 #include <linux/can/dev.h>
 #include <linux/can/skb.h>
 #include <linux/can/led.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
 
 #define MOD_DESC "CAN device driver interface"
@@ -400,10 +401,69 @@ void close_candev(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(close_candev);
 
+static int can_set_termination(struct net_device *ndev, u16 term)
+{
+	struct can_priv *priv = netdev_priv(ndev);
+	int set;
+
+	if (term == priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED])
+		set = 1;
+	else
+		set = 0;
+
+	gpiod_set_value(priv->termination_gpio, set);
+
+	return 0;
+}
+
+static int can_get_termination(struct net_device *ndev)
+{
+	struct can_priv *priv = netdev_priv(ndev);
+	struct device *dev = ndev->dev.parent;
+	struct gpio_desc *gpio;
+	u32 term;
+	int ret;
+
+	/* Disabling termination by default is the safe choice: Else if many
+	 * bus participants enable it, no communication is possible at all.
+	 */
+	gpio = devm_gpiod_get_optional(dev, "termination", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return dev_err_probe(dev, PTR_ERR(gpio),
+				     "Cannot get termination-gpios\n");
+
+	if (!gpio)
+		return 0;
+
+	ret = device_property_read_u32(dev, "termination-ohms", &term);
+	if (ret) {
+		netdev_err(ndev, "Cannot get termination-ohms: %pe\n",
+			   ERR_PTR(ret));
+		return ret;
+	}
+
+	if (term > U16_MAX) {
+		netdev_err(ndev, "Invalid termination-ohms value (%u > %u)\n",
+			   term, U16_MAX);
+		return -EINVAL;
+	}
+
+	priv->termination_const_cnt = ARRAY_SIZE(priv->termination_gpio_ohms);
+	priv->termination_const = priv->termination_gpio_ohms;
+	priv->termination_gpio = gpio;
+	priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_DISABLED] =
+		CAN_TERMINATION_DISABLED;
+	priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED] = term;
+	priv->do_set_termination = can_set_termination;
+
+	return 0;
+}
+
 /* Register the CAN network device */
 int register_candev(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
+	int err;
 
 	/* Ensure termination_const, termination_const_cnt and
 	 * do_set_termination consistency. All must be either set or
@@ -419,6 +479,12 @@ int register_candev(struct net_device *dev)
 	if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt)
 		return -EINVAL;
 
+	if (!priv->termination_const) {
+		err = can_get_termination(dev);
+		if (err)
+			return err;
+	}
+
 	dev->rtnl_link_ops = &can_link_ops;
 	netif_carrier_off(dev);