summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mt7530.h
diff options
context:
space:
mode:
authorArınç ÜNAL <arinc.unal@arinc9.com>2024-01-22 08:35:54 +0300
committerJakub Kicinski <kuba@kernel.org>2024-01-29 18:04:11 -0800
commit1f4a85f2eaa8f21ea19c27d63258fd46f8b45290 (patch)
treebc68fb61f90fb09513567a5862299054a826bc3f /drivers/net/dsa/mt7530.h
parentb198c9097f0659da80e675a9df94f83ec9495076 (diff)
net: dsa: mt7530: store port 5 SGMII capability of MT7531
Introduce the p5_sgmii field to store the information for whether port 5 has got SGMII or not. Instead of reading the MT7531_TOP_SIG_SR register multiple times, the register will be read once and the value will be stored on the p5_sgmii field. This saves unnecessary reads of the register. Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the switch is identified. Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the information. Address the code where mt7531_dual_sgmii_supported() is used. Get rid of mt7531_is_rgmii_port() which just prints the opposite of priv->p5_sgmii. Instead of calling mt7531_pll_setup() then returning, do not call it if port 5 is SGMII. Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to represent the mode that port 5 is being used in, not the hardware information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if port 5 is not dsa_is_unused_port(). Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-3-042401f2b279@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/mt7530.h')
-rw-r--r--drivers/net/dsa/mt7530.h6
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 9cbf18efa416..80060cc740d2 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -687,7 +687,6 @@ enum p5_interface_select {
P5_INTF_SEL_PHY_P0,
P5_INTF_SEL_PHY_P4,
P5_INTF_SEL_GMAC5,
- P5_INTF_SEL_GMAC5_SGMII,
};
struct mt7530_priv;
@@ -756,6 +755,8 @@ struct mt753x_info {
* registers
* @p6_interface Holding the current port 6 interface
* @p5_intf_sel: Holding the current port 5 interface select
+ * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
+ * has got SGMII
* @irq: IRQ number of the switch
* @irq_domain: IRQ domain of the switch irq_chip
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
@@ -777,6 +778,7 @@ struct mt7530_priv {
phy_interface_t p6_interface;
phy_interface_t p5_interface;
enum p5_interface_select p5_intf_sel;
+ bool p5_sgmii;
u8 mirror_rx;
u8 mirror_tx;
struct mt7530_port ports[MT7530_NUM_PORTS];
@@ -786,7 +788,7 @@ struct mt7530_priv {
int irq;
struct irq_domain *irq_domain;
u32 irq_enable;
- int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
+ int (*create_sgmii)(struct mt7530_priv *priv);
u8 active_cpu_ports;
};