summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_adminq.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2025-07-30 08:58:55 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2025-07-30 08:58:55 -0700
commit8be4d31cb8aaeea27bde4b7ddb26e28a89062ebf (patch)
treefec3039a08284cd87f4ec9c3bea5b5a439f1859f /drivers/net/ethernet/intel/i40e/i40e_adminq.c
parent4b290aae788e06561754b28c6842e4080957d3f7 (diff)
parentfa582ca7e187a15e772e6a72fe035f649b387a60 (diff)
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_adminq.c')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_adminq.c68
1 files changed, 34 insertions, 34 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 175c1320c143..096ec46bb619 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -18,7 +18,7 @@ static int i40e_alloc_adminq_asq_ring(struct i40e_hw *hw)
ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf,
(hw->aq.num_asq_entries *
- sizeof(struct i40e_aq_desc)),
+ sizeof(struct libie_aq_desc)),
I40E_ADMINQ_DESC_ALIGNMENT);
if (ret_code)
return ret_code;
@@ -44,7 +44,7 @@ static int i40e_alloc_adminq_arq_ring(struct i40e_hw *hw)
ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf,
(hw->aq.num_arq_entries *
- sizeof(struct i40e_aq_desc)),
+ sizeof(struct libie_aq_desc)),
I40E_ADMINQ_DESC_ALIGNMENT);
return ret_code;
@@ -80,7 +80,7 @@ static void i40e_free_adminq_arq(struct i40e_hw *hw)
**/
static int i40e_alloc_arq_bufs(struct i40e_hw *hw)
{
- struct i40e_aq_desc *desc;
+ struct libie_aq_desc *desc;
struct i40e_dma_mem *bi;
int ret_code;
int i;
@@ -108,9 +108,9 @@ static int i40e_alloc_arq_bufs(struct i40e_hw *hw)
/* now configure the descriptors for use */
desc = I40E_ADMINQ_DESC(hw->aq.arq, i);
- desc->flags = cpu_to_le16(I40E_AQ_FLAG_BUF);
+ desc->flags = cpu_to_le16(LIBIE_AQ_FLAG_BUF);
if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
- desc->flags |= cpu_to_le16(I40E_AQ_FLAG_LB);
+ desc->flags |= cpu_to_le16(LIBIE_AQ_FLAG_LB);
desc->opcode = 0;
/* This is in accordance with Admin queue design, there is no
* register for buffer size configuration
@@ -119,12 +119,12 @@ static int i40e_alloc_arq_bufs(struct i40e_hw *hw)
desc->retval = 0;
desc->cookie_high = 0;
desc->cookie_low = 0;
- desc->params.external.addr_high =
+ desc->params.generic.addr_high =
cpu_to_le32(upper_32_bits(bi->pa));
- desc->params.external.addr_low =
+ desc->params.generic.addr_low =
cpu_to_le32(lower_32_bits(bi->pa));
- desc->params.external.param0 = 0;
- desc->params.external.param1 = 0;
+ desc->params.generic.param0 = 0;
+ desc->params.generic.param1 = 0;
}
alloc_arq_bufs:
@@ -691,8 +691,8 @@ static u16 i40e_clean_asq(struct i40e_hw *hw)
struct i40e_adminq_ring *asq = &(hw->aq.asq);
struct i40e_asq_cmd_details *details;
u16 ntc = asq->next_to_clean;
- struct i40e_aq_desc desc_cb;
- struct i40e_aq_desc *desc;
+ struct libie_aq_desc desc_cb;
+ struct libie_aq_desc *desc;
desc = I40E_ADMINQ_DESC(*asq, ntc);
details = I40E_ADMINQ_DETAILS(*asq, ntc);
@@ -750,7 +750,7 @@ static bool i40e_asq_done(struct i40e_hw *hw)
**/
static int
i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
- struct i40e_aq_desc *desc,
+ struct libie_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details,
@@ -758,7 +758,7 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
{
struct i40e_dma_mem *dma_buff = NULL;
struct i40e_asq_cmd_details *details;
- struct i40e_aq_desc *desc_on_ring;
+ struct libie_aq_desc *desc_on_ring;
bool cmd_completed = false;
u16 retval = 0;
int status = 0;
@@ -771,7 +771,7 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
goto asq_send_command_error;
}
- hw->aq.asq_last_status = I40E_AQ_RC_OK;
+ hw->aq.asq_last_status = LIBIE_AQ_RC_OK;
val = rd32(hw, I40E_PF_ATQH);
if (val >= hw->aq.num_asq_entries) {
@@ -851,9 +851,9 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
/* Update the address values in the desc with the pa value
* for respective buffer
*/
- desc_on_ring->params.external.addr_high =
+ desc_on_ring->params.generic.addr_high =
cpu_to_le32(upper_32_bits(dma_buff->pa));
- desc_on_ring->params.external.addr_low =
+ desc_on_ring->params.generic.addr_low =
cpu_to_le32(lower_32_bits(dma_buff->pa));
}
@@ -905,13 +905,13 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
retval &= 0xff;
}
cmd_completed = true;
- if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
+ if ((enum libie_aq_err)retval == LIBIE_AQ_RC_OK)
status = 0;
- else if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_EBUSY)
+ else if ((enum libie_aq_err)retval == LIBIE_AQ_RC_EBUSY)
status = -EBUSY;
else
status = -EIO;
- hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
+ hw->aq.asq_last_status = (enum libie_aq_err)retval;
}
i40e_debug(hw, I40E_DEBUG_AQ_COMMAND,
@@ -954,7 +954,7 @@ asq_send_command_error:
**/
int
i40e_asq_send_command_atomic(struct i40e_hw *hw,
- struct i40e_aq_desc *desc,
+ struct libie_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details,
@@ -972,7 +972,7 @@ i40e_asq_send_command_atomic(struct i40e_hw *hw,
}
int
-i40e_asq_send_command(struct i40e_hw *hw, struct i40e_aq_desc *desc,
+i40e_asq_send_command(struct i40e_hw *hw, struct libie_aq_desc *desc,
void *buff, /* can be NULL */ u16 buff_size,
struct i40e_asq_cmd_details *cmd_details)
{
@@ -996,12 +996,12 @@ i40e_asq_send_command(struct i40e_hw *hw, struct i40e_aq_desc *desc,
**/
int
i40e_asq_send_command_atomic_v2(struct i40e_hw *hw,
- struct i40e_aq_desc *desc,
+ struct libie_aq_desc *desc,
void *buff, /* can be NULL */
u16 buff_size,
struct i40e_asq_cmd_details *cmd_details,
bool is_atomic_context,
- enum i40e_admin_queue_err *aq_status)
+ enum libie_aq_err *aq_status)
{
int status;
@@ -1023,13 +1023,13 @@ i40e_asq_send_command_atomic_v2(struct i40e_hw *hw,
*
* Fill the desc with default values
**/
-void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
+void i40e_fill_default_direct_cmd_desc(struct libie_aq_desc *desc,
u16 opcode)
{
/* zero out the desc */
- memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+ memset((void *)desc, 0, sizeof(struct libie_aq_desc));
desc->opcode = cpu_to_le16(opcode);
- desc->flags = cpu_to_le16(I40E_AQ_FLAG_SI);
+ desc->flags = cpu_to_le16(LIBIE_AQ_FLAG_SI);
}
/**
@@ -1047,7 +1047,7 @@ int i40e_clean_arq_element(struct i40e_hw *hw,
u16 *pending)
{
u16 ntc = hw->aq.arq.next_to_clean;
- struct i40e_aq_desc *desc;
+ struct libie_aq_desc *desc;
struct i40e_dma_mem *bi;
int ret_code = 0;
u16 desc_idx;
@@ -1081,9 +1081,9 @@ int i40e_clean_arq_element(struct i40e_hw *hw,
desc_idx = ntc;
hw->aq.arq_last_status =
- (enum i40e_admin_queue_err)le16_to_cpu(desc->retval);
+ (enum libie_aq_err)le16_to_cpu(desc->retval);
flags = le16_to_cpu(desc->flags);
- if (flags & I40E_AQ_FLAG_ERR) {
+ if (flags & LIBIE_AQ_FLAG_ERR) {
ret_code = -EIO;
i40e_debug(hw,
I40E_DEBUG_AQ_MESSAGE,
@@ -1107,14 +1107,14 @@ int i40e_clean_arq_element(struct i40e_hw *hw,
* size
*/
bi = &hw->aq.arq.r.arq_bi[ntc];
- memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+ memset((void *)desc, 0, sizeof(struct libie_aq_desc));
- desc->flags = cpu_to_le16(I40E_AQ_FLAG_BUF);
+ desc->flags = cpu_to_le16(LIBIE_AQ_FLAG_BUF);
if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
- desc->flags |= cpu_to_le16(I40E_AQ_FLAG_LB);
+ desc->flags |= cpu_to_le16(LIBIE_AQ_FLAG_LB);
desc->datalen = cpu_to_le16((u16)bi->size);
- desc->params.external.addr_high = cpu_to_le32(upper_32_bits(bi->pa));
- desc->params.external.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
+ desc->params.generic.addr_high = cpu_to_le32(upper_32_bits(bi->pa));
+ desc->params.generic.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
/* set tail = the last cleaned desc index. */
wr32(hw, I40E_PF_ARQT, ntc);