ice: read internal temperature sensor

Since 4.30 firmware exposes internal thermal sensor reading via admin
queue commands. Expose those readouts via hwmon API when supported.

Datasheet:

Get Sensor Reading Command (Opcode: 0x0632)

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Flags              | 1-0    |                    |                         |
| Opcode             | 2-3    | 0x0632             | Command opcode          |
| Datalen            | 4-5    | 0                  | No external buffer.     |
| Return value       | 6-7    |                    | Return value.           |
| Cookie High        | 8-11   | Cookie             |                         |
| Cookie Low         | 12-15  | Cookie             |                         |
| Sensor             | 16     |                    | 0x00: Internal temp     |
|                    |        |                    | 0x01-0xFF: Reserved.    |
| Format             | 17     | Requested response | Only 0x00 is supported. |
|                    |        | format             | 0x01-0xFF: Reserved.    |
| Reserved           | 18-23  |                    |                         |
| Data Address high  | 24-27  | Response buffer    |                         |
|                    |        | address            |                         |
| Data Address low   | 28-31  | Response buffer    |                         |
|                    |        | address            |                         |
+--------------------+--------+--------------------+-------------------------+

Get Sensor Reading Response (Opcode: 0x0632)

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Flags              | 1-0    |                    |                         |
| Opcode             | 2-3    | 0x0632             | Command opcode          |
| Datalen            | 4-5    | 0                  | No external buffer      |
| Return value       | 6-7    |                    | Return value.           |
|                    |        |                    | EINVAL: Invalid         |
|                    |        |                    | parameters              |
|                    |        |                    | ENOENT: Unsupported     |
|                    |        |                    | sensor                  |
|                    |        |                    | EIO: Sensor access      |
|                    |        |                    | error                   |
| Cookie High        | 8-11   | Cookie             |                         |
| Cookie Low         | 12-15  | Cookie             |                         |
| Sensor Reading     | 16-23  |                    | Format of the reading   |
|                    |        |                    | is dependent on request |
| Data Address high  | 24-27  | Response buffer    |                         |
|                    |        | address            |                         |
| Data Address low   | 28-31  | Response buffer    |                         |
|                    |        | address            |                         |
+--------------------+--------+--------------------+-------------------------+

Sensor Reading for Sensor 0x00 (Internal Chip Temperature):

+--------------------+--------+--------------------+-------------------------+
| Name               | Bytes  | Value              |          Remarks        |
+--------------------+--------+--------------------+-------------------------+
| Thermal Sensor     | 0      |                    | Reading in degrees      |
| reading            |        |                    | Celsius. Signed int8    |
| Warning High       | 1      |                    | Warning High threshold  |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Critical High      | 2      |                    | Critical High threshold |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Fatal High         | 3      |                    | Fatal High threshold    |
| threshold          |        |                    | in degrees Celsius.     |
|                    |        |                    | Unsigned int8.          |
|                    |        |                    | 0xFF when unsupported   |
| Reserved           | 4-7    |                    |                         |
+--------------------+--------+--------------------+-------------------------+

Driver provides current reading from HW as well as device specific
thresholds for thermal alarm (Warning, Critical, Fatal) events.

$ sensors

Output
=========================================================
ice-pci-b100
Adapter: PCI adapter
temp1:        +62.0°C  (high = +95.0°C, crit = +105.0°C)
                       (emerg = +115.0°C)

Tested on Intel Corporation Ethernet Controller E810-C for SFP

Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com>
Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

1 files changed, 53 insertions, 1 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 9a6c25f98632..8d97434e1413 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -2711,6 +2711,26 @@ ice_parse_fdir_dev_caps(struct ice_hw *hw, struct ice_hw_dev_caps *dev_p,
 }
 
 /**
+ * ice_parse_sensor_reading_cap - Parse ICE_AQC_CAPS_SENSOR_READING cap
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @cap: capability element to parse
+ *
+ * Parse ICE_AQC_CAPS_SENSOR_READING for device capability for reading
+ * enabled sensors.
+ */
+static void
+ice_parse_sensor_reading_cap(struct ice_hw *hw, struct ice_hw_dev_caps *dev_p,
+			     struct ice_aqc_list_caps_elem *cap)
+{
+	dev_p->supported_sensors = le32_to_cpu(cap->number);
+
+	ice_debug(hw, ICE_DBG_INIT,
+		  "dev caps: supported sensors (bitmap) = 0x%x\n",
+		  dev_p->supported_sensors);
+}
+
+/**
  * ice_parse_dev_caps - Parse device capabilities
  * @hw: pointer to the HW struct
  * @dev_p: pointer to device capabilities structure
@@ -2755,9 +2775,12 @@ ice_parse_dev_caps(struct ice_hw *hw, struct ice_hw_dev_caps *dev_p,
 		case ICE_AQC_CAPS_1588:
 			ice_parse_1588_dev_caps(hw, dev_p, &cap_resp[i]);
 			break;
-		case  ICE_AQC_CAPS_FD:
+		case ICE_AQC_CAPS_FD:
 			ice_parse_fdir_dev_caps(hw, dev_p, &cap_resp[i]);
 			break;
+		case ICE_AQC_CAPS_SENSOR_READING:
+			ice_parse_sensor_reading_cap(hw, dev_p, &cap_resp[i]);
+			break;
 		default:
 			/* Don't list common capabilities as unknown */
 			if (!found)
@@ -5541,6 +5564,35 @@ ice_aq_get_phy_rec_clk_out(struct ice_hw *hw, u8 *phy_output, u8 *port_num,
 }
 
 /**
+ * ice_aq_get_sensor_reading
+ * @hw: pointer to the HW struct
+ * @data: pointer to data to be read from the sensor
+ *
+ * Get sensor reading (0x0632)
+ */
+int ice_aq_get_sensor_reading(struct ice_hw *hw,
+			      struct ice_aqc_get_sensor_reading_resp *data)
+{
+	struct ice_aqc_get_sensor_reading *cmd;
+	struct ice_aq_desc desc;
+	int status;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_sensor_reading);
+	cmd = &desc.params.get_sensor_reading;
+#define ICE_INTERNAL_TEMP_SENSOR_FORMAT	0
+#define ICE_INTERNAL_TEMP_SENSOR	0
+	cmd->sensor = ICE_INTERNAL_TEMP_SENSOR;
+	cmd->format = ICE_INTERNAL_TEMP_SENSOR_FORMAT;
+
+	status = ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
+	if (!status)
+		memcpy(data, &desc.params.get_sensor_reading_resp,
+		       sizeof(*data));
+
+	return status;
+}
+
+/**
  * ice_replay_pre_init - replay pre initialization
  * @hw: pointer to the HW struct
  *