net: mdio: common handling of phy device reset properties

Unify the handling of the per device reset properties for
`mdio_device`.

Merge mdio_device_register_gpiod() and mdio_device_register_reset()
into mdio_device_register_reset(), that handles both
reset-controllers and reset-gpios.
Move reading of the reset firmware properties (reset-assert-us,
reset-deassert-us) from fwnode_mdio.c to mdio_device_register_reset(),
so all reset related initialization code is kept in one place.

Introduce mdio_device_unregister_reset() to release the associated
resources.

These changes make tracking the reset properties easier.
Added kernel-doc for mdio_device_register/unregister_reset().

Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/17c216efd7a47be17db104378b6aacfc8741d8b9.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 31 insertions, 9 deletions

diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index 0e04bddd3619..a4d9c6ccf876 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -119,8 +119,17 @@ void mdio_device_remove(struct mdio_device *mdiodev)
 }
 EXPORT_SYMBOL(mdio_device_remove);
 
-int mdio_device_register_gpiod(struct mdio_device *mdiodev)
+/**
+ * mdio_device_register_reset - Read and initialize the reset properties of
+ *				an mdio device
+ * @mdiodev: mdio_device structure
+ *
+ * Return: Zero if successful, negative error code on failure
+ */
+int mdio_device_register_reset(struct mdio_device *mdiodev)
 {
+	struct reset_control *reset;
+
 	/* Deassert the optional reset signal */
 	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
 						 "reset", GPIOD_OUT_LOW);
@@ -130,22 +139,35 @@ int mdio_device_register_gpiod(struct mdio_device *mdiodev)
 	if (mdiodev->reset_gpio)
 		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
 
-	return 0;
-}
-
-int mdio_device_register_reset(struct mdio_device *mdiodev)
-{
-	struct reset_control *reset;
-
 	reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
-	if (IS_ERR(reset))
+	if (IS_ERR(reset)) {
+		gpiod_put(mdiodev->reset_gpio);
+		mdiodev->reset_gpio = NULL;
 		return PTR_ERR(reset);
+	}
 
 	mdiodev->reset_ctrl = reset;
 
+	/* Read optional firmware properties */
+	fwnode_property_read_u32(dev_fwnode(&mdiodev->dev), "reset-assert-us",
+				 &mdiodev->reset_assert_delay);
+	fwnode_property_read_u32(dev_fwnode(&mdiodev->dev), "reset-deassert-us",
+				 &mdiodev->reset_deassert_delay);
+
 	return 0;
 }
 
+/**
+ * mdio_device_unregister_reset - uninitialize the reset properties of
+ *				  an mdio device
+ * @mdiodev: mdio_device structure
+ */
+void mdio_device_unregister_reset(struct mdio_device *mdiodev)
+{
+	gpiod_put(mdiodev->reset_gpio);
+	reset_control_put(mdiodev->reset_ctrl);
+}
+
 void mdio_device_reset(struct mdio_device *mdiodev, int value)
 {
 	unsigned int d;