Merge drm/drm-next into drm-xe-next-fixes

Backmerging to be able do to a clean PR.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

1 files changed, 21 insertions, 19 deletions

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index e595b0979a56..b4aad6604d6d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1764,32 +1764,33 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
 
 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
 {
-	unsigned long timeout = jiffies + WMI_SERVICE_READY_TIMEOUT_HZ;
 	unsigned long time_left, i;
 
-	/* Sometimes the PCI HIF doesn't receive interrupt
-	 * for the service ready message even if the buffer
-	 * was completed. PCIe sniffer shows that it's
-	 * because the corresponding CE ring doesn't fires
-	 * it. Workaround here by polling CE rings. Since
-	 * the message could arrive at any time, continue
-	 * polling until timeout.
-	 */
-	do {
+	time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
+						WMI_SERVICE_READY_TIMEOUT_HZ);
+	if (!time_left) {
+		/* Sometimes the PCI HIF doesn't receive interrupt
+		 * for the service ready message even if the buffer
+		 * was completed. PCIe sniffer shows that it's
+		 * because the corresponding CE ring doesn't fires
+		 * it. Workaround here by polling CE rings once.
+		 */
+		ath10k_warn(ar, "failed to receive service ready completion, polling..\n");
+
 		for (i = 0; i < CE_COUNT; i++)
 			ath10k_hif_send_complete_check(ar, i, 1);
 
-		/* The 100 ms granularity is a tradeoff considering scheduler
-		 * overhead and response latency
-		 */
 		time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
-							msecs_to_jiffies(100));
-		if (time_left)
-			return 0;
-	} while (time_before(jiffies, timeout));
+							WMI_SERVICE_READY_TIMEOUT_HZ);
+		if (!time_left) {
+			ath10k_warn(ar, "polling timed out\n");
+			return -ETIMEDOUT;
+		}
 
-	ath10k_warn(ar, "failed to receive service ready completion\n");
-	return -ETIMEDOUT;
+		ath10k_warn(ar, "service ready completion received, continuing normally\n");
+	}
+
+	return 0;
 }
 
 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar)
@@ -1937,6 +1938,7 @@ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id)
 	if (cmd_id == WMI_CMD_UNSUPPORTED) {
 		ath10k_warn(ar, "wmi command %d is not supported by firmware\n",
 			    cmd_id);
+		dev_kfree_skb_any(skb);
 		return ret;
 	}