Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

1 files changed, 35 insertions, 21 deletions

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d2291c3ceb8b..ffaded8f2df7 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -436,18 +436,18 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		return ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
-	if (res) {
-		pp->cfg0_size = resource_size(res);
-		pp->cfg0_base = res->start;
-
-		pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
-		if (IS_ERR(pp->va_cfg0_base))
-			return PTR_ERR(pp->va_cfg0_base);
-	} else {
-		dev_err(dev, "Missing *config* reg space\n");
+	if (!res) {
+		dev_err(dev, "Missing \"config\" reg space\n");
 		return -ENODEV;
 	}
 
+	pp->cfg0_size = resource_size(res);
+	pp->cfg0_base = res->start;
+
+	pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(pp->va_cfg0_base))
+		return PTR_ERR(pp->va_cfg0_base);
+
 	bridge = devm_pci_alloc_host_bridge(dev, 0);
 	if (!bridge)
 		return -ENOMEM;
@@ -530,8 +530,14 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_remove_edma;
 	}
 
-	/* Ignore errors, the link may come up later */
-	dw_pcie_wait_for_link(pci);
+	/*
+	 * Note: Skip the link up delay only when a Link Up IRQ is present.
+	 * If there is no Link Up IRQ, we should not bypass the delay
+	 * because that would require users to manually rescan for devices.
+	 */
+	if (!pp->use_linkup_irq)
+		/* Ignore errors, the link may come up later */
+		dw_pcie_wait_for_link(pci);
 
 	bridge->sysdata = pp;
 
@@ -918,7 +924,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 {
 	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 val;
-	int ret = 0;
+	int ret;
 
 	/*
 	 * If L1SS is supported, then do not put the link into L2 as some
@@ -927,25 +933,33 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
 		return 0;
 
-	if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT)
-		return 0;
-
-	if (pci->pp.ops->pme_turn_off)
+	if (pci->pp.ops->pme_turn_off) {
 		pci->pp.ops->pme_turn_off(&pci->pp);
-	else
+	} else {
 		ret = dw_pcie_pme_turn_off(pci);
+		if (ret)
+			return ret;
+	}
 
-	if (ret)
-		return ret;
-
-	ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
+	ret = read_poll_timeout(dw_pcie_get_ltssm, val,
+				val == DW_PCIE_LTSSM_L2_IDLE ||
+				val <= DW_PCIE_LTSSM_DETECT_WAIT,
 				PCIE_PME_TO_L2_TIMEOUT_US/10,
 				PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
 	if (ret) {
+		/* Only log message when LTSSM isn't in DETECT or POLL */
 		dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
 		return ret;
 	}
 
+	/*
+	 * Per PCIe r6.0, sec 5.3.3.2.1, software should wait at least
+	 * 100ns after L2/L3 Ready before turning off refclock and
+	 * main power. This is harmless when no endpoint is connected.
+	 */
+	udelay(1);
+
+	dw_pcie_stop_link(pci);
 	if (pci->pp.ops->deinit)
 		pci->pp.ops->deinit(&pci->pp);