Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

1 files changed, 7 insertions, 31 deletions

diff --git a/drivers/pci/controller/pcie-xilinx-cpm.c b/drivers/pci/controller/pcie-xilinx-cpm.c
index 4a787a941674..a0f5e1d67b04 100644
--- a/drivers/pci/controller/pcie-xilinx-cpm.c
+++ b/drivers/pci/controller/pcie-xilinx-cpm.c
@@ -16,11 +16,9 @@
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/pci-ecam.h>
 
 #include "../pci.h"
+#include "pcie-xilinx-common.h"
 
 /* Register definitions */
 #define XILINX_CPM_PCIE_REG_IDR		0x00000E10
@@ -38,29 +36,7 @@
 #define XILINX_CPM_PCIE_IR_ENABLE       0x000002A8
 #define XILINX_CPM_PCIE_IR_LOCAL        BIT(0)
 
-/* Interrupt registers definitions */
-#define XILINX_CPM_PCIE_INTR_LINK_DOWN		0
-#define XILINX_CPM_PCIE_INTR_HOT_RESET		3
-#define XILINX_CPM_PCIE_INTR_CFG_PCIE_TIMEOUT	4
-#define XILINX_CPM_PCIE_INTR_CFG_TIMEOUT	8
-#define XILINX_CPM_PCIE_INTR_CORRECTABLE	9
-#define XILINX_CPM_PCIE_INTR_NONFATAL		10
-#define XILINX_CPM_PCIE_INTR_FATAL		11
-#define XILINX_CPM_PCIE_INTR_CFG_ERR_POISON	12
-#define XILINX_CPM_PCIE_INTR_PME_TO_ACK_RCVD	15
-#define XILINX_CPM_PCIE_INTR_INTX		16
-#define XILINX_CPM_PCIE_INTR_PM_PME_RCVD	17
-#define XILINX_CPM_PCIE_INTR_SLV_UNSUPP		20
-#define XILINX_CPM_PCIE_INTR_SLV_UNEXP		21
-#define XILINX_CPM_PCIE_INTR_SLV_COMPL		22
-#define XILINX_CPM_PCIE_INTR_SLV_ERRP		23
-#define XILINX_CPM_PCIE_INTR_SLV_CMPABT		24
-#define XILINX_CPM_PCIE_INTR_SLV_ILLBUR		25
-#define XILINX_CPM_PCIE_INTR_MST_DECERR		26
-#define XILINX_CPM_PCIE_INTR_MST_SLVERR		27
-#define XILINX_CPM_PCIE_INTR_SLV_PCIE_TIMEOUT	28
-
-#define IMR(x) BIT(XILINX_CPM_PCIE_INTR_ ##x)
+#define IMR(x) BIT(XILINX_PCIE_INTR_ ##x)
 
 #define XILINX_CPM_PCIE_IMR_ALL_MASK			\
 	(						\
@@ -323,7 +299,7 @@ static void xilinx_cpm_pcie_event_flow(struct irq_desc *desc)
 }
 
 #define _IC(x, s)                              \
-	[XILINX_CPM_PCIE_INTR_ ## x] = { __stringify(x), s }
+	[XILINX_PCIE_INTR_ ## x] = { __stringify(x), s }
 
 static const struct {
 	const char      *sym;
@@ -359,9 +335,9 @@ static irqreturn_t xilinx_cpm_pcie_intr_handler(int irq, void *dev_id)
 	d = irq_domain_get_irq_data(port->cpm_domain, irq);
 
 	switch (d->hwirq) {
-	case XILINX_CPM_PCIE_INTR_CORRECTABLE:
-	case XILINX_CPM_PCIE_INTR_NONFATAL:
-	case XILINX_CPM_PCIE_INTR_FATAL:
+	case XILINX_PCIE_INTR_CORRECTABLE:
+	case XILINX_PCIE_INTR_NONFATAL:
+	case XILINX_PCIE_INTR_FATAL:
 		cpm_pcie_clear_err_interrupts(port);
 		fallthrough;
 
@@ -466,7 +442,7 @@ static int xilinx_cpm_setup_irq(struct xilinx_cpm_pcie *port)
 	}
 
 	port->intx_irq = irq_create_mapping(port->cpm_domain,
-					    XILINX_CPM_PCIE_INTR_INTX);
+					    XILINX_PCIE_INTR_INTX);
 	if (!port->intx_irq) {
 		dev_err(dev, "Failed to map INTx interrupt\n");
 		return -ENXIO;