usb: xhci: change xhci_resume() parameters to explicit the desired info

Previous signature was:

        int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg);

Internally, it extracted two information out of the message:
 - whether we are after hibernation: msg.event == PM_EVENT_RESTORE,
 - whether this is an auto resume: msg.event == PM_EVENT_AUTO_RESUME.

First bulletpoint is somewhat wrong: driver wants to know if the device
did lose power, it doesn't care about hibernation per se. Knowing that,
refactor to ask upper layers the right questions: (1) "did we lose
power?" and, (2) "is this an auto resume?". Change the signature to:

        int xhci_resume(struct xhci_hcd *xhci, bool power_lost,
                        bool is_auto_resume);

The goal is to allow some upper layers (cdns3-plat) to tell us when
power was lost after system-wise suspend.

Note that lost_power is ORed at the start of xhci_resume() to
xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend. It is
simpler to keep those checks inside of xhci_resume() instead of doing
them at each caller of xhci_resume().

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20250205-s2r-cdns-v7-7-13658a271c3c@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 8 insertions, 11 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 19e308f4fc06..83a4adf57bae 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -994,16 +994,14 @@ EXPORT_SYMBOL_GPL(xhci_suspend);
  * This is called when the machine transition from S3/S4 mode.
  *
  */
-int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
+int xhci_resume(struct xhci_hcd *xhci, bool power_lost, bool is_auto_resume)
 {
-	bool			hibernated = (msg.event == PM_EVENT_RESTORE);
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	int			retval = 0;
 	bool			comp_timer_running = false;
 	bool			pending_portevent = false;
 	bool			suspended_usb3_devs = false;
-	bool			reinit_xhc = false;
 
 	if (!hcd->state)
 		return 0;
@@ -1022,10 +1020,10 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 
 	spin_lock_irq(&xhci->lock);
 
-	if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
-		reinit_xhc = true;
+	if (xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+		power_lost = true;
 
-	if (!reinit_xhc) {
+	if (!power_lost) {
 		/*
 		 * Some controllers might lose power during suspend, so wait
 		 * for controller not ready bit to clear, just as in xHC init.
@@ -1065,12 +1063,12 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 	/* re-initialize the HC on Restore Error, or Host Controller Error */
 	if ((temp & (STS_SRE | STS_HCE)) &&
 	    !(xhci->xhc_state & XHCI_STATE_REMOVING)) {
-		reinit_xhc = true;
-		if (!xhci->broken_suspend)
+		if (!power_lost)
 			xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+		power_lost = true;
 	}
 
-	if (reinit_xhc) {
+	if (power_lost) {
 		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
 				!(xhci_all_ports_seen_u0(xhci))) {
 			del_timer_sync(&xhci->comp_mode_recovery_timer);
@@ -1168,8 +1166,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 
 		pending_portevent = xhci_pending_portevent(xhci);
 
-		if (suspended_usb3_devs && !pending_portevent &&
-		    msg.event == PM_EVENT_AUTO_RESUME) {
+		if (suspended_usb3_devs && !pending_portevent && is_auto_resume) {
 			msleep(120);
 			pending_portevent = xhci_pending_portevent(xhci);
 		}