Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is the usual collection of primarily clk driver updates.

  The big part of the diff is all the new Qualcomm clk drivers added for
  a few SoCs they're working on. The other two vendors with significant
  work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
  to existing drivers and supports some new SoCs while Amlogic is
  starting a significant refactoring to simplify their code.

  The core framework gained a pair of helpers to get the 'struct device'
  or 'struct device_node' associated with a 'struct clk_hw'. Some
  associated KUnit tests were added for these simple helpers as well.

  Beyond that core change there are lots of little fixes throughout the
  clk drivers for the stuff we see every day, wrong clk driver data that
  affects tree topology or supported frequencies, etc. They're not found
  until the clks are actually used by some consumer device driver.

  New Drivers:
   - Global, display, gpu, video, camera, tcsr, and rpmh clock
     controller for the Qualcomm Milos SoC
   - Camera, display, GPU, and video clock controllers for Qualcomm
     QCS615
   - Video clock controller driver for Qualcomm SM6350
   - Camera clock controller driver for Qualcomm SC8180X
   - I3C clocks and resets on Renesas RZ/G3E
   - Expanded Serial Peripheral Interface (xSPI) clocks and resets on
     Renesas RZ/V2H(P) and RZ/V2N
   - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
   - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
   - Ethernet clocks and resets on Renesas RZ/G3E
   - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
     (R9A09G087) SoCs
   - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
   - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
     RZ/V2N

  Updates:
   - Support atomic PWMs in the PWM clk driver
   - clk_hw_get_dev() and clk_hw_get_of_node() helpers
   - Replace round_rate() with determine_rate() in various clk drivers
   - Convert clk DT bindings to DT schema format for DT validation
   - Various clk driver cleanups and refactorings from static analysis
     tools and possibly real humans
   - A lot of little fixes here and there to things like clk tree
     topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
  clk: clocking-wizard: Fix the round rate handling for versal
  clk: Fix typos
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  clk: tegra: periph: Make tegra_clk_periph_ops static
  clk: tegra: periph: Fix error handling and resolve unsigned compare warning
  clk: imx: scu: convert from round_rate() to determine_rate()
  clk: imx: pllv4: convert from round_rate() to determine_rate()
  clk: imx: pllv3: convert from round_rate() to determine_rate()
  clk: imx: pllv2: convert from round_rate() to determine_rate()
  clk: imx: pll14xx: convert from round_rate() to determine_rate()
  clk: imx: pfd: convert from round_rate() to determine_rate()
  clk: imx: frac-pll: convert from round_rate() to determine_rate()
  clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
  clk: imx: fixup-div: convert from round_rate() to determine_rate()
  clk: imx: cpu: convert from round_rate() to determine_rate()
  clk: imx: busy: convert from round_rate() to determine_rate()
  clk: imx: composite-93: remove round_rate() in favor of determine_rate()
  clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
  clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
  clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
  ...

1 files changed, 160 insertions, 0 deletions

diff --git a/include/soc/spacemit/k1-syscon.h b/include/soc/spacemit/k1-syscon.h
new file mode 100644
index 000000000000..c59bd7a38e5b
--- /dev/null
+++ b/include/soc/spacemit/k1-syscon.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/* SpacemiT clock and reset driver definitions for the K1 SoC */
+
+#ifndef __SOC_K1_SYSCON_H__
+#define __SOC_K1_SYSCON_H__
+
+/* Auxiliary device used to represent a CCU reset controller */
+struct spacemit_ccu_adev {
+	struct auxiliary_device adev;
+	struct regmap *regmap;
+};
+
+static inline struct spacemit_ccu_adev *
+to_spacemit_ccu_adev(struct auxiliary_device *adev)
+{
+	return container_of(adev, struct spacemit_ccu_adev, adev);
+}
+
+/* APBS register offset */
+#define APBS_PLL1_SWCR1			0x100
+#define APBS_PLL1_SWCR2			0x104
+#define APBS_PLL1_SWCR3			0x108
+#define APBS_PLL2_SWCR1			0x118
+#define APBS_PLL2_SWCR2			0x11c
+#define APBS_PLL2_SWCR3			0x120
+#define APBS_PLL3_SWCR1			0x124
+#define APBS_PLL3_SWCR2			0x128
+#define APBS_PLL3_SWCR3			0x12c
+
+/* MPMU register offset */
+#define MPMU_POSR			0x0010
+#define  POSR_PLL1_LOCK			BIT(27)
+#define  POSR_PLL2_LOCK			BIT(28)
+#define  POSR_PLL3_LOCK			BIT(29)
+#define MPMU_SUCCR			0x0014
+#define MPMU_ISCCR			0x0044
+#define MPMU_WDTPCR			0x0200
+#define MPMU_RIPCCR			0x0210
+#define MPMU_ACGR			0x1024
+#define MPMU_APBCSCR			0x1050
+#define MPMU_SUCCR_1			0x10b0
+
+/* APBC register offset */
+#define APBC_UART1_CLK_RST		0x00
+#define APBC_UART2_CLK_RST		0x04
+#define APBC_GPIO_CLK_RST		0x08
+#define APBC_PWM0_CLK_RST		0x0c
+#define APBC_PWM1_CLK_RST		0x10
+#define APBC_PWM2_CLK_RST		0x14
+#define APBC_PWM3_CLK_RST		0x18
+#define APBC_TWSI8_CLK_RST		0x20
+#define APBC_UART3_CLK_RST		0x24
+#define APBC_RTC_CLK_RST		0x28
+#define APBC_TWSI0_CLK_RST		0x2c
+#define APBC_TWSI1_CLK_RST		0x30
+#define APBC_TIMERS1_CLK_RST		0x34
+#define APBC_TWSI2_CLK_RST		0x38
+#define APBC_AIB_CLK_RST		0x3c
+#define APBC_TWSI4_CLK_RST		0x40
+#define APBC_TIMERS2_CLK_RST		0x44
+#define APBC_ONEWIRE_CLK_RST		0x48
+#define APBC_TWSI5_CLK_RST		0x4c
+#define APBC_DRO_CLK_RST		0x58
+#define APBC_IR_CLK_RST			0x5c
+#define APBC_TWSI6_CLK_RST		0x60
+#define APBC_COUNTER_CLK_SEL		0x64
+#define APBC_TWSI7_CLK_RST		0x68
+#define APBC_TSEN_CLK_RST		0x6c
+#define APBC_UART4_CLK_RST		0x70
+#define APBC_UART5_CLK_RST		0x74
+#define APBC_UART6_CLK_RST		0x78
+#define APBC_SSP3_CLK_RST		0x7c
+#define APBC_SSPA0_CLK_RST		0x80
+#define APBC_SSPA1_CLK_RST		0x84
+#define APBC_IPC_AP2AUD_CLK_RST		0x90
+#define APBC_UART7_CLK_RST		0x94
+#define APBC_UART8_CLK_RST		0x98
+#define APBC_UART9_CLK_RST		0x9c
+#define APBC_CAN0_CLK_RST		0xa0
+#define APBC_PWM4_CLK_RST		0xa8
+#define APBC_PWM5_CLK_RST		0xac
+#define APBC_PWM6_CLK_RST		0xb0
+#define APBC_PWM7_CLK_RST		0xb4
+#define APBC_PWM8_CLK_RST		0xb8
+#define APBC_PWM9_CLK_RST		0xbc
+#define APBC_PWM10_CLK_RST		0xc0
+#define APBC_PWM11_CLK_RST		0xc4
+#define APBC_PWM12_CLK_RST		0xc8
+#define APBC_PWM13_CLK_RST		0xcc
+#define APBC_PWM14_CLK_RST		0xd0
+#define APBC_PWM15_CLK_RST		0xd4
+#define APBC_PWM16_CLK_RST		0xd8
+#define APBC_PWM17_CLK_RST		0xdc
+#define APBC_PWM18_CLK_RST		0xe0
+#define APBC_PWM19_CLK_RST		0xe4
+
+/* APMU register offset */
+#define APMU_JPG_CLK_RES_CTRL		0x020
+#define APMU_CSI_CCIC2_CLK_RES_CTRL	0x024
+#define APMU_ISP_CLK_RES_CTRL		0x038
+#define APMU_LCD_CLK_RES_CTRL1		0x044
+#define APMU_LCD_SPI_CLK_RES_CTRL	0x048
+#define APMU_LCD_CLK_RES_CTRL2		0x04c
+#define APMU_CCIC_CLK_RES_CTRL		0x050
+#define APMU_SDH0_CLK_RES_CTRL		0x054
+#define APMU_SDH1_CLK_RES_CTRL		0x058
+#define APMU_USB_CLK_RES_CTRL		0x05c
+#define APMU_QSPI_CLK_RES_CTRL		0x060
+#define APMU_DMA_CLK_RES_CTRL		0x064
+#define APMU_AES_CLK_RES_CTRL		0x068
+#define APMU_VPU_CLK_RES_CTRL		0x0a4
+#define APMU_GPU_CLK_RES_CTRL		0x0cc
+#define APMU_SDH2_CLK_RES_CTRL		0x0e0
+#define APMU_PMUA_MC_CTRL		0x0e8
+#define APMU_PMU_CC2_AP			0x100
+#define APMU_PMUA_EM_CLK_RES_CTRL	0x104
+#define APMU_AUDIO_CLK_RES_CTRL		0x14c
+#define APMU_HDMI_CLK_RES_CTRL		0x1b8
+#define APMU_CCI550_CLK_CTRL		0x300
+#define APMU_ACLK_CLK_CTRL		0x388
+#define APMU_CPU_C0_CLK_CTRL		0x38C
+#define APMU_CPU_C1_CLK_CTRL		0x390
+#define APMU_PCIE_CLK_RES_CTRL_0	0x3cc
+#define APMU_PCIE_CLK_RES_CTRL_1	0x3d4
+#define APMU_PCIE_CLK_RES_CTRL_2	0x3dc
+#define APMU_EMAC0_CLK_RES_CTRL		0x3e4
+#define APMU_EMAC1_CLK_RES_CTRL		0x3ec
+
+/* RCPU register offsets */
+#define RCPU_SSP0_CLK_RST		0x0028
+#define RCPU_I2C0_CLK_RST		0x0030
+#define RCPU_UART1_CLK_RST		0x003c
+#define RCPU_CAN_CLK_RST		0x0048
+#define RCPU_IR_CLK_RST			0x004c
+#define RCPU_UART0_CLK_RST		0x00d8
+#define AUDIO_HDMI_CLK_CTRL		0x2044
+
+/* RCPU2 register offsets */
+#define RCPU2_PWM0_CLK_RST		0x0000
+#define RCPU2_PWM1_CLK_RST		0x0004
+#define RCPU2_PWM2_CLK_RST		0x0008
+#define RCPU2_PWM3_CLK_RST		0x000c
+#define RCPU2_PWM4_CLK_RST		0x0010
+#define RCPU2_PWM5_CLK_RST		0x0014
+#define RCPU2_PWM6_CLK_RST		0x0018
+#define RCPU2_PWM7_CLK_RST		0x001c
+#define RCPU2_PWM8_CLK_RST		0x0020
+#define RCPU2_PWM9_CLK_RST		0x0024
+
+/* APBC2 register offsets */
+#define APBC2_UART1_CLK_RST		0x0000
+#define APBC2_SSP2_CLK_RST		0x0004
+#define APBC2_TWSI3_CLK_RST		0x0008
+#define APBC2_RTC_CLK_RST		0x000c
+#define APBC2_TIMERS0_CLK_RST		0x0010
+#define APBC2_KPC_CLK_RST		0x0014
+#define APBC2_GPIO_CLK_RST		0x001c
+
+#endif /* __SOC_K1_SYSCON_H__ */